1445 Commits

Author	SHA1	Message	Date
Dirk O. Kaar	d0e1166cce	Fix Visual Micro "Arduino IDE for Visual Studio" support (#16418)	2020-01-02 19:01:38 -06:00
InsanityAutomation	1c9ccce520	Add NOZZLE_AS_PROBE (no probe offsets) (#15929)	2019-12-24 00:03:08 -06:00
randellhodges	0b6c2d893e	Fix G34 with Z_DUAL_STEPPER_DRIVERS compile (#16274)	2019-12-20 22:03:37 -06:00
Scott Lahteine	deff538909	Fix broken M100_dump_routine	2019-12-19 21:02:14 -06:00
Scott Lahteine	b49a0e39d5	HOME_USING_SPREADCYCLE is obsolete ... Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>	2019-12-19 16:02:57 -06:00
Scott Lahteine	865071a946	Tweak code formatting	2019-12-19 02:16:17 -06:00
Moshi Binyamini	dcdaa2025f	Sanity-check Z_STEPPER_AUTO_ALIGN coordinates (#16231)	2019-12-19 00:59:01 -06:00
Scott Lahteine	0400783444	Tweak G34, fix a declaration	2019-12-19 00:42:39 -06:00
danym21	6e8dcba698	Fix G28 debug line, M569 calls (#16213)	2019-12-15 12:00:00 -06:00
Luu Lac	e9dadacf7b	Fix bad #ifdef (#16227)	2019-12-15 11:16:36 -06:00
Scott Lahteine	f3d64b7115	Cardreader read/write open methods	2019-12-12 18:46:49 -06:00
Scott Lahteine	83a4e8559c	Followup to "optimize common strings"	2019-11-30 08:18:23 -06:00
Felicia Hummel	690ed531b6	Configurable PSU power-on delay (#16050)	2019-11-30 07:17:24 -06:00
Scott Lahteine	1ee648ecd2	Followup to "optimize common strings"	2019-11-30 06:55:32 -06:00
Scott Lahteine	f83bc0aa13	Optimize common strings ... Saves 128 bytes in testing with `mftest mega 1 -y`	2019-11-29 22:54:42 -06:00
BigTreeTech	441ee3e53f	Add 'M114 E' to get E position (M114_DETAIL) (#16026)	2019-11-29 06:53:32 -06:00
Jason Smith	752a1e76ab	Float ABL mesh boundaries, no probe position rounding (#16018)	2019-11-27 01:29:25 -06:00
Scott Lahteine	98f83dc756	Add comments to G29	2019-11-27 01:05:22 -06:00
haschtl	ff6518c0a8	Add PID_FAN_SCALING option (#15585)	2019-11-26 03:34:43 -06:00
lukasmatena	8ccfdaca02	Add M220 B/R with PRUSA_MMU2 (#15739)	2019-11-26 03:34:18 -06:00
Scott Lahteine	1d150e41b6	Reduce MMU2 code, add test	2019-11-26 02:15:31 -06:00
InsanityAutomation	2142beb2e5	Fix UI compile error in UBL (#15981)	2019-11-24 17:04:19 -06:00
Scott Lahteine	b11551c767	Touch UI updates for Cocoa Press (#15986)	2019-11-24 06:08:05 -06:00
Denis Semenov	0fcd1f4a49	Fix HAS_CLASSIC_E_JERK and related issues (#15968)	2019-11-23 15:56:07 -06:00
Jason Smith	b904ba0f29	Improve Delta probing / calibration (#15887)	2019-11-21 03:26:00 -06:00
Jason Smith	4ede13e36a	Fix G29 for updated meshCount type (#15960)	2019-11-21 03:19:56 -06:00
BigTreeTech	ab8b24fdba	Power Loss Recovery with a UPS (#15943)	2019-11-20 17:40:21 -06:00
Scott Lahteine	ab9f0f2c4f	Followup to meshCount patch	2019-11-20 04:57:04 -06:00
InsanityAutomation	798f34abcd	Float XY probe offset followup (probe edge) (#15928)	2019-11-19 23:29:52 -06:00
Evgeny-SPB	7116a8645c	G34 logic / typo fix (#15938)	2019-11-19 23:25:07 -06:00
InsanityAutomation	4d4e692c81	Match onMeshUpdate() index sign (#15920)	2019-11-19 23:16:43 -06:00
Roxy-3D	f19fa64e98	Eliminate multiple settings to extruder_duplication_enabled in G28 ... If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode... It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'. It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28. The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.	2019-11-15 15:42:01 -06:00
Scott Lahteine	602ca5dea6	No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY	2019-11-13 02:07:17 -06:00
Roman Moravčík	e110f5abce	M73 R : Set Remaining Time (#15549)	2019-11-12 19:36:54 -06:00
danym21	28e1614c2e	Add Sensorless Homing current (#15690)	2019-11-10 18:45:06 -06:00
Jason Smith	770adcfa15	Raise Z before homing X/Y on unknown Z (#15859)	2019-11-10 16:21:20 -06:00
ellensp	7b29c60c46	Fix compile with chamber enabled (#15862)	2019-11-10 16:15:08 -06:00
Scott Lahteine	776632c503	Add and apply REPEAT macro (#15829)	2019-11-09 17:59:04 -06:00
Scott Lahteine	ca6d00b862	Save some string flash	2019-11-02 00:48:05 -05:00
Scott Lahteine	ad28da7eb4	Patch ABL G29 loop ... Followup to e3ddf6e81a	2019-11-01 15:39:05 -05:00
Scott Lahteine	e7d9db284e	Followup to M240 patch	2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez	7c60853219	Fix blocking delay in Photo G-code M240 (#15728)	2019-10-31 17:14:11 -05:00
Scott Lahteine	4e6e02bc3e	Include pause.h for M701-702	2019-10-31 13:18:50 -05:00
Scott Lahteine	e3ddf6e81a	Fix meshCount signed-ness	2019-10-31 13:18:50 -05:00
Scott Lahteine	c80eda073f	M119 => report_states	2019-10-30 15:24:10 -05:00
Scott Lahteine	7a342ecb93	Show Total E during print (#15703)	2019-10-27 17:49:27 -05:00
Scott Lahteine	ab0fe1a7dd	Tweak G29 faux point	2019-10-26 14:41:54 -05:00
Scott Lahteine	732bf89878	Get 'cancelable' for gcode.cpp	2019-10-25 19:38:23 -05:00
Scott Lahteine	014b739bac	Fix M486 int parameters	2019-10-25 19:19:33 -05:00
Scott Lahteine	93f0012959	Cancel Objects - As seen at ERRF2019 (#15590)	2019-10-24 15:35:40 -05:00
InsanityAutomation	82fb046013	Allow suicide pin inverting (#15586)	2019-10-24 14:07:28 -05:00
Jacob Jordan	9895e6d766	Only use slow homing speed where applicable (#15640)	2019-10-24 13:14:45 -05:00
Robby Candra	cf8541a7a7	Fix G92.9 (thus PLR Z position) (#15625)	2019-10-24 13:05:50 -05:00
Scott Lahteine	cd3ec5a77b	Add error-check to M422	2019-10-24 12:59:50 -05:00
milkpirate	6bcd4eb12d	Fix M420 (UBL) undefined variables (#15621)	2019-10-24 12:07:17 -05:00
Scott Lahteine	af214ff121	Fix up PSU_CONTROL checks	2019-10-22 16:16:12 -05:00
Scott Lahteine	160c8be191	Fix BABYSTEP_DISPLAY_TOTAL output	2019-10-21 13:53:19 -05:00
Scott Lahteine	0652f19673	Fix M420 for moved probe methods	2019-10-16 15:56:34 -05:00
Scott Lahteine	bb381e22b2	Fix left-shift warning	2019-10-16 15:42:46 -05:00
Bo Herrmannsen	0d7736d663	Enable M191 (#15531)	2019-10-16 15:02:37 -05:00
Jason Smith	832cb7e1ac	Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195)	2019-10-16 13:39:58 -05:00
Scott Lahteine	b7b303f4bf	Spindle/Laser power in planner blocks (#14437)	2019-10-15 16:10:20 -05:00
Scott Lahteine	faacfe13c2	Tweak M105 layout	2019-10-15 13:35:13 -05:00
Antti Andreimann	d47f29bd4c	Give a dummy response to M105 with zero thermistors (#15568)	2019-10-15 13:30:52 -05:00
Robby Candra	e79666a82b	Followup to "Fix G2/G3 rounding" (#15510)	2019-10-10 21:16:37 -05:00
LinFor	b20d5a7cc6	Estimate Remaining Time (graphical display) (#15497)	2019-10-10 21:03:33 -05:00
Ed Williams	d8aeeb8ff6	Fix G2/G3 rounding error (#15507)	2019-10-10 19:50:08 -05:00
Marcio Teixeira	6a865a6146	Multi-language support (#15453)	2019-10-09 19:46:10 -05:00
Scott Lahteine	c0005e939c	Enable junction deviation by default (#15481)	2019-10-08 19:42:18 -05:00
Scott Lahteine	e84389c976	Fix G2/G3 workspace plane parameters (#15475)	2019-10-07 17:09:20 -05:00
LinFor	19b7be067c	Allow M73 to override SD position (#15449)	2019-10-07 16:38:58 -05:00
Scott Lahteine	56595a4c9c	Improve G2/G3 precision ... See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253	2019-10-07 00:03:17 -05:00
Scott Lahteine	519cc1bc67	NUM_AXIS is now obsolete	2019-10-06 22:18:16 -05:00
Scott Lahteine	0322348924	Handle runout in runout.cpp	2019-10-03 06:27:30 -05:00
Oliver Jean Eifler	d52b908627	Fix coordinate size for G26 w/out arcs (#15443)	2019-10-01 20:02:27 -05:00
InsanityAutomation	438835f6a5	Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929)	2019-10-01 19:59:48 -05:00
Scott Lahteine	e3fd0519b3	Reduce need for UNUSED	2019-09-30 22:56:22 -05:00
Scott Lahteine	139b7196a0	Watchdog cleanup (#15283)	2019-09-29 17:57:29 -05:00
Scott Lahteine	f307ff68f7	Multiply by float, not double	2019-09-29 17:25:27 -05:00
Alex Somesan	10bbed7f69	Fix comma/semicolon typo (#15420)	2019-09-29 16:50:53 -05:00
Scott Lahteine	50e4545255	Add custom types for position (#15204)	2019-09-29 04:25:39 -05:00
Scott Lahteine	7c5e6900e1	Tweak comment	2019-09-28 22:08:02 -05:00
InsanityAutomation	0ca6abce72	Add reporting to M290 (#15376)	2019-09-28 16:58:48 -05:00
InsanityAutomation	a6b0223eea	Revive and improve DELTA probe bounds, LRFB options (#15372)	2019-09-28 01:19:11 -05:00
InsanityAutomation	5221e2d991	Restore Host Prompt Info (#15387)	2019-09-27 17:06:26 -05:00
Scott Lahteine	d683f98019	Return buffer in duration.toString	2019-09-27 04:45:01 -05:00
Marcio Teixeira	a18d16fb8b	Do not implicitly concatenate localized strings (#15383)	2019-09-27 04:38:43 -05:00
Scott Lahteine	665e45e0ba	Reduce string storage, use masking 'seen'	2019-09-26 04:30:55 -05:00
Scott Lahteine	455dabb183	Add a feedRate_t data type (#15349)	2019-09-26 01:28:09 -05:00
Scott Lahteine	b2e1f77f58	Fix extraneous "Home XYZ First" message	2019-09-25 21:57:20 -05:00
Scott Lahteine	25c4c2f24e	Fix bool in M851	2019-09-25 08:39:11 -05:00
Scott Lahteine	da1bda493e	Apply Marlin conventions to M851	2019-09-25 03:57:16 -05:00
InsanityAutomation	e9cf46a9a5	M851 XY 3 point followup (incomplete) (#15361)	2019-09-25 02:43:41 -05:00
Robby Candra	9c288a682d	Followup to probe_at_point change (#15342)	2019-09-25 02:29:10 -05:00
Scott Lahteine	5288c399ce	Patch probe offset name, defines	2019-09-24 23:39:23 -05:00
Scott Lahteine	4e8d9fe59b	zprobe_offset => probe_offset	2019-09-24 23:36:09 -05:00
InsanityAutomation	df1e51258a	Add M851 X Y probe offsets (#15202)	2019-09-24 21:29:21 -05:00
Scott Lahteine	5e13fe989f	Rename some feedrate-oriented functions	2019-09-23 22:36:41 -05:00
Scott Lahteine	13d725d24d	Tweak debug messages	2019-09-20 23:35:22 -05:00
Scott Lahteine	1a1375964f	Drop unused G26 function	2019-09-18 04:07:14 -05:00
Scott Lahteine	b71a755a30	Add float suffix in G33	2019-09-17 23:30:27 -05:00
Scott Lahteine	c353eaa146	Misc changes from struct refactor (#15289)	2019-09-17 18:16:28 -05:00
Bas Stottelaar	847e4ced11	Fix M43 without watchdog (#15280)	2019-09-16 16:09:43 -05:00
Scott Lahteine	d5f5203880	Use "mount" as card verb	2019-09-15 03:12:44 -05:00
Scott Lahteine	465c6d9230	Simpler Allen Key config. Fixes, cleanups from refactor (#15256)	2019-09-14 03:05:10 -05:00
Scott Lahteine	f9992c5f33	Implausible	2019-09-11 02:52:14 -05:00
Scott Lahteine	6091e6300a	Fix G90, G91, M82, M83 rel/abs modes (#15218)	2019-09-11 01:29:33 -05:00
Scott Lahteine	c590e8ac05	Improve Power-loss Recovery (#15135)	2019-09-10 18:52:41 -05:00
Scott Lahteine	75927e17dd	Filament Width Sensor singleton (#15191)	2019-09-10 18:48:58 -05:00
Scott Lahteine	584c86bed1	More "zero extruders" changes (#15213)	2019-09-10 02:20:49 -05:00
Scott Lahteine	841c8ce0d9	Remove PROMPT_INFO / PROMPT_GCODE_INFO (#15210)	2019-09-09 15:43:06 -05:00
InsanityAutomation	0693767efa	ExtUI Pause/Stop on all Pause/Stop (#15188)	2019-09-08 01:47:07 -05:00
Lucio Tarantino	8ac52aedff	M118 multiserial support (#15176)	2019-09-08 00:57:59 -05:00
Jamie	dbee0e9c54	Analog joystick jogging control (#14648)	2019-09-08 00:55:34 -05:00
Ludy	068c303742	More translatable LCD strings (#15190)	2019-09-08 00:15:25 -05:00
Scott Lahteine	7496e1cd67	whitespace	2019-09-04 21:55:41 -05:00
Jamie	293b890940	Apply soft limits to G2/G3 final target (#15156)	2019-09-04 13:02:30 -05:00
Giuliano Zaro	9958f5e322	Home on G34 if steppers slept (#15127)	2019-09-02 02:44:48 -05:00
Scott Lahteine	a2e412c0ce	Rename command buffer var	2019-09-01 20:43:31 -05:00
Scott Lahteine	586b334c2a	Split up stepper indirection (#15111)	2019-08-31 19:44:45 -05:00
Luu Lac	081e4506ca	Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (#15069)	2019-08-28 04:20:28 -05:00
InsanityAutomation	b7796bcce6	Disable steppers on M112 (#15065) ... And change verbiage to not refer to "Emergency Stop."	2019-08-28 00:51:01 -05:00
InsanityAutomation	f218405c36	Fix ExtUI invalid speed, timer (#15031)	2019-08-25 04:46:02 -05:00
Scott Lahteine	dd6efe96e7	Restore documented M503 behavior	2019-08-22 18:58:11 -05:00
InsanityAutomation	af5a7a2925	Add missing ExtUI user confirmation (#14992)	2019-08-18 21:03:26 -05:00
Marcio Teixeira	274934ad81	Add LULZBOT_TOUCH_UI (#14967)	2019-08-16 18:34:13 -05:00
Marcio Teixeira	179d6c4ed1	Add STARTUP_SCRIPT option. M17 parity with M18. (#14953)	2019-08-14 21:05:15 -05:00
Joseph Bozarth	0fbb26c28f	M16 - Expected Printer Check (#14924)	2019-08-13 23:38:45 -05:00
Scott Lahteine	c8e30b6639	Fix code attempting to sprintf %f (#14869) ... Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.	2019-08-08 01:51:37 -05:00
Chris Pepper	f499cecf0d	Marlin Binary Protocol Mark II (#14817)	2019-08-05 20:41:53 -05:00
Acenotass	4af9908764	Update M48 command in the status line (#14816)	2019-08-05 20:01:40 -05:00
teemuatlut	d4974ea719	TMC SPI Endstops and Improved Sensorless Homing (#14044)	2019-08-04 22:22:58 -05:00
InsanityAutomation	f59a7e8b07	Print/display ABL current probe point (#14788)	2019-08-01 20:11:26 -05:00
InsanityAutomation	6f8b8c394d	Homing backoff per-axis / delta Z (#14789)	2019-07-31 20:50:23 -05:00
Scott Lahteine	c2b319360d	Remove extra pragmas	2019-07-30 20:19:47 -05:00
Acenotass	659d06d9b9	M48 menu item, result to status (#14772)	2019-07-30 02:31:14 -05:00
rafaljot	e44fccf3d2	Add support for M575 (#14757)	2019-07-30 02:30:00 -05:00
Scott Lahteine	eae543adf3	Apply HAS_SPI_LCD as needed	2019-07-29 18:55:05 -05:00
Giuliano Zaro	290466578f	Adafruit Grand Central M4 (#14749)	2019-07-28 14:48:29 -05:00
Scott Lahteine	17abb94532	Whitespace patch	2019-07-28 01:29:23 -05:00
Ludy	97e9c95f47	Fix & clean up ExtUI (#14748)	2019-07-27 22:44:05 -05:00
Scott Lahteine	a3dc1e461b	Update M7219 comment, tweak parameter code	2019-07-24 21:09:51 -05:00
Scott Lahteine	1088846cae	Cosmetic updates from 14044	2019-07-24 01:52:36 -05:00
InsanityAutomation	dc6fa04f68	Fix single nozzle temp change, do slower extra prime (#14696)	2019-07-21 19:33:37 -05:00
Tim Moore	e5aa453293	Add support for 2 Neopixel strips (#14667)	2019-07-20 23:14:09 -05:00
Jason Smith	f2c5740d06	Add 'E' argument to G34 to allow stowing between probes (#14533) ... - Use the return value from probe_pt during `G34` Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument. - Add '`E`' argument to `G34` command allowing stowing between each probe.	2019-07-17 04:23:19 -05:00
InsanityAutomation	b8cc61262f	Finish G12, update Nozzle::clean (#14642)	2019-07-17 04:23:19 -05:00
Marcio Teixeira	27c487bab7	Print progress enhancements (#14647)	2019-07-17 03:14:44 -05:00
Scott Lahteine	eaf1c0954e	Update some precompiler tests	2019-07-14 13:09:16 -05:00
InsanityAutomation	ce02c6cee2	Variable tool change purge (#14618)	2019-07-14 11:40:58 -05:00
Marcio Teixeira	cbe4bf2ba8	Fix process_injected_command undefined behavior (#14602)	2019-07-14 10:12:48 -05:00
InsanityAutomation	d2f20803ba	Allow nozzle clean with limited Axis (#14619)	2019-07-14 06:58:53 -05:00
Robby Candra	e96468566d	Fix Z_PROBE_END_SCRIPT in ABL (#14621)	2019-07-14 04:28:38 -05:00
scotthsl	19b24a349c	Fix M412 without HOST_ACTION_COMMANDS (#14591)	2019-07-12 04:23:33 -05:00
Scott Lahteine	ed0e6afacb	Apply LIMIT macro	2019-07-10 03:35:39 -05:00
Bob Kuhn	dc02d0720d	Pins Debugging for STM32 — NEEDS TESTING (#14309)	2019-07-05 22:08:06 -05:00
Scott Lahteine	fe02241044	NONE on combined options	2019-07-05 18:20:24 -05:00
Scott Lahteine	750a16ad38	Fix MIN/MAX function collision with macros	2019-07-05 18:14:02 -05:00
Scott Lahteine	b6546ea33a	Add include guards to some headers	2019-07-05 04:02:08 -05:00
Tim Moore	eb6dec03bd	Simplify power supply naming logic (#14488) ... Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>	2019-07-05 01:58:34 -05:00
Scott Lahteine	720bc7c00b	Named indices for Temperature class (#14479)	2019-07-02 08:39:55 -05:00
GMagician	82ecaa767e	Remove unused code in M100 ... queue.buffer is in bss area, start_free_memory starts from heap then above of bss	2019-07-01 20:38:49 -05:00
Scott Lahteine	d16954dc88	Make KEEPALIVE_STATE a scoped auto-restore (#14446)	2019-06-29 22:49:50 -05:00
Marcio Teixeira	e6cf7860e8	Improve ExtUI, fix compiler errors, warnings (#14441)	2019-06-29 00:23:57 -05:00
Darsey Litzenberger	946f6bdeaa	Disable leveling during G12 (#14385)	2019-06-28 19:23:42 -05:00
Scott Lahteine	4d5a1984e2	Simplified fan handling code	2019-06-28 18:50:32 -05:00
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	2019-06-27 23:58:16 -05:00
Scott Lahteine	d7d80418ae	Singleton for cutting tools (#14429)	2019-06-27 23:06:49 -05:00
Tim Moore	81209f5310	'M105 R' to report redundant temp sensor (#14324)	2019-06-27 21:29:52 -05:00
InsanityAutomation	ce656e2a26	Update G-code injection, sub-commands (#14418)	2019-06-27 15:07:45 -05:00
Scott Lahteine	2580104c8b	Revert recent probe changes ... - Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)" - Revert "Fix G28 with non-BLTouch probes (#14381)" - Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)" - Revert "Apply needed BLTouch patch (#14233)" Co-Authored-By: AnHardt <github@kitelab.de>	2019-06-26 05:33:43 -05:00
BigIronGuru	9f136a7c67	Low-priority homing in G34 (#14391)	2019-06-26 03:52:01 -05:00
Scott Lahteine	49627069a5	Shorthand for home-after-deactivate	2019-06-26 03:47:55 -05:00
Marcio Teixeira	8e23e9b16c	Fix FIX_MOUNTED_PROBE compile error (#14393)	2019-06-25 04:55:29 -05:00
Scott Lahteine	cf762d2c73	Fix enqueueing bug	2019-06-23 23:02:07 -05:00
BigIronGuru	12d21e642f	Update G34 for non-BLTouch probes (#14380)	2019-06-23 20:55:43 -05:00
BigIronGuru	5986194c36	Fix G28 with non-BLTouch probes (#14381)	2019-06-23 20:53:05 -05:00
InsanityAutomation	aa0383a83b	Enhance IDEX toolchange auto-return w/ no park, full control (#14117)	2019-06-23 20:00:48 -05:00
Scott Lahteine	17778d1c2a	Fix M916-918 subcommands	2019-06-22 16:18:42 -05:00
Tanguy Pruvot	be69ec5b32	Fix PLR/M43 warnings (#14333)	2019-06-22 00:48:47 -05:00
BigIronGuru	9c83135d40	Only home Z at the end of G34 (#14353)	2019-06-22 00:43:33 -05:00
LinFor	0f6f5132c1	Fix variable conflict in ok_to_send (#14351)	2019-06-21 19:04:30 -05:00
InsanityAutomation	a9acd2f497	G34 configurable angle limit (#14321)	2019-06-20 21:18:36 -05:00
Scott Lahteine	4df4c47994	Add TMC2209 support (#14249)	2019-06-20 15:47:50 -05:00
Scott Lahteine	4c872a01f2	G-code queue singleton, front injection (#14236)	2019-06-19 00:00:19 -05:00
InsanityAutomation	bf64dd4db6	Improve G34, M422 (Z alignment) (#14142)	2019-06-18 07:02:18 -05:00
Scott Lahteine	3f6424076b	Update M524 description	2019-06-18 05:04:55 -05:00
Scott Lahteine	cf3631226b	Document G-code M290	2019-06-18 04:53:31 -05:00
Scott Lahteine	903863dcb6	Suppress some warnings	2019-06-15 17:47:59 -05:00
mb300sd	bf8bfb5c66	Add Coolant Control M7/M8/M9 (#10745)	2019-06-13 18:43:11 -05:00
Scott Lahteine	bc2ff9b41f	Fix M605 bugs ... Fixes #14191	2019-06-12 20:01:08 -05:00
Scott Lahteine	04715e04ee	Minor M100 cleanup	2019-06-12 06:14:40 -05:00
Scott Lahteine	356410dcfc	Move crc16 function to libs	2019-06-12 06:14:39 -05:00
Scott Lahteine	1ef95013f0	Update Marlin.cpp includes, defines	2019-06-11 07:30:51 -05:00
Tanguy Pruvot	8cf5504a34	Redundant but faster recovery.enabled test (#14175)	2019-06-10 23:33:35 -05:00
Scott Lahteine	0ca2073625	ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT	2019-06-10 17:28:35 -05:00
Robby Candra	5ca8d51e12	Ability to insert G-code in front of queue (#14229)	2019-06-08 05:23:53 -05:00
Ludy	8e8e48f900	Fix links in templates, gcode.h (#14160)	2019-05-28 21:39:55 -05:00
Minims	32afe1d102	Fix TOOLCHANGE_ZRAISE warning (#14156)	2019-05-27 19:51:29 -05:00
Scott Lahteine	3c179bbd47	Simpler G28 home axis conditions	2019-05-26 16:26:55 -05:00
Scott Lahteine	352734494b	Reduce some M43 strings	2019-05-26 16:21:28 -05:00
Scott Lahteine	b14cc0d7c5	Remove extra gcode. prefix	2019-05-26 16:18:45 -05:00
Scott Lahteine	c6d39319de	Fix some whitespace	2019-05-26 16:18:43 -05:00
InsanityAutomation	212860f090	Always change to Tool 0 on G29 (#14146)	2019-05-26 14:53:21 -05:00
Bryan	0ef5d667b6	Fixed M43 parameter bug (#14099)	2019-05-25 18:23:25 -05:00
teemuatlut	1c86fbc60b	TMC updates, capture LCD changes (#14074)	2019-05-25 18:22:12 -05:00
Scott Lahteine	fc52c43a26	Some documentation updates	2019-05-24 16:30:44 -05:00
Tanguy Pruvot	24b1818245	Secure STM32F1 servo code and M280 detach (#14085)	2019-05-22 16:57:19 -05:00
Scott Lahteine	aeec9ef76b	Update backlash code	2019-05-20 21:34:08 -05:00
Tanguy Pruvot	87e7193259	Fix M226 sign warning (for most platforms) (#14049)	2019-05-18 16:15:48 -05:00
FanDjango	85fb33a060	BLTOUCH tweaks, new v3.1 command (#14015)	2019-05-17 19:10:18 -05:00
Scott Lahteine	785c01f2bc	Use US spelling of 'behavior'	2019-05-15 01:49:17 -05:00
Sam Lane	7f1e0c5670	Update EXTRA_LINADV_K with Marlin bit macros (#13993)	2019-05-15 01:07:07 -05:00
Robby Candra	7b78a20fb7	Fix: Debug Memory Dump size (#13957) ... * Fix Memory Dump size * Fix Compile error on Memory Dump	2019-05-11 11:44:39 -05:00
Giuliano Zaro	f22c9a1ae1	Fix G-code parser with MMU2 (#13951)	2019-05-10 19:57:15 -05:00
Bob Kuhn	fa3739aa23	M100: LPC1768 and DUE compatibility (#13962)	2019-05-09 21:57:44 -05:00
Scott Lahteine	ad4ffa1d2f	Use C++ language supported 'nullptr' (#13944)	2019-05-09 11:45:55 -05:00
InsanityAutomation	6811e2921b	BLTouch v3 / 3DTouch Interoperability & performance (#13814)	2019-05-07 21:25:54 -05:00
Ludy	a504366138	Fix probe fan compiling error (#13930)	2019-05-07 14:14:12 -05:00
Stephan	483822f3aa	Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)	2019-05-06 19:55:01 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888)	2019-05-06 18:51:06 -05:00
Ludy	f96eaad1ea	Unused variable cleanup (#13917)	2019-05-05 22:01:04 -05:00
Giuliano Zaro	e2a77ed881	Bring chamber temp to completion (#13837)	2019-05-04 22:51:47 -05:00
Marcio Teixeira	15357af67c	Backlash cleanup (#13659) ... …And save backlash, fil. sensor, ExtUI userdata to EEPROM.	2019-05-03 23:53:15 -05:00
Robby Candra	c369477cb0	Fix bug: diveToFile breaks M23 (#13865)	2019-05-02 15:54:24 -05:00
Thomas Moore	ee243e4edf	Fix mixing extruder filament change (#13803)	2019-05-01 21:55:58 -05:00
InsanityAutomation	610fb46683	Fix some ExtUI issues (#13799)	2019-04-26 09:32:01 +02:00
Bob-the-Kuhn	73726d56b3	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-25 12:06:01 -05:00
Scott Lahteine	5051909c3c	Update do_select_screen for general use (#13800)	2019-04-24 10:13:44 -05:00
Giuliano Zaro	e2dd2268e8	Add a Z raise-between-probes to G34 (#13791)	2019-04-23 13:40:55 -05:00
Scott Lahteine	0c4d3e6622	Improve M906 description	2019-04-22 13:48:02 -05:00
Bob-the-Kuhn	520585c5ed	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-17 15:34:29 -05:00
Scott Lahteine	92ed9a2bb6	Fix is_M29 ... Followup for #13013	2019-04-15 23:47:06 -05:00
Scott Lahteine	9992c424f5	Patch G92.9 flags ... Followup to #13703	2019-04-15 20:26:40 -05:00
Msq001	455ee23499	Fix, improve Power Loss Recovery (#13703) ... - Save and restore workspace offsets - Add retract and purge (hidden) options - Always restore axis relative modes - Use added `G92.9` to do position restores	2019-04-15 18:53:39 -05:00
InsanityAutomation	aa0f7afbe6	Fix call to uninitialized PWM pin, heater 2 overlap (#13674)	2019-04-15 15:57:34 -05:00
Bob-the-Kuhn	9dd4252b39	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-12 22:07:12 -05:00
Scott Lahteine	7e58d33a2e	Update some headers	2019-04-12 13:04:04 -05:00
Jamie	509dc283f2	Restore declarations of G53-G59 (#13654)	2019-04-11 13:51:05 -05:00
InsanityAutomation	4900c28bf6	Fix IDEX tool-change, and more (#13614)	2019-04-09 18:33:40 -05:00
Scott Lahteine	5e38d70697	Fix M217 report label, general cleanup	2019-04-08 18:18:08 -05:00
Scott Lahteine	fae2b7edc3	Update MMU2 code style	2019-04-08 18:13:42 -05:00
Scott Lahteine	c8a83fb122	SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA	2019-04-08 18:13:41 -05:00
Bob Kuhn	9a56d90150	Fix M43 on LPC176x (#13587) ... The real fix. PR #13568 was wrong.	2019-04-06 18:06:07 -05:00
Roxy-3D	9cee81d47e	Option to show babysteps total since G28 (#13580)	2019-04-06 18:04:34 -05:00
Scott Lahteine	cf12fc8366	Expand on serial debugging (#13577)	2019-04-05 20:02:46 -05:00
Marcio Teixeira	bf7b28b456	Fix incorrect variable name (#13585)	2019-04-05 19:04:46 -05:00
Scott Lahteine	cacec5764a	Clean up whitespace	2019-04-04 22:12:02 -05:00
Marcio Teixeira	27a4927ed1	Add option to move away from endstop after homing. (#13557) ... Add option to move away from endstop after homing. - Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6). - Also prevents chattering when sensorless homing with axes against bumpers.	2019-04-04 02:47:19 -05:00
Scott Lahteine	af92ee9dd6	No PLR include needed in queue.cpp	2019-04-03 18:26:31 -05:00
Scott Lahteine	2aa35e95af	More G26 arc cleanup ... Followup to #13531	2019-04-03 16:03:21 -05:00
Scott Lahteine	a0a5c31c05	Power-Loss initialization fix (#13553) ... - Only save to PLR file on moves with E and X or Y - Save to PLR after any long-ish Z downward move	2019-04-01 17:52:45 -05:00
InsanityAutomation	fbc7b51a24	Use NO_FETCH for Dual X G28 (#13539)	2019-04-01 17:48:21 -05:00
InsanityAutomation	4961d8aa3e	Update G28.cpp (#13539)	2019-03-31 19:50:40 -05:00
ManuelMcLure	04086fc455	Minor optimization to ARC_SUPPORT code (#13531)	2019-03-30 22:29:37 -05:00
Robby Candra	a3f67acd6d	Fix Power Loss Recovery file delete (#13522)	2019-03-30 13:14:58 -05:00
Marcio Teixeira	5679fae11e	UltraLCD enhancements (lower fan resolution, backlash menu) (#13519)	2019-03-29 14:07:43 -05:00
Marcio Teixeira	c6466c23fe	Silence signed/unsigned comparison warning. (#13508)	2019-03-29 13:33:45 -05:00
InsanityAutomation	7240e3a68f	Allow G26 with no heated bed (#13511)	2019-03-29 13:32:43 -05:00
Sam Lane	e3ab54753b	Add extra Linear Advance factors (#13490)	2019-03-26 04:02:27 -05:00
Thomas Moore	263f8edff8	Disable volumetric extrusion during G26 (#13479)	2019-03-25 22:41:52 -05:00
Chris Pepper	aacc1148b0	Fix M106 for index > extruders (#13473)	2019-03-24 20:03:53 -05:00
7eggert	d96f7d6068	Minimum segments for G2/G3. Better for small arcs. (#13466)	2019-03-24 19:53:47 -05:00
Sam Lane	a8fa275dc6	Fix Fan 0 responding to all fan speeds (#13444)	2019-03-23 23:00:31 -05:00
InsanityAutomation	5b2c37d6c1	Followup to BLTouch (#13422)	2019-03-18 16:31:11 -05:00
InsanityAutomation	3fb8489ae3	EXTUI and UBL compilation fixes (#13420)	2019-03-17 07:57:54 -05:00
Scott Lahteine	b376c7e374	Group DISABLED items	2019-03-17 07:56:35 -05:00
InsanityAutomation	691e5c3bb8	BLTouch V3.0 support (#13406)	2019-03-17 05:57:25 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419) ... Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
InsanityAutomation	09eb30dc05	IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404)	2019-03-15 22:46:27 -05:00
Scott Lahteine	9a515cbd32	Fix Pause Print message and behavior (#13394)	2019-03-14 02:26:07 -05:00
Scott Lahteine	f5bcc00570	Unify debugging output with debug_out.h (#13388)	2019-03-14 02:25:42 -05:00
Andrei Pozolotin	cc8a871705	Add capability string CHAMBER_TEMPERATURE (#13391) ... Reference: #13380	2019-03-13 18:09:22 -05:00
Scott Lahteine	67bee06e43	No patch needed for non-libmaple analogWrite ... See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743	2019-03-13 07:21:10 -05:00
Scott Lahteine	f89b375fb9	Fixes and improvements for PWM pins (#13383)	2019-03-13 06:51:15 -05:00
Scott Lahteine	87162658c4	Fix and improve software endstops (#13386)	2019-03-13 05:48:36 -05:00
InsanityAutomation	c03df89921	ExtUI Mesh Leveling Extensions (#13363)	2019-03-13 00:45:52 -05:00
InsanityAutomation	050eac03af	Single X Duplication Extension (#13373) ... * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)	2019-03-13 00:42:50 -05:00
Scott Lahteine	d63da4592d	Tweak to SCARA_move_to_cal	2019-03-12 22:06:50 -05:00
Scott Lahteine	d94e077901	Apply HAS_HOTEND_OFFSET where needed	2019-03-11 20:58:27 -05:00
Scott Lahteine	e52bcc9408	Limit top bed temp to BED_MAXTEMP - 10 ... The chances of a 10° overshoot is pretty minimal.	2019-03-11 16:32:34 -05:00
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	2019-03-10 17:22:09 -05:00
Tobias Frost	60e82e3929	Send notifications to ExtUI for M0/M1 (#13344) ... - Send notifications to ExtUI for M0/M1 - wait_for_user can be non-volatile (not changed by interrupt) C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.	2019-03-09 14:20:37 -06:00
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334) ... - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	2019-03-09 14:20:37 -06:00
InsanityAutomation	d54741eda8	Update some G26 plausible values. Add speed control. (#13330)	2019-03-08 03:13:44 -06:00
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	2019-03-07 02:09:39 -06:00
Scott Lahteine	cfdb38eda4	Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)	2019-03-05 06:46:19 -06:00
Scott Lahteine	2e5a3b01fd	Save Power Loss Recovery only on move commands	2019-03-05 02:43:29 -06:00
Scott Lahteine	2212da453a	Distinguish between analog/digital auto fans (#13298)	2019-03-05 00:41:31 -06:00
Chris Pepper	2513f6b550	Fix multiport G28 with Binary Transfer (#13308)	2019-03-04 16:44:54 +00:00
Scott Lahteine	35ae5daf2d	Split up sdcard G-codes	2019-03-03 01:52:15 -06:00
Scott Lahteine	3f36a38512	Clean up some pre-serial-redirect includes	2019-03-03 01:52:15 -06:00
Scott Lahteine	edc4e037c4	Add a note to G10	2019-03-02 17:19:36 -06:00
Chris Pepper	b0553d2d97	Add M997 support and simple implementation for LPC176x (#13281)	2019-03-01 20:11:50 -06:00
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	2019-03-01 01:51:24 -06:00
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276)	2019-03-01 00:27:45 -06:00
Chris Pepper	7de6476b3d	Fix binary protocol error	2019-02-28 02:31:42 +00:00
Scott Lahteine	2c10222e87	card.transfer_port => transfer_port_index	2019-02-27 20:14:17 -06:00
Chris Pepper	4ab433d391	Fix binary protocol with one serial port (#13270) ... - The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number. - Added packet number to "ok" response so hosts don't need to wait for the ACK. - Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.	2019-02-27 19:57:48 -06:00
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116)	2019-02-26 21:03:13 -06:00
Scott Lahteine	5d28575d4d	Clean up some motion code	2019-02-25 16:01:42 -06:00
Scott Lahteine	808b076000	Update some ABL/UBL conditionals	2019-02-25 16:01:42 -06:00
Scott Lahteine	64253e1a58	Followup to serial reform ... Reference #13250	2019-02-25 00:20:36 -06:00
Minims	92a4984066	Fix G34 probe position (#13251)	2019-02-24 13:57:30 -06:00
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234)	2019-02-23 22:53:01 -06:00
Bruce j Beare	562f2321d2	Fix a G34 bug, allow negative Z corrections (#13240)	2019-02-23 02:41:52 -06:00
Marcio Teixeira	109e67169c	Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) ... Ticket #13228 If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.	2019-02-22 15:35:32 -06:00
Scott Lahteine	80359c9937	Add more parameters to M240 ... Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>	2019-02-20 14:51:36 -06:00
Scott Lahteine	89bbc30a09	Fix init of power supply pin ... Fix #13184	2019-02-20 05:29:05 -06:00
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135)	2019-02-20 02:22:42 -06:00
Scott Lahteine	3a1b6fe8c1	Coding standards	2019-02-19 14:58:39 -06:00
InsanityAutomation	19af90face	Fix a host action compile error (#13208)	2019-02-19 14:47:31 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Marcio Teixeira	31c240a8db	Enhancements to G425 (#13159) ... - Turn off bed leveling prior to calibrating. - This prevents lateral probes from having a Z component that triggers the Z endstop and causes the motion to be aborted. - Got rid of static const float arrays "dimension" and "true_center" - Frees up 24 bytes of SRAM - Changed incorrect use of "bool" for float in backlash macros. - Replaced arguments with 0.0f and 1.0f for clarity. - Now only disables soft endstops (since calibration cube is outside of bed) - Not necessary to disable global endstops	2019-02-14 16:45:31 -06:00
Scott Lahteine	ab2816c870	Patch for M240	2019-02-14 15:13:57 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168)	2019-02-14 15:09:35 -06:00
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	2019-02-14 05:25:46 -06:00
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	2019-02-14 02:22:08 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
revilor	e56c13670d	Service interval watchdog (#13105)	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	894f5c24a8	Fix trailing whitespace	2019-02-12 14:25:57 -06:00
Roman Moravčík	bace52afd7	Fixed compilation with MMU2_MENUS disabled (#13140)	2019-02-12 12:55:49 -06:00
Scott Lahteine	9737608f0a	Enable gradient when alias is cleared	2019-02-10 06:39:12 -06:00
Scott Lahteine	6de3d34378	M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022)	2019-02-10 04:54:23 -06:00
AnHardt	0e37fe8776	Apply minimum C in M303 (#13113) ... Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104	2019-02-10 03:54:45 -06:00
Scott Lahteine	f269766408	Put the MMU2 menu with the others	2019-02-06 17:38:46 -06:00
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050)	2019-02-06 17:20:17 -06:00
Mark Zachmann	19cf72e057	Support individual solenoid disable with M381 (#13008)	2019-02-06 06:34:53 -06:00
teemuatlut	d81342254a	Support new TMC drivers (#13026)	2019-02-06 06:33:14 -06:00
Rolf Werum	524c6c10bf	MAGNETIC_PARKING_EXTRUDER (#12351)	2019-02-06 06:30:53 -06:00
Scott Lahteine	1bd9a63049	Add HAS_EXTRA_ENDSTOPS macro	2019-02-06 05:10:05 -06:00
Scott Lahteine	1497fb388a	M29 match logic was reversed (#13013) ... * M29 logic was reversed If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?" * Update queue.cpp * Update queue.cpp	2019-02-04 07:23:42 -06:00
Scott Lahteine	b5fd2fb58b	Allow M29 to be processed late	2019-02-04 07:23:02 -06:00
Scott Lahteine	c03bac9ad4	Update queue.cpp	2019-02-04 07:17:40 -06:00
Scott Lahteine	a49f0205ea	Update queue.cpp	2019-02-04 07:11:08 -06:00
jeffstaley	2f176d6fb8	Flush RX buffer on G-code line errors to prevent hang (#13018)	2019-02-04 06:03:49 -06:00
Scott Lahteine	4200bd2fc1	Report on M92 with no arguments (#12833)	2019-02-04 05:24:15 -06:00
Scott Lahteine	433518de74	Prevent M420 error from disconnecting OctoPrint ... Just echo the error instead of labeling it `Error:`.	2019-02-04 01:54:43 -06:00
Scott Lahteine	4fa1c52688	Tweak serial output code	2019-02-03 01:09:14 -06:00
Scott Lahteine	a5e3384691	Pre-apply cosmetic changes to mixing	2019-02-03 01:09:14 -06:00
mattfredwill	c3cb449990	TMC2130 dual-stepper Sensorless Homing (#13061)	2019-02-01 18:09:01 -06:00
revilor	6a57d0b381	Prusa MMU2 (#12967)	2019-01-31 19:10:52 -06:00
InsanityAutomation	a1d03fe7ba	Fix single nozzle fan (#13038)	2019-01-30 20:54:04 -06:00
Scott Lahteine	97da6c1da5	Use MIN/MAX for min/max	2019-01-28 20:36:13 -06:00
Giuliano Zaro	a79d80c78e	Minor cleanup of pause code (#13030)	2019-01-27 23:10:25 -06:00
InsanityAutomation	48a3502656	Remote streamer improvements (#12982)	2019-01-27 22:43:13 -06:00
jeffstaley	3f91233f6d	M29 logic was reversed ... If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"	2019-01-25 07:36:52 -08:00
jeffstaley	0e0cc13650	Fix M29 for Pronterface SD card upload (#13010)	2019-01-24 21:10:59 -06:00
Scott Lahteine	8f9b246d0e	Tweak some formatting, replace tabs	2019-01-24 13:18:56 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895)	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
InsanityAutomation	a1cf49935d	Add laser control menu (#12883)	2019-01-20 23:41:47 -06:00
InsanityAutomation	75f2665f2e	LCD SD Card items near top when not using wheel (#12926)	2019-01-20 23:24:53 -06:00
Scott Lahteine	0495fcd475	Minor spacing fix	2019-01-20 00:10:50 -06:00
Ludy	acf266fe78	Fix a compile warning, etc. (#12955)	2019-01-19 18:47:29 -06:00
Scott Lahteine	ce563d7c2e	Various general cleanups ... Mostly from the L6470-oriented PR	2019-01-19 16:56:12 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884)	2019-01-17 13:17:16 -06:00
Marcio Teixeira	f11c6d5d02	Fix M107 when dual-nozzles share fan (#12819) (#12909)	2019-01-15 18:45:18 -06:00
InsanityAutomation	59b18aaeef	Allow resume from pause with parking enabled (#12893) ... Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people. I understand more work needs to be done to resolve some of the concerns...	2019-01-15 07:58:54 -07:00
Giuliano Zaro	85f149befe	Save some progmem (#12913)	2019-01-14 20:56:30 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
Scott Lahteine	7cfce20cd3	Update comments on M125	2019-01-12 17:52:44 -06:00
InsanityAutomation	ed3ab5e212	Fix M24 not starting new job (#12887)	2019-01-12 15:30:44 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)	2019-01-12 00:41:48 -06:00
InsanityAutomation	a403d9a50c	Improve menu pause / resume (#12876)	2019-01-11 20:42:11 -06:00
Scott Lahteine	fb8111553e	getStatus => report_status	2019-01-11 19:51:00 -06:00
Giuliano Zaro	709a6356f7	Remove obsolete test conditions (#12829)	2019-01-05 14:02:45 -06:00
Luu Lac	bcf347403b	Fix M106 extruder & fan count (#12820)	2019-01-05 14:01:35 -06:00
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799)	2019-01-03 08:36:43 -06:00
Ludy	14a7faf087	Fix compile warning comparison uint and int (#12788)	2019-01-01 18:20:12 -06:00
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747) ... * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	2019-01-01 15:17:48 -06:00
InsanityAutomation	4f2473053c	Fix M106 with SINGLENOZZLE	2018-12-31 20:10:18 -06:00
Ludy	814d93c7cf	Fix G33 sprintf output warning (#12738)	2018-12-27 18:05:42 -06:00
InsanityAutomation	530ef5846f	Make nomove=false for toolchange on filament swap (#12739)	2018-12-27 11:38:35 -06:00
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648) ... Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	2018-12-18 12:43:38 -06:00
Marcio Teixeira	902d5b0f8b	Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628)	2018-12-12 17:21:37 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616)	2018-12-09 20:54:48 -06:00
MasterPIC	3bb8b3529a	Center ABL grid on bed with H parameter. (#12610)	2018-12-09 11:24:48 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061)	2018-12-08 14:36:46 -06:00
Scott Lahteine	b7e38ea249	Signal an invalid mesh for M420 enable / load	2018-12-07 16:14:11 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)	2018-12-07 15:34:21 -06:00
Scott Lahteine	261c6f4b96	Fix pause/resume SD print ... Followup to #12551, addressing #12566	2018-11-30 19:23:08 -06:00
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559)	2018-11-30 12:31:42 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557)	2018-11-29 16:58:58 -06:00
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551)	2018-11-28 19:28:31 -06:00
Scott Lahteine	5b24ce9024	Hide M217 compile warning	2018-11-26 16:52:16 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	d29cb09b3e	Fix a minor compile warning	2018-11-22 05:35:38 -06:00
Scott Lahteine	817a37169a	Apply/unapply const here and there	2018-11-20 06:44:21 -06:00
Scott Lahteine	a4c15dc54f	Modify MBL to use IJ instead of XY (#12478)	2018-11-19 09:08:15 -06:00
kAdonis	4ae9a06c60	Update M303.cpp (#12471)	2018-11-18 18:04:51 -06:00
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439)	2018-11-17 22:21:44 -06:00
Giuliano Zaro	43ecdb606f	Fix a compile warning (#12452)	2018-11-17 07:08:25 -06:00
Ludy	56a94c2a26	Use 'target_extruder' in M104 as with M109 (#12448)	2018-11-17 06:55:25 -06:00
Scott Lahteine	66580f32c2	Make CardReader class static (#12451) ... * Make CardReader a static class * Make CardReader flags into bitfields	2018-11-16 22:39:16 -06:00
Scott Lahteine	d97e31db4c	Optimize Power-Loss Recovery (#12440)	2018-11-16 20:47:07 -06:00
Scott Lahteine	0e610815e4	No need for Cap:PAREN_COMMENTS	2018-11-16 04:28:40 -06:00
Scott Lahteine	7a075a5dc9	Tweak extruder errors	2018-11-16 01:32:21 -06:00
Scott Lahteine	2d92f333f5	Fix GcodeSuite::T active_extruder reference	2018-11-15 14:07:24 -06:00
Scott Lahteine	d2bb53702a	Optimize target_extruder, ignore T with mixing (#12432) ... * Optimize target_extruder, ignore T with mixing * Give G-code Tn parity with tool_change	2018-11-14 17:33:04 -06:00
Scott Lahteine	d82c350de7	Miscellaneous LCD code renaming, reordering (#12430) ... * Move special characters to language.h * Apply some naming standards * Clean up menu item draw functions * Rename some Temperature methods * UI => ExtUI	2018-11-14 13:13:51 -06:00
Scott Lahteine	54ec5528a0	hasstatus => has_status	2018-11-14 01:34:28 -06:00
Roxy-3D	cda5ef08fa	Debug of G2-G3 for UBL (#12386) ... Changes only affect UBL. Everything else is left alone.	2018-11-13 11:20:21 -06:00
Scott Lahteine	143b2896e0	Add M412 to enable/disable filament runout detection (#12406)	2018-11-12 21:29:46 -06:00
Scott Lahteine	a163c89c6a	Followup to 50af1d1	2018-11-12 20:31:53 -06:00
Scott Lahteine	50af1d1e08	Differentiate translated On/Off from Serial ON/OFF	2018-11-12 17:23:08 -06:00
Scott Lahteine	da17f8ad37	For now (!) don't synchronize in M204 and M205 ... See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.	2018-11-12 02:43:24 -06:00
Scott Lahteine	a0c795b097	Encapsulate common display code in a singleton (#12395) ... * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.	2018-11-11 12:16:24 -06:00
Scott Lahteine	471f403a67	Reduce code size with plain inlines	2018-11-11 08:36:10 -06:00
Scott Lahteine	6093df11dc	Allow G26 to use the active extruder (#12387) ... * Make lcd_quick_feedback argument optional * Add click_to_cancel option to wait_for_hotend/bed * Have G26 use the active nozzle and wait_for_hotend/bed * Use wait_for_release in UBL G29 * Add 'T' parameter to G26 for an initial tool-change	2018-11-10 18:07:38 -06:00
Scott Lahteine	bed15fcd81	Tweak 'echo_not_entered' used by MBL's G29	2018-11-10 01:32:51 -06:00
Scott Lahteine	78ccedd6a8	Fix M91x sanity-check to permit TMC2660 ... Fix #12362	2018-11-09 05:48:15 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365)	2018-11-09 05:25:08 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137)	2018-11-06 22:22:20 -06:00
Scott Lahteine	812f6a7dd7	Fix Resume from SD Pause ... In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690	2018-11-06 21:09:37 -06:00
Scott Lahteine	488a17b3f5	Use IS_SD_PRINTING() more	2018-11-06 20:55:17 -06:00
Marcio Teixeira	4dbaa6369f	Fix const pointer assignment compile error (#12350)	2018-11-06 19:49:39 -06:00
Scott Lahteine	e574f01568	More advanced pause tweaks (#12356) ... * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode	2018-11-06 19:25:57 -06:00
Scott Lahteine	4c5ca89d8c	Show the appropriate pause message (#12348)	2018-11-06 04:13:48 -06:00
Scott Lahteine	b3b4e6dc45	Change Marlin debug flag names to fix conflicts (#12340) ... In reference to #11000	2018-11-05 22:48:28 -06:00
Scott Lahteine	04f173790f	Remove trailing whitespace	2018-11-05 22:38:20 -06:00
Scott Lahteine	486f2a66a9	Fix MBL XY parameter error messages ... Fix #11522	2018-11-05 04:17:37 -06:00
Scott Lahteine	2613ddf61c	Fix "circle"	2018-11-05 04:17:37 -06:00
Scott Lahteine	427bc64ba1	G28 O respects HOME_AFTER_DEACTIVATE ... Addressing #11271	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	3cbc3ecdd7	Fix 'M43 T' to use 'L' as last pin ... - The documentation is correct. The code was wrong.	2018-11-05 04:17:37 -06:00
Scott Lahteine	07a0822ebe	M420 support in MARLIN_DEV_MODE	2018-11-04 20:54:38 -06:00
Scott Lahteine	44fa7fb18c	Cleanups for leveling-related code	2018-11-04 19:07:47 -06:00
Scott Lahteine	cc2bc67440	ENABLED(NEWPANEL) => HAS_LCD_MENU	2018-11-04 19:06:10 -06:00
Scott Lahteine	f5eab912ed	Apply #pragma once, misc cleanup (#12322) ... * Apply #pragma once in headers * Adjust some thermistors formatting * Misc cleanup and formatting	2018-11-04 02:25:55 -06:00
Scott Lahteine	d1ff22b983	Revive SCARA's home offset (unimplemented)	2018-11-03 06:24:41 -05:00
Scott Lahteine	e4cf175163	Synchronize on M204, M205 (#12302) ... * Add parser.seen for multiple parameters * Fix M666, use !seen for report * Synchronize on M204, M205	2018-11-03 01:16:37 -05:00
Ludy	5ba6607181	Fix keypad-related compile error (#12306)	2018-11-02 22:29:32 -05:00
Scott Lahteine	3eb9838dca	Simplify TMC sanity-checks	2018-11-02 01:15:49 -05:00
Scott Lahteine	31c28d0dd2	Drop pgm_read_*_near and let headers choose (#12301) ... - Drop `pgm_read_*_near` and let headers choose. - Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional. - Add `process_subcommands_now` for SRAM-based commands.	2018-11-02 00:42:16 -05:00
Ludy	9f77df2590	Followup to menu refactor. TMC warnings, sanity. (#12288) ... - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings	2018-11-01 16:13:33 -05:00
Scott Lahteine	42f8b6c530	Make M125 work with SDSUPPORT (#12289)	2018-11-01 15:03:45 -05:00
Scott Lahteine	44f2a82a56	Move axis_homed, axis_known_position to motion.*	2018-10-31 17:44:42 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249)	2018-10-30 19:44:12 -05:00
Scott Lahteine	3583e2b449	Followup to Menu Refactor (#12275)	2018-10-30 16:34:45 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302)	2018-10-29 14:01:36 -05:00
Scott Lahteine	2bf18950ab	Refactor LCD menus	2018-10-28 15:46:45 -05:00
MasterPIC	6fbc87301f	'G29 H' to set a centered square probe area (linear, bilinear) (#12242)	2018-10-27 20:30:21 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172)	2018-10-25 10:35:16 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194)	2018-10-23 15:38:17 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
TheSFReader	1fb9b299d4	Add M524 to abort SD printing (#12155)	2018-10-19 14:25:07 -05:00
Scott Lahteine	c6a5c74208	Add parentheses to SD macros	2018-10-19 13:52:57 -05:00
Marcio Teixeira	71e19baf69	Fix kill => disable_all_heaters => print_job_timer.stop (#12146) ... - Remove `print_job_timer.stop()` from `disable_all_heaters` - Call `print_job_timer.stop()` for relevant `disable_all_heaters()`. - Split up `kill()` for watchdog interrupt safety	2018-10-18 21:20:56 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090) ... * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Marcio Teixeira	f98f4ac7ea	Fix and improve EXTENSIBLE_UI (#12117) ... - Add methods to access print counter data - Clean up some inconsistent method names - Clear lcd status after filament change - Implement `lcd_reset_status` so it works like UltraLCD	2018-10-16 16:58:29 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Scott Lahteine	bf0c809ff2	Update M165 comment	2018-10-16 06:10:27 -05:00
AnHardt	9ac9649183	Mixer - update descriptions (#12108)	2018-10-16 06:09:02 -05:00
AnHardt	f56968ba0b	New Continuous Filament Mixer (#12098)	2018-10-16 03:38:57 -05:00
Scott Lahteine	84b59d58fb	Clean up whitespace	2018-10-16 02:02:20 -05:00
TheSFReader	af939c158a	Option for G0 to have a separate feedrate (#12089)	2018-10-16 01:49:51 -05:00
Scott Lahteine	951b25163e	Extend M217 with configurable park/raise (#12076)	2018-10-13 23:08:20 -05:00
Scott Lahteine	45e738876a	Add stepper MS3 support ... Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	2018-10-11 01:10:11 -05:00
Giuliano Zaro	d43d4e4219	Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) ... Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>	2018-10-10 21:25:43 -05:00
Scott Lahteine	d556dc1865	Fix and improve EEPROM storage (#12054) ... * Clean up Temperature PID * Improve EEPROM read/write/validate * Group `SINGLENOZZLE` saved settings * Group planner saved settings * Group filament change saved settings * Group skew saved settings * Group `FWRETRACT` saved settings	2018-10-10 09:45:20 -05:00
Scott Lahteine	07d33849b0	Fix unused var warning, apply ENABLED	2018-10-09 21:31:28 -05:00
Scott Lahteine	ce82015d5f	Fix include in G80	2018-10-09 17:24:56 -05:00
Scott Lahteine	5f6aabccbe	Tweak M48 spacing	2018-10-08 19:11:25 -05:00
Marcio Teixeira	906a24fa81	Extensible user interface API (#11193)	2018-10-08 15:44:05 -05:00
InsanityAutomation	ee253991d4	Various fixups for single-nozzle filament swap (#12036)	2018-10-08 15:39:55 -05:00
Scott Lahteine	55e810d512	Fix G80 compilation	2018-10-08 13:11:36 -05:00
Scott Lahteine	7db0113b53	Improve E_AXIS_N macro	2018-10-07 18:22:05 -05:00
Sam Lane	f2ecf8d510	Add option to control Solenoids under PARKING_EXTRUDER (#12028)	2018-10-07 17:07:12 -05:00
InsanityAutomation	74cd6cb4fc	Single nozzle filament change (#11994)	2018-10-07 17:06:14 -05:00
Scott Lahteine	d6b0fbd771	Use uint8_t for all fan speeds (#12032)	2018-10-07 15:34:41 -05:00
teemuatlut	c447d75916	Add support for TMC2660 (#11998)	2018-10-06 17:18:10 -05:00
Scott Lahteine	52a37913c1	Extend and apply some corrections	2018-10-06 00:27:21 -05:00
thesfreader	e09c144674	Add CNC-like G-code options	2018-10-06 00:15:27 -05:00
Scott Lahteine	3e58b3a5d4	Followup to #11943	2018-10-03 02:55:10 -05:00
teemuatlut	c3229e1b34	Migrate to a new TMC library (#11943)	2018-10-03 02:48:49 -05:00
Eduardo José Tagle	d6955f25b2	Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988)	2018-10-03 00:47:27 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977)	2018-09-30 23:44:33 -05:00
AnoNymous	b30ca652ae	Replace MIN# / MAX# with variadic MIN / MAX (#11960)	2018-09-30 04:59:14 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951) ... Fix compile error intruduced with M109 modification	2018-09-29 13:48:23 -05:00
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	2018-09-29 02:12:06 -05:00
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949)	2018-09-29 01:44:47 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904)	2018-09-28 16:52:56 -05:00
Scott Lahteine	cb6454118c	Workaround for Pronterface M29	2018-09-27 16:27:02 -05:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916)	2018-09-24 21:46:56 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862) ... * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889)	2018-09-23 12:00:34 -04:00
Scott Lahteine	e4ee607fc8	Fix Dual X FRS in M600 ... Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>	2018-09-18 21:23:33 -05:00
Scott Lahteine	bae8f82ba8	[2.0] Fix Mixing Extruder mixing factors (#11861)	2018-09-18 01:10:41 -05:00
Scott Lahteine	c5e5cc5e9f	Fix some trailing whitespace, macros	2018-09-17 17:30:04 -05:00
Roxy-3D	0780913848	IDEX Improvements (#11848)	2018-09-17 01:06:22 -05:00
Scott Lahteine	53bd0b55cb	Followup for 6 extruders	2018-09-16 23:57:50 -05:00
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
Thomas Moore	c437bb08f1	Overhaul of the planner (#11578) ... - Move FWRETRACT to the planner - Combine leveling, skew, etc. in a single modifier method - Have kinematic and non-kinematic moves call one planner method	2018-09-16 21:24:15 -05:00
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
Sam Lane	4f883d5971	[2.0.x] Extruder-Distinct Linear Advance K Factors (#11789)	2018-09-10 22:37:32 -05:00
Sam Lane	1b6bc19427	Add external closed loop controller support	2018-09-10 03:17:17 -05:00