Enhancements to G425 (#13159)
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
This commit is contained in:
Marcio Teixeira
Scott Lahteine
parent
84fc400aba
commit
31c240a8db
@ -30,6 +30,8 @@
|
||||
#include "../../module/planner.h"
|
||||
#include "../../module/tool_change.h"
|
||||
#include "../../module/endstops.h"
|
||||
#include "../../feature/bedlevel/bedlevel.h"
|
||||
|
||||
|
||||
/**
|
||||
* G425 backs away from the calibration object by various distances
|
||||
@ -60,8 +62,9 @@
|
||||
enum side_t : uint8_t { TOP, RIGHT, FRONT, LEFT, BACK, NUM_SIDES };
|
||||
|
||||
struct measurements_t {
|
||||
static const float dimensions[XYZ];
|
||||
static const float true_center[XYZ]; // This cannot be constexpr since it is accessed by index in probe_side
|
||||
static constexpr float dimensions[XYZ] = CALIBRATION_OBJECT_DIMENSIONS;
|
||||
static constexpr float true_center[XYZ] = CALIBRATION_OBJECT_CENTER;
|
||||
|
||||
float obj_center[XYZ] = CALIBRATION_OBJECT_CENTER;
|
||||
float obj_side[NUM_SIDES];
|
||||
|
||||
@ -71,16 +74,13 @@ struct measurements_t {
|
||||
float nozzle_outer_dimension[2] = {CALIBRATION_NOZZLE_OUTER_DIAMETER, CALIBRATION_NOZZLE_OUTER_DIAMETER};
|
||||
};
|
||||
|
||||
const float measurements_t::true_center[XYZ] = CALIBRATION_OBJECT_CENTER;
|
||||
|
||||
const float measurements_t::dimensions[] = CALIBRATION_OBJECT_DIMENSIONS;
|
||||
|
||||
#define TEMPORARY_ENDSTOP_STATE(enable) REMEMBER(tes, soft_endstops_enabled, enable); TemporaryGlobalEndstopsState tges(enable)
|
||||
#define TEMPORARY_BED_LEVELING_STATE(enable) TemporaryBedLevelingState tbls(enable)
|
||||
#define TEMPORARY_SOFT_ENDSTOP_STATE(enable) REMEMBER(tes, soft_endstops_enabled, enable);
|
||||
|
||||
#if ENABLED(BACKLASH_GCODE)
|
||||
#define TEMPORARY_BACKLASH_STATE(enable) REMEMBER(tbst, backlash_correction, enable)
|
||||
#define TEMPORARY_BACKLASH_CORRECTION(value) REMEMBER(tbst, backlash_correction, value)
|
||||
#else
|
||||
#define TEMPORARY_BACKLASH_STATE(enable)
|
||||
#define TEMPORARY_BACKLASH_CORRECTION(value)
|
||||
#endif
|
||||
|
||||
#if ENABLED(BACKLASH_GCODE) && defined(BACKLASH_SMOOTHING_MM)
|
||||
@ -89,6 +89,20 @@ const float measurements_t::dimensions[] = CALIBRATION_OBJECT_DIMENSIONS;
|
||||
#define TEMPORARY_BACKLASH_SMOOTHING(value)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* A class to save and change the bed leveling state,
|
||||
* then restore it when it goes out of scope.
|
||||
*/
|
||||
class TemporaryBedLevelingState {
|
||||
bool saved;
|
||||
|
||||
public:
|
||||
TemporaryBedLevelingState(const bool enable) : saved(planner.leveling_active) {
|
||||
set_bed_leveling_enabled(enable);
|
||||
}
|
||||
~TemporaryBedLevelingState() { set_bed_leveling_enabled(saved); }
|
||||
};
|
||||
|
||||
/**
|
||||
* Move to a particular location. Up to three individual axes
|
||||
* and their destinations can be specified, in any order.
|
||||
@ -121,10 +135,10 @@ inline void move_to(
|
||||
* uncertainty in - How far away from the object top to park
|
||||
*/
|
||||
inline void park_above_object(measurements_t &m, const float uncertainty) {
|
||||
/* Move to safe distance above calibration object */
|
||||
// Move to safe distance above calibration object
|
||||
move_to(Z_AXIS, m.obj_center[Z_AXIS] + m.dimensions[Z_AXIS] / 2 + uncertainty);
|
||||
|
||||
/* Move to center of calibration object in XY */
|
||||
// Move to center of calibration object in XY
|
||||
move_to(X_AXIS, m.obj_center[X_AXIS], Y_AXIS, m.obj_center[Y_AXIS]);
|
||||
}
|
||||
|
||||
@ -228,6 +242,7 @@ inline float measure(const AxisEnum axis, const int dir, const bool stop_state,
|
||||
* to find out height of edge
|
||||
*/
|
||||
inline void probe_side(measurements_t &m, const float uncertainty, const side_t side, const bool probe_top_at_edge=false) {
|
||||
const float dimensions[] = CALIBRATION_OBJECT_DIMENSIONS;
|
||||
AxisEnum axis;
|
||||
float dir;
|
||||
|
||||
@ -236,7 +251,7 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
|
||||
switch(side) {
|
||||
case TOP: {
|
||||
const float measurement = measure(Z_AXIS, -1, true, &m.backlash[TOP], uncertainty);
|
||||
m.obj_center[Z_AXIS] = measurement - m.dimensions[Z_AXIS] / 2;
|
||||
m.obj_center[Z_AXIS] = measurement - dimensions[Z_AXIS] / 2;
|
||||
m.obj_side[TOP] = measurement;
|
||||
return;
|
||||
}
|
||||
@ -250,18 +265,18 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
|
||||
|
||||
if (probe_top_at_edge) {
|
||||
// Probe top nearest the side we are probing
|
||||
move_to(axis, m.obj_center[axis] + (-dir) * (m.dimensions[axis] / 2 - m.nozzle_outer_dimension[axis]));
|
||||
move_to(axis, m.obj_center[axis] + (-dir) * (dimensions[axis] / 2 - m.nozzle_outer_dimension[axis]));
|
||||
m.obj_side[TOP] = measure(Z_AXIS, -1, true, &m.backlash[TOP], uncertainty);
|
||||
m.obj_center[Z_AXIS] = m.obj_side[TOP] - m.dimensions[Z_AXIS] / 2;
|
||||
m.obj_center[Z_AXIS] = m.obj_side[TOP] - dimensions[Z_AXIS] / 2;
|
||||
}
|
||||
|
||||
// Move to safe distance to the side of the calibration object
|
||||
move_to(axis, m.obj_center[axis] + (-dir) * (m.dimensions[axis] / 2 + m.nozzle_outer_dimension[axis] / 2 + uncertainty));
|
||||
move_to(axis, m.obj_center[axis] + (-dir) * (dimensions[axis] / 2 + m.nozzle_outer_dimension[axis] / 2 + uncertainty));
|
||||
|
||||
// Plunge below the side of the calibration object and measure
|
||||
move_to(Z_AXIS, m.obj_side[TOP] - CALIBRATION_NOZZLE_TIP_HEIGHT * 0.7);
|
||||
const float measurement = measure(axis, dir, true, &m.backlash[side], uncertainty);
|
||||
m.obj_center[axis] = measurement + dir * (m.dimensions[axis] / 2 + m.nozzle_outer_dimension[axis] / 2);
|
||||
m.obj_center[axis] = measurement + dir * (dimensions[axis] / 2 + m.nozzle_outer_dimension[axis] / 2);
|
||||
m.obj_side[side] = measurement;
|
||||
}
|
||||
|
||||
@ -272,14 +287,11 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
|
||||
* uncertainty in - How far away from the calibration object to begin probing
|
||||
*/
|
||||
inline void probe_sides(measurements_t &m, const float uncertainty) {
|
||||
TEMPORARY_ENDSTOP_STATE(false);
|
||||
|
||||
#ifdef CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||
constexpr bool probe_top_at_edge = true;
|
||||
#else
|
||||
/* Probing at the exact center only works if the center is flat. Probing on a washer
|
||||
* or bolt will require probing the top near the side edges, away from the center.
|
||||
*/
|
||||
// Probing at the exact center only works if the center is flat. Probing on a washer
|
||||
// or bolt will require probing the top near the side edges, away from the center.
|
||||
constexpr bool probe_top_at_edge = false;
|
||||
probe_side(m, uncertainty, TOP);
|
||||
#endif
|
||||
@ -287,9 +299,11 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
|
||||
#ifdef CALIBRATION_MEASURE_RIGHT
|
||||
probe_side(m, uncertainty, RIGHT, probe_top_at_edge);
|
||||
#endif
|
||||
|
||||
#ifdef CALIBRATION_MEASURE_FRONT
|
||||
probe_side(m, uncertainty, FRONT, probe_top_at_edge);
|
||||
#endif
|
||||
|
||||
#ifdef CALIBRATION_MEASURE_LEFT
|
||||
probe_side(m, uncertainty, LEFT, probe_top_at_edge);
|
||||
#endif
|
||||
@ -297,7 +311,7 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
|
||||
probe_side(m, uncertainty, BACK, probe_top_at_edge);
|
||||
#endif
|
||||
|
||||
/* Compute the measured center of the calibration object. */
|
||||
// Compute the measured center of the calibration object.
|
||||
#if HAS_X_CENTER
|
||||
m.obj_center[X_AXIS] = (m.obj_side[LEFT] + m.obj_side[RIGHT]) / 2;
|
||||
#endif
|
||||
@ -305,8 +319,8 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
|
||||
m.obj_center[Y_AXIS] = (m.obj_side[FRONT] + m.obj_side[BACK]) / 2;
|
||||
#endif
|
||||
|
||||
/* Compute the outside diameter of the nozzle at the height
|
||||
* at which it makes contact with the calibration object */
|
||||
// Compute the outside diameter of the nozzle at the height
|
||||
// at which it makes contact with the calibration object
|
||||
#if HAS_X_CENTER
|
||||
m.nozzle_outer_dimension[X_AXIS] = m.obj_side[RIGHT] - m.obj_side[LEFT] - m.dimensions[X_AXIS];
|
||||
#endif
|
||||
@ -316,8 +330,8 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
|
||||
|
||||
park_above_object(m, uncertainty);
|
||||
|
||||
/* The positional error is the difference between the known calibration
|
||||
* object location and the measured calibration object location */
|
||||
// The difference between the known and the measured location
|
||||
// of the calibration object is the positional error
|
||||
m.pos_error[X_AXIS] =
|
||||
#if HAS_X_CENTER
|
||||
m.true_center[X_AXIS] - m.obj_center[X_AXIS];
|
||||
@ -434,9 +448,9 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
|
||||
// Backlash compensation should be off while measuring backlash
|
||||
|
||||
{
|
||||
// New scope for TEMPORARY_BACKLASH_STATE
|
||||
TEMPORARY_BACKLASH_STATE(false);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0);
|
||||
// New scope for TEMPORARY_BACKLASH_CORRECTION
|
||||
TEMPORARY_BACKLASH_CORRECTION(0.0f);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
|
||||
|
||||
probe_sides(m, uncertainty);
|
||||
|
||||
@ -466,9 +480,9 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
|
||||
// directions to take up any backlash
|
||||
|
||||
{
|
||||
// New scope for TEMPORARY_BACKLASH_STATE
|
||||
TEMPORARY_BACKLASH_STATE(true);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0);
|
||||
// New scope for TEMPORARY_BACKLASH_CORRECTION
|
||||
TEMPORARY_BACKLASH_CORRECTION(1.0f);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
|
||||
move_to(
|
||||
X_AXIS, current_position[X_AXIS] + 3,
|
||||
Y_AXIS, current_position[Y_AXIS] + 3,
|
||||
@ -484,8 +498,9 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
|
||||
}
|
||||
|
||||
inline void update_measurements(measurements_t &m, const AxisEnum axis) {
|
||||
const float true_center[XYZ] = CALIBRATION_OBJECT_CENTER;
|
||||
current_position[axis] += m.pos_error[axis];
|
||||
m.obj_center[axis] = m.true_center[axis];
|
||||
m.obj_center[axis] = true_center[axis];
|
||||
m.pos_error[axis] = 0;
|
||||
}
|
||||
|
||||
@ -501,8 +516,8 @@ inline void update_measurements(measurements_t &m, const AxisEnum axis) {
|
||||
* - Call calibrate_backlash() beforehand for best accuracy
|
||||
*/
|
||||
inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const uint8_t extruder) {
|
||||
TEMPORARY_BACKLASH_STATE(true);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0);
|
||||
TEMPORARY_BACKLASH_CORRECTION(1.0f);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
|
||||
|
||||
#if HOTENDS > 1
|
||||
set_nozzle(m, extruder);
|
||||
@ -510,7 +525,7 @@ inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const
|
||||
|
||||
probe_sides(m, uncertainty);
|
||||
|
||||
/* Adjust the hotend offset */
|
||||
// Adjust the hotend offset
|
||||
#if HOTENDS > 1
|
||||
#if HAS_X_CENTER
|
||||
hotend_offset[X_AXIS][extruder] += m.pos_error[X_AXIS];
|
||||
@ -545,8 +560,8 @@ inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const
|
||||
* uncertainty in - How far away from the object to begin probing
|
||||
*/
|
||||
inline void calibrate_all_toolheads(measurements_t &m, const float uncertainty) {
|
||||
TEMPORARY_BACKLASH_STATE(true);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0);
|
||||
TEMPORARY_BACKLASH_CORRECTION(1.0f);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
|
||||
|
||||
HOTEND_LOOP() calibrate_toolhead(m, uncertainty, e);
|
||||
|
||||
@ -574,23 +589,22 @@ inline void calibrate_all() {
|
||||
reset_nozzle_offsets();
|
||||
#endif
|
||||
|
||||
TEMPORARY_BACKLASH_STATE(true);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0);
|
||||
TEMPORARY_BACKLASH_CORRECTION(1.0f);
|
||||
TEMPORARY_BACKLASH_SMOOTHING(0.0f);
|
||||
|
||||
|
||||
/* Do a fast and rough calibration of the toolheads */
|
||||
// Do a fast and rough calibration of the toolheads
|
||||
calibrate_all_toolheads(m, CALIBRATION_MEASUREMENT_UNKNOWN);
|
||||
|
||||
#if ENABLED(BACKLASH_GCODE)
|
||||
calibrate_backlash(m, CALIBRATION_MEASUREMENT_UNCERTAIN);
|
||||
#endif
|
||||
|
||||
/* Cycle the toolheads so the servos settle into their "natural" positions */
|
||||
// Cycle the toolheads so the servos settle into their "natural" positions
|
||||
#if HOTENDS > 1
|
||||
HOTEND_LOOP() set_nozzle(m, e);
|
||||
#endif
|
||||
|
||||
/* Do a slow and precise calibration of the toolheads */
|
||||
// Do a slow and precise calibration of the toolheads
|
||||
calibrate_all_toolheads(m, CALIBRATION_MEASUREMENT_UNCERTAIN);
|
||||
|
||||
move_to(X_AXIS, 150); // Park nozzle away from calibration object
|
||||
@ -607,6 +621,9 @@ inline void calibrate_all() {
|
||||
* no args - Perform entire calibration sequence (backlash + position on all toolheads)
|
||||
*/
|
||||
void GcodeSuite::G425() {
|
||||
TEMPORARY_SOFT_ENDSTOP_STATE(false);
|
||||
TEMPORARY_BED_LEVELING_STATE(false);
|
||||
|
||||
if (axis_unhomed_error()) return;
|
||||
|
||||
measurements_t m;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user