1445 Commits

Author	SHA1	Message	Date
Scott Lahteine	b71a755a30	Add float suffix in G33	2019-09-17 23:30:27 -05:00
Scott Lahteine	c353eaa146	Misc changes from struct refactor (#15289)	2019-09-17 18:16:28 -05:00
Bas Stottelaar	847e4ced11	Fix M43 without watchdog (#15280)	2019-09-16 16:09:43 -05:00
Scott Lahteine	d5f5203880	Use "mount" as card verb	2019-09-15 03:12:44 -05:00
Scott Lahteine	465c6d9230	Simpler Allen Key config. Fixes, cleanups from refactor (#15256)	2019-09-14 03:05:10 -05:00
Scott Lahteine	f9992c5f33	Implausible	2019-09-11 02:52:14 -05:00
Scott Lahteine	6091e6300a	Fix G90, G91, M82, M83 rel/abs modes (#15218)	2019-09-11 01:29:33 -05:00
Scott Lahteine	c590e8ac05	Improve Power-loss Recovery (#15135)	2019-09-10 18:52:41 -05:00
Scott Lahteine	75927e17dd	Filament Width Sensor singleton (#15191)	2019-09-10 18:48:58 -05:00
Scott Lahteine	584c86bed1	More "zero extruders" changes (#15213)	2019-09-10 02:20:49 -05:00
Scott Lahteine	841c8ce0d9	Remove PROMPT_INFO / PROMPT_GCODE_INFO (#15210)	2019-09-09 15:43:06 -05:00
InsanityAutomation	0693767efa	ExtUI Pause/Stop on all Pause/Stop (#15188)	2019-09-08 01:47:07 -05:00
Lucio Tarantino	8ac52aedff	M118 multiserial support (#15176)	2019-09-08 00:57:59 -05:00
Jamie	dbee0e9c54	Analog joystick jogging control (#14648)	2019-09-08 00:55:34 -05:00
Ludy	068c303742	More translatable LCD strings (#15190)	2019-09-08 00:15:25 -05:00
Scott Lahteine	7496e1cd67	whitespace	2019-09-04 21:55:41 -05:00
Jamie	293b890940	Apply soft limits to G2/G3 final target (#15156)	2019-09-04 13:02:30 -05:00
Giuliano Zaro	9958f5e322	Home on G34 if steppers slept (#15127)	2019-09-02 02:44:48 -05:00
Scott Lahteine	a2e412c0ce	Rename command buffer var	2019-09-01 20:43:31 -05:00
Scott Lahteine	586b334c2a	Split up stepper indirection (#15111)	2019-08-31 19:44:45 -05:00
Luu Lac	081e4506ca	Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (#15069)	2019-08-28 04:20:28 -05:00
InsanityAutomation	b7796bcce6	Disable steppers on M112 (#15065) ... And change verbiage to not refer to "Emergency Stop."	2019-08-28 00:51:01 -05:00
InsanityAutomation	f218405c36	Fix ExtUI invalid speed, timer (#15031)	2019-08-25 04:46:02 -05:00
Scott Lahteine	dd6efe96e7	Restore documented M503 behavior	2019-08-22 18:58:11 -05:00
InsanityAutomation	af5a7a2925	Add missing ExtUI user confirmation (#14992)	2019-08-18 21:03:26 -05:00
Marcio Teixeira	274934ad81	Add LULZBOT_TOUCH_UI (#14967)	2019-08-16 18:34:13 -05:00
Marcio Teixeira	179d6c4ed1	Add STARTUP_SCRIPT option. M17 parity with M18. (#14953)	2019-08-14 21:05:15 -05:00
Joseph Bozarth	0fbb26c28f	M16 - Expected Printer Check (#14924)	2019-08-13 23:38:45 -05:00
Scott Lahteine	c8e30b6639	Fix code attempting to sprintf %f (#14869) ... Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.	2019-08-08 01:51:37 -05:00
Chris Pepper	f499cecf0d	Marlin Binary Protocol Mark II (#14817)	2019-08-05 20:41:53 -05:00
Acenotass	4af9908764	Update M48 command in the status line (#14816)	2019-08-05 20:01:40 -05:00
teemuatlut	d4974ea719	TMC SPI Endstops and Improved Sensorless Homing (#14044)	2019-08-04 22:22:58 -05:00
InsanityAutomation	f59a7e8b07	Print/display ABL current probe point (#14788)	2019-08-01 20:11:26 -05:00
InsanityAutomation	6f8b8c394d	Homing backoff per-axis / delta Z (#14789)	2019-07-31 20:50:23 -05:00
Scott Lahteine	c2b319360d	Remove extra pragmas	2019-07-30 20:19:47 -05:00
Acenotass	659d06d9b9	M48 menu item, result to status (#14772)	2019-07-30 02:31:14 -05:00
rafaljot	e44fccf3d2	Add support for M575 (#14757)	2019-07-30 02:30:00 -05:00
Scott Lahteine	eae543adf3	Apply HAS_SPI_LCD as needed	2019-07-29 18:55:05 -05:00
Giuliano Zaro	290466578f	Adafruit Grand Central M4 (#14749)	2019-07-28 14:48:29 -05:00
Scott Lahteine	17abb94532	Whitespace patch	2019-07-28 01:29:23 -05:00
Ludy	97e9c95f47	Fix & clean up ExtUI (#14748)	2019-07-27 22:44:05 -05:00
Scott Lahteine	a3dc1e461b	Update M7219 comment, tweak parameter code	2019-07-24 21:09:51 -05:00
Scott Lahteine	1088846cae	Cosmetic updates from 14044	2019-07-24 01:52:36 -05:00
InsanityAutomation	dc6fa04f68	Fix single nozzle temp change, do slower extra prime (#14696)	2019-07-21 19:33:37 -05:00
Tim Moore	e5aa453293	Add support for 2 Neopixel strips (#14667)	2019-07-20 23:14:09 -05:00
Jason Smith	f2c5740d06	Add 'E' argument to G34 to allow stowing between probes (#14533) ... - Use the return value from probe_pt during `G34` Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument. - Add '`E`' argument to `G34` command allowing stowing between each probe.	2019-07-17 04:23:19 -05:00
InsanityAutomation	b8cc61262f	Finish G12, update Nozzle::clean (#14642)	2019-07-17 04:23:19 -05:00
Marcio Teixeira	27c487bab7	Print progress enhancements (#14647)	2019-07-17 03:14:44 -05:00
Scott Lahteine	eaf1c0954e	Update some precompiler tests	2019-07-14 13:09:16 -05:00
InsanityAutomation	ce02c6cee2	Variable tool change purge (#14618)	2019-07-14 11:40:58 -05:00
Marcio Teixeira	cbe4bf2ba8	Fix process_injected_command undefined behavior (#14602)	2019-07-14 10:12:48 -05:00
InsanityAutomation	d2f20803ba	Allow nozzle clean with limited Axis (#14619)	2019-07-14 06:58:53 -05:00
Robby Candra	e96468566d	Fix Z_PROBE_END_SCRIPT in ABL (#14621)	2019-07-14 04:28:38 -05:00
scotthsl	19b24a349c	Fix M412 without HOST_ACTION_COMMANDS (#14591)	2019-07-12 04:23:33 -05:00
Scott Lahteine	ed0e6afacb	Apply LIMIT macro	2019-07-10 03:35:39 -05:00
Bob Kuhn	dc02d0720d	Pins Debugging for STM32 — NEEDS TESTING (#14309)	2019-07-05 22:08:06 -05:00
Scott Lahteine	fe02241044	NONE on combined options	2019-07-05 18:20:24 -05:00
Scott Lahteine	750a16ad38	Fix MIN/MAX function collision with macros	2019-07-05 18:14:02 -05:00
Scott Lahteine	b6546ea33a	Add include guards to some headers	2019-07-05 04:02:08 -05:00
Tim Moore	eb6dec03bd	Simplify power supply naming logic (#14488) ... Co-Authored-By: Tim Moore <tim.moore@lightbend.com> Co-Authored-By: AnHardt <github@kitelab.de>	2019-07-05 01:58:34 -05:00
Scott Lahteine	720bc7c00b	Named indices for Temperature class (#14479)	2019-07-02 08:39:55 -05:00
GMagician	82ecaa767e	Remove unused code in M100 ... queue.buffer is in bss area, start_free_memory starts from heap then above of bss	2019-07-01 20:38:49 -05:00
Scott Lahteine	d16954dc88	Make KEEPALIVE_STATE a scoped auto-restore (#14446)	2019-06-29 22:49:50 -05:00
Marcio Teixeira	e6cf7860e8	Improve ExtUI, fix compiler errors, warnings (#14441)	2019-06-29 00:23:57 -05:00
Darsey Litzenberger	946f6bdeaa	Disable leveling during G12 (#14385)	2019-06-28 19:23:42 -05:00
Scott Lahteine	4d5a1984e2	Simplified fan handling code	2019-06-28 18:50:32 -05:00
Scott Lahteine	93cd66ac11	Tweaky change from (C) to (c)	2019-06-27 23:58:16 -05:00
Scott Lahteine	d7d80418ae	Singleton for cutting tools (#14429)	2019-06-27 23:06:49 -05:00
Tim Moore	81209f5310	'M105 R' to report redundant temp sensor (#14324)	2019-06-27 21:29:52 -05:00
InsanityAutomation	ce656e2a26	Update G-code injection, sub-commands (#14418)	2019-06-27 15:07:45 -05:00
Scott Lahteine	2580104c8b	Revert recent probe changes ... - Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)" - Revert "Fix G28 with non-BLTouch probes (#14381)" - Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)" - Revert "Apply needed BLTouch patch (#14233)" Co-Authored-By: AnHardt <github@kitelab.de>	2019-06-26 05:33:43 -05:00
BigIronGuru	9f136a7c67	Low-priority homing in G34 (#14391)	2019-06-26 03:52:01 -05:00
Scott Lahteine	49627069a5	Shorthand for home-after-deactivate	2019-06-26 03:47:55 -05:00
Marcio Teixeira	8e23e9b16c	Fix FIX_MOUNTED_PROBE compile error (#14393)	2019-06-25 04:55:29 -05:00
Scott Lahteine	cf762d2c73	Fix enqueueing bug	2019-06-23 23:02:07 -05:00
BigIronGuru	12d21e642f	Update G34 for non-BLTouch probes (#14380)	2019-06-23 20:55:43 -05:00
BigIronGuru	5986194c36	Fix G28 with non-BLTouch probes (#14381)	2019-06-23 20:53:05 -05:00
InsanityAutomation	aa0383a83b	Enhance IDEX toolchange auto-return w/ no park, full control (#14117)	2019-06-23 20:00:48 -05:00
Scott Lahteine	17778d1c2a	Fix M916-918 subcommands	2019-06-22 16:18:42 -05:00
Tanguy Pruvot	be69ec5b32	Fix PLR/M43 warnings (#14333)	2019-06-22 00:48:47 -05:00
BigIronGuru	9c83135d40	Only home Z at the end of G34 (#14353)	2019-06-22 00:43:33 -05:00
LinFor	0f6f5132c1	Fix variable conflict in ok_to_send (#14351)	2019-06-21 19:04:30 -05:00
InsanityAutomation	a9acd2f497	G34 configurable angle limit (#14321)	2019-06-20 21:18:36 -05:00
Scott Lahteine	4df4c47994	Add TMC2209 support (#14249)	2019-06-20 15:47:50 -05:00
Scott Lahteine	4c872a01f2	G-code queue singleton, front injection (#14236)	2019-06-19 00:00:19 -05:00
InsanityAutomation	bf64dd4db6	Improve G34, M422 (Z alignment) (#14142)	2019-06-18 07:02:18 -05:00
Scott Lahteine	3f6424076b	Update M524 description	2019-06-18 05:04:55 -05:00
Scott Lahteine	cf3631226b	Document G-code M290	2019-06-18 04:53:31 -05:00
Scott Lahteine	903863dcb6	Suppress some warnings	2019-06-15 17:47:59 -05:00
mb300sd	bf8bfb5c66	Add Coolant Control M7/M8/M9 (#10745)	2019-06-13 18:43:11 -05:00
Scott Lahteine	bc2ff9b41f	Fix M605 bugs ... Fixes #14191	2019-06-12 20:01:08 -05:00
Scott Lahteine	04715e04ee	Minor M100 cleanup	2019-06-12 06:14:40 -05:00
Scott Lahteine	356410dcfc	Move crc16 function to libs	2019-06-12 06:14:39 -05:00
Scott Lahteine	1ef95013f0	Update Marlin.cpp includes, defines	2019-06-11 07:30:51 -05:00
Tanguy Pruvot	8cf5504a34	Redundant but faster recovery.enabled test (#14175)	2019-06-10 23:33:35 -05:00
Scott Lahteine	0ca2073625	ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT	2019-06-10 17:28:35 -05:00
Robby Candra	5ca8d51e12	Ability to insert G-code in front of queue (#14229)	2019-06-08 05:23:53 -05:00
Ludy	8e8e48f900	Fix links in templates, gcode.h (#14160)	2019-05-28 21:39:55 -05:00
Minims	32afe1d102	Fix TOOLCHANGE_ZRAISE warning (#14156)	2019-05-27 19:51:29 -05:00
Scott Lahteine	3c179bbd47	Simpler G28 home axis conditions	2019-05-26 16:26:55 -05:00
Scott Lahteine	352734494b	Reduce some M43 strings	2019-05-26 16:21:28 -05:00
Scott Lahteine	b14cc0d7c5	Remove extra gcode. prefix	2019-05-26 16:18:45 -05:00
Scott Lahteine	c6d39319de	Fix some whitespace	2019-05-26 16:18:43 -05:00
InsanityAutomation	212860f090	Always change to Tool 0 on G29 (#14146)	2019-05-26 14:53:21 -05:00
Bryan	0ef5d667b6	Fixed M43 parameter bug (#14099)	2019-05-25 18:23:25 -05:00
teemuatlut	1c86fbc60b	TMC updates, capture LCD changes (#14074)	2019-05-25 18:22:12 -05:00
Scott Lahteine	fc52c43a26	Some documentation updates	2019-05-24 16:30:44 -05:00
Tanguy Pruvot	24b1818245	Secure STM32F1 servo code and M280 detach (#14085)	2019-05-22 16:57:19 -05:00
Scott Lahteine	aeec9ef76b	Update backlash code	2019-05-20 21:34:08 -05:00
Tanguy Pruvot	87e7193259	Fix M226 sign warning (for most platforms) (#14049)	2019-05-18 16:15:48 -05:00
FanDjango	85fb33a060	BLTOUCH tweaks, new v3.1 command (#14015)	2019-05-17 19:10:18 -05:00
Scott Lahteine	785c01f2bc	Use US spelling of 'behavior'	2019-05-15 01:49:17 -05:00
Sam Lane	7f1e0c5670	Update EXTRA_LINADV_K with Marlin bit macros (#13993)	2019-05-15 01:07:07 -05:00
Robby Candra	7b78a20fb7	Fix: Debug Memory Dump size (#13957) ... * Fix Memory Dump size * Fix Compile error on Memory Dump	2019-05-11 11:44:39 -05:00
Giuliano Zaro	f22c9a1ae1	Fix G-code parser with MMU2 (#13951)	2019-05-10 19:57:15 -05:00
Bob Kuhn	fa3739aa23	M100: LPC1768 and DUE compatibility (#13962)	2019-05-09 21:57:44 -05:00
Scott Lahteine	ad4ffa1d2f	Use C++ language supported 'nullptr' (#13944)	2019-05-09 11:45:55 -05:00
InsanityAutomation	6811e2921b	BLTouch v3 / 3DTouch Interoperability & performance (#13814)	2019-05-07 21:25:54 -05:00
Ludy	a504366138	Fix probe fan compiling error (#13930)	2019-05-07 14:14:12 -05:00
Stephan	483822f3aa	Fix some THERMAL_PROTECTION_CHAMBER issues (#13678)	2019-05-06 19:55:01 -05:00
doggyfan	23a8707ef1	Configurable Thermistor (#13888)	2019-05-06 18:51:06 -05:00
Ludy	f96eaad1ea	Unused variable cleanup (#13917)	2019-05-05 22:01:04 -05:00
Giuliano Zaro	e2a77ed881	Bring chamber temp to completion (#13837)	2019-05-04 22:51:47 -05:00
Marcio Teixeira	15357af67c	Backlash cleanup (#13659) ... …And save backlash, fil. sensor, ExtUI userdata to EEPROM.	2019-05-03 23:53:15 -05:00
Robby Candra	c369477cb0	Fix bug: diveToFile breaks M23 (#13865)	2019-05-02 15:54:24 -05:00
Thomas Moore	ee243e4edf	Fix mixing extruder filament change (#13803)	2019-05-01 21:55:58 -05:00
InsanityAutomation	610fb46683	Fix some ExtUI issues (#13799)	2019-04-26 09:32:01 +02:00
Bob-the-Kuhn	73726d56b3	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-25 12:06:01 -05:00
Scott Lahteine	5051909c3c	Update do_select_screen for general use (#13800)	2019-04-24 10:13:44 -05:00
Giuliano Zaro	e2dd2268e8	Add a Z raise-between-probes to G34 (#13791)	2019-04-23 13:40:55 -05:00
Scott Lahteine	0c4d3e6622	Improve M906 description	2019-04-22 13:48:02 -05:00
Bob-the-Kuhn	520585c5ed	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-17 15:34:29 -05:00
Scott Lahteine	92ed9a2bb6	Fix is_M29 ... Followup for #13013	2019-04-15 23:47:06 -05:00
Scott Lahteine	9992c424f5	Patch G92.9 flags ... Followup to #13703	2019-04-15 20:26:40 -05:00
Msq001	455ee23499	Fix, improve Power Loss Recovery (#13703) ... - Save and restore workspace offsets - Add retract and purge (hidden) options - Always restore axis relative modes - Use added `G92.9` to do position restores	2019-04-15 18:53:39 -05:00
InsanityAutomation	aa0f7afbe6	Fix call to uninitialized PWM pin, heater 2 overlap (#13674)	2019-04-15 15:57:34 -05:00
Bob-the-Kuhn	9dd4252b39	Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x	2019-04-12 22:07:12 -05:00
Scott Lahteine	7e58d33a2e	Update some headers	2019-04-12 13:04:04 -05:00
Jamie	509dc283f2	Restore declarations of G53-G59 (#13654)	2019-04-11 13:51:05 -05:00
InsanityAutomation	4900c28bf6	Fix IDEX tool-change, and more (#13614)	2019-04-09 18:33:40 -05:00
Scott Lahteine	5e38d70697	Fix M217 report label, general cleanup	2019-04-08 18:18:08 -05:00
Scott Lahteine	fae2b7edc3	Update MMU2 code style	2019-04-08 18:13:42 -05:00
Scott Lahteine	c8a83fb122	SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA	2019-04-08 18:13:41 -05:00
Bob Kuhn	9a56d90150	Fix M43 on LPC176x (#13587) ... The real fix. PR #13568 was wrong.	2019-04-06 18:06:07 -05:00
Roxy-3D	9cee81d47e	Option to show babysteps total since G28 (#13580)	2019-04-06 18:04:34 -05:00
Scott Lahteine	cf12fc8366	Expand on serial debugging (#13577)	2019-04-05 20:02:46 -05:00
Marcio Teixeira	bf7b28b456	Fix incorrect variable name (#13585)	2019-04-05 19:04:46 -05:00
Scott Lahteine	cacec5764a	Clean up whitespace	2019-04-04 22:12:02 -05:00
Marcio Teixeira	27a4927ed1	Add option to move away from endstop after homing. (#13557) ... Add option to move away from endstop after homing. - Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6). - Also prevents chattering when sensorless homing with axes against bumpers.	2019-04-04 02:47:19 -05:00
Scott Lahteine	af92ee9dd6	No PLR include needed in queue.cpp	2019-04-03 18:26:31 -05:00
Scott Lahteine	2aa35e95af	More G26 arc cleanup ... Followup to #13531	2019-04-03 16:03:21 -05:00
Scott Lahteine	a0a5c31c05	Power-Loss initialization fix (#13553) ... - Only save to PLR file on moves with E and X or Y - Save to PLR after any long-ish Z downward move	2019-04-01 17:52:45 -05:00
InsanityAutomation	fbc7b51a24	Use NO_FETCH for Dual X G28 (#13539)	2019-04-01 17:48:21 -05:00
InsanityAutomation	4961d8aa3e	Update G28.cpp (#13539)	2019-03-31 19:50:40 -05:00
ManuelMcLure	04086fc455	Minor optimization to ARC_SUPPORT code (#13531)	2019-03-30 22:29:37 -05:00
Robby Candra	a3f67acd6d	Fix Power Loss Recovery file delete (#13522)	2019-03-30 13:14:58 -05:00
Marcio Teixeira	5679fae11e	UltraLCD enhancements (lower fan resolution, backlash menu) (#13519)	2019-03-29 14:07:43 -05:00
Marcio Teixeira	c6466c23fe	Silence signed/unsigned comparison warning. (#13508)	2019-03-29 13:33:45 -05:00
InsanityAutomation	7240e3a68f	Allow G26 with no heated bed (#13511)	2019-03-29 13:32:43 -05:00
Sam Lane	e3ab54753b	Add extra Linear Advance factors (#13490)	2019-03-26 04:02:27 -05:00
Thomas Moore	263f8edff8	Disable volumetric extrusion during G26 (#13479)	2019-03-25 22:41:52 -05:00
Chris Pepper	aacc1148b0	Fix M106 for index > extruders (#13473)	2019-03-24 20:03:53 -05:00
7eggert	d96f7d6068	Minimum segments for G2/G3. Better for small arcs. (#13466)	2019-03-24 19:53:47 -05:00
Sam Lane	a8fa275dc6	Fix Fan 0 responding to all fan speeds (#13444)	2019-03-23 23:00:31 -05:00
InsanityAutomation	5b2c37d6c1	Followup to BLTouch (#13422)	2019-03-18 16:31:11 -05:00
InsanityAutomation	3fb8489ae3	EXTUI and UBL compilation fixes (#13420)	2019-03-17 07:57:54 -05:00
Scott Lahteine	b376c7e374	Group DISABLED items	2019-03-17 07:56:35 -05:00
InsanityAutomation	691e5c3bb8	BLTouch V3.0 support (#13406)	2019-03-17 05:57:25 -05:00
Scott Lahteine	49cf92dc36	Extended condition macros (#13419) ... Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
InsanityAutomation	09eb30dc05	IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404)	2019-03-15 22:46:27 -05:00
Scott Lahteine	9a515cbd32	Fix Pause Print message and behavior (#13394)	2019-03-14 02:26:07 -05:00
Scott Lahteine	f5bcc00570	Unify debugging output with debug_out.h (#13388)	2019-03-14 02:25:42 -05:00
Andrei Pozolotin	cc8a871705	Add capability string CHAMBER_TEMPERATURE (#13391) ... Reference: #13380	2019-03-13 18:09:22 -05:00
Scott Lahteine	67bee06e43	No patch needed for non-libmaple analogWrite ... See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743	2019-03-13 07:21:10 -05:00
Scott Lahteine	f89b375fb9	Fixes and improvements for PWM pins (#13383)	2019-03-13 06:51:15 -05:00
Scott Lahteine	87162658c4	Fix and improve software endstops (#13386)	2019-03-13 05:48:36 -05:00
InsanityAutomation	c03df89921	ExtUI Mesh Leveling Extensions (#13363)	2019-03-13 00:45:52 -05:00
InsanityAutomation	050eac03af	Single X Duplication Extension (#13373) ... * Multi-nozzle selective duplication * Use a bit-mask, reduce stepper_indirection.h size * Tweak the multi-nozzle duplication description * Use 'S' as a bool in M605 * Add HAS_DUPLICATION_MODE conditional * Remove '_MODE' from the option name * M605 in the style of Stacker M280 * Also include direct mask style (P)	2019-03-13 00:42:50 -05:00
Scott Lahteine	d63da4592d	Tweak to SCARA_move_to_cal	2019-03-12 22:06:50 -05:00
Scott Lahteine	d94e077901	Apply HAS_HOTEND_OFFSET where needed	2019-03-11 20:58:27 -05:00
Scott Lahteine	e52bcc9408	Limit top bed temp to BED_MAXTEMP - 10 ... The chances of a 10° overshoot is pretty minimal.	2019-03-11 16:32:34 -05:00
Michiel Baird	b824a517aa	Add G38.4 and G38.5 (#13348)	2019-03-10 17:22:09 -05:00
Tobias Frost	60e82e3929	Send notifications to ExtUI for M0/M1 (#13344) ... - Send notifications to ExtUI for M0/M1 - wait_for_user can be non-volatile (not changed by interrupt) C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.	2019-03-09 14:20:37 -06:00
Marcio Teixeira	00fc43144a	Follow up fixes to various PRs. (#13334) ... - Ensure `MarlinUI:get_progress` is defined for `ExtUI`. - Fix for `BACKLASH_SMOOTHING` with small segments. `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments. - Add pinout for the beta revision `EINSY_RETRO`. - Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)	2019-03-09 14:20:37 -06:00
InsanityAutomation	d54741eda8	Update some G26 plausible values. Add speed control. (#13330)	2019-03-08 03:13:44 -06:00
3dlabsio	645ca7af7a	M141 Heated Chamber, Temperature rework (#12201)	2019-03-07 02:09:39 -06:00
Scott Lahteine	cfdb38eda4	Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311)	2019-03-05 06:46:19 -06:00
Scott Lahteine	2e5a3b01fd	Save Power Loss Recovery only on move commands	2019-03-05 02:43:29 -06:00
Scott Lahteine	2212da453a	Distinguish between analog/digital auto fans (#13298)	2019-03-05 00:41:31 -06:00
Chris Pepper	2513f6b550	Fix multiport G28 with Binary Transfer (#13308)	2019-03-04 16:44:54 +00:00
Scott Lahteine	35ae5daf2d	Split up sdcard G-codes	2019-03-03 01:52:15 -06:00
Scott Lahteine	3f36a38512	Clean up some pre-serial-redirect includes	2019-03-03 01:52:15 -06:00
Scott Lahteine	edc4e037c4	Add a note to G10	2019-03-02 17:19:36 -06:00
Chris Pepper	b0553d2d97	Add M997 support and simple implementation for LPC176x (#13281)	2019-03-01 20:11:50 -06:00
Scott Lahteine	2f1e1dcb42	Gradual step towards EXTRUDERS 0 support	2019-03-01 01:51:24 -06:00
Scott Lahteine	99d0022fae	Drop the Z_MIN_PROBE_ENDSTOP option (#13276)	2019-03-01 00:27:45 -06:00
Chris Pepper	7de6476b3d	Fix binary protocol error	2019-02-28 02:31:42 +00:00
Scott Lahteine	2c10222e87	card.transfer_port => transfer_port_index	2019-02-27 20:14:17 -06:00
Chris Pepper	4ab433d391	Fix binary protocol with one serial port (#13270) ... - The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number. - Added packet number to "ok" response so hosts don't need to wait for the ACK. - Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.	2019-02-27 19:57:48 -06:00
Bob Kuhn	ddbe4cfa20	Printrboard G2 support (#13116)	2019-02-26 21:03:13 -06:00
Scott Lahteine	5d28575d4d	Clean up some motion code	2019-02-25 16:01:42 -06:00
Scott Lahteine	808b076000	Update some ABL/UBL conditionals	2019-02-25 16:01:42 -06:00
Scott Lahteine	64253e1a58	Followup to serial reform ... Reference #13250	2019-02-25 00:20:36 -06:00
Minims	92a4984066	Fix G34 probe position (#13251)	2019-02-24 13:57:30 -06:00
Scott Lahteine	e15354e387	Simplify serial port redirect (#13234)	2019-02-23 22:53:01 -06:00
Bruce j Beare	562f2321d2	Fix a G34 bug, allow negative Z corrections (#13240)	2019-02-23 02:41:52 -06:00
Marcio Teixeira	109e67169c	Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) ... Ticket #13228 If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.	2019-02-22 15:35:32 -06:00
Scott Lahteine	80359c9937	Add more parameters to M240 ... Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>	2019-02-20 14:51:36 -06:00
Scott Lahteine	89bbc30a09	Fix init of power supply pin ... Fix #13184	2019-02-20 05:29:05 -06:00
LinFor	ba39186364	TMC_DEBUG optimization and improvements (#13135)	2019-02-20 02:22:42 -06:00
Scott Lahteine	3a1b6fe8c1	Coding standards	2019-02-19 14:58:39 -06:00
InsanityAutomation	19af90face	Fix a host action compile error (#13208)	2019-02-19 14:47:31 -06:00
Scott Lahteine	e00aad84af	Add M240 parameters D I J R S	2019-02-14 20:00:40 -06:00
Marcio Teixeira	31c240a8db	Enhancements to G425 (#13159) ... - Turn off bed leveling prior to calibrating. - This prevents lateral probes from having a Z component that triggers the Z endstop and causes the motion to be aborted. - Got rid of static const float arrays "dimension" and "true_center" - Frees up 24 bytes of SRAM - Changed incorrect use of "bool" for float in backlash macros. - Replaced arguments with 0.0f and 1.0f for clarity. - Now only disables soft endstops (since calibration cube is outside of bed) - Not necessary to disable global endstops	2019-02-14 16:45:31 -06:00
Scott Lahteine	ab2816c870	Patch for M240	2019-02-14 15:13:57 -06:00
Scott Lahteine	d2bdb71c13	Add PHOTO_GCODE option, photo trigger physical move (#13168)	2019-02-14 15:09:35 -06:00
Scott Lahteine	be9a409980	Fix M125 XY parameters, export get_homing_bump_feedrate	2019-02-14 05:25:46 -06:00
Scott Lahteine	ce40c2e87c	Use do_blocking_move_to(ref, fr)	2019-02-14 02:22:08 -06:00
Scott Lahteine	7cf9b93f26	Add HAS_FILAMENT_SENSOR ahead of 12962	2019-02-12 20:13:20 -06:00
revilor	e56c13670d	Service interval watchdog (#13105)	2019-02-12 15:58:56 -06:00
InsanityAutomation	7f1b69b0c8	Add HOST_PROMPT_SUPPORT (#13039)	2019-02-12 15:55:47 -06:00
Scott Lahteine	0feeef2604	Update copyright in headers	2019-02-12 15:30:11 -06:00
Scott Lahteine	894f5c24a8	Fix trailing whitespace	2019-02-12 14:25:57 -06:00
Roman Moravčík	bace52afd7	Fixed compilation with MMU2_MENUS disabled (#13140)	2019-02-12 12:55:49 -06:00
Scott Lahteine	9737608f0a	Enable gradient when alias is cleared	2019-02-10 06:39:12 -06:00
Scott Lahteine	6de3d34378	M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022)	2019-02-10 04:54:23 -06:00
AnHardt	0e37fe8776	Apply minimum C in M303 (#13113) ... Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104	2019-02-10 03:54:45 -06:00
Scott Lahteine	f269766408	Put the MMU2 menu with the others	2019-02-06 17:38:46 -06:00
Marcio Teixeira	e1604198ff	G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050)	2019-02-06 17:20:17 -06:00
Mark Zachmann	19cf72e057	Support individual solenoid disable with M381 (#13008)	2019-02-06 06:34:53 -06:00
teemuatlut	d81342254a	Support new TMC drivers (#13026)	2019-02-06 06:33:14 -06:00
Rolf Werum	524c6c10bf	MAGNETIC_PARKING_EXTRUDER (#12351)	2019-02-06 06:30:53 -06:00
Scott Lahteine	1bd9a63049	Add HAS_EXTRA_ENDSTOPS macro	2019-02-06 05:10:05 -06:00
Scott Lahteine	1497fb388a	M29 match logic was reversed (#13013) ... * M29 logic was reversed If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?" * Update queue.cpp * Update queue.cpp	2019-02-04 07:23:42 -06:00
Scott Lahteine	b5fd2fb58b	Allow M29 to be processed late	2019-02-04 07:23:02 -06:00
Scott Lahteine	c03bac9ad4	Update queue.cpp	2019-02-04 07:17:40 -06:00
Scott Lahteine	a49f0205ea	Update queue.cpp	2019-02-04 07:11:08 -06:00
jeffstaley	2f176d6fb8	Flush RX buffer on G-code line errors to prevent hang (#13018)	2019-02-04 06:03:49 -06:00
Scott Lahteine	4200bd2fc1	Report on M92 with no arguments (#12833)	2019-02-04 05:24:15 -06:00
Scott Lahteine	433518de74	Prevent M420 error from disconnecting OctoPrint ... Just echo the error instead of labeling it `Error:`.	2019-02-04 01:54:43 -06:00
Scott Lahteine	4fa1c52688	Tweak serial output code	2019-02-03 01:09:14 -06:00
Scott Lahteine	a5e3384691	Pre-apply cosmetic changes to mixing	2019-02-03 01:09:14 -06:00
mattfredwill	c3cb449990	TMC2130 dual-stepper Sensorless Homing (#13061)	2019-02-01 18:09:01 -06:00
revilor	6a57d0b381	Prusa MMU2 (#12967)	2019-01-31 19:10:52 -06:00
InsanityAutomation	a1d03fe7ba	Fix single nozzle fan (#13038)	2019-01-30 20:54:04 -06:00
Scott Lahteine	97da6c1da5	Use MIN/MAX for min/max	2019-01-28 20:36:13 -06:00
Giuliano Zaro	a79d80c78e	Minor cleanup of pause code (#13030)	2019-01-27 23:10:25 -06:00
InsanityAutomation	48a3502656	Remote streamer improvements (#12982)	2019-01-27 22:43:13 -06:00
jeffstaley	3f91233f6d	M29 logic was reversed ... If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"	2019-01-25 07:36:52 -08:00
jeffstaley	0e0cc13650	Fix M29 for Pronterface SD card upload (#13010)	2019-01-24 21:10:59 -06:00
Scott Lahteine	8f9b246d0e	Tweak some formatting, replace tabs	2019-01-24 13:18:56 -06:00
Bob Kuhn	2f35747f29	L6470 SPI daisy chain support (#12895)	2019-01-23 19:06:54 -06:00
Scott Lahteine	6453b82a5e	Clean up trailing whitespace	2019-01-23 15:57:01 -06:00
InsanityAutomation	a1cf49935d	Add laser control menu (#12883)	2019-01-20 23:41:47 -06:00
InsanityAutomation	75f2665f2e	LCD SD Card items near top when not using wheel (#12926)	2019-01-20 23:24:53 -06:00
Scott Lahteine	0495fcd475	Minor spacing fix	2019-01-20 00:10:50 -06:00
Ludy	acf266fe78	Fix a compile warning, etc. (#12955)	2019-01-19 18:47:29 -06:00
Scott Lahteine	ce563d7c2e	Various general cleanups ... Mostly from the L6470-oriented PR	2019-01-19 16:56:12 -06:00
teemuatlut	e6805582a6	M569 to change stepping mode. Add new TMC section to LCD. (#12884)	2019-01-17 13:17:16 -06:00
Marcio Teixeira	f11c6d5d02	Fix M107 when dual-nozzles share fan (#12819) (#12909)	2019-01-15 18:45:18 -06:00
InsanityAutomation	59b18aaeef	Allow resume from pause with parking enabled (#12893) ... Currently, Pause of an SD-Memory card print does not work. This has been verified to resolve the issue by multiple people. I understand more work needs to be done to resolve some of the concerns...	2019-01-15 07:58:54 -07:00
Giuliano Zaro	85f149befe	Save some progmem (#12913)	2019-01-14 20:56:30 -06:00
teemuatlut	1a79878dff	Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN	2019-01-12 18:07:28 -06:00
Scott Lahteine	7cfce20cd3	Update comments on M125	2019-01-12 17:52:44 -06:00
InsanityAutomation	ed3ab5e212	Fix M24 not starting new job (#12887)	2019-01-12 15:30:44 -06:00
InsanityAutomation	082f6a27de	ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853)	2019-01-12 00:41:48 -06:00
InsanityAutomation	a403d9a50c	Improve menu pause / resume (#12876)	2019-01-11 20:42:11 -06:00
Scott Lahteine	fb8111553e	getStatus => report_status	2019-01-11 19:51:00 -06:00
Giuliano Zaro	709a6356f7	Remove obsolete test conditions (#12829)	2019-01-05 14:02:45 -06:00
Luu Lac	bcf347403b	Fix M106 extruder & fan count (#12820)	2019-01-05 14:01:35 -06:00
Marcio Teixeira	81e753064a	Fix ExtUI compile warnings and error (#12799)	2019-01-03 08:36:43 -06:00
Ludy	14a7faf087	Fix compile warning comparison uint and int (#12788)	2019-01-01 18:20:12 -06:00
Marcio Teixeira	60cb36bef3	Misc. improvements (#12747) ... * Make ExtUI respect MAXTEMP limits - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values. * Speed up USB init, add status - Speed up USB initialization - Show status message if init failed * Enable status messages for EXTENSIBLE_UI * Adjust max limit to MAX_TEMP - 15 * Misc. tweaks to formatting, const, etc.	2019-01-01 15:17:48 -06:00
InsanityAutomation	4f2473053c	Fix M106 with SINGLENOZZLE	2018-12-31 20:10:18 -06:00
Ludy	814d93c7cf	Fix G33 sprintf output warning (#12738)	2018-12-27 18:05:42 -06:00
InsanityAutomation	530ef5846f	Make nomove=false for toolchange on filament swap (#12739)	2018-12-27 11:38:35 -06:00
Luc Van Daele	c6e09c2689	[2.0.x] G33 clean up (#12648) ... Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug	2018-12-18 12:43:38 -06:00
Marcio Teixeira	902d5b0f8b	Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628)	2018-12-12 17:21:37 -06:00
teemuatlut	55144284c2	TMC connection test, spreadCycle parameters, improved debugging (#12616)	2018-12-09 20:54:48 -06:00
MasterPIC	3bb8b3529a	Center ABL grid on bed with H parameter. (#12610)	2018-12-09 11:24:48 -06:00
Marcio Teixeira	b22716e938	M425 Backlash Correction (#11061)	2018-12-08 14:36:46 -06:00
Scott Lahteine	b7e38ea249	Signal an invalid mesh for M420 enable / load	2018-12-07 16:14:11 -06:00
teemuatlut	50b2fbd031	Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582)	2018-12-07 15:34:21 -06:00
Scott Lahteine	261c6f4b96	Fix pause/resume SD print ... Followup to #12551, addressing #12566	2018-11-30 19:23:08 -06:00
Scott Lahteine	aaf862aef2	Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559)	2018-11-30 12:31:42 -06:00
Scott Lahteine	c986239837	A single SERIAL_ECHO macro type (#12557)	2018-11-29 16:58:58 -06:00
Scott Lahteine	03ef2d6c82	Fix "paused" message and M125 called by M25 (#12551)	2018-11-28 19:28:31 -06:00
Scott Lahteine	5b24ce9024	Hide M217 compile warning	2018-11-26 16:52:16 -06:00
Scott Lahteine	1fcc13b011	Allow Serial Overrun Protection to be disabled	2018-11-23 21:07:38 -06:00
Scott Lahteine	d29cb09b3e	Fix a minor compile warning	2018-11-22 05:35:38 -06:00
Scott Lahteine	817a37169a	Apply/unapply const here and there	2018-11-20 06:44:21 -06:00
Scott Lahteine	a4c15dc54f	Modify MBL to use IJ instead of XY (#12478)	2018-11-19 09:08:15 -06:00
kAdonis	4ae9a06c60	Update M303.cpp (#12471)	2018-11-18 18:04:51 -06:00
Marcio Teixeira	c1e17037e5	Various fixes for MarlinUI and ExtUI (#12439)	2018-11-17 22:21:44 -06:00
Giuliano Zaro	43ecdb606f	Fix a compile warning (#12452)	2018-11-17 07:08:25 -06:00
Ludy	56a94c2a26	Use 'target_extruder' in M104 as with M109 (#12448)	2018-11-17 06:55:25 -06:00
Scott Lahteine	66580f32c2	Make CardReader class static (#12451) ... * Make CardReader a static class * Make CardReader flags into bitfields	2018-11-16 22:39:16 -06:00
Scott Lahteine	d97e31db4c	Optimize Power-Loss Recovery (#12440)	2018-11-16 20:47:07 -06:00
Scott Lahteine	0e610815e4	No need for Cap:PAREN_COMMENTS	2018-11-16 04:28:40 -06:00
Scott Lahteine	7a075a5dc9	Tweak extruder errors	2018-11-16 01:32:21 -06:00
Scott Lahteine	2d92f333f5	Fix GcodeSuite::T active_extruder reference	2018-11-15 14:07:24 -06:00
Scott Lahteine	d2bb53702a	Optimize target_extruder, ignore T with mixing (#12432) ... * Optimize target_extruder, ignore T with mixing * Give G-code Tn parity with tool_change	2018-11-14 17:33:04 -06:00
Scott Lahteine	d82c350de7	Miscellaneous LCD code renaming, reordering (#12430) ... * Move special characters to language.h * Apply some naming standards * Clean up menu item draw functions * Rename some Temperature methods * UI => ExtUI	2018-11-14 13:13:51 -06:00
Scott Lahteine	54ec5528a0	hasstatus => has_status	2018-11-14 01:34:28 -06:00
Roxy-3D	cda5ef08fa	Debug of G2-G3 for UBL (#12386) ... Changes only affect UBL. Everything else is left alone.	2018-11-13 11:20:21 -06:00
Scott Lahteine	143b2896e0	Add M412 to enable/disable filament runout detection (#12406)	2018-11-12 21:29:46 -06:00
Scott Lahteine	a163c89c6a	Followup to 50af1d1	2018-11-12 20:31:53 -06:00
Scott Lahteine	50af1d1e08	Differentiate translated On/Off from Serial ON/OFF	2018-11-12 17:23:08 -06:00
Scott Lahteine	da17f8ad37	For now (!) don't synchronize in M204 and M205 ... See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.	2018-11-12 02:43:24 -06:00
Scott Lahteine	a0c795b097	Encapsulate common display code in a singleton (#12395) ... * Encapsulate common LCD code in a singleton * Depend more UBL code on UBL_DEVEL_DEBUGGING - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.	2018-11-11 12:16:24 -06:00
Scott Lahteine	471f403a67	Reduce code size with plain inlines	2018-11-11 08:36:10 -06:00
Scott Lahteine	6093df11dc	Allow G26 to use the active extruder (#12387) ... * Make lcd_quick_feedback argument optional * Add click_to_cancel option to wait_for_hotend/bed * Have G26 use the active nozzle and wait_for_hotend/bed * Use wait_for_release in UBL G29 * Add 'T' parameter to G26 for an initial tool-change	2018-11-10 18:07:38 -06:00
Scott Lahteine	bed15fcd81	Tweak 'echo_not_entered' used by MBL's G29	2018-11-10 01:32:51 -06:00
Scott Lahteine	78ccedd6a8	Fix M91x sanity-check to permit TMC2660 ... Fix #12362	2018-11-09 05:48:15 -06:00
revilor	b60abc7c37	[2.0.x] Macro G-codes (#9365)	2018-11-09 05:25:08 -06:00
InsanityAutomation	6471a75a22	Combine more tool-change variables (#12137)	2018-11-06 22:22:20 -06:00
Scott Lahteine	812f6a7dd7	Fix Resume from SD Pause ... In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690	2018-11-06 21:09:37 -06:00
Scott Lahteine	488a17b3f5	Use IS_SD_PRINTING() more	2018-11-06 20:55:17 -06:00
Marcio Teixeira	4dbaa6369f	Fix const pointer assignment compile error (#12350)	2018-11-06 19:49:39 -06:00
Scott Lahteine	e574f01568	More advanced pause tweaks (#12356) ... * Followup to LCD_TIMEOUT_TO_STATUS=0 * Make continuous purge screen fit 20x4 * Unify purge message modes * Preserve last-set pause header mode	2018-11-06 19:25:57 -06:00
Scott Lahteine	4c5ca89d8c	Show the appropriate pause message (#12348)	2018-11-06 04:13:48 -06:00
Scott Lahteine	b3b4e6dc45	Change Marlin debug flag names to fix conflicts (#12340) ... In reference to #11000	2018-11-05 22:48:28 -06:00
Scott Lahteine	04f173790f	Remove trailing whitespace	2018-11-05 22:38:20 -06:00
Scott Lahteine	486f2a66a9	Fix MBL XY parameter error messages ... Fix #11522	2018-11-05 04:17:37 -06:00
Scott Lahteine	2613ddf61c	Fix "circle"	2018-11-05 04:17:37 -06:00
Scott Lahteine	427bc64ba1	G28 O respects HOME_AFTER_DEACTIVATE ... Addressing #11271	2018-11-05 04:17:37 -06:00
Scott Lahteine	498dfa291e	Update and fix CHDK	2018-11-05 04:17:37 -06:00
Scott Lahteine	3cbc3ecdd7	Fix 'M43 T' to use 'L' as last pin ... - The documentation is correct. The code was wrong.	2018-11-05 04:17:37 -06:00
Scott Lahteine	07a0822ebe	M420 support in MARLIN_DEV_MODE	2018-11-04 20:54:38 -06:00
Scott Lahteine	44fa7fb18c	Cleanups for leveling-related code	2018-11-04 19:07:47 -06:00
Scott Lahteine	cc2bc67440	ENABLED(NEWPANEL) => HAS_LCD_MENU	2018-11-04 19:06:10 -06:00
Scott Lahteine	f5eab912ed	Apply #pragma once, misc cleanup (#12322) ... * Apply #pragma once in headers * Adjust some thermistors formatting * Misc cleanup and formatting	2018-11-04 02:25:55 -06:00
Scott Lahteine	d1ff22b983	Revive SCARA's home offset (unimplemented)	2018-11-03 06:24:41 -05:00
Scott Lahteine	e4cf175163	Synchronize on M204, M205 (#12302) ... * Add parser.seen for multiple parameters * Fix M666, use !seen for report * Synchronize on M204, M205	2018-11-03 01:16:37 -05:00
Ludy	5ba6607181	Fix keypad-related compile error (#12306)	2018-11-02 22:29:32 -05:00
Scott Lahteine	3eb9838dca	Simplify TMC sanity-checks	2018-11-02 01:15:49 -05:00
Scott Lahteine	31c28d0dd2	Drop pgm_read_*_near and let headers choose (#12301) ... - Drop `pgm_read_*_near` and let headers choose. - Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional. - Add `process_subcommands_now` for SRAM-based commands.	2018-11-02 00:42:16 -05:00
Ludy	9f77df2590	Followup to menu refactor. TMC warnings, sanity. (#12288) ... - Followup fixes for menu refactor - Fix TMC sanity checks, unused var warnings	2018-11-01 16:13:33 -05:00
Scott Lahteine	42f8b6c530	Make M125 work with SDSUPPORT (#12289)	2018-11-01 15:03:45 -05:00
Scott Lahteine	44f2a82a56	Move axis_homed, axis_known_position to motion.*	2018-10-31 17:44:42 -05:00
Chris Pepper	66d44c72c3	Add fast binary file transfer to SD card option (#12249)	2018-10-30 19:44:12 -05:00
Scott Lahteine	3583e2b449	Followup to Menu Refactor (#12275)	2018-10-30 16:34:45 -05:00
TheLongAndOnly	5536228359	G34 Auto-align multi-stepper Z axis (#11302)	2018-10-29 14:01:36 -05:00
Scott Lahteine	2bf18950ab	Refactor LCD menus	2018-10-28 15:46:45 -05:00
MasterPIC	6fbc87301f	'G29 H' to set a centered square probe area (linear, bilinear) (#12242)	2018-10-27 20:30:21 -05:00
TheSFReader	a07ac6312f	G0 feedrate may be fixed or variable (#12172)	2018-10-25 10:35:16 -05:00
Ludy	a93e9e6e9b	Use preheat labels in place of PLA/ABS (#12194)	2018-10-23 15:38:17 -05:00
Scott Lahteine	b381cad399	Clean up trailing whitespace	2018-10-19 15:27:17 -05:00
TheSFReader	1fb9b299d4	Add M524 to abort SD printing (#12155)	2018-10-19 14:25:07 -05:00
Scott Lahteine	c6a5c74208	Add parentheses to SD macros	2018-10-19 13:52:57 -05:00
Marcio Teixeira	71e19baf69	Fix kill => disable_all_heaters => print_job_timer.stop (#12146) ... - Remove `print_job_timer.stop()` from `disable_all_heaters` - Call `print_job_timer.stop()` for relevant `disable_all_heaters()`. - Split up `kill()` for watchdog interrupt safety	2018-10-18 21:20:56 -05:00
InsanityAutomation	3ec3872730	Single Z raise value for all tool-changing / parking (#12090) ... * Universal tool-change Z lift * Add TOOLCHANGE_ZRAISE to example configs * Park/unpark changes to example configs * Implement DEBUG_DXC_MODE	2018-10-17 11:11:41 -05:00
Marcio Teixeira	f98f4ac7ea	Fix and improve EXTENSIBLE_UI (#12117) ... - Add methods to access print counter data - Clean up some inconsistent method names - Clear lcd status after filament change - Implement `lcd_reset_status` so it works like UltraLCD	2018-10-16 16:58:29 -05:00
Scott Lahteine	8bf596bd4c	RETRACT_ZLIFT => RETRACT_ZRAISE	2018-10-16 16:46:40 -05:00
Scott Lahteine	bf0c809ff2	Update M165 comment	2018-10-16 06:10:27 -05:00
AnHardt	9ac9649183	Mixer - update descriptions (#12108)	2018-10-16 06:09:02 -05:00
AnHardt	f56968ba0b	New Continuous Filament Mixer (#12098)	2018-10-16 03:38:57 -05:00
Scott Lahteine	84b59d58fb	Clean up whitespace	2018-10-16 02:02:20 -05:00
TheSFReader	af939c158a	Option for G0 to have a separate feedrate (#12089)	2018-10-16 01:49:51 -05:00
Scott Lahteine	951b25163e	Extend M217 with configurable park/raise (#12076)	2018-10-13 23:08:20 -05:00
Scott Lahteine	45e738876a	Add stepper MS3 support ... Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>	2018-10-11 01:10:11 -05:00
Giuliano Zaro	d43d4e4219	Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) ... Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>	2018-10-10 21:25:43 -05:00
Scott Lahteine	d556dc1865	Fix and improve EEPROM storage (#12054) ... * Clean up Temperature PID * Improve EEPROM read/write/validate * Group `SINGLENOZZLE` saved settings * Group planner saved settings * Group filament change saved settings * Group skew saved settings * Group `FWRETRACT` saved settings	2018-10-10 09:45:20 -05:00
Scott Lahteine	07d33849b0	Fix unused var warning, apply ENABLED	2018-10-09 21:31:28 -05:00
Scott Lahteine	ce82015d5f	Fix include in G80	2018-10-09 17:24:56 -05:00
Scott Lahteine	5f6aabccbe	Tweak M48 spacing	2018-10-08 19:11:25 -05:00
Marcio Teixeira	906a24fa81	Extensible user interface API (#11193)	2018-10-08 15:44:05 -05:00
InsanityAutomation	ee253991d4	Various fixups for single-nozzle filament swap (#12036)	2018-10-08 15:39:55 -05:00
Scott Lahteine	55e810d512	Fix G80 compilation	2018-10-08 13:11:36 -05:00
Scott Lahteine	7db0113b53	Improve E_AXIS_N macro	2018-10-07 18:22:05 -05:00
Sam Lane	f2ecf8d510	Add option to control Solenoids under PARKING_EXTRUDER (#12028)	2018-10-07 17:07:12 -05:00
InsanityAutomation	74cd6cb4fc	Single nozzle filament change (#11994)	2018-10-07 17:06:14 -05:00
Scott Lahteine	d6b0fbd771	Use uint8_t for all fan speeds (#12032)	2018-10-07 15:34:41 -05:00
teemuatlut	c447d75916	Add support for TMC2660 (#11998)	2018-10-06 17:18:10 -05:00
Scott Lahteine	52a37913c1	Extend and apply some corrections	2018-10-06 00:27:21 -05:00
thesfreader	e09c144674	Add CNC-like G-code options	2018-10-06 00:15:27 -05:00
Scott Lahteine	3e58b3a5d4	Followup to #11943	2018-10-03 02:55:10 -05:00
teemuatlut	c3229e1b34	Migrate to a new TMC library (#11943)	2018-10-03 02:48:49 -05:00
Eduardo José Tagle	d6955f25b2	Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988)	2018-10-03 00:47:27 -05:00
Scott Lahteine	11ac75edcb	Use PGM_P for PSTR pointers (#11977)	2018-09-30 23:44:33 -05:00
AnoNymous	b30ca652ae	Replace MIN# / MAX# with variadic MIN / MAX (#11960)	2018-09-30 04:59:14 -05:00
Thomas Moore	3286325044	Add TMC2130 sensorless probing	2018-09-29 18:54:14 -05:00
Giuliano Zaro	70e7a465d8	[2.0.x] Fix compile error (#11951) ... Fix compile error intruduced with M109 modification	2018-09-29 13:48:23 -05:00
Scott Lahteine	1410e79e7f	Ensure M109 handles autotemp	2018-09-29 02:12:06 -05:00
Scott Lahteine	e4389f7d23	Standard methods to wait for heating (#11949)	2018-09-29 01:44:47 -05:00
Victor Tseng	93839e2f73	Add option to enable/disable autoretract altogether (#11904)	2018-09-28 16:52:56 -05:00
Scott Lahteine	cb6454118c	Workaround for Pronterface M29	2018-09-27 16:27:02 -05:00
Scott Lahteine	cee34f7290	Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916)	2018-09-24 21:46:56 -04:00
InsanityAutomation	1104054d73	2.0 IDEX Independent z offset and other fixes (#11862) ... * Add Formbot Raptor board Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Add a second Z probe Z offset Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com> * Modify method to utilize live adjustment of hotend z offset Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems * Move config item and catchup other code to current method	2018-09-24 09:40:48 -05:00
Marcio Teixeira	c411e7eb0d	[2.0.x] Squelch compiler warnings seen with -Wall (#11889)	2018-09-23 12:00:34 -04:00
Scott Lahteine	e4ee607fc8	Fix Dual X FRS in M600 ... Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>	2018-09-18 21:23:33 -05:00
Scott Lahteine	bae8f82ba8	[2.0] Fix Mixing Extruder mixing factors (#11861)	2018-09-18 01:10:41 -05:00
Scott Lahteine	c5e5cc5e9f	Fix some trailing whitespace, macros	2018-09-17 17:30:04 -05:00
Roxy-3D	0780913848	IDEX Improvements (#11848)	2018-09-17 01:06:22 -05:00
Scott Lahteine	53bd0b55cb	Followup for 6 extruders	2018-09-16 23:57:50 -05:00
Scott Lahteine	1718eff54a	Code changes supporting up to 6 extruders	2018-09-16 22:32:53 -05:00
Thomas Moore	c437bb08f1	Overhaul of the planner (#11578) ... - Move FWRETRACT to the planner - Combine leveling, skew, etc. in a single modifier method - Have kinematic and non-kinematic moves call one planner method	2018-09-16 21:24:15 -05:00
Holger Müller	1a6f2b29b8	Add support for Triple-Z steppers/endstops	2018-09-16 00:35:58 -05:00
Sam Lane	4f883d5971	[2.0.x] Extruder-Distinct Linear Advance K Factors (#11789)	2018-09-10 22:37:32 -05:00
Sam Lane	1b6bc19427	Add external closed loop controller support	2018-09-10 03:17:17 -05:00
Alexander Amelkin	bc1ba998b2	[2.0.x] Fix undefined symbol 'g29_in_progress' (#11781)	2018-09-09 22:06:03 -05:00
InsanityAutomation	bad225dc04	Fix mesh leveling compile errors (#11768)	2018-09-09 04:19:48 -05:00
Scott Lahteine	2a61c9a939	Various fixups to configs, spacing, etc.	2018-09-06 06:44:31 -05:00
Scott Lahteine	d10f29ae2e	Pass segment length in G2-G3	2018-09-06 01:43:27 -05:00
Roxy-3D	d5379ee9d6	Fix search for white space in enqueued commands	2018-09-05 16:57:08 -05:00
Scott Lahteine	d1ceaf5550	[2.0.x] Followup to IDEX changes (#11707)	2018-09-03 23:15:31 -05:00
Scott Lahteine	8e18e48d49	Merge pull request #11610 from Freeviv/bugfix-2.0.x ... [2.0.x] Editable servo angles	2018-09-03 03:55:38 -05:00
Roxy-3D	7680b64aa6	IDEX clean up (#11690)	2018-09-02 10:18:59 -05:00
scott0122	607c1e58d9	Improve HOTEND OFFSET Z display precision to 3 (#11685)	2018-08-31 15:14:33 -05:00
Scott Lahteine	3e81745e81	Fix issues, make optional	2018-08-29 17:58:02 -05:00
Jan	aa80e448e2	Store servo angles in EEPROM	2018-08-29 17:58:02 -05:00
Scott Lahteine	2a2e8c314e	Suppress emergency parser G-code errors ... Co-Authored-By: srieche <srieche@users.noreply.github.com>	2018-08-29 01:04:55 -05:00
Scott Lahteine	d1c9517903	Followup to hotend_offset[Z] patch	2018-08-24 21:32:00 -05:00
Colin Gilgenbach	593d5375ea	Fix G28 resetting DUAL_NOZZLE_DUPLICATION_MODE (#11605) ... There's no reason for G28 to reset DUAL_NOZZLE_DUPLICATION_MODE, because it only affects the E stepper, unlike DUAL_X_CARRIAGE which affects the X steppers as well.	2018-08-21 23:42:55 -05:00
Scott Lahteine	8f0bbdcc9b	Fix up Max7219 orientations (#11596)	2018-08-21 02:06:18 -05:00
Scott Lahteine	56f1e17a25	[2.0.x] Max7219 cleanup, simplify, and extend (#11575)	2018-08-18 01:33:13 -05:00
Roxy-3D	aae4c67e5d	Max7219 Clean Up (#11563) ... Some of the Rotations did not do the right thing with setting and clearing pixels. I think it is correct now. But if not... It is much closer to being correct.	2018-08-15 21:22:28 -05:00
Scott Lahteine	a4b0148365	Easier to find 'static inline'	2018-08-13 23:55:33 -05:00
Roxy-3D	65c5227c29	Change M7219 I to setup Max7219 registers, but not do initialization pattern	2018-08-13 17:46:48 -05:00
Roxy-3D	60f1376798	Make M7219 I more robust and nice to look at ... Make M2719 initialize the Max7219 registers and then run the initialization pattern (if one is specified).	2018-08-13 16:59:25 -05:00
Roxy-3D	fd15b1495a	add I parameter to M42 to allow access to sensitive pins	2018-08-13 16:57:09 -05:00
Scott Lahteine	0af22549a6	Allow G33 to compile with no LCD	2018-08-11 22:32:09 -05:00
Giuliano	4237c3d9f8	[2.0.x] different bltouch init (#11135)	2018-07-26 05:04:09 -05:00
Scott Lahteine	e05e95cf97	Clean trailing whitespace	2018-07-25 18:49:47 -05:00
teemuatlut	fbcdf5eaeb	Simplify stepper driver per-axis selection	2018-07-25 02:47:43 -05:00
Scott Lahteine	4685c7d59f	Followup to M91x I patch	2018-07-24 18:30:28 -05:00
Roxy-3D	9660996cc3	Add Multi Unit Support for Max7219 to bugfix_2.0.0 (#11285) ... * Add Multi Unit Support for Max7219 to bugfix_2.0.0 * Apply multi-MAX7219 to example configs * Tweak some spacing, macros	2018-07-19 13:56:47 -05:00
Giuliano	aed1d17a2d	Initialize default units (#11295) ... When `INCH_MODE_SUPPORT` is enabled no default unit is set. This fixes it.	2018-07-17 19:37:30 -05:00
Scott Lahteine	fd8a76493b	Unify M91x parameter I meaning, simplify reports (#11249)	2018-07-12 22:31:51 -05:00
etagle	1367df2875	Replace double with float, optimize calculation	2018-07-04 22:28:56 -05:00
Scott Lahteine	d960d448fa	Optimize calculations with LROUND	2018-07-04 22:22:28 -05:00
Scott Lahteine	9c058091e9	No M914 or SGT set for non-sensorless axes	2018-07-03 20:09:13 -05:00
Scott Lahteine	1a0f4dedad	Fix and improve POWER_LOSS_RECOVERY (#11187)	2018-07-02 23:21:28 -05:00
Scott Lahteine	e0ab8acf19	Add "Marlin Dev Mode" option	2018-07-02 22:55:21 -05:00
Scott Lahteine	c51e27d11d	Do a hard kill for failed homing moves (#11161)	2018-06-30 21:54:07 -05:00
Scott Lahteine	90ba77ea0f	Lose the old HOMEAXIS macro	2018-06-30 18:13:13 -05:00
Scott Lahteine	8eaac0dab3	Add delta feedrate scaling (#11153)	2018-06-30 13:44:27 -05:00
Scott Lahteine	05518d6add	Add newline to end of file	2018-06-29 23:54:16 -05:00
Scott Lahteine	a431013eb7	Fix G33 compile warning	2018-06-29 23:17:51 -05:00
Colin Gilgenbach	0fff79c24b	Fixes G29_with_retry behavior (#11045) ... * Fix G29 (ABL) retry behavior	2018-06-29 20:48:11 -05:00
Scott Lahteine	a264030526	Fix "G29" G29_MAX_RETRIES handling	2018-06-29 18:46:31 -05:00
Andy Shaw	3b3029c4bf	Make max_e_jerk an array to reduce CPU usage (#11118)	2018-06-26 22:38:31 -04:00
Scott Lahteine	229b26b02c	Clear LED matrix without startup test	2018-06-26 18:54:01 -05:00
Scott Lahteine	a2a30ff0ac	Use Tool 0 for Dual X Axis G29 ... See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325	2018-06-20 01:32:23 -05:00
Scott Lahteine	e366d55bc2	Don't reset stepper timeout for all g-codes	2018-06-19 21:48:28 -05:00
Roxy-3D	7c54c4ed27	Tiny improvement to M7219 ... The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized. And... it also allows the user to see the initialization pattern.	2018-06-19 14:46:30 -05:00
Scott Lahteine	d4795e5b8e	[2.0.x] Tweaks and additions for MAX7219 (#11034)	2018-06-18 22:04:03 -05:00
Scott Lahteine	e23677a7b2	Update some G-code comments	2018-06-18 16:13:01 -05:00
Giuliano	cce0523a95	[2.0.x] reset bltouch on home (#11018) ... Added reset bltouch instead. This ensure properly stow even when in error.	2018-06-13 14:09:13 -05:00
Karl Andersson	e0276d2f32	Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006)	2018-06-12 18:38:00 -05:00
Scott Lahteine	9d04f47d98	Improvements for junction_deviation_mm ... - Drop `max_jerk` with `JUNCTION_DEVIATION` - Add `max_e_jerk_factor` for use by `LIN_ADVANCE` - Recalculate `max_e_jerk_factor` when `junction_deviation_mm` changes - Fix LCD editing of `junction_deviation_mm`	2018-06-11 22:05:16 -05:00
Scott Lahteine	f2c3b0d476	Use bit flags for homed/known	2018-06-11 22:05:16 -05:00
Scott Lahteine	4832be52d7	Followup to G29 O	2018-06-11 21:57:26 -05:00
Robert Mendon	86170e6a66	[2.0.x] Add O (optional) flag to G28/G29 (#10913)	2018-06-11 21:51:48 -05:00
Scott Lahteine	117fd007a9	Followup to pin error change	2018-06-10 19:28:45 -05:00
Scott Lahteine	20a5db03bb	Junction Deviation limit (0.01 to 0.3)	2018-06-10 18:22:08 -05:00
Scott Lahteine	a2f521d34b	Add Junction Deviation mm runtime setting (#10990)	2018-06-10 18:02:54 -05:00
Scott Lahteine	590ce1c33e	Fix serial debug ouput	2018-06-10 17:54:22 -05:00
Scott Lahteine	968a5d2e63	Protected pin err for M226	2018-06-10 17:45:47 -05:00
Giuliano	f1cdfe3dfd	[2.0.x] stow bltouch before start homing (#10987)	2018-06-10 16:27:14 -05:00
etagle	99af086cea	Add hidden Serial overflow debug options	2018-06-10 04:25:42 -05:00
Scott Lahteine	3f2a062a57	Fix M914 value range (-64...+63) ... Fix #10896	2018-05-29 12:02:15 -05:00
Eduardo José Tagle	6f330f397e	[2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844)	2018-05-25 23:32:37 -05:00
Scott Lahteine	645df23eb0	Fix warning with FASTER_GCODE_PARSER disabled	2018-05-25 06:45:42 -05:00
Scott Lahteine	a94506ada0	Fix K8400 Y min pos, M118 comment	2018-05-24 08:21:16 -05:00
Scott Lahteine	230ae6a143	Default G30 to engage / disengage	2018-05-23 16:57:23 -05:00
etagle	a11eb50a3e	Refactor and optimize Stepper/Planner ... Better encapsulation and considerably reduce stepper jitter	2018-05-20 06:23:58 -05:00
Scott Lahteine	83d42f33e1	Add HAS_HOTEND_OFFSET_Z conditional	2018-05-19 17:05:15 -05:00
GMagician	3c76bda2d8	Fix switching extruder ... `DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.	2018-05-19 17:05:15 -05:00
Scott Lahteine	c173a31060	Fix some compile warnings	2018-05-19 16:54:48 -05:00
Scott Lahteine	50270b53a0	Clear up some more compile warnings	2018-05-17 18:40:49 -05:00
Scott Lahteine	eb2eb72720	Modify UBL mesh_is_valid and use in leveling_is_valid (#10746)	2018-05-14 22:36:03 -05:00
Scott Lahteine	35258dd50b	Consistent heating status and status reset ... Fix #10699	2018-05-13 17:18:19 -05:00
Scott Lahteine	08e36e264e	Apply _AXIS macro	2018-05-13 06:51:01 -05:00
Scott Lahteine	99ecdf59af	Smarter MIN, MAX, ABS macros ... Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`. Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-13 04:52:56 -05:00
Scott Lahteine	8f8c6a9bc4	Move get_axis_position_mm to Planner (#10718)	2018-05-12 09:59:11 -05:00
Scott Lahteine	f5aaa2d6c0	Fix some compiler warnings	2018-05-12 05:28:12 -05:00
Scott Lahteine	625035a9ce	Fix M301 access to lpq_len (#10714) ... Co-Authored-By: Zwaubel	2018-05-12 02:13:40 -05:00
Scott Lahteine	306f0f2135	Move Stepper::synchronize to Planner (#10713) ... Co-Authored-By: ejtagle <ejtagle@hotmail.com>	2018-05-12 01:38:02 -05:00
ManuelMcLure	8679f671ed	Remove dependency on PI. (#10701)	2018-05-11 17:55:56 -05:00
Scott Lahteine	6671c064cd	Use arc moves for G26 if enabled (#10696) ... Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>	2018-05-11 02:15:14 -05:00
Scott Lahteine	c43235dd39	Remove non-special comments	2018-05-11 00:36:04 -05:00
ManuelMcLure	613a3be167	Remove hidden dependencies on destination. Fixes #10686. (#10691)	2018-05-11 00:30:51 -05:00
Scott Lahteine	b76344c080	More Trinamic cleanup	2018-05-10 00:12:10 -05:00
Giuliano	44f3a6dc3b	[2.0.x] Add missing axes to M911, M912 (#10668)	2018-05-09 17:58:11 -05:00
Scott Lahteine	19f189b4e5	Add UBL support for G2/G3 and G5 (#10648)	2018-05-08 11:10:45 -05:00
Scott Lahteine	bfe223e120	Adjust usage of stepper.synchronize	2018-05-06 01:24:14 -05:00
Scott Lahteine	af1950a63e	Improve sync of stepper positions	2018-05-06 01:24:14 -05:00
Scott Lahteine	d7b699ec34	Fewer includes of vector_3.h	2018-05-01 07:05:18 -05:00
Scott Lahteine	05fca752d6	Clean up autostart handling	2018-05-01 01:35:57 -05:00
Scott Lahteine	05c33833e7	[2.0.x] Add NO_LCD_MENUS option (#10582)	2018-04-30 21:16:31 -05:00
Scott Lahteine	59fda986ea	Allow Z_AFTER_PROBING to be 0	2018-04-30 03:25:47 -05:00
Scott Lahteine	9e0d99c0c6	Round all floats in string conversion functions (#10566)	2018-04-29 00:51:36 -05:00
Scott Lahteine	cd08f01bb4	Fix M421 comment in gcode.h	2018-04-28 11:16:52 -05:00
Scott Lahteine	8db7fb226a	Fix M420 C for UBL	2018-04-28 08:14:20 -05:00
Marcio Teixeira	724e9f56c8	Removed "const" to match parser. (#10548)	2018-04-27 17:48:52 -05:00
Giuliano	2e1939e85c	[2.0.x] report error on unsupported commands (#10553) ... Raise an error when an unknown/unsupported G/M command is requires. This will address #10546	2018-04-27 17:40:27 -05:00
Scott Lahteine	a51ba6e3f6	Fix ABL grid bounds test for Delta/SCARA ... Addressing #10538	2018-04-27 02:23:10 -05:00
Scott Lahteine	63e0b36f8b	Fix G29_RECOVER_COMMANDS typo	2018-04-27 02:23:10 -05:00
Scott Lahteine	eef0248a1c	Add M420 C to adjust the whole mesh (#10522)	2018-04-25 06:43:45 -05:00
Marcio Teixeira	02a711c4d6	[2.0.x] Fix crash upon repeated calls to process_subcommands_now_P (#10509)	2018-04-24 13:44:22 -05:00
Scott Lahteine	f06c3c38b9	Fix M0_M1 with no LCD	2018-04-24 09:22:05 -05:00
Scott Lahteine	f423e54f77	Strip trailing spaces	2018-04-23 18:00:43 -05:00
Scott Lahteine	cb46cb8480	Add HAS_HEATED_BED conditional (#10495)	2018-04-23 17:13:01 -05:00
Scott Lahteine	1c3d49afe0	Fix G28 with Z_AFTER_PROBING ... Fix #10476	2018-04-22 01:23:26 -05:00
Scott Lahteine	023385ca59	Merge pull request #10479 from thinkyhead/bf2_creality_power_loss_resume ... [2.0.x] Creality3D Power-Loss Recovery	2018-04-22 00:17:44 -05:00
Scott Lahteine	3396671011	[2.0.x] Reset LCD status to fallbacks (#10470) ... * Remove obsolete strings * Tweak some static consts * Reset LCD status to fallbacks	2018-04-22 00:16:30 -05:00
Scott Lahteine	11ab017dd0	Creality3D Power-Loss Recovery	2018-04-21 21:56:50 -05:00
Scott Lahteine	7dcd0a1cff	Add R parameter to G28 to specify pre-raise	2018-04-21 19:07:48 -05:00
Scott Lahteine	a90cbc6339	[2.0.x] Wait for bed heaters between probing (#10472)	2018-04-21 15:43:21 -05:00
Scott Lahteine	d8a8eec6ea	Add THERMAL_PROTECTION capability ... Based on #10465 In response to `M115` the firmware reports if Thermal Protection is enabled (1) or not (0). This information can be used by software such as OctoPrint (more precisely the Printer Safety Check plugin) to warn users when Thermal Protection is not enabled in the firmware. Co-Authored-By: andrivet <sebastien@advtools.com>	2018-04-20 16:50:50 -05:00
Scott Lahteine	65a6a86d19	Don't report point 0 in MBL G29	2018-04-20 13:12:50 -05:00
Marcio Teixeira	5cc7916e69	Add G29_RETRY_AND_RECOVER feature ... - Add an option to retry G29, optionally executing a G-code procedure after each failed probe.	2018-04-19 19:45:53 -05:00
Scott Lahteine	78ea4871f9	Fix up enqueue now functions ... …and apply to MALYAN_LCD.	2018-04-19 19:45:53 -05:00
Scott Lahteine	df2f24617b	Use 0 as the bed position (not Z_MIN_POS)	2018-04-17 20:32:56 -05:00
Scott Lahteine	52c024e260	M221 with no parameters report flow	2018-04-17 16:06:25 -05:00
Scott Lahteine	0746aff595	Improve UBL mesh report. Add M420 T, M421 N	2018-04-17 15:52:56 -05:00
Scott Lahteine	99282a46e9	Make sure ABL (manual) starts close to the bed	2018-04-13 20:19:30 -05:00
Scott Lahteine	3c5c6d478a	Prettify process_parsed_command	2018-04-13 00:23:11 -05:00
Scott Lahteine	bb7064cc30	Tweak MBL move to bed code	2018-04-12 22:43:02 -05:00
Scott Lahteine	daa712455b	Make sure MBL starts close to the bed ... Fix #10390	2018-04-12 19:36:37 -05:00
Scott Lahteine	4c8751727a	Fix M118 parameter handling ... Fix #10388	2018-04-12 19:10:04 -05:00
Luc Van Daele	646aa20b43	Overhaul of G33 Delta Calibration (#8822)	2018-04-11 21:14:48 -05:00
Luc Van Daele	ac2e0afb62	Low Point for delta calibration (#10363)	2018-04-11 18:59:46 -05:00
Sean	2d9b0a66fe	Add Filament Change accelerations	2018-04-09 23:57:27 -05:00
Scott Lahteine	8b8ad14178	Add Z_PROBE_LOW_POINT to prevent damage	2018-04-09 17:23:03 -05:00
Scott Lahteine	cea398849e	Tweak to gcode_line_error/return	2018-04-07 21:25:49 -05:00
Scott Lahteine	e8e60263c8	Scale feedrate (mm/s to deg/s) for SCARA	2018-04-06 19:47:48 -05:00
Marcio Teixeira	8bc93c6f2b	Improve heating/cooling LCD messages (#10293)	2018-04-04 18:29:27 -05:00
Scott Lahteine	241996d5d6	Merge pull request #10257 from thinkyhead/bf2_tool_change_debug	2018-04-02 19:33:45 -05:00
Scott Lahteine	adcb87f0db	Z Endstop Servo => Z Probe Servo	2018-04-01 23:54:21 -05:00
Scott Lahteine	1a75165f35	For set_z_fade_height use set_bed_leveling_enabled	2018-03-31 22:43:05 -05:00
Scott Lahteine	55e9b85ad6	Clear the "Wait for user" message set by M0/M1 ... See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936	2018-03-29 18:38:12 -05:00
AnHardt	c1f58a238d	No delay in sensorless quick homing (#10254)	2018-03-29 16:10:20 -05:00
Scott Lahteine	1be955e52a	Alert users about low Z jerk values	2018-03-28 23:08:33 -05:00
Scott Lahteine	9e4c037cef	Wait before turning off PRINTER_EVENT_LEDS at print end (#10248)	2018-03-28 22:59:28 -05:00
Scott Lahteine	7b8bb2519e	Fix gcode_line_error call ... Followup to 3007eee	2018-03-28 20:29:41 -05:00
Scott Lahteine	aa20b3ef7c	Fix linear/3-point manual leveling buffer overrun ... Fixes #10137	2018-03-28 18:41:22 -05:00
Scott Lahteine	38378cd0e8	M218 with DELTA needs planner.h ... Fix #10232	2018-03-28 17:05:14 -05:00
Scott Lahteine	3007eee22e	Require a checksum when writing to SD ... From #10204 by @adriancuzman	2018-03-28 17:05:13 -05:00
Bob-the-Kuhn	9656a82609	Fix G53/CNC_COORDINATE_SYSTEMS compilation, Travis testing (#10227)	2018-03-28 14:14:39 -04:00
Rob Power	d1f14202a9	[2.0.x] NANODLP_Z_SYNC requires linear axes (#10240)	2018-03-28 14:03:34 -04:00
Scott Lahteine	1cb810ff1c	[2.0.x] Automatically reset stepper timeout (#10179) ... * Automatically reset stepper timeout in manage_inactivity Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner. * blocks_queued => has_blocks_queued	2018-03-21 19:30:06 -05:00
Scott Lahteine	045ee28c50	Tweaks to M915	2018-03-21 05:15:25 -05:00
Scott Lahteine	ff304d3767	Allow G53 to go back to native space	2018-03-21 01:38:25 -05:00
Scott Lahteine	bc45fb6b13	Tweak use of move_z_after_probing	2018-03-21 01:25:08 -05:00
Scott Lahteine	c352954882	Allow no raise after run_z_probe in probe_pt	2018-03-21 01:24:51 -05:00
Scott Lahteine	ae39fbd646	Also suppress keepalive with suspend_auto_report	2018-03-21 00:29:09 -05:00
Scott Lahteine	a46bac3100	Add 'I' parameter to M906/M913/M914; 'T' to M906/M913	2018-03-19 22:05:16 -05:00
Scott Lahteine	cfc13ed7f3	Quiet M906/M913/M914 with axes. Patch for DISTINCT_E_FACTORS.	2018-03-19 22:05:16 -05:00
Scott Lahteine	48d7036874	Consolidate smart stepper driver initialization	2018-03-19 22:05:16 -05:00
Scott Lahteine	dd2949922b	Consolidate 3-point leveling point options	2018-03-19 04:12:20 -05:00
Scott Lahteine	8922b56b58	Fix some spelingz	2018-03-16 01:25:41 -05:00
Scott Lahteine	a6feb58837	Delta support for multiple hotends with offsets (#10118)	2018-03-16 00:46:42 -05:00
TheSFReader	2e43438e0c	Add C parameter to M27 to include the long filename ... In answer to #10001 Add an option to retrieve the currently open file name (long filename if possible).	2018-03-15 23:06:18 -05:00
Scott Lahteine	14c03cb6f4	[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) ... Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.	2018-03-13 01:15:22 -05:00
Scott Lahteine	5b45aab262	M218: report with no parameters	2018-03-12 08:14:35 -05:00
Scott Lahteine	28f1276286	[2.0.x] Add Z_AFTER_PROBING option (#10058) ... Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.	2018-03-11 13:07:55 -05:00
Scott Lahteine	bae1cb859c	Patch flush_and_request_resend for 1.1.x parity	2018-03-11 07:36:00 -05:00
Bob-the-Kuhn	0d8c15c01f	restore PR 9661 files & V1 fix	2018-03-10 22:46:32 -06:00
Scott Lahteine	751785fc97	Followup to recent patches ... - `M666` is static, not inline - Disambiguate some stepper macros	2018-03-10 21:41:17 -06:00
Scott Lahteine	f003173752	Fixup M666 ... Followup to d6df032	2018-03-10 19:52:30 -06:00
Bob-the-Kuhn	bf59a4a6df	Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h"	2018-03-10 17:22:20 -06:00
Sebastianv650	fd1d590726	[2.0.x] Silence M204 (#10037) ... `M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.	2018-03-10 07:16:55 -06:00
Scott Lahteine	d6df0322c2	Update M666 for XYZ dual endstops	2018-03-10 06:57:31 -06:00
Scott Lahteine	fbc41c0e98	Update Marlin G-code summary	2018-03-10 06:57:31 -06:00
Scott Lahteine	ddce486360	Merge pull request #10032 from thinkyhead/bf2_unknown_z_no_raise ... [2.0.x] Add UNKNOWN_Z_NO_RAISE to prevent Z grinding	2018-03-10 00:57:30 -06:00
Scott Lahteine	419d12ca1b	Add UNKNOWN_Z_NO_RAISE option ... With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.	2018-03-10 00:17:34 -06:00
Bob-the-Kuhn	914bb80bde	removed SDSS init ... added device & comm drivers for shared SPI LCDs mistyped some updates in ultralcd_impl_DOGM.h remove unwanted changes in onfiguration.h still can't type Update HAL_LCD_class_defines.h include USB mass storage & misc	2018-03-09 23:06:11 -06:00
Scott Lahteine	49ca67202f	Patch configuration_store for extra serial port ... Fix #9948	2018-03-09 07:42:27 -06:00
Scott Lahteine	3c2bfa5e53	Update powersupply_on in power_on/off (#10015) ... Fix #10004	2018-03-08 18:56:47 -06:00
Scott Lahteine	42608b1925	Init old_red to 127 to ensure initial change ... Fix #10012	2018-03-08 18:28:33 -06:00
Scott Lahteine	ffbf63e6af	Add HAS_TEMP_SENSOR conditional	2018-03-07 01:53:50 -06:00
Scott Lahteine	920d92aa46	Merge pull request #9974 from thinkyhead/bf2_tmc_util_progmem ... [2.0.x] Move tmc_util.* extended_axis_codes to PROGMEM	2018-03-07 00:16:50 -06:00
Scott Lahteine	b198b49d15	Followup to AUTO_REPORT_SD_STATUS ... Followup to #9832	2018-03-07 00:13:42 -06:00
Scott Lahteine	2057177184	Make enums into implicit char	2018-03-06 23:39:56 -06:00
Scott Lahteine	e28e3bb532	Move extended_axis_codes to PROGMEM	2018-03-06 22:21:24 -06:00
Scott Lahteine	bf9fc8ac0e	M851 - report only without parameters	2018-03-05 02:11:50 -06:00
Scott Lahteine	61620cbd15	Tweak M211	2018-03-02 02:20:40 -06:00
Scott Lahteine	6e08ddce6e	Correct M401 / M402 description	2018-03-01 19:10:36 -06:00
Scott Lahteine	88b6a15b47	Update M900 verbiage	2018-03-01 15:11:31 -06:00
Scott Lahteine	91db7930dc	Drop SCARA_FEEDRATE_SCALING ... The updated planner takes the length of the move, so this pre-calculation is no longer needed.	2018-03-01 04:30:41 -06:00
Scott Lahteine	118899357d	Add sanity checks to Linear Advance 1.5 (#9873)	2018-03-01 02:10:43 -06:00
Scott Lahteine	a446433c87	Fix SENSORLESS_HOMING for Core Kinematics (#9868)	2018-03-01 01:37:31 -06:00
TheSFReader	eb079959fb	Report sd card progress [FR] #9751 (#9832) ... * SD Status auto-report feature Feature Request #9751	2018-02-26 15:38:27 -06:00
Scott Lahteine	3f89bbeab5	Drop a conditional only used once	2018-02-24 16:35:31 -06:00
Scott Lahteine	b2cf253a13	Add RESTORE_LEVELING_AFTER_G28 option	2018-02-23 13:38:54 -06:00
Scott Lahteine	65519263f4	Fix broken LEVEL_BED_CORNERS ... Fix #8805	2018-02-23 09:13:34 -06:00
Scott Lahteine	2bd252b501	[2.0.x] LIN_ADVANCE v1.5 (#9712)	2018-02-23 00:53:29 -06:00
Scott Lahteine	1d7f5be0ff	quick_home_xy sensorless homing	2018-02-20 20:52:48 -06:00
Scott Lahteine	d4e4fe40e0	Add SENSORLESS_HOMING delay to quick_home_xy ... Fix #9471	2018-02-19 10:12:16 -06:00
Scott Lahteine	3af988a7f3	Add sensorless homing delay to home_z_safely ... Based on #9705	2018-02-18 19:28:40 -06:00
Scott Lahteine	8ffa0b24a4	Strip excess G28 debug logging	2018-02-18 01:11:41 -06:00
Kevin	9019ea0fce	Option to force X or Y to home first when homing the other axis	2018-02-18 01:11:41 -06:00
Scott Lahteine	241e55ef3b	Apply SERIAL_FLUSH macro	2018-02-16 17:32:12 -06:00
Scott Lahteine	6a70a4fbb3	Fix G26 circles (#9627) ... Easier to configure. Catch an odd divisor.	2018-02-15 22:11:26 -06:00
Roxy-3D	c78e1c0f23	Fix G26 Circles... (#9641) ... * Fix G26 Circles...	2018-02-15 11:15:15 -06:00
AnHardt	133b38b93b	Complete M48 description (#9631)	2018-02-14 05:17:58 -06:00
Scott Lahteine	8d71ad37cb	flush comment to match 1.1.x	2018-02-14 02:56:18 -06:00
Scott Lahteine	377108619b	Fix plan_arc clockwise (G2) ... Fix #9482	2018-02-11 03:34:25 -06:00