bissen21/Marlin_Firmware
1
0 Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x

Browse Source
This commit is contained in:
Bob-the-Kuhn committed 2019-04-17 15:34:29 -05:00
2 parents 57aaa9110b e1acc09c6e
commit 520585c5ed
208 files changed
+1900 -418
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

Marlin/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
Marlin/Configuration_adv.h
+11
View File
@@ -905,6 +905,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp
+95 -176
View File
@@ -21,213 +21,132 @@
*/
#ifdef ARDUINO_ARCH_ESP32
#include "../../inc/MarlinConfig.h"
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(WIFISUPPORT)
#include "WebSocketSerial.h"
extern WebSocketSerial webSocketSerial;
#include "wifi.h"
#include <AsyncTCP.h>
#include <ESPAsyncWebServer.h>
struct ring_buffer_r {
unsigned char buffer[RX_BUFFER_SIZE];
volatile ring_buffer_pos_t head, tail;
};
WebSocketSerial webSocketSerial;
AsyncWebSocket ws("/ws"); // TODO Move inside the class.
struct ring_buffer_t {
unsigned char buffer[256];
volatile uint8_t head, tail;
};
// RingBuffer impl
ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
#define NEXT_INDEX(I, SIZE) ((I + 1) & (ring_buffer_pos_t)(SIZE - 1))
static bool _written;
RingBuffer::RingBuffer(ring_buffer_pos_t size)
: data(new uint8_t[size]),
read_index(0),
write_index(0),
size(size)
{}
#if ENABLED(EMERGENCY_PARSER)
static EmergencyParser::State emergency_state; // = EP_RESET
#endif
RingBuffer::~RingBuffer() { delete[] data; }
AsyncWebSocket ws("/ws"); // access at ws://[esp ip]/ws
ring_buffer_pos_t RingBuffer::write(const uint8_t c) {
const ring_buffer_pos_t n = NEXT_INDEX(write_index, size);
FORCE_INLINE int next_rx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1); }
FORCE_INLINE int next_tx_index(const int i) { return (ring_buffer_pos_t)(i + 1) & (ring_buffer_pos_t)(TX_BUFFER_SIZE - 1); }
static void addToBuffer(uint8_t * const data, const size_t len) {
for (size_t i = 0; i < len; i++) {
ring_buffer_pos_t h = rx_buffer.head;
const ring_buffer_pos_t t = rx_buffer.tail, n = next_rx_index(h);
if (n != t) { rx_buffer.buffer[h] = data[i]; h = n; }
// TODO: buffer is full, handle?
rx_buffer.head = h;
if (n != read_index) {
this->data[write_index] = c;
write_index = n;
return 1;
}
// TODO: buffer is full, handle?
return 0;
}
// Handle WebSocket event
static void onEvent(AsyncWebSocket * server, AsyncWebSocketClient * client, AwsEventType type, void * arg, uint8_t *data, size_t len) {
switch (type) {
case WS_EVT_CONNECT: client->ping(); break; // client connected
case WS_EVT_DISCONNECT: // client disconnected
case WS_EVT_ERROR: // error was received from the other end
case WS_EVT_PONG: break; // pong message was received (in response to a ping request maybe)
case WS_EVT_DATA: { // data packet
AwsFrameInfo * info = (AwsFrameInfo*)arg;
if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT)
addToBuffer(data, len);
}
ring_buffer_pos_t RingBuffer::write(const uint8_t *buffer, ring_buffer_pos_t size) {
ring_buffer_pos_t written = 0;
for (ring_buffer_pos_t i = 0; i < size; i++) {
written += write(buffer[i]);
}
return written;
}
// Public Methods
int RingBuffer::available(void) {
return (size - read_index + write_index) & (size - 1);
}
int RingBuffer::peek(void) {
return available() ? data[read_index] : -1;
}
int RingBuffer::read(void) {
if (available()) {
const int ret = data[read_index];
read_index = NEXT_INDEX(read_index, size);
return ret;
}
return -1;
}
ring_buffer_pos_t RingBuffer::read(uint8_t *buffer) {
ring_buffer_pos_t len = available();
for(ring_buffer_pos_t i = 0; read_index != write_index; i++) {
buffer[i] = data[read_index];
read_index = NEXT_INDEX(read_index, size);
}
return len;
}
void RingBuffer::flush(void) { read_index = write_index; }
// WebSocketSerial impl
WebSocketSerial::WebSocketSerial()
: rx_buffer(RingBuffer(RX_BUFFER_SIZE)),
tx_buffer(RingBuffer(TX_BUFFER_SIZE))
{}
void WebSocketSerial::begin(const long baud_setting) {
ws.onEvent(onEvent);
server.addHandler(&ws); // attach AsyncWebSocket
ws.onEvent([this](AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
switch (type) {
case WS_EVT_CONNECT: client->ping(); break; // client connected
case WS_EVT_DISCONNECT: // client disconnected
case WS_EVT_ERROR: // error was received from the other end
case WS_EVT_PONG: break; // pong message was received (in response to a ping request maybe)
case WS_EVT_DATA: { // data packet
AwsFrameInfo * info = (AwsFrameInfo*)arg;
if (info->opcode == WS_TEXT || info->message_opcode == WS_TEXT)
this->rx_buffer.write(data, len);
}
}
});
server.addHandler(&ws);
}
void WebSocketSerial::end() { }
int WebSocketSerial::peek(void) { return rx_buffer.peek(); }
int WebSocketSerial::read(void) { return rx_buffer.read(); }
int WebSocketSerial::available(void) { return rx_buffer.available(); }
void WebSocketSerial::flush(void) { rx_buffer.flush(); }
int WebSocketSerial::peek(void) {
const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
return v;
}
size_t WebSocketSerial::write(const uint8_t c) {
size_t ret = tx_buffer.write(c);
int WebSocketSerial::read(void) {
const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
if (h == t) return -1; // Nothing to read? Return now
const int v = rx_buffer.buffer[t];
rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1); // Advance tail
return v;
}
bool WebSocketSerial::available(void) {
const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
}
void WebSocketSerial::flush(void) {
ws.textAll("flush");
rx_buffer.tail = rx_buffer.head;
}
#if TX_BUFFER_SIZE
void WebSocketSerial::write(const uint8_t c) {
_written = true;
const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
// Store new char. head is always safe to move
tx_buffer.buffer[tx_buffer.head] = c;
tx_buffer.head = i;
if (c == '\n') {
ws.textAll(tx_buffer.buffer, tx_buffer.head);
tx_buffer.head = 0;
}
if (ret && c == '\n') {
uint8_t tmp[TX_BUFFER_SIZE];
ring_buffer_pos_t size = tx_buffer.read(tmp);
ws.textAll(tmp, size);
}
void WebSocketSerial::flushTx(void) {
ws.textAll("flushTx");
if (!_written) return;
}
#else
//void WebSocketSerial::write(const uint8_t c) { _written = true; }
//void WebSocketSerial::flushTx(void) { if (!_written) return; }
#endif
/**
* Imports from print.h
*/
void WebSocketSerial::print(char c, int base) { print((long)c, base); }
void WebSocketSerial::print(unsigned char b, int base) { print((unsigned long)b, base); }
void WebSocketSerial::print(int n, int base) { print((long)n, base); }
void WebSocketSerial::print(unsigned int n, int base) { print((unsigned long)n, base); }
void WebSocketSerial::print(long n, int base) {
if (base == 0)
write(n);
else if (base == 10) {
if (n < 0) { print('-'); n = -n; }
printNumber(n, 10);
}
else
printNumber(n, base);
return ret;
}
void WebSocketSerial::print(unsigned long n, int base) {
if (base == 0) write(n); else printNumber(n, base);
size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
size_t written = 0;
for(size_t i = 0; i < size; i++) {
written += write(buffer[i]);
}
return written;
}
void WebSocketSerial::print(double n, int digits) { printFloat(n, digits); }
void WebSocketSerial::println(void) { print('\r'); print('\n'); }
void WebSocketSerial::println(const String& s) { print(s); println(); }
void WebSocketSerial::println(const char c[]) { print(c); println(); }
void WebSocketSerial::println(char c, int base) { print(c, base); println(); }
void WebSocketSerial::println(unsigned char b, int base) { print(b, base); println(); }
void WebSocketSerial::println(int n, int base) { print(n, base); println(); }
void WebSocketSerial::println(unsigned int n, int base) { print(n, base); println(); }
void WebSocketSerial::println(long n, int base) { print(n, base); println(); }
void WebSocketSerial::println(unsigned long n, int base) { print(n, base); println(); }
void WebSocketSerial::println(double n, int digits) { print(n, digits); println(); }
// Private Methods
void WebSocketSerial::printNumber(unsigned long n, uint8_t base) {
if (n) {
unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
int8_t i = 0;
while (n) {
buf[i++] = n % base;
n /= base;
}
while (i--)
print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
}
else
print('0');
}
void WebSocketSerial::printFloat(double number, uint8_t digits) {
// Handle negative numbers
if (number < 0.0) { print('-'); number = -number; }
// Round correctly so that print(1.999, 2) prints as "2.00"
// Use a lookup table for performance
constexpr double rounds[] = { 0.5, 0.05, 0.005, 0.0005, 0.00005, 0.000005, 0.0000005, 0.00000005 };
number += rounds[digits];
//number += pow(10, -(digits + 1)); // slower single-line equivalent
// Extract the integer part of the number and print it
unsigned long int_part = (unsigned long)number;
print(int_part);
// Print the decimal point, but only if there are digits beyond
double remainder = number - (double)int_part;
if (digits) {
print('.');
// Extract digits from the remainder one at a time
while (digits--) {
remainder *= 10.0;
const int toPrint = int(remainder);
print(toPrint);
remainder -= toPrint;
}
}
void WebSocketSerial::flushTX(void) {
// No need to do anything as there's no benefit to sending partial lines over the websocket connection.
}
#endif // WIFISUPPORT
Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h
+37 -52
View File
@@ -23,12 +23,7 @@
#include "../../inc/MarlinConfig.h"
#include <WString.h>
#define DEC 10
#define HEX 16
#define OCT 8
#define BIN 2
#include "Stream.h"
#ifndef RX_BUFFER_SIZE
#define RX_BUFFER_SIZE 128
@@ -40,60 +35,50 @@
#error "TX_BUFFER_SIZE is required for the WebSocket."
#endif
#if RX_BUFFER_SIZE > 256
typedef uint16_t ring_buffer_pos_t;
#else
typedef uint8_t ring_buffer_pos_t;
#endif
typedef uint16_t ring_buffer_pos_t;
class RingBuffer {
uint8_t *data;
ring_buffer_pos_t size, read_index, write_index;
class WebSocketSerial {
public:
WebSocketSerial() {};
static void begin(const long);
static void end();
static int peek(void);
static int read(void);
static void flush(void);
static void flushTx(void);
static bool available(void);
static void write(const uint8_t c);
RingBuffer(ring_buffer_pos_t size);
~RingBuffer();
int available(void);
int peek(void);
int read(void);
ring_buffer_pos_t read(uint8_t *buffer);
void flush(void);
ring_buffer_pos_t write(const uint8_t c);
ring_buffer_pos_t write(const uint8_t* buffer, ring_buffer_pos_t size);
};
class WebSocketSerial: public Stream {
RingBuffer rx_buffer;
RingBuffer tx_buffer;
public:
WebSocketSerial();
void begin(const long);
void end();
int available(void);
int peek(void);
int read(void);
void flush(void);
void flushTX(void);
size_t write(const uint8_t c);
size_t write(const uint8_t* buffer, size_t size);
operator bool() { return true; }
#if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE static uint32_t dropped() { return 0; }
FORCE_INLINE uint32_t dropped() { return 0; }
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
FORCE_INLINE static int rxMaxEnqueued() { return 0; }
FORCE_INLINE int rxMaxEnqueued() { return 0; }
#endif
FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
FORCE_INLINE static void print(const char* str) { write(str); }
static void print(char, int = 0);
static void print(unsigned char, int = 0);
static void print(int, int = DEC);
static void print(unsigned int, int = DEC);
static void print(long, int = DEC);
static void print(unsigned long, int = DEC);
static void print(double, int = 2);
static void println(const String& s);
static void println(const char[]);
static void println(char, int = 0);
static void println(unsigned char, int = 0);
static void println(int, int = DEC);
static void println(unsigned int, int = DEC);
static void println(long, int = DEC);
static void println(unsigned long, int = DEC);
static void println(double, int = 2);
static void println(void);
operator bool() { return true; }
private:
static void printNumber(unsigned long, const uint8_t);
static void printFloat(double, uint8_t);
};
extern WebSocketSerial webSocketSerial;
Marlin/src/HAL/HAL_ESP32/i2s.cpp
+3 -3
View File
@@ -303,9 +303,9 @@ int i2s_init() {
xTaskCreate(stepperTask, "StepperTask", 10000, NULL, 1, NULL);
// Route the i2s pins to the appropriate GPIO
gpio_matrix_out_check(22, I2S0O_DATA_OUT23_IDX, 0, 0);
gpio_matrix_out_check(25, I2S0O_WS_OUT_IDX, 0, 0);
gpio_matrix_out_check(26, I2S0O_BCK_OUT_IDX, 0, 0);
gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
gpio_matrix_out_check(I2S_BCK, I2S0O_BCK_OUT_IDX, 0, 0);
gpio_matrix_out_check(I2S_WS, I2S0O_WS_OUT_IDX, 0, 0);
// Start the I2S peripheral
return i2s_start(I2S_NUM_0);
Marlin/src/HAL/HAL_ESP32/i2s.h
+6
View File
@@ -29,3 +29,9 @@ int i2s_init();
void i2s_write(uint8_t pin, uint8_t val);
void i2s_push_sample();
// pin definitions
#define I2S_WS 25
#define I2S_BCK 26
#define I2S_DATA 27
Marlin/src/HAL/HAL_LPC1768/main.cpp
+21
View File
@@ -1,3 +1,24 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768
#include <usb/usb.h>
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp
+5 -5
View File
@@ -137,8 +137,11 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
case U8G_COM_MSG_WRITE_BYTE:
//u8g->pin_list[U8G_PI_SET_A0] = 1;
//if (u8g_com_arduino_ssd_start_sequence(u8g) == 0)
// return u8g_i2c_stop(), 0;
if (u8g_com_ssd_I2C_start_sequence(u8g) == 0) {
u8g_i2c_stop();
return 0;
}
if (u8g_i2c_send_byte(arg_val) == 0) {
u8g_i2c_stop();
return 0;
@@ -186,9 +189,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
u8g->pin_list[U8G_PI_SET_A0] = 1; /* force a0 to set again */
u8g_i2c_start(0); // send slave address and write bit
u8g_i2c_send_byte(arg_val ? 0x40 : 0x80); // Write to ? Graphics DRAM mode : Command mode
break;
} // switch
Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp
+67 -1
View File
@@ -65,10 +65,76 @@
#undef SPI_SPEED
#define SPI_SPEED 2 // About 2 MHz
#include <algorithm>
#include <LPC17xx.h>
#include <gpio.h>
#include <Arduino.h>
uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
if (spi_speed == 0) {
gpio_set(mosi_pin, !!(b & 0x80));
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
gpio_set(sck_pin, LOW);
}
else {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, HIGH);
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, LOW);
}
}
return b;
}
uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
for (uint8_t i = 0; i < 8; i++) {
const uint8_t state = (b & 0x80) ? HIGH : LOW;
if (spi_speed == 0) {
gpio_set(sck_pin, LOW);
gpio_set(mosi_pin, state);
gpio_set(mosi_pin, state); // need some setup time
gpio_set(sck_pin, HIGH);
}
else {
for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
gpio_set(sck_pin, LOW);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(mosi_pin, state);
for (uint8_t j = 0; j < spi_speed; j++)
gpio_set(sck_pin, HIGH);
}
b <<= 1;
if (miso_pin >= 0 && gpio_get(miso_pin)) b |= 1;
}
return b;
}
static uint8_t SPI_speed = 0;
static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
swSpiTransfer(val, SPI_speed, clockPin, -1, dataPin);
#if ENABLED(FYSETC_MINI_12864)
swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
#else
swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
#endif
}
uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
Marlin/src/core/boards.h
+1
View File
@@ -194,6 +194,7 @@
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
#define BOARD_MKS_SGEN 1763 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan)
//
// SAM3X8E ARM Cortex M3
Marlin/src/core/debug_out.h
-1
View File
@@ -19,7 +19,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
//
// Serial aliases for debugging.
Marlin/src/core/utility.cpp
+7 -7
View File
@@ -264,15 +264,15 @@ void safe_delay(millis_t ms) {
return conv;
}
// Convert unsigned float to string with 1234.56 format omitting trailing zeros
char* ftostr62rj(const float &f) {
const long i = ((f < 0 ? -f : f) * 1000 + 5) / 10;
conv[0] = RJDIGIT(i, 100000);
// Convert unsigned float to string with 1234.5 format omitting trailing zeros
char* ftostr51rj(const float &f) {
const long i = ((f < 0 ? -f : f) * 100 + 5) / 10;
conv[0] = ' ';
conv[1] = RJDIGIT(i, 10000);
conv[2] = RJDIGIT(i, 1000);
conv[3] = DIGIMOD(i, 100);
conv[4] = '.';
conv[5] = DIGIMOD(i, 10);
conv[3] = RJDIGIT(i, 100);
conv[4] = DIGIMOD(i, 10);
conv[5] = '.';
conv[6] = DIGIMOD(i, 1);
return conv;
}
Marlin/src/core/utility.h
+2 -2
View File
@@ -106,8 +106,8 @@ inline void serial_delay(const millis_t ms) {
// Convert signed float to string with +123.45 format
char* ftostr52sign(const float &x);
// Convert unsigned float to string with 1234.56 format omitting trailing zeros
char* ftostr62rj(const float &x);
// Convert unsigned float to string with 1234.5 format omitting trailing zeros
char* ftostr51rj(const float &x);
// Convert float to rj string with 123 or -12 format
FORCE_INLINE char* ftostr3(const float &x) { return i16tostr3(int16_t(x + (x < 0 ? -0.5f : 0.5f))); }
Marlin/src/feature/power_loss_recovery.cpp
+81 -22
View File
@@ -151,6 +151,12 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
// Machine state
COPY(info.current_position, current_position);
#if HAS_HOME_OFFSET
COPY(info.home_offset, home_offset);
#endif
#if HAS_POSITION_SHIFT
COPY(info.position_shift, position_shift);
#endif
info.feedrate = uint16_t(feedrate_mm_s * 60.0f);
#if HOTENDS > 1
@@ -187,7 +193,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
info.retract_hop = fwretract.current_hop;
#endif
//relative mode
// Relative mode
info.relative_mode = relative_mode;
info.relative_modes_e = gcode.axis_relative_modes[E_AXIS];
@@ -239,20 +245,30 @@ void PrintJobRecovery::resume() {
gcode.process_subcommands_now_P(PSTR("M420 S0 Z0"));
#endif
// Set Z to 0, raise Z by 2mm, and Home (XY only for Cartesian) with no raise
// (Only do simulated homing in Marlin Dev Mode.)
gcode.process_subcommands_now_P(PSTR("G92.0 Z0\nG1 Z" STRINGIFY(RECOVERY_ZRAISE) "\nG28 R0"
#if ENABLED(MARLIN_DEV_MODE)
" S"
#elif !IS_KINEMATIC
" X Y"
// Reset E, raise Z, home XY...
gcode.process_subcommands_now_P(PSTR("G92.9 E0"
#if Z_HOME_DIR > 0
// If Z homing goes to max, reset E and home all
"\nG28R0"
#if ENABLED(MARLIN_DEV_MODE)
"S"
#endif
#else
// Set Z to 0, raise Z by RECOVERY_ZRAISE, and Home (XY only for Cartesian)
// with no raise. (Only do simulated homing in Marlin Dev Mode.)
"Z0\nG1Z" STRINGIFY(RECOVERY_ZRAISE) "\nG28R0"
#if ENABLED(MARLIN_DEV_MODE)
"S"
#elif !IS_KINEMATIC
"XY"
#endif
#endif
));
// Pretend that all axes are homed
axis_homed = axis_known_position = xyz_bits;
char cmd[40], str_1[16], str_2[16];
char cmd[50], str_1[16], str_2[16];
// Select the previously active tool (with no_move)
#if EXTRUDERS > 1
@@ -315,16 +331,16 @@ void PrintJobRecovery::resume() {
memcpy(&mixer.gradient, &info.gradient, sizeof(info.gradient));
#endif
// Restore Z (plus raise) and E positions with G92.0
dtostrf(info.current_position[Z_AXIS] + RECOVERY_ZRAISE, 1, 3, str_1);
dtostrf(info.current_position[E_AXIS]
#if ENABLED(SAVE_EACH_CMD_MODE)
- 5 // Extra extrusion on restart
#endif
, 1, 3, str_2
);
sprintf_P(cmd, PSTR("G92.0 Z%s E%s"), str_1, str_2);
gcode.process_subcommands_now(cmd);
// Extrude and retract to clean the nozzle
#if POWER_LOSS_PURGE_LEN
//sprintf_P(cmd, PSTR("G1 E%d F200"), POWER_LOSS_PURGE_LEN);
//gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F200"));
#endif
#if POWER_LOSS_RETRACT_LEN
sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN - POWER_LOSS_RETRACT_LEN);
gcode.process_subcommands_now(cmd);
#endif
// Move back to the saved XY
dtostrf(info.current_position[X_AXIS], 1, 3, str_1);
@@ -337,13 +353,37 @@ void PrintJobRecovery::resume() {
sprintf_P(cmd, PSTR("G1 Z%s F200"), str_1);
gcode.process_subcommands_now(cmd);
// Un-retract
#if POWER_LOSS_PURGE_LEN
//sprintf_P(cmd, PSTR("G1 E%d F3000"), POWER_LOSS_PURGE_LEN);
//gcode.process_subcommands_now(cmd);
gcode.process_subcommands_now_P(PSTR("G1 E" STRINGIFY(POWER_LOSS_PURGE_LEN) " F3000"));
#endif
// Restore the feedrate
sprintf_P(cmd, PSTR("G1 F%d"), info.feedrate);
gcode.process_subcommands_now(cmd);
//relative mode
if (info.relative_mode) relative_mode = true;
if (info.relative_modes_e) gcode.axis_relative_modes[E_AXIS] = true;
// Restore E position with G92.9
dtostrf(info.current_position[E_AXIS], 1, 3, str_1);
sprintf_P(cmd, PSTR("G92.9 E%s"), str_1);
gcode.process_subcommands_now(cmd);
// Relative mode
relative_mode = info.relative_mode;
gcode.axis_relative_modes[E_AXIS] = info.relative_modes_e;
#if HAS_HOME_OFFSET || HAS_POSITION_SHIFT
LOOP_XYZ(i) {
#if HAS_HOME_OFFSET
home_offset[i] = info.home_offset[i];
#endif
#if HAS_POSITION_SHIFT
position_shift[i] = info.position_shift[i];
#endif
update_workspace_offset((AxisEnum)i);
}
#endif
// Process commands from the old pending queue
uint8_t c = info.commands_in_queue, r = info.cmd_queue_index_r;
@@ -372,6 +412,25 @@ void PrintJobRecovery::resume() {
DEBUG_ECHO(info.current_position[i]);
}
DEBUG_EOL();
#if HAS_HOME_OFFSET
DEBUG_ECHOPGM("home_offset: ");
LOOP_XYZ(i) {
if (i) DEBUG_CHAR(',');
DEBUG_ECHO(info.home_offset[i]);
}
DEBUG_EOL();
#endif
#if HAS_POSITION_SHIFT
DEBUG_ECHOPGM("position_shift: ");
LOOP_XYZ(i) {
if (i) DEBUG_CHAR(',');
DEBUG_ECHO(info.position_shift[i]);
}
DEBUG_EOL();
#endif
DEBUG_ECHOLNPAIR("feedrate: ", info.feedrate);
#if HOTENDS > 1
Marlin/src/feature/power_loss_recovery.h
+9
View File
@@ -35,6 +35,8 @@
#define SAVE_INFO_INTERVAL_MS 0
//#define SAVE_EACH_CMD_MODE
//#define DEBUG_POWER_LOSS_RECOVERY
#define POWER_LOSS_PURGE_LEN 20
#define POWER_LOSS_RETRACT_LEN 10
typedef struct {
uint8_t valid_head;
@@ -42,6 +44,13 @@ typedef struct {
// Machine state
float current_position[NUM_AXIS];
#if HAS_HOME_OFFSET
float home_offset[XYZ];
#endif
#if HAS_POSITION_SHIFT
float position_shift[XYZ];
#endif
uint16_t feedrate;
#if HOTENDS > 1
Marlin/src/gcode/control/M3-M5.cpp
+3 -1
View File
@@ -74,7 +74,9 @@ inline void delay_for_power_down() { safe_delay(SPINDLE_LASER_POWERDOWN_DELAY);
inline void set_spindle_laser_ocr(const uint8_t ocr) {
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
#if ENABLED(SPINDLE_LASER_PWM)
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
#endif
}
#if ENABLED(SPINDLE_LASER_PWM)
Marlin/src/gcode/geometry/G92.cpp
+54 -38
View File
@@ -33,9 +33,23 @@
*/
void GcodeSuite::G92() {
#if ENABLED(CNC_COORDINATE_SYSTEMS)
switch (parser.subcode) {
case 1:
bool didE = false;
#if IS_SCARA || !HAS_POSITION_SHIFT
bool didXYZ = false;
#else
constexpr bool didXYZ = false;
#endif
#if USE_GCODE_SUBCODES
const uint8_t subcode_G92 = parser.subcode;
#else
constexpr uint8_t subcode_G92 = 0;
#endif
switch (subcode_G92) {
default: break;
#if ENABLED(CNC_COORDINATE_SYSTEMS)
case 1: {
// Zero the G92 values and restore current position
#if !IS_SCARA
LOOP_XYZ(i) {
@@ -46,44 +60,46 @@ void GcodeSuite::G92() {
}
}
#endif // Not SCARA
return;
}
#endif
#if ENABLED(CNC_COORDINATE_SYSTEMS)
#define IS_G92_0 (parser.subcode == 0)
#else
#define IS_G92_0 true
#endif
bool didE = false;
#if IS_SCARA || !HAS_POSITION_SHIFT
bool didXYZ = false;
#else
constexpr bool didXYZ = false;
#endif
if (IS_G92_0) LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
const float l = parser.value_axis_units((AxisEnum)i),
v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),
d = v - current_position[i];
if (!NEAR_ZERO(d)) {
#if IS_SCARA || !HAS_POSITION_SHIFT
if (i == E_AXIS) didE = true; else didXYZ = true;
current_position[i] = v; // Without workspaces revert to Marlin 1.0 behavior
#elif HAS_POSITION_SHIFT
if (i == E_AXIS) {
didE = true;
current_position[E_AXIS] = v; // When using coordinate spaces, only E is set directly
} return;
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
case 9: {
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
current_position[i] = parser.value_axis_units((AxisEnum)i);
#if IS_SCARA || !HAS_POSITION_SHIFT
if (i == E_AXIS) didE = true; else didXYZ = true;
#elif HAS_POSITION_SHIFT
if (i == E_AXIS) didE = true;
#endif
}
else {
position_shift[i] += d; // Other axes simply offset the coordinate space
update_workspace_offset((AxisEnum)i);
}
} break;
#endif
case 0: {
LOOP_XYZE(i) {
if (parser.seenval(axis_codes[i])) {
const float l = parser.value_axis_units((AxisEnum)i),
v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),
d = v - current_position[i];
if (!NEAR_ZERO(d)) {
#if IS_SCARA || !HAS_POSITION_SHIFT
if (i == E_AXIS) didE = true; else didXYZ = true;
current_position[i] = v; // Without workspaces revert to Marlin 1.0 behavior
#elif HAS_POSITION_SHIFT
if (i == E_AXIS) {
didE = true;
current_position[E_AXIS] = v; // When using coordinate spaces, only E is set directly
}
else {
position_shift[i] += d; // Other axes simply offset the coordinate space
update_workspace_offset((AxisEnum)i);
}
#endif
}
#endif
}
}
}
} break;
}
#if ENABLED(CNC_COORDINATE_SYSTEMS)
Marlin/src/gcode/queue.cpp
+3 -2
View File
@@ -526,8 +526,9 @@ void gcode_line_error(PGM_P const err, const int8_t port) {
#endif // BINARY_FILE_TRANSFER
FORCE_INLINE bool is_M29(const char * const cmd) {
return cmd[0] == 'M' && cmd[1] == '2' && cmd[2] == '9' && !WITHIN(cmd[3], '0', '9');
FORCE_INLINE bool is_M29(const char * const cmd) { // matches "M29" & "M29 ", but not "M290", etc
const char * const m29 = strstr_P(cmd, PSTR("M29"));
return m29 && !NUMERIC(m29[3]);
}
/**
Marlin/src/gcode/sdcard/M23.cpp
-3
View File
@@ -31,9 +31,6 @@
* M23: Open a file
*/
void GcodeSuite::M23() {
#if ENABLED(POWER_LOSS_RECOVERY)
card.removeJobRecoveryFile();
#endif
// Simplify3D includes the size, so zero out all spaces (#7227)
for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
card.openFile(parser.string_arg, true);
Marlin/src/inc/Conditionals_LCD.h
+2
View File
@@ -143,6 +143,8 @@
#define DOGLCD
#define ULTIPANEL
#define LCD_CONTRAST_MIN 0
#define LCD_CONTRAST_MAX 255
#define DEFAULT_LCD_CONTRAST 255
#define LED_COLORS_REDUCE_GREEN
Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp
+1 -1
View File
@@ -517,7 +517,7 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
else {
#if DISABLED(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
if (!TEST(axis_known_position, axis))
lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
else
#endif
lcd_put_u8str(value);
Marlin/src/lcd/dogm/status_screen_DOGM.cpp
+1 -1
View File
@@ -245,7 +245,7 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
else {
#if DISABLED(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING)
if (!TEST(axis_known_position, axis))
lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" "));
else
#endif
lcd_put_u8str(value);
Marlin/src/lcd/dogm/ultralcd_DOGM.h
+5 -1
View File
@@ -112,7 +112,11 @@
//#define U8G_CLASS U8GLIB_MINI12864
//#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 8 stripes
#define U8G_CLASS U8GLIB_MINI12864_2X
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes
#if EITHER(FYSETC_MINI_12864, TARGET_LPC1768)
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, DOGLCD_A0 // 4 stripes SW-SPI
#else
#define U8G_PARAM DOGLCD_CS, DOGLCD_A0 // 4 stripes HW-SPI
#endif
#elif ENABLED(U8GLIB_SH1106_EINSTART)
// Connected via motherboard header
#define U8G_CLASS U8GLIB_SH1106_128X64
Marlin/src/lcd/language/language_cz.h
+143 -9
View File
@@ -35,15 +35,20 @@
*/
#define DISPLAY_CHARSET_ISO10646_CZ
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("áÁčČďĎéÉěĚíÍňŇóÓřŘšŠťŤúÚůŮýÝžŽ³")
#define CHARSIZE 2
#define WELCOME_MSG MACHINE_NAME _UxGT(" připraven.")
#define MSG_YES _UxGT("ANO")
#define MSG_NO _UxGT("NE")
#define MSG_BACK _UxGT("Zpět")
#define MSG_SD_INSERTED _UxGT("Karta vložena")
#define MSG_SD_REMOVED _UxGT("Karta vyjmuta")
#define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy")
#define MSG_MAIN _UxGT("Hlavní nabídka")
#define MSG_ADVANCED_SETTINGS _UxGT("Další nastavení")
#define MSG_CONFIGURATION _UxGT("Konfigurace")
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory")
#define MSG_DEBUG_MENU _UxGT("Nabídka ladění")
@@ -56,6 +61,7 @@
#define MSG_AUTO_HOME_X _UxGT("Domů osa X")
#define MSG_AUTO_HOME_Y _UxGT("Domů osa Y")
#define MSG_AUTO_HOME_Z _UxGT("Domů osa Z")
#define MSG_AUTO_Z_ALIGN _UxGT("Auto srovnání Z")
#define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky")
#define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte")
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod")
@@ -76,7 +82,13 @@
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" hotend")
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" podlož")
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" nast")
#define MSG_PREHEAT_CUSTOM _UxGT("Zahřát vlastní")
#define MSG_COOLDOWN _UxGT("Zchladit")
#define MSG_LASER_MENU _UxGT("Ovládání laseru")
#define MSG_LASER_OFF _UxGT("Vypnout laser")
#define MSG_LASER_ON _UxGT("Zapnout laser")
#define MSG_LASER_POWER _UxGT("Výkon laseru")
#define MSG_SPINDLE_REVERSE _UxGT("Vřeteno opačně")
#define MSG_SWITCH_PS_ON _UxGT("Zapnout napájení")
#define MSG_SWITCH_PS_OFF _UxGT("Vypnout napájení")
#define MSG_EXTRUDE _UxGT("Vytlačit (extr.)")
@@ -88,10 +100,23 @@
#define MSG_NEXT_CORNER _UxGT("Další roh")
#define MSG_EDITING_STOPPED _UxGT("Konec úprav sítě")
#define MSG_MESH_X _UxGT("Index X")
#define MSG_MESH_Y _UxGT("Index Y")
#define MSG_MESH_EDIT_Z _UxGT("Hodnota Z")
#define MSG_USER_MENU _UxGT("Vlastní příkazy")
#define MSG_UBL_DOING_G29 _UxGT("Provádím G29")
#define MSG_UBL_UNHOMED _UxGT("Přejeďte domů")
#define MSG_UBL_TOOLS _UxGT("UBL nástroje")
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#define MSG_IDEX_MENU _UxGT("Režim IDEX")
#define MSG_OFFSETS_MENU _UxGT("Ofsety nástrojů")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplikace")
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Zrcadlení")
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Plná kontrola")
#define MSG_X_OFFSET _UxGT("2. tryska X")
#define MSG_Y_OFFSET _UxGT("2. tryska Y")
#define MSG_Z_OFFSET _UxGT("2. tryska Z")
#define MSG_UBL_MANUAL_MESH _UxGT("Manuální síť bodů")
#define MSG_UBL_BC_INSERT _UxGT("Vložte kartu, změřte")
#define MSG_UBL_BC_INSERT2 _UxGT("Změřte")
@@ -169,7 +194,6 @@
#define MSG_INTENSITY_B _UxGT("Modrá intenzita")
#define MSG_INTENSITY_W _UxGT("Bílá intenzita")
#define MSG_LED_BRIGHTNESS _UxGT("Jas")
#define MSG_USER_MENU _UxGT("Vlastní příkazy")
#define MSG_MOVING _UxGT("Posouvání...")
#define MSG_FREE_XY _UxGT("Uvolnit XY")
@@ -177,6 +201,7 @@
#define MSG_MOVE_Y _UxGT("Posunout Y")
#define MSG_MOVE_Z _UxGT("Posunout Z")
#define MSG_MOVE_E _UxGT("Extrudér")
#define MSG_HOTEND_TOO_COLD _UxGT("Hotend je studený")
#define MSG_MOVE_01MM _UxGT("Posunout o 0,1mm")
#define MSG_MOVE_1MM _UxGT("Posunout o 1mm")
#define MSG_MOVE_10MM _UxGT("Posunout o 10mm")
@@ -184,6 +209,7 @@
#define MSG_BED_Z _UxGT("Výška podl.")
#define MSG_NOZZLE _UxGT("Tryska")
#define MSG_BED _UxGT("Podložka")
#define MSG_CHAMBER _UxGT("Komora")
#define MSG_FAN_SPEED _UxGT("Rychlost vent.")
#define MSG_EXTRA_FAN_SPEED _UxGT("Rychlost ex. vent.")
#define MSG_FLOW _UxGT("Průtok")
@@ -250,10 +276,15 @@
#define MSG_LOAD_EEPROM _UxGT("Načíst nastavení")
#define MSG_RESTORE_FAILSAFE _UxGT("Obnovit výchozí")
#define MSG_INIT_EEPROM _UxGT("Inic. EEPROM")
#define MSG_SD_UPDATE _UxGT("Aktualizace z SD")
#define MSG_RESET_PRINTER _UxGT("Reset tiskárny")
#define MSG_REFRESH _UxGT("Obnovit")
#define MSG_WATCH _UxGT("Info obrazovka")
#define MSG_PREPARE _UxGT("Připrava tisku")
#define MSG_TUNE _UxGT("Doladění tisku")
#define MSG_START_PRINT _UxGT("Spustit tisk")
#define MSG_BUTTON_PRINT _UxGT("Tisk")
#define MSG_BUTTON_CANCEL _UxGT("Zrušit")
#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk")
#define MSG_RESUME_PRINT _UxGT("Obnovit tisk")
#define MSG_STOP_PRINT _UxGT("Zastavit tisk")
@@ -277,6 +308,12 @@
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("S UnRet V")
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Délka retrakce")
#define MSG_TOOL_CHANGE _UxGT("Výměna nástroje")
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Zdvih Z")
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Rychlost primár.")
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Rychlost retrak.")
#define MSG_NOZZLE_STANDBY _UxGT("Tryska standby")
#define MSG_FILAMENTCHANGE _UxGT("Vyměnit filament")
#define MSG_FILAMENTLOAD _UxGT("Zavést filament")
#define MSG_FILAMENTUNLOAD _UxGT("Vysunout filament")
@@ -287,16 +324,22 @@
#define MSG_ZPROBE_OUT _UxGT("Sonda Z mimo podl")
#define MSG_SKEW_FACTOR _UxGT("Faktor zkosení")
#define MSG_BLTOUCH _UxGT("BLTouch")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch Reset")
#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch Vysunout")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch Zasunout")
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch self-test")
#define MSG_BLTOUCH_RESET _UxGT("BLTouch reset")
#define MSG_BLTOUCH_DEPLOY _UxGT("BLTouch vysunout")
#define MSG_BLTOUCH_SW_MODE _UxGT("SW výsun BLTouch")
#define MSG_BLTOUCH_5V_MODE _UxGT("BLTouch 5V režim")
#define MSG_BLTOUCH_OD_MODE _UxGT("BLTouch OD režim")
#define MSG_BLTOUCH_STOW _UxGT("BLTouch zasunout")
#define MSG_MANUAL_DEPLOY _UxGT("Vysunout Z-sondu")
#define MSG_MANUAL_STOW _UxGT("Zasunout Z-sondu")
#define MSG_HOME _UxGT("Domů") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST _UxGT("první")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z ofset")
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_BABYSTEP_TOTAL _UxGT("Celkem")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř.podl.")
@@ -307,6 +350,8 @@
#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA")
#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.")
#define MSG_ERR_MINTEMP_BED _UxGT("NÍZ. TEPL. PODL.")
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err: MAXTEMP KOMORA")
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err: MINTEMP KOMORA")
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
#define MSG_HALTED _UxGT("TISK. ZASTAVENA")
#define MSG_PLEASE_RESET _UxGT("Proveďte reset")
@@ -380,18 +425,82 @@
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Vytlačit víc")
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Obnovit tisk")
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Tryska: ")
#define MSG_RUNOUT_SENSOR _UxGT("Senzor filamentu")
#define MSG_ERR_HOMING_FAILED _UxGT("Parkování selhalo")
#define MSG_ERR_PROBING_FAILED _UxGT("Kalibrace selhala")
#define MSG_M600_TOO_COLD _UxGT("M600: Moc studený")
#define MSG_MMU2_FILAMENT_CHANGE_HEADER _UxGT("VÝMĚNA FILAMENTU")
#define MSG_MMU2_CHOOSE_FILAMENT_HEADER _UxGT("VYBERTE FILAMENT")
#define MSG_MMU2_MENU _UxGT("MMU")
#define MSG_MMU2_WRONG_FIRMWARE _UxGT("Aktual. MMU firmware!")
#define MSG_MMU2_NOT_RESPONDING _UxGT("MMU potř. pozornost.")
#define MSG_MMU2_RESUME _UxGT("Obnovit tisk")
#define MSG_MMU2_RESUMING _UxGT("Obnovování...")
#define MSG_MMU2_LOAD_FILAMENT _UxGT("Zavést filament")
#define MSG_MMU2_LOAD_ALL _UxGT("Zavést všechny")
#define MSG_MMU2_LOAD_TO_NOZZLE _UxGT("Zavést do trysky")
#define MSG_MMU2_EJECT_FILAMENT _UxGT("Vysunout filament")
#define MSG_MMU2_EJECT_FILAMENT0 _UxGT("Vysun. filament 1")
#define MSG_MMU2_EJECT_FILAMENT1 _UxGT("Vysun. filament 2")
#define MSG_MMU2_EJECT_FILAMENT2 _UxGT("Vysun. filament 3")
#define MSG_MMU2_EJECT_FILAMENT3 _UxGT("Vysun. filament 4")
#define MSG_MMU2_EJECT_FILAMENT4 _UxGT("Vysun. filament 5")
#define MSG_MMU2_UNLOAD_FILAMENT _UxGT("Vytáhnout filament")
#define MSG_MMU2_LOADING_FILAMENT _UxGT("Zavádění fil. %i...")
#define MSG_MMU2_EJECTING_FILAMENT _UxGT("Vytahování fil. ...")
#define MSG_MMU2_UNLOADING_FILAMENT _UxGT("Vysouvání fil....")
#define MSG_MMU2_ALL _UxGT("Všechny")
#define MSG_MMU2_FILAMENT0 _UxGT("Filament 1")
#define MSG_MMU2_FILAMENT1 _UxGT("Filament 2")
#define MSG_MMU2_FILAMENT2 _UxGT("Filament 3")
#define MSG_MMU2_FILAMENT3 _UxGT("Filament 4")
#define MSG_MMU2_FILAMENT4 _UxGT("Filament 5")
#define MSG_MMU2_RESET _UxGT("Resetovat MMU")
#define MSG_MMU2_RESETTING _UxGT("Resetování MMU...")
#define MSG_MMU2_EJECT_RECOVER _UxGT("Vytáhněte, klikněte")
#define MSG_MIX _UxGT("Mix")
#define MSG_MIX_COMPONENT _UxGT("Komponenta")
#define MSG_MIXER _UxGT("Mixér")
#define MSG_GRADIENT _UxGT("Přechod")
#define MSG_FULL_GRADIENT _UxGT("Celý přechod")
#define MSG_TOGGLE_MIX _UxGT("Přepnout mix")
#define MSG_CYCLE_MIX _UxGT("Střídat mix")
#define MSG_GRADIENT_MIX _UxGT("Přechod mix")
#define MSG_REVERSE_GRADIENT _UxGT("Opačný přechod")
#if LCD_WIDTH >= 20
#define MSG_ACTIVE_VTOOL _UxGT("Aktivní V-nástroj")
#define MSG_START_VTOOL _UxGT("Spustit V-nástroj")
#define MSG_END_VTOOL _UxGT("Ukončit V-nástroj")
#define MSG_GRADIENT_ALIAS _UxGT("Alias V-nástroje")
#define MSG_RESET_VTOOLS _UxGT("Resetovat V-nástroj")
#define MSG_COMMIT_VTOOL _UxGT("Uložit V-nástroj mix")
#define MSG_VTOOLS_RESET _UxGT("V-nástroj resetovat")
#else
#define MSG_ACTIVE_VTOOL _UxGT("Aktivní V-nástr.")
#define MSG_START_VTOOL _UxGT("Spustit V-nástr.")
#define MSG_END_VTOOL _UxGT("Ukončit V-nástr.")
#define MSG_GRADIENT_ALIAS _UxGT("Alias V-nástr.")
#define MSG_RESET_VTOOLS _UxGT("Reset. V-nástr.")
#define MSG_COMMIT_VTOOL _UxGT("Uložit V-nás. mix")
#define MSG_VTOOLS_RESET _UxGT("V-nástr. reset.")
#endif
#define MSG_START_Z _UxGT("Počáteční Z")
#define MSG_END_Z _UxGT(" Koncové Z")
#define MSG_BRICKOUT _UxGT("Brickout")
#define MSG_INVADERS _UxGT("Invaders")
#define MSG_SNAKE _UxGT("Sn4k3")
#define MSG_MAZE _UxGT("Bludiště")
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlačítko")
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("pro obnovení tisku")
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parkování...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...")
@@ -399,21 +508,46 @@
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
#define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
#define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na")
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("ukončení")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_3 _UxGT("vytlačování")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
#define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Stikněte tlač.")
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("pro obnovení")
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parkování...")
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí")
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Klikněte pro")
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("ukončení")
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
#endif // LCD_HEIGHT < 4
#define MSG_TMC_DRIVERS _UxGT("TMC budiče")
#define MSG_TMC_CURRENT _UxGT("Proud budičů")
#define MSG_TMC_HYBRID_THRS _UxGT("Hybridní práh")
#define MSG_TMC_HOMING_THRS _UxGT("Domů bez senzorů")
#define MSG_TMC_STEPPING_MODE _UxGT("Režim kroků")
#define MSG_TMC_STEALTH_ENABLED _UxGT("StealthChop povolen")
#define MSG_SERVICE_RESET _UxGT("Reset")
#define MSG_SERVICE_IN _UxGT(" za:")
#define MSG_BACKLASH _UxGT("Vůle")
#define MSG_BACKLASH_CORRECTION _UxGT("Korekce")
#define MSG_BACKLASH_SMOOTHING _UxGT("Vyhlazení")
Marlin/src/lcd/language/language_en.h
+3
View File
@@ -1362,6 +1362,9 @@
#ifndef MSG_ADVANCED_PAUSE_WAITING_1
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Click to continue")
#endif
#ifndef MSG_PAUSE_PRINT_INIT_1
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parking...")
#endif
#ifndef MSG_FILAMENT_CHANGE_INIT_1
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#endif
Marlin/src/lcd/language/language_sk.h
+14
View File
@@ -40,6 +40,8 @@
#define THIS_LANGUAGES_SPECIAL_SYMBOLS _UxGT("äÄáÁčČďĎéÉíÍĺĹľĽňŇóÓôÔŕŔšŠťŤúÚýÝžŽ³")
#define WELCOME_MSG MACHINE_NAME _UxGT(" pripravená.")
#define MSG_YES _UxGT("ÁNO")
#define MSG_NO _UxGT("NIE")
#define MSG_BACK _UxGT("Naspäť")
#define MSG_SD_INSERTED _UxGT("Karta vložená")
#define MSG_SD_REMOVED _UxGT("Karta vybraná")
@@ -104,6 +106,7 @@
#define MSG_UBL_TOOLS _UxGT("Nástroje UBL")
#define MSG_UBL_LEVEL_BED _UxGT("UBL rovnanie")
#define MSG_IDEX_MENU _UxGT("IDEX režim")
#define MSG_OFFSETS_MENU _UxGT("Offset nástrojov")
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-parkovanie")
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplikácia")
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Zrkadlená kópia")
@@ -276,6 +279,9 @@
#define MSG_WATCH _UxGT("Info. obrazovka")
#define MSG_PREPARE _UxGT("Príprava tlače")
#define MSG_TUNE _UxGT("Doladenie tlače")
#define MSG_START_PRINT _UxGT("Spustiť tlač")
#define MSG_BUTTON_PRINT _UxGT("Tlačiť")
#define MSG_BUTTON_CANCEL _UxGT("Zrušiť")
#define MSG_PAUSE_PRINT _UxGT("Pozastaviť tlač")
#define MSG_RESUME_PRINT _UxGT("Obnoviť tlač")
#define MSG_STOP_PRINT _UxGT("Zastaviť tlač")
@@ -330,6 +336,7 @@
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_BABYSTEP_TOTAL _UxGT("Celkom")
#define MSG_ENDSTOP_ABORT _UxGT("Zastavenie Endstop")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba ohrevu")
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba ohrevu podl.")
@@ -461,6 +468,10 @@
#define MSG_VTOOLS_RESET _UxGT("V-tools resetované")
#define MSG_START_Z _UxGT("Počiat.Z")
#define MSG_END_Z _UxGT("Konečn.Z")
#define MSG_BRICKOUT _UxGT("Brickout")
#define MSG_INVADERS _UxGT("Nájazdníci")
#define MSG_SNAKE _UxGT("Had")
#define MSG_MAZE _UxGT("Bludisko")
//
// Filament Change screens show up to 3 lines on a 4-line display
@@ -515,3 +526,6 @@
#define MSG_SERVICE_RESET _UxGT("Vynulovať")
#define MSG_SERVICE_IN _UxGT(" za:")
#define MSG_BACKLASH _UxGT("Kompenz. vôle")
#define MSG_BACKLASH_CORRECTION _UxGT("Korekcia")
#define MSG_BACKLASH_SMOOTHING _UxGT("Vyhladzovanie")
Marlin/src/lcd/menu/menu.cpp
+2 -2
View File
@@ -167,9 +167,9 @@ DEFINE_MENU_EDIT_ITEM(float3); // 123 right-justified
DEFINE_MENU_EDIT_ITEM(float52); // 123.45
DEFINE_MENU_EDIT_ITEM(float43); // 1.234
DEFINE_MENU_EDIT_ITEM(float5); // 12345 right-justified
DEFINE_MENU_EDIT_ITEM(float51); // +1234.5
DEFINE_MENU_EDIT_ITEM(float51); // 1234.5 right-justified
DEFINE_MENU_EDIT_ITEM(float51sign); // +1234.5
DEFINE_MENU_EDIT_ITEM(float52sign); // +123.45
DEFINE_MENU_EDIT_ITEM(float62); // 1234.56 right-justified
DEFINE_MENU_EDIT_ITEM(long5); // 12345 right-justified
void MenuItem_bool::action_edit(PGM_P pstr, bool *ptr, screenFunc_t callback) {
Marlin/src/lcd/menu/menu.h
+11 -7
View File
@@ -24,6 +24,8 @@
#include "../ultralcd.h"
#include "../../inc/MarlinConfig.h"
#include "limits.h"
extern int8_t encoderLine, encoderTopLine, screen_items;
extern bool screen_changed;
@@ -54,9 +56,9 @@ DECLARE_MENU_EDIT_TYPE(float, float3, ftostr3, 1 ); // 123
DECLARE_MENU_EDIT_TYPE(float, float52, ftostr52, 100 ); // 123.45
DECLARE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000 ); // 1.234
DECLARE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f ); // 12345 right-justified
DECLARE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10 ); // +1234.5
DECLARE_MENU_EDIT_TYPE(float, float51, ftostr51rj, 10 ); // 1234.5 right-justified
DECLARE_MENU_EDIT_TYPE(float, float51sign, ftostr51sign, 10 ); // +1234.5
DECLARE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100 ); // +123.45
DECLARE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100 ); // 1234.56 right-justified
DECLARE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f ); // 12345 right-justified
////////////////////////////////////////////
@@ -119,9 +121,9 @@ DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float3); // 123 right-justif
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52); // 123.45
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float43); // 1.234
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float5); // 12345 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51); // +1234.5
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51); // 1234.5 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float51sign); // +1234.5
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float52sign); // +123.45
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(float62); // 1234.56 right-justified
DEFINE_DRAW_MENU_ITEM_SETTING_EDIT(long5); // 12345 right-justified
#define draw_menu_item_edit_bool(sel, row, pstr, pstr2, data, ...) DRAW_BOOL_SETTING(sel, row, pstr, data)
@@ -179,8 +181,10 @@ class TMenuItem : MenuItemBase {
static char* to_string(const int16_t value) { return NAME::strfunc(unscale(value)); }
public:
static void action_edit(PGM_P const pstr, type_t * const ptr, const type_t minValue, const type_t maxValue, const screenFunc_t callback=NULL, const bool live=false) {
const int16_t minv = scale(minValue);
init(pstr, ptr, minv, int16_t(scale(maxValue)) - minv, int16_t(scale(*ptr)) - minv, edit, callback, live);
// Make sure minv and maxv fit within int16_t
const int16_t minv = MAX(scale(minValue), INT16_MIN),
maxv = MIN(scale(maxValue), INT16_MAX);
init(pstr, ptr, minv, maxv - minv, scale(*ptr) - minv, edit, callback, live);
}
static void edit() { MenuItemBase::edit(to_string, load); }
};
@@ -199,8 +203,8 @@ DECLARE_MENU_EDIT_ITEM(float52);
DECLARE_MENU_EDIT_ITEM(float43);
DECLARE_MENU_EDIT_ITEM(float5);
DECLARE_MENU_EDIT_ITEM(float51);
DECLARE_MENU_EDIT_ITEM(float51sign);
DECLARE_MENU_EDIT_ITEM(float52sign);
DECLARE_MENU_EDIT_ITEM(float62);
DECLARE_MENU_EDIT_ITEM(long5);
class MenuItem_bool {
Marlin/src/lcd/menu/menu_advanced.cpp
+4 -4
View File
@@ -571,14 +571,14 @@ void menu_backlash();
START_MENU();
MENU_BACK(MSG_ADVANCED_SETTINGS);
#define EDIT_QSTEPS(Q) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning)
#define EDIT_QSTEPS(Q) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_##Q##STEPS, &planner.settings.axis_steps_per_mm[_AXIS(Q)], 5, 9999, _planner_refresh_positioning)
EDIT_QSTEPS(A);
EDIT_QSTEPS(B);
EDIT_QSTEPS(C);
#if ENABLED(DISTINCT_E_FACTORS)
#define EDIT_ESTEPS(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning);
#define EDIT_ESTEPS(N,E) MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_E##N##STEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(E)], 5, 9999, _planner_refresh_e##E##_positioning)
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS_N(active_extruder)], 5, 9999, _planner_refresh_positioning);
EDIT_ESTEPS(1,0);
EDIT_ESTEPS(2,1);
#if E_STEPPERS > 2
@@ -594,7 +594,7 @@ void menu_backlash();
#endif // E_STEPPERS > 3
#endif // E_STEPPERS > 2
#elif E_STEPPERS
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float51, MSG_ESTEPS, &planner.settings.axis_steps_per_mm[E_AXIS], 5, 9999, _planner_refresh_positioning);
#endif
END_MENU();
Marlin/src/module/probe.cpp
+26 -15
View File
@@ -310,24 +310,35 @@ inline void do_probe_raise(const float z_raise) {
FORCE_INLINE void probe_specific_action(const bool deploy) {
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
do {
#if ENABLED(PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED)
if (deploy == (READ(Z_MIN_PROBE_PIN) == Z_MIN_PROBE_ENDSTOP_INVERTING)) break;
#endif
BUZZ(100, 659);
BUZZ(100, 698);
BUZZ(100, 659);
BUZZ(100, 698);
PGM_P const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
ui.return_to_status(); // To display the new status message
ui.set_status_P(ds_str, 99);
serialprintPGM(ds_str);
SERIAL_EOL();
PGM_P const ds_str = deploy ? PSTR(MSG_MANUAL_DEPLOY) : PSTR(MSG_MANUAL_STOW);
ui.return_to_status(); // To display the new status message
ui.set_status_P(ds_str, 99);
serialprintPGM(ds_str);
SERIAL_EOL();
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), PSTR("Continue"));
#endif
while (wait_for_user) idle();
ui.reset_status();
KEEPALIVE_STATE(IN_HANDLER);
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
#if ENABLED(HOST_PROMPT_SUPPORT)
host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Stow Probe"), PSTR("Continue"));
#endif
while (wait_for_user) idle();
ui.reset_status();
KEEPALIVE_STATE(IN_HANDLER);
} while(
#if ENABLED(PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED)
true
#else
false
#endif
);
#endif // PAUSE_BEFORE_DEPLOY_STOW
Marlin/src/pins/pins.h
+2
View File
@@ -316,6 +316,8 @@
#include "pins_RAMPS_RE_ARM.h" // LPC1768 env:LPC1768
#elif MB(MKS_SBASE)
#include "pins_MKS_SBASE.h" // LPC1768 env:LPC1768
#elif MB(MKS_SGEN)
#include "pins_MKS_SGEN.h" // LPC1769 env:LPC1769
#elif MB(AZSMZ_MINI)
#include "pins_AZSMZ_MINI.h" // LPC1768 env:LPC1768
#elif MB(AZTEEG_X5_GT)
Marlin/src/pins/pins_AZTEEG_X5_MINI.h
+3 -7
View File
@@ -185,13 +185,9 @@
//
// SD Support
//
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
//#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
// for the onboard card. Init card from LCD menu or send M21 whenever printer
// is powered on to enable SD access.
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#define LPC_SD_ONBOARD
#endif
#if ENABLED(LPC_SD_LCD)
Marlin/src/pins/pins_BIGTREE_SKR_V1.3.h
+13 -4
View File
@@ -208,15 +208,24 @@
#define LCD_PINS_D7 P1_23
#endif
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P1_21
#define DOGLCD_A0 P1_22
#endif
#endif
#endif // ULTRA_LCD
//#define USB_SD_DISABLED
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
//
// SD Support
//
#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
//#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_LCD
#endif
#if ENABLED(LPC_SD_LCD)
Marlin/src/pins/pins_BIQU_SKR_V1.1.h
+18 -7
View File
@@ -105,18 +105,29 @@
#define LCD_PINS_RS P0_16
#define LCD_PINS_ENABLE P0_18
#define LCD_PINS_D4 P0_15
#if ENABLED(MKS_MINI_12864)
#define DOGLCD_CS P2_06
#define DOGLCD_A0 P0_16
#endif
#endif
//
// SD Support
//
//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
// for the onboard card. Init card from LCD menu or send M21 whenever printer
// is powered on to enable SD access.
// MKS_MINI_12864 strongly prefers the SD card on the display and
// requires jumpers on the SKR V1.1 board as documented here:
// https://www.facebook.com/groups/505736576548648/permalink/630639874058317/
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#if ENABLED(MKS_MINI_12864)
#define LPC_SD_LCD
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#else
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#endif
#if ENABLED(LPC_SD_LCD)
Marlin/src/pins/pins_FORMBOT_TREX3.h
+1 -1
View File
@@ -143,7 +143,7 @@
#define LED_PIN 13
#endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_PWM_PIN -1 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
Marlin/src/pins/pins_MKS_SBASE.h
+47 -20
View File
@@ -28,8 +28,12 @@
#error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
#endif
#define BOARD_NAME "MKS SBASE"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"
#ifndef BOARD_NAME
#define BOARD_NAME "MKS SBASE"
#endif
#ifndef BOARD_WEBSITE_URL
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SBASE"
#endif
#define LED_PIN P1_18 // Used as a status indicator
#define LED2_PIN P1_19
@@ -154,23 +158,11 @@
#define ENET_TXD0 P1_00 // J12-11
#define ENET_TXD1 P1_01 // J12-12
/**
* The SBase can share the on-board SD card with a PC via USB the following
* definitions control this feature:
*/
//#define USB_SD_DISABLED
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
/**
* There are a number of configurations available for the SBase SD card reader.
* - A custom cable can be used to allow access to the LCD based SD card.
* - A standard cable can be used for access to the LCD SD card (but no SD detect).
* - The onboard SD card can be used and optionally shared with a PC via USB.
*/
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive attached to the control board
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#if ENABLED(LPC_SD_CUSTOM_CABLE)
@@ -249,6 +241,41 @@
#define DOGLCD_SCK SCK_PIN
#define DOGLCD_MOSI MOSI_PIN
#endif
#if ENABLED(FYSETC_MINI_12864)
/**
* The Fysetc display can NOT use the SCK and MOSI pins on EXP2, so a
* special cable is needed to go between EXP2 on the FYSETC and the
* controller board's EXP2 and J8. It also means that a software SPI
* is needed to drive those pins.
*
* The Fysetc requires mode 3 SPI interface.
*
* Pins 6, 7 & 8 on EXP2 are no connects. That means a second special
* cable will be needed if the RGB LEDs are to be active.
*/
#define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on Fysetc schematic)
#define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on Fysetc schematic)
#define DOGLCD_SCK P2_11 // J8-5 (SCK on Fysetc schematic)
#define DOGLCD_MOSI P4_28 // J8-6 (MOSI on Fysetc schematic)
#define RGB_LED
//#define RGBW_LED
#if EITHER(RGB_LED, RGBW_LED)
#define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on Fysetc schematic)
#define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on Fysetc schematic)
#define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on Fysetc schematic)
//#define RGB_LED_W_PIN -1
#endif
#elif ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
#endif
#endif
/**
@@ -281,7 +308,7 @@
#endif
#endif
#if HAS_DRIVER(TMC2208)
#if MB(MKS_SBASE) && HAS_DRIVER(TMC2208)
// The shortage of pins becomes apparent.
// Worst case you may have to give up the LCD
// RX pins need to be interrupt capable
Marlin/src/pins/pins_MKS_SGEN.h
+60
View File
@@ -0,0 +1,60 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* MKS SGen pin assignments
*/
#ifndef LPC1769
#error "Oops! Make sure you have the LPC1769 environment selected in your IDE."
#endif
#define BOARD_NAME "MKS SGEN"
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks/MKS-SGEN"
#include "pins_MKS_SBASE.h"
#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
//#undef BTN_EN1
//#undef BTN_EN2
//#define BTN_EN1 P1_23 // EXP2.5
//#define BTN_EN2 P1_22 // EXP2.3
#if HAS_DRIVER(TMC2208)
// The shortage of pins becomes apparent.
// In the worst case you may have to give up the LCD.
// RX pins must be interrupt-capable.
#define X_SERIAL_TX_PIN P4_29 // J8-2
#define X_SERIAL_RX_PIN P4_29 // J8-2
#define Y_SERIAL_TX_PIN P2_08 // J8-3
#define Y_SERIAL_RX_PIN P2_08 // J8-3
#define Z_SERIAL_TX_PIN P2_11 // J8-4
#define Z_SERIAL_RX_PIN P2_11 // J8-4
#define E0_SERIAL_TX_PIN P2_13 // J8-5
#define E0_SERIAL_RX_PIN P2_13 // J8-5
#endif
Marlin/src/pins/pins_RAMPS_FD_V1.h
+4 -1
View File
@@ -156,7 +156,10 @@
#define LCD_PINS_D7 29
#endif
#if ENABLED(MINIPANEL)
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_CS LCD_PINS_ENABLE
#define DOGLCD_A0 LCD_PINS_RS
#elif ENABLED(MINIPANEL)
#define DOGLCD_CS 25
#define DOGLCD_A0 27
#endif
Marlin/src/pins/pins_RAMPS_RE_ARM.h
+35 -25
View File
@@ -269,11 +269,21 @@
#elif ENABLED(ULTRA_LCD)
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01
#define BTN_ENC P1_04
#else
#define BEEPER_PIN P1_30 // (37) not 5V tolerant
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#endif
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
@@ -296,13 +306,6 @@
#if ANY(VIKI2, miniVIKI)
// #define LCD_SCREEN_ROT_180
#define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
#define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
#define BTN_ENC P2_11 // (35) J3-3 & AUX-4
#define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant)
#define KILL_PIN P1_22 // (41) J5-4 & AUX-4
#define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN
@@ -311,8 +314,17 @@
#define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#if ENABLED(FYSETC_MINI_12864)
#define DOGLCD_SCK P0_15
#define DOGLCD_MOSI P0_18
#define DOGLCD_CS P1_09 // use Ethernet connector for EXP1 cable signals
#define DOGLCD_A0 P1_14
#else
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#endif
#define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers
#define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
#define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
@@ -323,11 +335,6 @@
#endif
#endif
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(MINIPANEL)
// GLCD features
// Uncomment screen orientation
@@ -354,18 +361,21 @@
#define ENET_TXD0 P1_00 // (78) J12-11
#define ENET_TXD1 P1_01 // (79) J12-12
//#define USB_SD_DISABLED
#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device
//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board
//
// SD Support
//
#if !ANY(LPC_SD_LCD, LPC_SD_ONBOARD, LPC_SD_CUSTOM_CABLE)
#undef USB_SD_DISABLED
#define USB_SD_ONBOARD
#define LPC_SD_ONBOARD
#endif
#if ENABLED(LPC_SD_LCD)
#define SCK_PIN P0_15
#define MISO_PIN P0_17
#define MOSI_PIN P0_18
#define SS_PIN P1_23 // Chip select for SD card used by Marlin
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
#elif ENABLED(LPC_SD_ONBOARD)
Marlin/src/sd/cardreader.cpp
+1
View File
@@ -1030,6 +1030,7 @@ void CardReader::printingHasFinished() {
// be zeroed and written instead of deleted.
void CardReader::removeJobRecoveryFile() {
if (jobRecoverFileExists()) {
recovery.init();
removeFile(job_recovery_file_name);
#if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
SERIAL_ECHOPGM("Power-loss file delete");
config/default/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/default/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/3DFabXYZ/Migbot/Configuration.h
+3
View File
@@ -933,6 +933,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/AlephObjects/TAZ4/Configuration.h
+3
View File
@@ -947,6 +947,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/AlephObjects/TAZ4/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/AliExpress/CL-260/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/AliExpress/UM2pExt/Configuration.h
+3
View File
@@ -938,6 +938,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/AliExpress/UM2pExt/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Anet/A2/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Anet/A2/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Anet/A2plus/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Anet/A2plus/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Anet/A6/Configuration.h
+3
View File
@@ -1003,6 +1003,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Anet/A6/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Anet/A8/Configuration.h
+3
View File
@@ -940,6 +940,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Anet/A8/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/AnyCubic/i3/Configuration.h
+3
View File
@@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/AnyCubic/i3/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/ArmEd/Configuration.h
+3
View File
@@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/ArmEd/Configuration_adv.h
+11
View File
@@ -911,6 +911,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Azteeg/X5GT/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BIBO/TouchX/cyclops/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/BIBO/TouchX/default/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BIBO/TouchX/default/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/BQ/Hephestos/Configuration.h
+3
View File
@@ -915,6 +915,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BQ/Hephestos/Configuration_adv.h
+11
View File
@@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/BQ/Hephestos_2/Configuration.h
+3
View File
@@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BQ/Hephestos_2/Configuration_adv.h
+11
View File
@@ -912,6 +912,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/BQ/WITBOX/Configuration.h
+3
View File
@@ -915,6 +915,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/BQ/WITBOX/Configuration_adv.h
+11
View File
@@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Cartesio/Configuration.h
+3
View File
@@ -926,6 +926,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Cartesio/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/CR-10/Configuration.h
+3
View File
@@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/CR-10/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/CR-10S/Configuration.h
+3
View File
@@ -927,6 +927,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/CR-10S/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/CR-10_5S/Configuration.h
+3
View File
@@ -928,6 +928,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/CR-10_5S/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/CR-10mini/Configuration.h
+3
View File
@@ -946,6 +946,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/CR-10mini/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/CR-8/Configuration.h
+3
View File
@@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/CR-8/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/Ender-2/Configuration.h
+3
View File
@@ -931,6 +931,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/Ender-2/Configuration_adv.h
+11
View File
@@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/Ender-3/Configuration.h
+3
View File
@@ -931,6 +931,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/Ender-3/Configuration_adv.h
+11
View File
@@ -904,6 +904,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Creality/Ender-4/Configuration.h
+3
View File
@@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Creality/Ender-4/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Einstart-S/Configuration.h
+3
View File
@@ -937,6 +937,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Einstart-S/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Felix/Configuration.h
+3
View File
@@ -909,6 +909,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/Felix/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Felix/DUAL/Configuration.h
+3
View File
@@ -909,6 +909,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/FlashForge/CreatorPro/Configuration.h
+3
View File
@@ -919,6 +919,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/FlashForge/CreatorPro/Configuration_adv.h
+11
View File
@@ -903,6 +903,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/FolgerTech/i3-2020/Configuration.h
+3
View File
@@ -933,6 +933,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
config/examples/FolgerTech/i3-2020/Configuration_adv.h
+11
View File
@@ -907,6 +907,17 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
#ifdef TARGET_LPC1768
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
#if ENABLED(LPC_SD_ONBOARD)
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
#endif
#endif
#endif // SDSUPPORT
/**
config/examples/Formbot/Raptor/Configuration.h
+3
View File
@@ -1008,6 +1008,9 @@
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
#endif
/**
* Enable one or more of the following if probing seems unreliable.
Loaded 100 of 208 files, more files were not shown because too many files have changed in this diff. Show more