Fix code attempting to sprintf %f (#14869)

Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
This commit is contained in:
Scott Lahteine 2019-08-08 01:51:37 -05:00 committed by GitHub
parent 3e5620283e
commit c8e30b6639
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 75 additions and 76 deletions

View File

@ -332,8 +332,7 @@ void PrintJobRecovery::resume() {
// Restore leveling state before 'G92 Z' to ensure
// the Z stepper count corresponds to the native Z.
if (info.fade || info.leveling) {
dtostrf(info.fade, 1, 1, str_1);
sprintf_P(cmd, PSTR("M420 S%i Z%s"), int(info.leveling), str_1);
sprintf_P(cmd, PSTR("M420 S%i Z%s"), int(info.leveling), dtostrf(info.fade, 1, 1, str_1));
gcode.process_subcommands_now(cmd);
}
#endif
@ -355,9 +354,10 @@ void PrintJobRecovery::resume() {
#endif
// Move back to the saved XY
dtostrf(info.current_position[X_AXIS], 1, 3, str_1);
dtostrf(info.current_position[Y_AXIS], 1, 3, str_2);
sprintf_P(cmd, PSTR("G1 X%s Y%s F3000"), str_1, str_2);
sprintf_P(cmd, PSTR("G1 X%s Y%s F3000"),
dtostrf(info.current_position[X_AXIS], 1, 3, str_1),
dtostrf(info.current_position[Y_AXIS], 1, 3, str_2)
);
gcode.process_subcommands_now(cmd);
// Move back to the saved Z
@ -382,8 +382,7 @@ void PrintJobRecovery::resume() {
gcode.process_subcommands_now(cmd);
// Restore E position with G92.9
dtostrf(info.current_position[E_AXIS], 1, 3, str_1);
sprintf_P(cmd, PSTR("G92.9 E%s"), str_1);
sprintf_P(cmd, PSTR("G92.9 E%s"), dtostrf(info.current_position[E_AXIS], 1, 3, str_1));
gcode.process_subcommands_now(cmd);
// Relative mode

View File

@ -252,8 +252,7 @@ void GcodeSuite::M48() {
#if HAS_SPI_LCD
// Display M48 results in the status bar
char sigma_str[8];
dtostrf(sigma, 2, 6, sigma_str);
ui.status_printf_P(0, PSTR(MSG_M48_DEVIATION ": %s"), sigma_str);
ui.status_printf_P(0, PSTR(MSG_M48_DEVIATION ": %s"), dtostrf(sigma, 2, 6, sigma_str));
#endif
}

View File

@ -101,8 +101,12 @@ void L6470_report_current(L6470 &motor, const uint8_t axis) {
#endif
sprintf_P(temp_buf, PSTR("\n...OverCurrent Threshold: %2d (%4d mA)"), overcurrent_threshold, (overcurrent_threshold + 1) * 375);
SERIAL_ECHO(temp_buf);
sprintf_P(temp_buf, PSTR(" Stall Threshold: %2d (%7.2f mA)"), stall_threshold, (stall_threshold + 1) * 31.25);
char numstr[11];
dtostrf((stall_threshold + 1) * 31.25, 1, 2, numstr);
sprintf_P(temp_buf, PSTR(" Stall Threshold: %2d (%s mA)"), stall_threshold, numstr);
SERIAL_ECHO(temp_buf);
SERIAL_ECHOPGM(" Motor Status: ");
const char * const stat_str;
switch (motor_status) {
@ -114,24 +118,42 @@ void L6470_report_current(L6470 &motor, const uint8_t axis) {
}
serialprintPGM(stat_str);
SERIAL_EOL();
SERIAL_ECHOPAIR("...microsteps: ", microsteps);
SERIAL_ECHOPAIR(" ADC_OUT: ", adc_out);
SERIAL_ECHOPGM(" Vs_compensation: ");
serialprintPGM((motor.GetParam(L6470_CONFIG) & CONFIG_EN_VSCOMP) ? PSTR("ENABLED ") : PSTR("DISABLED"));
sprintf_P(temp_buf, PSTR(" Compensation coefficient: ~%4.2f\n"), comp_coef * 0.01f);
SERIAL_ECHO(temp_buf);
SERIAL_ECHOLNPGM(" Compensation coefficient: ", dtostrf(comp_coef * 0.01f, 7, 2, numstr));
SERIAL_ECHOPAIR("...KVAL_HOLD: ", motor.GetParam(L6470_KVAL_HOLD));
SERIAL_ECHOPAIR(" KVAL_RUN : ", motor.GetParam(L6470_KVAL_RUN));
SERIAL_ECHOPAIR(" KVAL_ACC: ", motor.GetParam(L6470_KVAL_ACC));
SERIAL_ECHOPAIR(" KVAL_DEC: ", motor.GetParam(L6470_KVAL_DEC));
SERIAL_ECHOPGM(" V motor max = ");
float val;
PGM_P suf;
switch (motor_status) {
case 0: sprintf_P(temp_buf, PSTR(" %4.1f%% (KVAL_HOLD)\n"), float(motor.GetParam(L6470_KVAL_HOLD)) * 100 / 256); break;
case 1: sprintf_P(temp_buf, PSTR(" %4.1f%% (KVAL_RUN) \n"), float(motor.GetParam(L6470_KVAL_RUN)) * 100 / 256); break;
case 2: sprintf_P(temp_buf, PSTR(" %4.1f%% (KVAL_ACC) \n"), float(motor.GetParam(L6470_KVAL_ACC)) * 100 / 256); break;
case 3: sprintf_P(temp_buf, PSTR(" %4.1f%% (KVAL_DEC) \n"), float(motor.GetParam(L6470_KVAL_DEC)) * 100 / 256); break;
case 0:
val = motor.GetParam(L6470_KVAL_HOLD);
suf = PSTR("(KVAL_HOLD)");
break;
case 1:
val = motor.GetParam(L6470_KVAL_RUN);
suf = PSTR("(KVAL_RUN)");
break;
case 2:
val = motor.GetParam(L6470_KVAL_ACC);
suf = PSTR("(KVAL_ACC)");
break;
case 3:
val = motor.GetParam(L6470_KVAL_DEC);
suf = PSTR("(KVAL_DEC)");
break;
}
SERIAL_ECHO(temp_buf);
SERIAL_ECHO(dtostrf(val * 100 / 256, 10, 2, numstr));
SERIAL_ECHO("%% ");
serialprintPGM(suf);
SERIAL_EOL();
}
void GcodeSuite::M906() {
@ -150,7 +172,7 @@ void GcodeSuite::M906() {
report_current = false;
if (planner.has_blocks_queued() || planner.cleaning_buffer_counter) {
SERIAL_ECHOLNPGM("ERROR - can't set KVAL_HOLD while steppers are moving");
SERIAL_ECHOLNPGM("!Can't set KVAL_HOLD with steppers moving");
return;
}

View File

@ -32,6 +32,19 @@
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../../core/debug_out.h"
static void jiggle_axis(const char axis_char, const float &min, const float &max, const float &rate) {
char gcode_string[30], str1[11], str2[11];
// Turn the motor(s) both directions
sprintf_P(gcode_string, PSTR("G0 %c%s F%s"), axis_char, dtostrf(min, 1, 3, str1), dtostrf(rate, 1, 3, str2));
process_subcommands_now(gcode_string);
sprintf_P(gcode_string, PSTR("G0 %c%s F%s"), axis_char, dtostrf(max, 1, 3, str1), str2);
process_subcommands_now(gcode_string);
planner.synchronize();
}
/**
*
* M916: Increase KVAL_HOLD until thermal warning
@ -85,14 +98,11 @@ void GcodeSuite::M916() {
DEBUG_ECHOLNPAIR("feedrate = ", final_feedrate);
planner.synchronize(); // wait for all current movement commands to complete
planner.synchronize(); // Wait for moves to finish
for (j = 0; j < driver_count; j++)
L6470.get_status(axis_index[j]); // clear out any pre-existing error flags
L6470.get_status(axis_index[j]); // Clear out error flags
char temp_axis_string[] = " ";
temp_axis_string[0] = axis_mon[0][0]; // need to have a string for use within sprintf format section
char gcode_string[80];
uint16_t status_composite = 0;
DEBUG_ECHOLNPGM(".\n.");
@ -104,15 +114,8 @@ void GcodeSuite::M916() {
for (j = 0; j < driver_count; j++)
L6470.set_param(axis_index[j], L6470_KVAL_HOLD, kval_hold);
// turn the motor(s) both directions
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_min, final_feedrate);
process_subcommands_now(gcode_string);
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_max, final_feedrate);
process_subcommands_now(gcode_string);
// get the status after the motors have stopped
planner.synchronize();
// Turn the motor(s) both directions
jiggle_axis(axis_mon[0][0], position_min, position_max, final_feedrate);
status_composite = 0; // clear out the old bits
@ -201,12 +204,9 @@ void GcodeSuite::M917() {
DEBUG_ECHOLNPAIR("feedrate = ", final_feedrate);
planner.synchronize(); // wait for all current movement commands to complete
planner.synchronize(); // Wait for moves to finish
for (j = 0; j < driver_count; j++)
L6470.get_status(axis_index[j]); // clear out any pre-existing error flags
char temp_axis_string[] = " ";
temp_axis_string[0] = axis_mon[0][0]; // need to have a string for use within sprintf format section
char gcode_string[80];
L6470.get_status(axis_index[j]); // Clear out error flags
uint16_t status_composite = 0;
uint8_t test_phase = 0;
// 0 - decreasing OCD - exit when OCD warning occurs (ignore STALL)
@ -225,13 +225,7 @@ void GcodeSuite::M917() {
DEBUG_ECHOPAIR("STALL threshold : ", (stall_th_val + 1) * 31.25);
DEBUG_ECHOLNPAIR(" OCD threshold : ", (ocd_th_val + 1) * 375);
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_min, final_feedrate);
process_subcommands_now(gcode_string);
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_max, final_feedrate);
process_subcommands_now(gcode_string);
planner.synchronize();
jiggle_axis(axis_mon[0][0], position_min, position_max, final_feedrate);
status_composite = 0; // clear out the old bits
@ -500,30 +494,19 @@ void GcodeSuite::M918() {
float feedrate_inc = final_feedrate / 10, // start at 1/10 of max & go up by 1/10 per step)
current_feedrate = 0;
planner.synchronize(); // wait for all current movement commands to complete
planner.synchronize(); // Wait for moves to finish
for (j = 0; j < driver_count; j++)
L6470.get_status(axis_index[j]); // clear all error flags
L6470.get_status(axis_index[j]); // Clear all error flags
char temp_axis_string[2];
temp_axis_string[0] = axis_mon[0][0]; // need to have a string for use within sprintf format section
temp_axis_string[1] = '\n';
char gcode_string[80];
uint16_t status_composite = 0;
DEBUG_ECHOLNPGM(".\n.\n."); // make the feedrate prints easier to see
DEBUG_ECHOLNPGM(".\n.\n."); // Make the feedrate prints easier to see
do {
current_feedrate += feedrate_inc;
DEBUG_ECHOLNPAIR("...feedrate = ", current_feedrate);
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_min, current_feedrate);
process_subcommands_now(gcode_string);
sprintf_P(gcode_string, PSTR("G0 %s%4.3f F%4.3f"), temp_axis_string, position_max, current_feedrate);
process_subcommands_now(gcode_string);
planner.synchronize();
jiggle_axis(axis_mon[0][0], position_min, position_max, current_feedrate);
for (j = 0; j < driver_count; j++) {
axis_status[j] = (~L6470.get_status(axis_index[j])) & 0x0800; // bits of interest are all active low

View File

@ -42,7 +42,7 @@
SERIAL_CHAR(' ');
SERIAL_CHAR(axis_codes[i]);
SERIAL_CHAR(':');
SERIAL_ECHO(dtostrf(pos[i], 8, precision, str));
SERIAL_ECHO(dtostrf(pos[i], 1, precision, str));
}
SERIAL_EOL();
}

View File

@ -666,17 +666,14 @@ void ST7920_Lite_Status_Screen::draw_position(const float x, const float y, cons
// If position is unknown, flash the labels.
const unsigned char alt_label = position_known ? 0 : (ui.get_blink() ? ' ' : 0);
dtostrf(x, -4, 0, str);
write_byte(alt_label ? alt_label : 'X');
write_str(str, 4);
write_str(dtostrf(x, -4, 0, str), 4);
dtostrf(y, -4, 0, str);
write_byte(alt_label ? alt_label : 'Y');
write_str(str, 4);
write_str(dtostrf(y, -4, 0, str), 4);
dtostrf(z, -5, 1, str);
write_byte(alt_label ? alt_label : 'Z');
write_str(str, 5);
write_str(dtostrf(z, -5, 1, str), 5);
}
bool ST7920_Lite_Status_Screen::indicators_changed() {

View File

@ -146,10 +146,10 @@ void process_lcd_eb_command(const char* command) {
char message_buffer[MAX_CURLY_COMMAND];
sprintf_P(message_buffer,
PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}{TQ:%03i}{TT:%s}"),
thermalManager.degHotend(0), thermalManager.degTargetHotend(0),
PSTR("{T0:%03i/%03i}{T1:000/000}{TP:%03i/%03i}{TQ:%03i}{TT:%s}"),
int(thermalManager.degHotend(0)), thermalManager.degTargetHotend(0),
#if HAS_HEATED_BED
thermalManager.degBed(), thermalManager.degTargetBed(),
int(thermalManager.degBed()), thermalManager.degTargetBed(),
#else
0, 0,
#endif
@ -199,8 +199,8 @@ void process_lcd_j_command(const char* command) {
case 'X': {
// G0 <AXIS><distance>
// The M200 class UI seems to send movement in .1mm values.
char cmd[20];
sprintf_P(cmd, PSTR("G1 %c%03.1f"), axis, atof(command + 1) / 10.0);
char cmd[20], pos[6];
sprintf_P(cmd, PSTR("G1 %c%s"), axis, dtostrf(atof(command + 1) / 10.0, -5, 3, pos));
queue.enqueue_one_now(cmd);
} break;
default:
@ -305,10 +305,10 @@ void process_lcd_s_command(const char* command) {
case 'I': {
// temperature information
char message_buffer[MAX_CURLY_COMMAND];
sprintf_P(message_buffer, PSTR("{T0:%03.0f/%03i}{T1:000/000}{TP:%03.0f/%03i}"),
thermalManager.degHotend(0), thermalManager.degTargetHotend(0),
sprintf_P(message_buffer, PSTR("{T0:%03i/%03i}{T1:000/000}{TP:%03i/%03i}"),
int(thermalManager.degHotend(0)), thermalManager.degTargetHotend(0),
#if HAS_HEATED_BED
thermalManager.degBed(), thermalManager.degTargetBed()
int(thermalManager.degBed()), thermalManager.degTargetBed()
#else
0, 0
#endif

View File

@ -285,8 +285,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int
// Determine digits needed right of decimal
const uint8_t digs = !UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 1000 - int((SHORT_MANUAL_Z_MOVE) * 1000)) ? 4 :
!UNEAR_ZERO((SHORT_MANUAL_Z_MOVE) * 100 - int((SHORT_MANUAL_Z_MOVE) * 100)) ? 3 : 2;
dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr);
sprintf_P(tmp, PSTR(MSG_MOVE_Z_DIST), numstr);
sprintf_P(tmp, PSTR(MSG_MOVE_Z_DIST), dtostrf(SHORT_MANUAL_Z_MOVE, 1, digs, numstr));
LCDPRINT(tmp);
MENU_ITEM_ADDON_END();
}