bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA

Browse Source
This commit is contained in:
Scott Lahteine 2019-04-08 17:52:33 -05:00
parent 9abe9aff56
commit c8a83fb122
51 changed files with 90 additions and 88 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Marlin/src/HAL/HAL_AVR/SanityCheck.h
View File

@ -46,8 +46,8 @@
* Sanity checks for Spindle / Laser
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_LINUX/SanityCheck.h
View File

@ -25,8 +25,8 @@
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_LPC1768/SanityCheck.h
View File

@ -25,8 +25,8 @@
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_STM32/SanityCheck.h
View File

@ -25,8 +25,8 @@
* Test Re-ARM specific configuration values for errors at compile-time.
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
View File

@ -28,8 +28,8 @@
* Test Re-ARM specific configuration values for errors at compile-time.
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_STM32F4/SanityCheck.h
View File

@ -24,8 +24,8 @@
* Test Re-ARM specific configuration values for errors at compile-time.
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

4
Marlin/src/HAL/HAL_STM32F7/SanityCheck.h
View File

@ -24,8 +24,8 @@
* Test Re-ARM specific configuration values for errors at compile-time.
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#if !PIN_EXISTS(SPINDLE_LASER_ENA)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENA_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)

2
Marlin/src/Marlin.cpp
View File

@ -975,7 +975,7 @@ void setup() {
#endif
#if ENABLED(SPINDLE_LASER_ENABLE)
OUT_WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off
OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off
#if SPINDLE_DIR_CHANGE
OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0); // init rotation to clockwise (M3)
#endif

12
Marlin/src/gcode/control/M3-M5.cpp
View File

@ -53,7 +53,7 @@ uint8_t spindle_laser_power; // = 0
* NOTE: A minimum PWM frequency of 50 Hz is needed. All prescaler
* factors for timers 2, 3, 4, and 5 are acceptable.
*
* SPINDLE_LASER_ENABLE_PIN needs an external pullup or it may power on
* SPINDLE_LASER_ENA_PIN needs an external pullup or it may power on
* the spindle/laser during power-up or when connecting to the host
* (usually goes through a reset which sets all I/O pins to tri-state)
*
@ -73,7 +73,7 @@ inline void delay_for_power_down() { safe_delay(SPINDLE_LASER_POWERDOWN_DELAY);
*/
inline void set_spindle_laser_ocr(const uint8_t ocr) {
WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT); // turn spindle on (active low)
analogWrite(SPINDLE_LASER_PWM_PIN, (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
}
@ -81,7 +81,7 @@ inline void set_spindle_laser_ocr(const uint8_t ocr) {
void update_spindle_laser_power() {
if (spindle_laser_power == 0) {
WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off (active low)
WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT); // turn spindle off (active low)
analogWrite(SPINDLE_LASER_PWM_PIN, SPINDLE_LASER_PWM_INVERT ? 255 : 0); // only write low byte
delay_for_power_down();
}
@ -101,7 +101,7 @@ inline void set_spindle_laser_ocr(const uint8_t ocr) {
#endif // SPINDLE_LASER_PWM
bool spindle_laser_enabled() {
return !!spindle_laser_power; // READ(SPINDLE_LASER_ENABLE_PIN) == SPINDLE_LASER_ENABLE_INVERT;
return !!spindle_laser_power; // READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ENABLE_INVERT;
}
void set_spindle_laser_enabled(const bool enable) {
@ -111,11 +111,11 @@ void set_spindle_laser_enabled(const bool enable) {
update_spindle_laser_power();
#else
if (enable) {
WRITE(SPINDLE_LASER_ENABLE_PIN, SPINDLE_LASER_ENABLE_INVERT);
WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ENABLE_INVERT);
delay_for_power_up();
}
else {
WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT);
WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ENABLE_INVERT);
delay_for_power_down();
}
#endif

2
Marlin/src/inc/SanityCheck.h
View File

@ -341,6 +341,8 @@
#error "MAX6675_SS is now MAX6675_SS_PIN. Please update your configuration and/or pins."
#elif defined(MAX6675_SS2)
#error "MAX6675_SS2 is now MAX6675_SS2_PIN. Please update your configuration and/or pins."
#elif defined(SPINDLE_LASER_ENABLE_PIN)
#error "SPINDLE_LASER_ENABLE_PIN is now SPINDLE_LASER_ENA_PIN. Please update your configuration and/or pins."
#elif defined(TMC_Z_CALIBRATION)
#error "TMC_Z_CALIBRATION has been deprecated in favor of Z_STEPPER_AUTO_ALIGN. Please update your configuration."
#elif defined(Z_MIN_PROBE_ENDSTOP)

4
Marlin/src/pins/pinsDebug_list.h
View File

@ -788,8 +788,8 @@
#if PIN_EXISTS(SPINDLE_ENABLE)
REPORT_NAME_DIGITAL(__LINE__, SPINDLE_ENABLE_PIN)
#endif
#if PIN_EXISTS(SPINDLE_LASER_ENABLE)
REPORT_NAME_DIGITAL(__LINE__, SPINDLE_LASER_ENABLE_PIN)
#if PIN_EXISTS(SPINDLE_LASER_ENA)
REPORT_NAME_DIGITAL(__LINE__, SPINDLE_LASER_ENA_PIN)
#endif
#if PIN_EXISTS(SPINDLE_LASER_PWM)
REPORT_NAME_DIGITAL(__LINE__, SPINDLE_LASER_PWM_PIN)

8
Marlin/src/pins/pins_3DRAG.h
View File

@ -124,7 +124,7 @@
*
* stepper signal socket name socket name
* -------
* SPINDLE_LASER_ENABLE_PIN /ENABLE O| |O VMOT
* SPINDLE_LASER_ENA_PIN /ENABLE O| |O VMOT
* MS1 O| |O GND
* MS2 O| |O 2B
* MS3 O| |O 2A
@ -137,7 +137,7 @@
* Note: Socket names vary from vendor to vendor
*/
#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG
#undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
#if ENABLED(SPINDLE_LASER_ENABLE)
@ -152,10 +152,10 @@
#define Z_ENABLE_PIN 24
#define Z_STEP_PIN 26
#define SPINDLE_LASER_PWM_PIN 46 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 62 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 62 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 48
#elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use
#define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 16 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 17
#endif
#endif

4
Marlin/src/pins/pins_AZTEEG_X3.h
View File

@ -83,7 +83,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board
#undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
#if ENABLED(SPINDLE_LASER_ENABLE)
@ -94,6 +94,6 @@
#define SERVO0_PIN 11
#endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 21
#endif

4
Marlin/src/pins/pins_AZTEEG_X3_PRO.h
View File

@ -162,7 +162,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board
#undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN
#if ENABLED(SPINDLE_LASER_ENABLE) // EXP2 header
@ -171,6 +171,6 @@
#define BTN_EN2 31 // need 7 for the spindle speed PWM
#endif
#define SPINDLE_LASER_PWM_PIN 7 // must have a hardware PWM
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 21
#endif

2
Marlin/src/pins/pins_BAM_DICE_DUE.h
View File

@ -33,7 +33,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 66 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 66 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 67
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM

2
Marlin/src/pins/pins_BQ_ZUM_MEGA_3D.h
View File

@ -49,7 +49,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 42

2
Marlin/src/pins/pins_COHESION3D_MINI.h
View File

@ -118,7 +118,7 @@
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN

2
Marlin/src/pins/pins_COHESION3D_REMIX.h
View File

@ -139,7 +139,7 @@
//
#if ENABLED(SPINDLE_LASER_ENABLE)
#undef HEATER_0_PIN
#define SPINDLE_LASER_ENABLE_PIN P2_07 // FET 1
#define SPINDLE_LASER_ENA_PIN P2_07 // FET 1
#undef HEATER_BED_PIN
#define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET
#undef FAN_PIN

2
Marlin/src/pins/pins_EINSY_RAMBO.h
View File

@ -135,7 +135,7 @@
//
// use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19
//

2
Marlin/src/pins/pins_EINSY_RETRO.h
View File

@ -149,7 +149,7 @@
//
// use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19
//

2
Marlin/src/pins/pins_FELIX2.h
View File

@ -59,5 +59,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board
#undef SPINDLE_LASER_ENABLE_PIN
#undef SPINDLE_LASER_ENA_PIN
#undef SPINDLE_DIR_PIN

8
Marlin/src/pins/pins_FORMBOT_RAPTOR2.h
View File

@ -40,13 +40,13 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !NUM_SERVOS // Try to use servo connector first
#define SPINDLE_LASER_ENABLE_PIN 6 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 6 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5
#elif !GREEDY_PANEL // Try to use AUX2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65
#endif
@ -62,6 +62,6 @@
#undef GREEDY_PANEL
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && (CASE_LIGHT_PIN == SPINDLE_LASER_ENABLE_PIN || CASE_LIGHT_PIN == SPINDLE_LASER_PWM_PIN)
#if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && (CASE_LIGHT_PIN == SPINDLE_LASER_ENA_PIN || CASE_LIGHT_PIN == SPINDLE_LASER_PWM_PIN)
#error "CASE_LIGHT_PIN conflicts with a Spindle / Laser pin."
#endif

2
Marlin/src/pins/pins_FORMBOT_TREX3.h
View File

@ -144,7 +144,7 @@
#endif
#define SPINDLE_LASER_PWM_PIN 7 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup!
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5 // Analog Input

2
Marlin/src/pins/pins_GEN6.h
View File

@ -114,6 +114,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 6

2
Marlin/src/pins/pins_GEN7_12.h
View File

@ -140,7 +140,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_DIR_PIN 11
#if GEN7_VERSION < 13
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM

2
Marlin/src/pins/pins_GEN7_14.h
View File

@ -113,6 +113,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 20 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 20 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 21

2
Marlin/src/pins/pins_GEN7_CUSTOM.h
View File

@ -133,6 +133,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 5 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 16 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 6

2
Marlin/src/pins/pins_MEGACONTROLLER.h
View File

@ -161,5 +161,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 7 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 7 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 8

2
Marlin/src/pins/pins_MEGATRONICS.h
View File

@ -126,5 +126,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11

2
Marlin/src/pins/pins_MEGATRONICS_2.h
View File

@ -141,5 +141,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 3 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 16 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 16 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11

4
Marlin/src/pins/pins_MEGATRONICS_3.h
View File

@ -174,7 +174,7 @@
//
#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 43 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 43 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 42
#elif EXTRUDERS <= 2
// Hijack the last extruder so that we can get the PWM signal off the Y breakout
@ -189,6 +189,6 @@
#define Y_STEP_PIN 22
#define Y_DIR_PIN 60
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 5
#endif

2
Marlin/src/pins/pins_MIGHTYBOARD_REVE.h
View File

@ -263,7 +263,7 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 66 // K4 Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 66 // K4 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 8 // H5 MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 67 // K5

2
Marlin/src/pins/pins_MINIRAMBO.h
View File

@ -125,7 +125,7 @@
//
// use P1 connector for spindle pins
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 18 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 18 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19
//

2
Marlin/src/pins/pins_MINITRONICS.h
View File

@ -138,7 +138,7 @@
#define HEATER_BED_PIN 4 // won't compile
#define TEMP_BED_PIN 50
#define TEMP_0_PIN 51
#define SPINDLE_LASER_ENABLE_PIN 52 // using A6 because it already has a pullup
#define SPINDLE_LASER_ENA_PIN 52 // using A6 because it already has a pullup
#define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage
#define SPINDLE_DIR_PIN 53
#endif

2
Marlin/src/pins/pins_MKS_BASE.h
View File

@ -44,7 +44,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 15 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 19
#include "pins_RAMPS.h"

2
Marlin/src/pins/pins_MKS_BASE_14.h
View File

@ -47,7 +47,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
//

2
Marlin/src/pins/pins_RAMBO.h
View File

@ -149,7 +149,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 31 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 31 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 32
//

8
Marlin/src/pins/pins_RAMPS.h
View File

@ -231,7 +231,7 @@
#define PS_ON_PIN 12
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
@ -242,13 +242,13 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65
#endif

4
Marlin/src/pins/pins_RAMPS_FD_V1.h
View File

@ -198,9 +198,9 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if HOTENDS < 3
#define SPINDLE_LASER_ENABLE_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA
#define SPINDLE_LASER_PWM_PIN 12 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 47 // Use E2 DIR
#endif

8
Marlin/src/pins/pins_RAMPS_LINUX.h
View File

@ -217,7 +217,7 @@
#define PS_ON_PIN 12
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // try to use servo connector first
#define CASE_LIGHT_PIN 6 // MUST BE HARDWARE PWM
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
@ -228,13 +228,13 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // try to use servo connector first
#define SPINDLE_LASER_ENABLE_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 4 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 5
#elif !(BOTH(ULTRA_LCD, NEWPANEL) && ANY(PANEL_ONE, VIKI2, miniVIKI, MINIPANEL, REPRAPWORLD_KEYPAD)) // try to use AUX 2
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 44 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 65
#endif

2
Marlin/src/pins/pins_RAMPS_OLD.h
View File

@ -110,6 +110,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 43

6
Marlin/src/pins/pins_RAMPS_RE_ARM.h
View File

@ -200,7 +200,7 @@
#define MAX6675_SS_PIN P1_28
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN)
#if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENA_PIN)
#if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector
#define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM
#endif
@ -210,11 +210,11 @@
// M3/M4/M5 - Spindle/Laser Control
// Use servo pins, if available
//
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENA)
#if NUM_SERVOS > 1
#error "SPINDLE_LASER_ENABLE requires 3 free servo pins."
#endif
#define SPINDLE_LASER_ENABLE_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN SERVO2_PIN // (5)
#endif

4
Marlin/src/pins/pins_RUMBA.h
View File

@ -157,8 +157,8 @@
#ifndef SPINDLE_LASER_PWM_PIN
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
#endif
#ifndef SPINDLE_LASER_ENABLE_PIN
#define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup!
#ifndef SPINDLE_LASER_ENA_PIN
#define SPINDLE_LASER_ENA_PIN 14 // Pin should have a pullup!
#endif
#ifndef SPINDLE_DIR_PIN
#define SPINDLE_DIR_PIN 15

6
Marlin/src/pins/pins_SANGUINOLOLU_11.h
View File

@ -279,7 +279,7 @@
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup/pulldown!
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 11
@ -307,7 +307,7 @@
* /RESET O| |O 1A
* /SLEEP O| |O 1B
* SPINDLE_LASER_PWM_PIN STEP O| |O VDD
* SPINDLE_LASER_ENABLE_PIN DIR O| |O GND
* SPINDLE_LASER_ENA_PIN DIR O| |O GND
* -------
*
* Note: Socket names vary from vendor to vendor.
@ -319,7 +319,7 @@
#define X_ENABLE_PIN 14
#define X_STEP_PIN 1
#define SPINDLE_LASER_PWM_PIN 15 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 21 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 21 // Pin should have a pullup!
#define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin
#endif
#endif // SPINDLE_LASER_ENABLE

2
Marlin/src/pins/pins_SAV_MKI.h
View File

@ -176,7 +176,7 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A
#define SPINDLE_LASER_ENABLE_PIN 39 // F1 Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 39 // F1 Pin should have a pullup!
#define SPINDLE_DIR_PIN 40 // F2
#define CASE_LIGHT_PIN 0 // D0 PWM0B

2
Marlin/src/pins/pins_STM3R_MINI.h
View File

@ -108,7 +108,7 @@
// Laser control
#if ENABLED(SPINDLE_LASER_ENABLE)
#define SPINDLE_LASER_PWM_PIN PB8
#define SPINDLE_LASER_ENABLE_PIN PD5
#define SPINDLE_LASER_ENA_PIN PD5
#endif
//

2
Marlin/src/pins/pins_TEENSY2.h
View File

@ -179,6 +179,6 @@
//
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_ENABLE_PIN 5 // D5 Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 5 // D5 Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM
#define SPINDLE_DIR_PIN 7 // D7

2
Marlin/src/pins/pins_TEENSYLU.h
View File

@ -159,5 +159,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 39 // F1 IO-11 - Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 39 // F1 IO-11 - Pin should have a pullup!
#define SPINDLE_DIR_PIN 40 // F2 IO-9

2
Marlin/src/pins/pins_ULTIMAIN_2.h
View File

@ -131,7 +131,7 @@
#if ENABLED(SPINDLE_LASER_ENABLE) // use the LED_PIN for spindle speed control or case light
#undef LED_PIN
#define SPINDLE_DIR_PIN 16
#define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 17 // Pin should have a pullup!
#define SPINDLE_LASER_PWM_PIN 8 // MUST BE HARDWARE PWM
#else
#undef LED_PIN

2
Marlin/src/pins/pins_ULTIMAKER.h
View File

@ -160,5 +160,5 @@
// M3/M4/M5 - Spindle/Laser Control
//
#define SPINDLE_LASER_PWM_PIN 9 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 10 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 10 // Pin should have a pullup!
#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header

10
Marlin/src/pins/pins_ULTIMAKER_OLD.h
View File

@ -221,13 +221,13 @@
#define SPINDLE_DIR_PIN 10 // SW4
#define SPINDLE_LASER_PWM_PIN 9 // SW5 MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 8 // SW6 Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 8 // SW6 Pin should have a pullup!
#elif ENABLED(board_rev_1_5) // use the same pins - but now they are on a different connector
#define SPINDLE_DIR_PIN 10 // EXP3-6 (silkscreen says 10)
#define SPINDLE_LASER_PWM_PIN 9 // EXP3-7 (silkscreen says 9) MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 8 // EXP3-8 (silkscreen says 8) Pin should have a pullup!
#elif ENABLED(board_rev_1_1_TO_1_3)
@ -251,12 +251,12 @@
#define E0_ENABLE_PIN 48
#define SPINDLE_DIR_PIN 43
#define SPINDLE_LASER_PWM_PIN 45 // MUST BE HARDWARE PWM
#define SPINDLE_LASER_ENABLE_PIN 41 // Pin should have a pullup!
#define SPINDLE_LASER_ENA_PIN 41 // Pin should have a pullup!
#elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available
#undef HEATER_BED_PIN
#define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM - Special precautions usually needed.
#define SPINDLE_LASER_ENABLE_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin
#define SPINDLE_LASER_ENA_PIN 40 // Pin should have a pullup! (Probably pin 6 on the 10-pin
// connector closest to the E0 socket)
#endif
#endif
@ -267,7 +267,7 @@
*
* spindle signal socket name socket name
* -------
* SPINDLE_LASER_ENABLE_PIN /ENABLE *| |O VMOT
* SPINDLE_LASER_ENA_PIN /ENABLE *| |O VMOT
* MS1 O| |O GND
* MS2 O| |O 2B
* MS3 O| |O 2A