bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

zprobe_offset => probe_offset

Browse Source
This commit is contained in:
Scott Lahteine
2019-09-24 23:35:49 -05:00
parent 3819f79945
commit 4e8d9fe59b
20 changed files with 79 additions and 79 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
Marlin/src/core/utility.cpp
View File

@@ -79,36 +79,36 @@ void safe_delay(millis_t ms) {
);
#if HAS_BED_PROBE
SERIAL_ECHOPAIR("Probe Offset X:", zprobe_offset[X_AXIS], " Y:", zprobe_offset[Y_AXIS], " Z:", zprobe_offset[Z_AXIS]);
if (zprobe_offset[X_AXIS] > 0)
SERIAL_ECHOPAIR("Probe Offset X:", probe_offset[X_AXIS], " Y:", probe_offset[Y_AXIS], " Z:", probe_offset[Z_AXIS]);
if (probe_offset[X_AXIS] > 0)
SERIAL_ECHOPGM(" (Right");
else if (zprobe_offset[X_AXIS] < 0)
else if (probe_offset[X_AXIS] < 0)
SERIAL_ECHOPGM(" (Left");
else if (zprobe_offset[Y_AXIS] != 0)
else if (probe_offset[Y_AXIS] != 0)
SERIAL_ECHOPGM(" (Middle");
else
SERIAL_ECHOPGM(" (Aligned With");
if (zprobe_offset[Y_AXIS] > 0) {
if (probe_offset[Y_AXIS] > 0) {
#if IS_SCARA
SERIAL_ECHOPGM("-Distal");
#else
SERIAL_ECHOPGM("-Back");
#endif
}
else if (zprobe_offset[Y_AXIS] < 0) {
else if (probe_offset[Y_AXIS] < 0) {
#if IS_SCARA
SERIAL_ECHOPGM("-Proximal");
#else
SERIAL_ECHOPGM("-Front");
#endif
}
else if (zprobe_offset[X_AXIS] != 0)
else if (probe_offset[X_AXIS] != 0)
SERIAL_ECHOPGM("-Center");
if (zprobe_offset[Z_AXIS] < 0)
if (probe_offset[Z_AXIS] < 0)
SERIAL_ECHOPGM(" & Below");
else if (zprobe_offset[Z_AXIS] > 0)
else if (probe_offset[Z_AXIS] > 0)
SERIAL_ECHOPGM(" & Above");
else
SERIAL_ECHOPGM(" & Same Z as");

4
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View File

@@ -180,8 +180,8 @@
// Add XY probe offset from extruder because probe_pt() subtracts them when
// moving to the xy position to be measured. This ensures better agreement between
// the current Z position after G28 and the mesh values.
const float current_xi = find_closest_x_index(current_position[X_AXIS] + zprobe_offset[X_AXIS]),
current_yi = find_closest_y_index(current_position[Y_AXIS] + zprobe_offset[Y_AXIS]);
const float current_xi = find_closest_x_index(current_position[X_AXIS] + probe_offset[X_AXIS]),
current_yi = find_closest_y_index(current_position[Y_AXIS] + probe_offset[Y_AXIS]);
if (!lcd) SERIAL_EOL();
for (int8_t j = GRID_MAX_POINTS_Y - 1; j >= 0; j--) {

18
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View File

@@ -453,7 +453,7 @@
SERIAL_ECHO(g29_y_pos);
SERIAL_ECHOLNPGM(").\n");
}
probe_entire_mesh(g29_x_pos + zprobe_offset[X_AXIS], g29_y_pos + zprobe_offset[Y_AXIS],
probe_entire_mesh(g29_x_pos + probe_offset[X_AXIS], g29_y_pos + probe_offset[Y_AXIS],
parser.seen('T'), parser.seen('E'), parser.seen('U'));
report_current_position();
@@ -482,8 +482,8 @@
g29_x_pos = X_HOME_POS;
g29_y_pos = Y_HOME_POS;
#else // cartesian
g29_x_pos = zprobe_offset[X_AXIS] > 0 ? X_BED_SIZE : 0;
g29_y_pos = zprobe_offset[Y_AXIS] < 0 ? Y_BED_SIZE : 0;
g29_x_pos = probe_offset[X_AXIS] > 0 ? X_BED_SIZE : 0;
g29_y_pos = probe_offset[Y_AXIS] < 0 ? Y_BED_SIZE : 0;
#endif
}
@@ -800,8 +800,8 @@
restore_ubl_active_state_and_leave();
do_blocking_move_to_xy(
constrain(rx - zprobe_offset[X_AXIS], MESH_MIN_X, MESH_MAX_X),
constrain(ry - zprobe_offset[Y_AXIS], MESH_MIN_Y, MESH_MAX_Y)
constrain(rx - probe_offset[X_AXIS], MESH_MIN_X, MESH_MAX_X),
constrain(ry - probe_offset[Y_AXIS], MESH_MIN_Y, MESH_MAX_Y)
);
}
@@ -1281,8 +1281,8 @@
out_mesh.distance = -99999.9f;
// Get our reference position. Either the nozzle or probe location.
const float px = rx + (probe_as_reference == USE_PROBE_AS_REFERENCE ? zprobe_offset[X_AXIS] : 0),
py = ry + (probe_as_reference == USE_PROBE_AS_REFERENCE ? zprobe_offset[Y_AXIS] : 0);
const float px = rx + (probe_as_reference == USE_PROBE_AS_REFERENCE ? probe_offset[X_AXIS] : 0),
py = ry + (probe_as_reference == USE_PROBE_AS_REFERENCE ? probe_offset[Y_AXIS] : 0);
float best_so_far = 99999.99f;
@@ -1500,7 +1500,7 @@
DEBUG_ECHOPAIR_F(" correction: ", get_z_correction(rx, ry), 7);
}
measured_z -= get_z_correction(rx, ry) /* + zprobe_offset[Z_AXIS] */ ;
measured_z -= get_z_correction(rx, ry) /* + probe_offset[Z_AXIS] */ ;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR_F(" final >>>---> ", measured_z, 7);
@@ -1712,7 +1712,7 @@
adjust_mesh_to_mean(g29_c_flag, g29_constant);
#if HAS_BED_PROBE
SERIAL_ECHOLNPAIR_F("Probe Offset M851 Z", zprobe_offset[Z_AXIS], 7);
SERIAL_ECHOLNPAIR_F("Probe Offset M851 Z", probe_offset[Z_AXIS], 7);
#endif
SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); serial_delay(50);

4
Marlin/src/gcode/bedlevel/G42.cpp
View File

@@ -49,8 +49,8 @@ void GcodeSuite::G42() {
if (hasJ) destination[Y_AXIS] = _GET_MESH_Y(iy);
#if HAS_BED_PROBE
if (parser.boolval('P')) {
if (hasI) destination[X_AXIS] -= zprobe_offset[X_AXIS];
if (hasJ) destination[Y_AXIS] -= zprobe_offset[Y_AXIS];
if (hasI) destination[X_AXIS] -= probe_offset[X_AXIS];
if (hasJ) destination[Y_AXIS] -= probe_offset[Y_AXIS];
}
#endif

4
Marlin/src/gcode/bedlevel/abl/G29.cpp
View File

@@ -947,8 +947,8 @@ G29_TYPE GcodeSuite::G29() {
planner.leveling_active = false;
// Use the last measured distance to the bed, if possible
if ( NEAR(current_position[X_AXIS], xProbe - zprobe_offset[X_AXIS])
&& NEAR(current_position[Y_AXIS], yProbe - zprobe_offset[Y_AXIS])
if ( NEAR(current_position[X_AXIS], xProbe - probe_offset[X_AXIS])
&& NEAR(current_position[Y_AXIS], yProbe - probe_offset[Y_AXIS])
) {
const float simple_z = current_position[Z_AXIS] - measured_z;
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Probed Z", simple_z, " Matrix Z", converted[Z_AXIS], " Discrepancy ", simple_z - converted[Z_AXIS]);

4
Marlin/src/gcode/calibrate/G28.cpp
View File

@@ -136,8 +136,8 @@
destination[Z_AXIS] = current_position[Z_AXIS]; // Z is already at the right height
#if HOMING_Z_WITH_PROBE
destination[X_AXIS] -= zprobe_offset[X_AXIS];
destination[Y_AXIS] -= zprobe_offset[Y_AXIS];
destination[X_AXIS] -= probe_offset[X_AXIS];
destination[Y_AXIS] -= probe_offset[Y_AXIS];
#endif
if (position_is_reachable(destination[X_AXIS], destination[Y_AXIS])) {

8
Marlin/src/gcode/calibrate/M48.cpp
View File

@@ -77,8 +77,8 @@ void GcodeSuite::M48() {
float X_current = current_position[X_AXIS],
Y_current = current_position[Y_AXIS];
const float X_probe_location = parser.linearval('X', X_current + zprobe_offset[X_AXIS]),
Y_probe_location = parser.linearval('Y', Y_current + zprobe_offset[Y_AXIS]);
const float X_probe_location = parser.linearval('X', X_current + probe_offset[X_AXIS]),
Y_probe_location = parser.linearval('Y', Y_current + probe_offset[Y_AXIS]);
if (!position_is_reachable_by_probe(X_probe_location, Y_probe_location)) {
SERIAL_ECHOLNPGM("? (X,Y) out of bounds.");
@@ -165,8 +165,8 @@ void GcodeSuite::M48() {
while (angle < 0.0) angle += 360.0; // outside of this range. It looks like they behave correctly with
// numbers outside of the range, but just to be safe we clamp them.
X_current = X_probe_location - zprobe_offset[X_AXIS] + cos(RADIANS(angle)) * radius;
Y_current = Y_probe_location - zprobe_offset[Y_AXIS] + sin(RADIANS(angle)) * radius;
X_current = X_probe_location - probe_offset[X_AXIS] + cos(RADIANS(angle)) * radius;
Y_current = Y_probe_location - probe_offset[Y_AXIS] + sin(RADIANS(angle)) * radius;
#if DISABLED(DELTA)
LIMIT(X_current, X_MIN_POS, X_MAX_POS);

4
Marlin/src/gcode/motion/M290.cpp
View File

@@ -42,9 +42,9 @@
&& active_extruder == 0
#endif
) {
zprobe_offset[Z_AXIS] += offs;
probe_offset[Z_AXIS] += offs;
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET MSG_Z ": ", zprobe_offset[Z_AXIS]);
SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET MSG_Z ": ", probe_offset[Z_AXIS]);
}
#if ENABLED(BABYSTEP_HOTEND_Z_OFFSET)
else {

4
Marlin/src/gcode/probe/G30.cpp
View File

@@ -39,8 +39,8 @@
* E Engage the probe for each probe (default 1)
*/
void GcodeSuite::G30() {
const float xpos = parser.linearval('X', current_position[X_AXIS] + zprobe_offset[X_AXIS]),
ypos = parser.linearval('Y', current_position[Y_AXIS] + zprobe_offset[Y_AXIS]);
const float xpos = parser.linearval('X', current_position[X_AXIS] + probe_offset[X_AXIS]),
ypos = parser.linearval('Y', current_position[Y_AXIS] + probe_offset[Y_AXIS]);
if (!position_is_reachable_by_probe(xpos, ypos)) return;

14
Marlin/src/gcode/probe/M851.cpp
View File

@@ -36,17 +36,17 @@ void GcodeSuite::M851() {
// Show usage with no parameters
if (!parser.seen("XYZ")) {
SERIAL_ECHO_START();
SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET " X", zprobe_offset[X_AXIS],
" Y", zprobe_offset[Y_AXIS],
" Z", zprobe_offset[Z_AXIS]);
SERIAL_ECHOLNPAIR(MSG_PROBE_OFFSET " X", probe_offset[X_AXIS],
" Y", probe_offset[Y_AXIS],
" Z", probe_offset[Z_AXIS]);
return;
}
// Get the modified offsets
const float offs[] = {
parser.floatval('X', zprobe_offset[X_AXIS]),
parser.floatval('Y', zprobe_offset[Y_AXIS]),
parser.floatval('Z', zprobe_offset[Z_AXIS])
parser.floatval('X', probe_offset[X_AXIS]),
parser.floatval('Y', probe_offset[Y_AXIS]),
parser.floatval('Z', probe_offset[Z_AXIS])
};
// Error-check
@@ -64,7 +64,7 @@ void GcodeSuite::M851() {
}
// Save the new offsets
LOOP_XYZ(a) zprobe_offset[a] = offs[a];
LOOP_XYZ(a) probe_offset[a] = offs[a];
}
#endif // HAS_BED_PROBE

6
Marlin/src/lcd/extensible_ui/ui_api.cpp
View File

@@ -708,7 +708,7 @@ namespace ExtUI {
#if EXTRUDERS > 1
&& (linked_nozzles || active_extruder == 0)
#endif
) zprobe_offset[Z_AXIS] += mm;
) probe_offset[Z_AXIS] += mm;
#else
UNUSED(mm);
#endif
@@ -746,7 +746,7 @@ namespace ExtUI {
float getZOffset_mm() {
#if HAS_BED_PROBE
return zprobe_offset[Z_AXIS];
return probe_offset[Z_AXIS];
#elif ENABLED(BABYSTEP_DISPLAY_TOTAL)
return babystep.axis_total[BS_TOTAL_AXIS(Z_AXIS) + 1];
#else
@@ -757,7 +757,7 @@ namespace ExtUI {
void setZOffset_mm(const float value) {
#if HAS_BED_PROBE
if (WITHIN(value, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
zprobe_offset[Z_AXIS] = value;
probe_offset[Z_AXIS] = value;
#elif ENABLED(BABYSTEP_DISPLAY_TOTAL)
babystep.add_mm(Z_AXIS, (value - babystep.axis_total[BS_TOTAL_AXIS(Z_AXIS) + 1]));
#else

8
Marlin/src/lcd/menu/menu.cpp
View File

@@ -402,7 +402,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
ui.encoderPosition = 0;
const float diff = planner.steps_to_mm[Z_AXIS] * babystep_increment,
new_probe_offset = zprobe_offset[Z_AXIS] + diff,
new_probe_offset = probe_offset[Z_AXIS] + diff,
new_offs =
#if ENABLED(BABYSTEP_HOTEND_Z_OFFSET)
do_probe ? new_probe_offset : hotend_offset[Z_AXIS][active_extruder] - diff
@@ -414,7 +414,7 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
babystep.add_steps(Z_AXIS, babystep_increment);
if (do_probe) zprobe_offset[Z_AXIS] = new_offs;
if (do_probe) probe_offset[Z_AXIS] = new_offs;
#if ENABLED(BABYSTEP_HOTEND_Z_OFFSET)
else hotend_offset[Z_AXIS][active_extruder] = new_offs;
#endif
@@ -428,10 +428,10 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
draw_edit_screen(PSTR(MSG_Z_OFFSET), ftostr43sign(hotend_offset[Z_AXIS][active_extruder]));
else
#endif
draw_edit_screen(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(zprobe_offset[Z_AXIS]));
draw_edit_screen(PSTR(MSG_ZPROBE_ZOFFSET), ftostr43sign(probe_offset[Z_AXIS]));
#if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
if (do_probe) _lcd_zoffset_overlay_gfx(zprobe_offset[Z_AXIS]);
if (do_probe) _lcd_zoffset_overlay_gfx(probe_offset[Z_AXIS]);
#endif
}
}

2
Marlin/src/lcd/menu/menu_bed_leveling.cpp
View File

@@ -279,7 +279,7 @@ void menu_bed_leveling() {
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
#elif HAS_BED_PROBE
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &probe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif
#if ENABLED(LEVEL_BED_CORNERS)

2
Marlin/src/lcd/menu/menu_configuration.cpp
View File

@@ -347,7 +347,7 @@ void menu_configuration() {
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
MENU_ITEM(submenu, MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
#elif HAS_BED_PROBE
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &zprobe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
MENU_ITEM_EDIT(float52, MSG_ZPROBE_ZOFFSET, &probe_offset[Z_AXIS], Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX);
#endif
const bool busy = printer_busy();

18
Marlin/src/module/configuration_store.cpp
View File

@@ -176,7 +176,7 @@ typedef struct SettingsDataStruct {
// HAS_BED_PROBE
//
float zprobe_offset[XYZ];
float probe_offset[XYZ];
//
// ABL_PLANAR
@@ -613,8 +613,8 @@ void MarlinSettings::postprocess() {
// Probe Z Offset
//
{
_FIELD_TEST(zprobe_offset[Z_AXIS]);
EEPROM_WRITE(zprobe_offset);
_FIELD_TEST(probe_offset[Z_AXIS]);
EEPROM_WRITE(probe_offset);
}
//
@@ -1415,10 +1415,10 @@ void MarlinSettings::postprocess() {
// Probe Z Offset
//
{
_FIELD_TEST(zprobe_offset[Z_AXIS]);
_FIELD_TEST(probe_offset[Z_AXIS]);
#if HAS_BED_PROBE
float (&zpo)[XYZ] = zprobe_offset;
float (&zpo)[XYZ] = probe_offset;
#else
float zpo[XYZ];
#endif
@@ -2322,7 +2322,7 @@ void MarlinSettings::reset() {
#endif
constexpr float dpo[XYZ] = NOZZLE_TO_PROBE_OFFSET;
static_assert(COUNT(dpo) == 3, "NOZZLE_TO_PROBE_OFFSET must contain offsets for X, Y, and Z.");
LOOP_XYZ(a) zprobe_offset[a] = dpo[a];
LOOP_XYZ(a) probe_offset[a] = dpo[a];
#endif
//
@@ -3071,9 +3071,9 @@ void MarlinSettings::reset() {
say_units(true);
}
CONFIG_ECHO_START();
SERIAL_ECHOLNPAIR(" M851 X", LINEAR_UNIT(zprobe_offset[X_AXIS]),
" Y", LINEAR_UNIT(zprobe_offset[Y_AXIS]),
" Z", LINEAR_UNIT(zprobe_offset[Z_AXIS]));
SERIAL_ECHOLNPAIR(" M851 X", LINEAR_UNIT(probe_offset[X_AXIS]),
" Y", LINEAR_UNIT(probe_offset[Y_AXIS]),
" Z", LINEAR_UNIT(probe_offset[Z_AXIS]));
#endif
/**

2
Marlin/src/module/delta.cpp
View File

@@ -233,7 +233,7 @@ void home_delta() {
// Move all carriages together linearly until an endstop is hit.
destination[Z_AXIS] = (delta_height
#if HAS_BED_PROBE
- zprobe_offset[Z_AXIS]
- probe_offset[Z_AXIS]
#endif
+ 10);
buffer_line_to_destination(homing_feedrate(X_AXIS));

8
Marlin/src/module/motion.cpp
View File

@@ -505,7 +505,7 @@ void restore_feedrate_and_scaling() {
soft_endstop[axis].min = base_min_pos(axis);
soft_endstop[axis].max = (axis == Z_AXIS ? delta_height
#if HAS_BED_PROBE
- zprobe_offset[Z_AXIS]
- probe_offset[Z_AXIS]
#endif
: base_max_pos(axis));
@@ -1340,7 +1340,7 @@ void set_axis_is_at_home(const AxisEnum axis) {
#elif ENABLED(DELTA)
current_position[axis] = (axis == Z_AXIS ? delta_height
#if HAS_BED_PROBE
- zprobe_offset[Z_AXIS]
- probe_offset[Z_AXIS]
#endif
: base_home_pos(axis));
#else
@@ -1354,9 +1354,9 @@ void set_axis_is_at_home(const AxisEnum axis) {
if (axis == Z_AXIS) {
#if HOMING_Z_WITH_PROBE
current_position[Z_AXIS] -= zprobe_offset[Z_AXIS];
current_position[Z_AXIS] -= probe_offset[Z_AXIS];
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***\n> zprobe_offset[Z_AXIS] = ", zprobe_offset[Z_AXIS]);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("*** Z HOMED WITH PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***\n> probe_offset[Z_AXIS] = ", probe_offset[Z_AXIS]);
#else

4
Marlin/src/module/motion.h
View File

@@ -284,7 +284,7 @@ void homeaxis(const AxisEnum axis);
// Return true if the both nozzle and the probe can reach the given point.
// Note: This won't work on SCARA since the probe offset rotates with the arm.
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
return position_is_reachable(rx - zprobe_offset[X_AXIS], ry - zprobe_offset[Y_AXIS])
return position_is_reachable(rx - probe_offset[X_AXIS], ry - probe_offset[Y_AXIS])
&& position_is_reachable(rx, ry, ABS(MIN_PROBE_EDGE));
}
#endif
@@ -313,7 +313,7 @@ void homeaxis(const AxisEnum axis);
* nozzle must be be able to reach +10,-10.
*/
inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
return position_is_reachable(rx - zprobe_offset[X_AXIS], ry - zprobe_offset[Y_AXIS])
return position_is_reachable(rx - probe_offset[X_AXIS], ry - probe_offset[Y_AXIS])
&& WITHIN(rx, probe_min_x() - slop, probe_max_x() + slop)
&& WITHIN(ry, probe_min_y() - slop, probe_max_y() + slop);
}

22
Marlin/src/module/probe.cpp
View File

@@ -56,7 +56,7 @@
#include "../feature/backlash.h"
#endif
float zprobe_offset[XYZ]; // Initialized by settings.load()
float probe_offset[XYZ]; // Initialized by settings.load()
#if ENABLED(BLTOUCH)
#include "../feature/bltouch.h"
@@ -91,7 +91,7 @@ float probe_min_x() {
#if ENABLED(DELTA) || IS_SCARA
PROBE_X_MIN, MESH_MIN_X
#else
(X_MIN_BED) + (MIN_PROBE_EDGE), (X_MIN_POS) + zprobe_offset[X_AXIS]
(X_MIN_BED) + (MIN_PROBE_EDGE), (X_MIN_POS) + probe_offset[X_AXIS]
#endif
);
}
@@ -100,7 +100,7 @@ float probe_max_x() {
#if ENABLED(DELTA) || IS_SCARA
PROBE_X_MAX, MESH_MAX_X
#else
(X_MAX_BED) - (MIN_PROBE_EDGE), (X_MAX_POS) + zprobe_offset[X_AXIS]
(X_MAX_BED) - (MIN_PROBE_EDGE), (X_MAX_POS) + probe_offset[X_AXIS]
#endif
);
}
@@ -109,7 +109,7 @@ float probe_min_y() {
#if ENABLED(DELTA) || IS_SCARA
PROBE_Y_MIN, MESH_MIN_Y
#else
(Y_MIN_BED) + (MIN_PROBE_EDGE), (Y_MIN_POS) + zprobe_offset[Y_AXIS]
(Y_MIN_BED) + (MIN_PROBE_EDGE), (Y_MIN_POS) + probe_offset[Y_AXIS]
#endif
);
}
@@ -118,7 +118,7 @@ float probe_max_y() {
#if ENABLED(DELTA) || IS_SCARA
PROBE_Y_MAX, MESH_MAX_Y
#else
(Y_MAX_BED) - (MIN_PROBE_EDGE), (Y_MAX_POS) + zprobe_offset[Y_AXIS]
(Y_MAX_BED) - (MIN_PROBE_EDGE), (Y_MAX_POS) + probe_offset[Y_AXIS]
#endif
);
}
@@ -300,7 +300,7 @@ inline void do_probe_raise(const float z_raise) {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("do_probe_raise(", z_raise, ")");
float z_dest = z_raise;
if (zprobe_offset[Z_AXIS] < 0) z_dest -= zprobe_offset[Z_AXIS];
if (probe_offset[Z_AXIS] < 0) z_dest -= probe_offset[Z_AXIS];
NOMORE(z_dest, Z_MAX_POS);
@@ -580,7 +580,7 @@ static float run_z_probe() {
// Stop the probe before it goes too low to prevent damage.
// If Z isn't known then probe to -10mm.
const float z_probe_low_point = TEST(axis_known_position, Z_AXIS) ? -zprobe_offset[Z_AXIS] + Z_PROBE_LOW_POINT : -10.0;
const float z_probe_low_point = TEST(axis_known_position, Z_AXIS) ? -probe_offset[Z_AXIS] + Z_PROBE_LOW_POINT : -10.0;
// Double-probing does a fast probe followed by a slow probe
#if TOTAL_PROBING == 2
@@ -605,7 +605,7 @@ static float run_z_probe() {
// If the nozzle is well over the travel height then
// move down quickly before doing the slow probe
const float z = Z_CLEARANCE_DEPLOY_PROBE + 5.0 + (zprobe_offset[Z_AXIS] < 0 ? -zprobe_offset[Z_AXIS] : 0);
const float z = Z_CLEARANCE_DEPLOY_PROBE + 5.0 + (probe_offset[Z_AXIS] < 0 ? -probe_offset[Z_AXIS] : 0);
if (current_position[Z_AXIS] > z) {
// Probe down fast. If the probe never triggered, raise for probe clearance
if (!do_probe_move(z, MMM_TO_MMS(Z_PROBE_SPEED_FAST)))
@@ -735,8 +735,8 @@ float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_
float nx = rx, ny = ry;
if (probe_relative) {
if (!position_is_reachable_by_probe(rx, ry)) return NAN; // The given position is in terms of the probe
nx -= zprobe_offset[X_AXIS]; // Get the nozzle position
ny -= zprobe_offset[Y_AXIS];
nx -= probe_offset[X_AXIS]; // Get the nozzle position
ny -= probe_offset[Y_AXIS];
}
else if (!position_is_reachable(nx, ny)) return NAN; // The given position is in terms of the nozzle
@@ -757,7 +757,7 @@ float probe_at_point(const float &rx, const float &ry, const ProbePtRaise raise_
float measured_z = NAN;
if (!DEPLOY_PROBE()) {
measured_z = run_z_probe() + zprobe_offset[Z_AXIS];
measured_z = run_z_probe() + probe_offset[Z_AXIS];
const bool big_raise = raise_after == PROBE_PT_BIG_RAISE;
if (big_raise || raise_after == PROBE_PT_RAISE)

4
Marlin/src/module/probe.h
View File

@@ -29,7 +29,7 @@
#if HAS_BED_PROBE
extern float zprobe_offset[XYZ];
extern float probe_offset[XYZ];
bool set_probe_deployed(const bool deploy);
#ifdef Z_AFTER_PROBING
void move_z_after_probing();
@@ -51,7 +51,7 @@
#else
constexpr float zprobe_offset[XYZ] = { 0 };
constexpr float probe_offset[XYZ] = { 0 };
#define DEPLOY_PROBE()
#define STOW_PROBE()