bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
15,640 Commits 1 Branch 4 Tags 151 MiB
ae36ed3903
Commit Graph

1119 Commits

Author SHA1 Message Date
Scott Lahteine
1c48817a47 [cron] Bump distribution date 2019-12-11 00:00:04 -06:00
Scott Lahteine
07a61057ba [cron] Bump distribution date 2019-12-10 00:11:19 -06:00
Scott Lahteine
bb5717c5b3 [cron] Bump distribution date 2019-12-07 00:00:05 -06:00
Tanguy Pruvot
ab61c09bff Improve touch buttons behavior (#16109) 2019-12-06 00:47:50 -06:00
Scott Lahteine
f64649933f [cron] Bump distribution date 2019-12-04 01:57:33 -06:00
Scott Lahteine
b2c670fd94 [cron] Bump distribution date 2019-12-02 00:00:04 -06:00
ManuelMcLure
c061656659 Use PSU powerup delay for all powerups (#16065) 2019-12-01 17:36:49 -06:00
Felicia Hummel
6c2438deae Fix PSU_POWERUP_DELAY compile error (#16064) 2019-12-01 12:55:28 -06:00
Felicia Hummel
690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine
0138c0b55b [cron] Bump distribution date 2019-11-30 00:00:04 -06:00
Scott Lahteine
0f14e0e978 [cron] Bump distribution date 2019-11-29 00:00:06 -06:00
Scott Lahteine
289c5dcccb Fix boot screen sanity check 2019-11-27 01:10:23 -06:00
haschtl
ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Denis Semenov
0fcd1f4a49 Fix HAS_CLASSIC_E_JERK and related issues (#15968) 2019-11-23 15:56:07 -06:00
Jason Smith
b904ba0f29 Improve Delta probing / calibration (#15887) 2019-11-21 03:26:00 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
BigTreeTech
ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
Daniel Negut
a3229b30ec Add Zonestar/Anet LCD for SKR mini E3 (#15931) 2019-11-20 00:06:26 -06:00
Scott Lahteine
865055e07a [cron] Bump distribution date 2019-11-18 00:00:08 -06:00
Scott Lahteine
2bd6dc02d6 [cron] Bump distribution date 2019-11-17 00:00:06 -06:00
Scott Lahteine
a022defe06 [cron] Bump distribution date 2019-11-14 00:00:12 -06:00
Scott Lahteine
3f4636e916 "nozzle_to_probe_offset" is obsolete 2019-11-13 03:07:54 -06:00
ManuelMcLure
b9703fdf36 Ensure TMC + LIN_ADVANCE pulse length (#15807) 2019-11-10 19:04:28 -06:00
Scott Lahteine
5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20 Touch UI fixes for Cocoa Press (#15847) 2019-11-10 18:49:41 -06:00
LinFor
48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Scott Lahteine
534f2d69c1 [cron] Bump distribution date 2019-11-10 00:00:04 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
Scott Lahteine
249f600ceb [cron] Bump distribution date 2019-11-08 00:00:03 -06:00
Scott Lahteine
711703dcd1 [cron] Bump distribution date 2019-11-07 00:00:06 -06:00
Scott Lahteine
ea3217cd46
Move 'draw' methods into Menu Item classes (#15760) 2019-11-02 07:28:20 -05:00
Scott Lahteine
a7d7f36871 [cron] Bump distribution date 2019-11-02 00:00:05 -05:00
Scott Lahteine
899e0fcdbb [cron] Bump distribution date 2019-10-31 00:00:07 -05:00
Scott Lahteine
be498d6280 [cron] Bump distribution date 2019-10-29 00:00:05 -05:00
studiodyne
f139642e0f XY/Z Babystep Multiplicators (#15691) 2019-10-28 16:44:17 -05:00
InsanityAutomation
d4f5821cd6 Fix 3-point sanity check (#15696) 2019-10-28 15:46:59 -05:00
Scott Lahteine
f12285015a [cron] Bump distribution date 2019-10-25 12:18:21 -05:00
InsanityAutomation
b3d7d33faf Fix CUSTOM_VERSION_FILE has_include (#15635) 2019-10-24 13:07:29 -05:00
Giuliano Zaro
0f5d457252 Allow redundant temp sensor with SINGLENOZZLE (#15650) 2019-10-24 12:23:06 -05:00
Scott Lahteine
af214ff121 Fix up PSU_CONTROL checks 2019-10-22 16:16:12 -05:00
Scott Lahteine
725ec68faa [cron] Bump distribution date 2019-10-18 00:00:04 -05:00
Jason Smith
832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
Scott Lahteine
e0e406dbcc [cron] Bump distribution date 2019-10-16 00:00:03 -05:00
Scott Lahteine
3949d246df Fix ESP32 name conflict 2019-10-15 17:13:07 -05:00
Jason Smith
53abfdc2c3 Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards (#15547) 2019-10-15 14:18:46 -05:00
Piotr
fe4c69b64a Poll *all* enabled endstop pins (#15525) 2019-10-15 13:28:04 -05:00
InsanityAutomation
0074d63962 Vendor version override (#14189) 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2019-10-15 12:32:44 -05:00
LinFor
b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Scott Lahteine
13cf417a98 [cron] Bump distribution date 2019-10-10 00:00:04 -05:00
Marcio Teixeira
6a865a6146 Multi-language support (#15453) 2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c Improvements and fixes to Lulzbot UI (#15490) 2019-10-09 19:44:49 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c Work around a compiler bug 
See #15478
 2019-10-08 19:27:03 -05:00
Scott Lahteine
d45ab47139 [cron] Bump distribution date 2019-10-08 14:33:57 -05:00
Scott Lahteine
519cc1bc67 NUM_AXIS is now obsolete 2019-10-06 22:18:16 -05:00
Giuliano Zaro
a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Scott Lahteine
1ac629f919 [cron] Bump distribution date 2019-10-05 00:00:09 -05:00
Scott Lahteine
b7dfbb6af5 [cron] Bump distribution date 2019-10-04 00:00:05 -05:00
Scott Lahteine
acbe84c8ef [cron] Bump distribution date 2019-10-03 00:00:05 -05:00
Scott Lahteine
d0ef7b6588 [cron] Bump distribution date 2019-10-02 00:00:04 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
Scott Lahteine
f9400b6a3c [cron] Bump distribution date 2019-10-01 00:00:05 -05:00
Scott Lahteine
806d64e1bf X_SENSORLESS includes AXIS_HAS_STALLGUARD 2019-09-30 22:56:22 -05:00
DrDitto
55b8547f04 Simplify MKS_MINI_12864 init (move 5ms to u8g seq.) (#15428) 2019-09-30 02:11:58 -05:00
Scott Lahteine
b7a9481e01 [cron] Bump distribution date 2019-09-30 00:00:04 -05:00
Bob Kuhn
178dcd6fd8 SPI chaining with TMCStepper simplified interface (#15179) 2019-09-29 05:47:20 -05:00
Scott Lahteine
50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Tanguy Pruvot
43d6e9fa43 STM32F103.. reorganization, SKR mini fix (#15398) 2019-09-29 02:04:53 -05:00
Scott Lahteine
5e9898600b [cron] Bump distribution date 2019-09-29 00:00:07 -05:00
InsanityAutomation
e942b352c6 Fix Photograph Pin Sanity Check (#15406) 2019-09-28 16:18:23 -05:00
Scott Lahteine
1834d86df5 Fix sanity check typos 2019-09-28 15:26:21 -05:00
InsanityAutomation
a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
Scott Lahteine
f57ce2b40a [cron] Bump distribution date 2019-09-28 00:00:04 -05:00
Scott Lahteine
dc65788511 Shorthand for __VA_ARGS__ 2019-09-27 04:43:34 -05:00
Scott Lahteine
62e4e05a19 [cron] Bump distribution date 2019-09-27 00:00:04 -05:00
Scott Lahteine
661c3cfc99 Fix mesh bounds for MBL 2019-09-25 09:05:46 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
Scott Lahteine
bd6d144cdb [cron] Bump distribution date 2019-09-25 00:00:04 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Scott Lahteine
48e2f90304 Improve TMC sanity checks 2019-09-24 17:20:39 -05:00
Scott Lahteine
07eb213046 [cron] Bump distribution date 2019-09-24 00:00:11 -05:00
Scott Lahteine
9e7e8e229c [cron] Bump distribution date 2019-09-23 00:00:08 -05:00
Scott Lahteine
7fc4f7b815 [cron] Bump distribution date 2019-09-21 00:00:13 -05:00
Jason Smith
514223f960 Fix BACKLASH_COMPENSATION compiler issues (#15307) 2019-09-20 00:48:41 -05:00
Scott Lahteine
de78b61d35 [cron] Bump distribution date 2019-09-20 00:00:10 -05:00
InsanityAutomation
6a312fae80 Add before/after dir change delays (#15314) 2019-09-19 23:05:17 -05:00
Scott Lahteine
86e0b9eb05 [cron] Bump distribution date 2019-09-19 00:00:08 -05:00
Scott Lahteine
bcf630d8d1 Clarify a sanity check 2019-09-18 16:43:30 -05:00
Scott Lahteine
356b582a9f [cron] Bump distribution date 2019-09-18 00:00:05 -05:00
Scott Lahteine
b39ab3db37 Sanity-check for SD reprint 2019-09-17 23:34:14 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor (#15289) 2019-09-17 18:16:28 -05:00
Scott Lahteine
282c39e3d0 [cron] Bump distribution date 2019-09-17 00:00:06 -05:00
Scott Lahteine
9c218381c5 [cron] Bump distribution date 2019-09-16 00:00:05 -05:00
Scott Lahteine
20fbb751f1 Tell externals it's Marlin 2019-09-15 03:12:44 -05:00
Scott Lahteine
c4090b1375 [cron] Bump distribution date 2019-09-15 00:00:05 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor (#15256) 2019-09-14 03:05:10 -05:00
Scott Lahteine
ffb418b226 Move some SD comments 2019-09-14 02:31:47 -05:00
Robby Candra
acd76e8609 Allow odd mm bed sizes (#15258) 2019-09-14 01:26:14 -05:00
Scott Lahteine
bbbfb0015b [cron] Bump distribution date 2019-09-14 00:00:14 -05:00
Scott Lahteine
ae7ae89bb3 [cron] Bump distribution date 2019-09-13 00:00:04 -05:00
Scott Lahteine
7cf1befbec [cron] Bump distribution date 2019-09-12 00:01:23 -05:00
Scott Lahteine
41a3fbceac [cron] Bump distribution date 2019-09-11 00:00:04 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
Scott Lahteine
54abf3aeba [cron] Bump distribution date 2019-09-10 00:00:06 -05:00
Scott Lahteine
5949c24afc [cron] Bump distribution date 2019-09-09 00:00:05 -05:00
Luu Lac
8bca3fcf2c Display chamber with HAS_TEMP_CHAMBER (#15194) 2019-09-08 02:20:18 -05:00
Jamie
dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Scott Lahteine
94948d3dcb Compact some sanity conditions 2019-09-06 19:03:04 -05:00
Scott Lahteine
ca1a3476cb [cron] Bump distribution date 2019-09-06 00:00:04 -05:00
Scott Lahteine
37d3c7288f [cron] Bump distribution date 2019-09-05 00:00:04 -05:00
Robby Candra
6b05d5d65d Allow TOUCH_BUTTONS to be swapped (#15100) 2019-09-04 13:13:05 -05:00
Scott Lahteine
d9bbe0ff02 [cron] Bump distribution date 2019-09-04 00:00:03 -05:00
Scott Lahteine
75efa3cdac
Reorganize HAL (#14832) 2019-09-02 19:49:58 -05:00
thisiskeithb
cdd5056aba Increase MKS MINI 12864 default contrast (#15139) 2019-09-02 19:40:58 -05:00
Scott Lahteine
b4715b29bb [cron] Bump distribution date 2019-09-02 00:00:04 -05:00
Scott Lahteine
34b73426e5 Apply #ifdef/#ifndef where possible 2019-09-01 23:54:50 -05:00
Jason Smith
be051c890f Fix Z_STEPPER_ALIGN_[XY] sanity error (#15124) 2019-09-01 04:00:20 -05:00
Bob Kuhn
ba91bca1eb TMC SPI daisy chain support (experimental) (#15081) 2019-08-30 17:39:45 -05:00
Scott Lahteine
05ef9b2f55 [cron] Bump distribution date 2019-08-30 14:44:39 -05:00
AlexandrZloy
0ebaea94be Add stallGuard threshold for X2 (#15042) 2019-08-29 00:15:31 -05:00
Scott Lahteine
e1d65b8937 [cron] Bump distribution date 2019-08-29 00:00:03 -05:00
Scott Lahteine
1d8ad7cf71 Safe changes from HAL cleanup 2019-08-28 21:21:47 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen (#15057) 2019-08-28 07:40:18 -05:00
Scott Lahteine
b2a4b6f34e Don't use board url as override 2019-08-28 04:44:40 -05:00
Scott Lahteine
318356b6bc [cron] Bump distribution date 2019-08-26 00:00:07 -05:00
Daniel Callander
155765646e Add warning when trying to use JD with kinematic systems (#15032) 2019-08-25 04:43:53 -05:00
Scott Lahteine
c7825e6719 Contrast over 63 assume 255 max 
This is closer to the prior behavior.
 2019-08-25 04:31:00 -05:00
Tim Moore
1461ee4d36 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (#15046) 2019-08-25 04:25:07 -05:00
Scott Lahteine
9e9e578234 [cron] Bump distribution date 2019-08-25 00:00:03 -05:00
Scott Lahteine
04a9962cb5 Fix: Contrast override in pins files 
Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.
 2019-08-24 00:58:05 -05:00
Scott Lahteine
8c73017a69 [cron] Bump distribution date 2019-08-24 00:00:04 -05:00
Tanguy Pruvot
e604f76703 Enable contrast via LCD_CONTRAST_INIT (#15006) 2019-08-21 18:56:39 -05:00
Scott Lahteine
f1942f6ec0 [cron] Bump distribution date 2019-08-21 00:00:04 -05:00
Ludy
05995d1fd6 Unify buzz methods as MarlinUI::buzz (#14803) 2019-08-20 02:01:37 -05:00
Scott Lahteine
94397dbdb4 [cron] Bump distribution date 2019-08-19 00:00:07 -05:00
Scott Lahteine
dfcd437486 Base HAS_LCD_CONTRAST on display type 2019-08-18 23:38:12 -05:00
Scott Lahteine
9a3ee3be53 [cron] Bump distribution date 2019-08-18 00:00:04 -05:00
Scott Lahteine
9e49f154d8 [cron] Bump distribution date 2019-08-17 15:47:17 -05:00
Tim Moore
4575978a1f Fix auto power for chamber fan (#14922) 2019-08-16 18:42:24 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Scott Lahteine
24ce8beb48 [cron] Bump distribution date 2019-08-14 00:00:11 -05:00
Ludy
d7172a4558 Cleanup and conditions (#14886) 2019-08-10 19:22:18 -05:00
Ludy
9479ec32f7 Fix Service Menu compile error (#14903) 2019-08-10 00:53:26 -05:00
Scott Lahteine
a6f682d860 [cron] Bump distribution date 2019-08-08 06:39:53 -05:00
teemuatlut
d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
Scott Lahteine
9ac348ef7b SDPOWER => SDPOWER_PIN 2019-08-02 02:24:15 -05:00
Scott Lahteine
c1b99c43b6 [cron] Bump distribution date 2019-07-30 05:07:39 -05:00
Scott Lahteine
bc58e678bd More general FSMC display option 2019-07-30 04:25:55 -05:00
rafaljot
e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
Scott Lahteine
8837cd3b53 [cron] Bump distribution date 2019-07-29 18:46:40 -05:00
Scott Lahteine
e5d73f68c8
HAL folder organization (#14763) 2019-07-28 23:55:24 -05:00
mikeshub
1579091c20 PID loop improvements (#14746) 
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
 2019-07-28 15:50:25 -05:00
Giuliano Zaro
290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Ludy
ead6bb267d Add Z3 SanityCheck, revert early sanity change (#14717) 2019-07-24 22:32:49 -05:00
Scott Lahteine
1088846cae Cosmetic updates from 14044 2019-07-24 01:52:36 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f Improve magnetic dock switching toolhead (#14663) 2019-07-19 06:07:26 -05:00
Robby Candra
71d8c6f742 Fix LCD sanity check (#14678) 2019-07-19 05:53:36 -05:00
Scott Lahteine
fd2bc3a212 [cron] Bump distribution date 2019-07-19 00:00:09 -05:00
Scott Lahteine
3d153486da Fysetc rename Part 2 2019-07-18 04:36:08 -05:00
Scott Lahteine
5535a047d7 [cron] Bump distribution date 2019-07-16 00:00:08 -05:00
Tanguy Pruvot
bae8d0a4bd DOGM: Avoid white flash on TFT (re)init (#14631) 
- Avoid white flash on TFT (re)init. Unlike Graphical LCD, the TFT init color may be full white if the backlight is on during init.

- Add a conditional for delayed backlight init which can be applied to any backlit display.
 2019-07-15 17:36:16 -05:00
Scott Lahteine
93bc1b17f9 [cron] Bump distribution date 2019-07-15 00:00:08 -05:00
Scott Lahteine
d4be970c8b Update DOGLCD conditions 2019-07-14 13:10:13 -05:00
Scott Lahteine
2d84bcb4cd Simplify, update LCD sanity-check 2019-07-14 13:09:16 -05:00
Scott Lahteine
eaf1c0954e Update some precompiler tests 2019-07-14 13:09:16 -05:00
Scott Lahteine
a85cd042d8 [cron] Bump distribution date 2019-07-14 00:00:09 -05:00
Scott Lahteine
91bb0f5439 [cron] Bump distribution date 2019-07-13 00:00:09 -05:00
InsanityAutomation
f1eaed7e98 Only init servo pins used for servos (#14589) 2019-07-12 04:30:15 -05:00
Scott Lahteine
89964ec30d [cron] Bump distribution date 2019-07-12 00:00:08 -05:00
Scott Lahteine
948c3f580b Clean up some LCD conditions 2019-07-11 06:11:19 -05:00
Scott Lahteine
e5a5273edb [cron] Bump distribution date 2019-07-11 00:00:10 -05:00
Scott Lahteine
9817976375 [cron] Bump distribution date 2019-07-10 00:00:08 -05:00
gmarsh
ab99a80793 GMARSH X6 board support (#14550) 2019-07-09 00:30:08 -05:00
Scott Lahteine
a2ba0aaaac
HAL include and other adjustments (#14525) 2019-07-08 23:42:29 -05:00
Scott Lahteine
1a349c7522 Add HAS_TMC220x 2019-07-08 23:07:42 -05:00
Scott Lahteine
9821ec2afd Fix SKR Pro pins, STM32F1/4 sanity-check 
Co-Authored-By: Msq001 <msq001@users.noreply.github.com>
 2019-07-08 23:07:42 -05:00
Scott Lahteine
2b1c2a0db9 [cron] Bump distribution date 2019-07-08 00:00:11 -05:00
Scott Lahteine
e7307af42d [cron] Bump distribution date 2019-07-07 00:09:53 -05:00
Ludy
c0497234b9 SanityCheck Biqu SKR 1.1 => BigTree SKR 1.1 (#14526) 2019-07-06 21:24:10 -05:00
Scott Lahteine
8916acf083 [cron] Bump distribution date 2019-07-06 00:00:09 -05:00
Ludy
a210f80adc Sanity-check for CASE_LIGHT_PIN (#14518) 2019-07-05 20:18:43 -05:00
Scott Lahteine
fe02241044 NONE on combined options 2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
8ff49d6b46 [cron] Bump distribution date 2019-07-05 03:48:50 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
c6e6365e15 [cron] Bump distribution date 2019-07-04 15:56:02 -05:00
Scott Lahteine
de462f2b8a Revert "Sort out settings.load with SD EEPROM emulation (#14458)" 
This reverts commit 108d0df565.
 2019-07-03 19:11:30 -05:00
Scott Lahteine
6a2a10a154 Bump distribution date 2019-07-03 03:11:12 -05:00
Scott Lahteine
371969b531 Remove deprecated SCARA option 2019-07-03 02:43:33 -05:00
Scott Lahteine
ce2b4bc20c Conditionals tweak 2019-07-02 20:30:26 -05:00
Scott Lahteine
274809aced Bump distribution date 2019-07-02 05:54:06 -05:00
Tanguy Pruvot
108d0df565 Sort out settings.load with SD EEPROM emulation (#14458) 2019-07-01 09:10:17 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
Scott Lahteine
56c4a96180 Bump distribution date 2019-07-01 01:21:31 -05:00
Scott Lahteine
ced30b1054 Update ExtUI sanity checks 2019-07-01 00:50:22 -05:00
Marcio Teixeira
e6cf7860e8 Improve ExtUI, fix compiler errors, warnings (#14441) 2019-06-29 00:23:57 -05:00
Scott Lahteine
e89a47c8b5 Bump distribution date 2019-06-29 00:13:59 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Andy Shaw
064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
Scott Lahteine
98f3a3d5c3 Bump distribution date 2019-06-26 03:15:31 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
75aeb41ab7 SKRmini support for Fysetc Mini Panel (#14319) 2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
sensei73
ce5f94c8f4 Fix Touch-MI sanity checks (#14316) 2019-06-17 17:46:14 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101) 
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
 2019-06-14 22:19:48 -05:00
MastS
18904c42f6 Fysetc LCD backlight timeout (#14265) 2019-06-12 21:59:39 -05:00
Scott Lahteine
0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
Scott Lahteine
455f0de817 Undefine sanity check tests when done 2019-06-08 06:29:28 -05:00
InsanityAutomation
4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
Ludy
bd494a6bd6 Update defines for patched temperature macros (#14161) 2019-05-28 17:43:31 -05:00
Minims
32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
doggyfan
90121047d9 Fix thermal protection with user thermistor (#14130) 2019-05-25 23:37:08 -05:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
4ef364a073 Sanity check probe offsets must be integers 2019-05-21 17:16:21 -05:00
chai-md
940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
Bob Kuhn
456a0ee76b Improve Due SW SPI, Fysetc sanity checks, &c. (#13939) 2019-05-11 16:51:39 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Scott Lahteine
23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
jmdearras
b65cb5704d Fix, improve FYSETC_MINI_12864 support (#13730) 2019-04-19 20:11:51 -05:00
Scott Lahteine
0a6835fbea More robust HAS_LCD_CONTRAST 2019-04-18 21:09:34 -05:00
Bob Kuhn
9b578ca343 Support FYSETC_MINI_12864 on Re-ARM, RAMPS_FD, MKS SBASE (#13717) 2019-04-15 22:54:11 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
Ludy
9fd3e64ba8 Fix compile error with EXTRUDER>1 (#13651) 2019-04-11 13:58:50 -05:00
ManuelMcLure
492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic (#13646) 2019-04-10 17:14:57 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
Scott Lahteine
c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine
240ea1bbb3 Split up games into separate files 2019-04-04 03:06:19 -05:00
Scott Lahteine
5d2c5877f7 DOGM bootscreen cleanup 2019-04-03 18:10:50 -05:00
Robby Candra
46445a5a16 Event G-code for Stop SD Print (#13547) 
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
 2019-04-02 22:09:30 -05:00
Scott Lahteine
8b7c3eec83 Games, for fun (and stress-testing) (#13464) 2019-04-01 17:48:54 -05:00
Chris Pepper
ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 2019-03-26 01:03:23 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
Hadrien Jouet
0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
InsanityAutomation
050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Scott Lahteine
51ff5b68fa Clean up fastIO ahead of PWM patch 2019-03-12 20:39:55 -05:00
Scott Lahteine
d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
7eggert
10c8c034bd Allow both encoder and ADC keypad (#13355) 2019-03-11 18:10:56 -05:00
Scott Lahteine
aa1d587128 Some LCD code cleanup 2019-03-11 05:07:31 -05:00
pinchies
4df9509ead Add support for printers with inverted fan pins (#13362) 
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
 2019-03-10 20:51:21 -05:00
Reece Kibble
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Tobias Frost
6df51201ae Include EXTENSIBLE_UI in single LCD sanity check (#13306) 2019-03-05 06:33:36 -06:00
Scott Lahteine
fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
InsanityAutomation
eb4bf93ea4 Add more Babystep options (#13262) 2019-02-27 04:38:56 -06:00
Scott Lahteine
f37df28d17 UBL G29 T current position fix 
Counterpart to #12845
 2019-02-26 22:25:53 -06:00
Scott Lahteine
808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine
38363902c7 Fix sanity checks for distinct E factor settings 
Reference #13156
 2019-02-25 00:20:36 -06:00
kwalters3
5eb82ca6a8 Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C (#13223) 2019-02-22 19:08:36 -06:00
Scott Lahteine
631d867dc9 HAL cleanups 2019-02-20 06:27:26 -06:00
LinFor
ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
Scott Lahteine
7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 2019-02-12 20:13:20 -06:00
revilor
e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 2019-02-10 05:06:46 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
Marcio Teixeira
e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine
10d855cb21 Sanity check USER_GCODE formatting 2019-02-04 06:36:41 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
Nicolas G
6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Mark Zachmann
4d1093b386 Fix init of last_direction_bits (#13067) 2019-02-03 01:29:00 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
teemuatlut
f0503372d9 Revert E_AXIS_N cast (#13055) 2019-01-30 20:55:05 -06:00
InsanityAutomation
48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
teemuatlut
1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine
b402040059 Split bed size sanity check into two 2019-01-11 15:49:57 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
Giuliano Zaro
54ba44ee37 Fix bad sanitycheck (#12748) 2018-12-30 10:44:15 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
Marcio Teixeira
902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
Dave Johnson
9a4a463ec4 Sanity-check LIGHTWEIGHT_UI, move comment up (#12630) 2018-12-12 16:59:20 -06:00
Marcio Teixeira
b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Scott Lahteine
fa47ce369a Sanity-check for negative steps, feedrate, accel 2018-12-07 19:38:15 -06:00
teemuatlut
50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Jacob Jordan
8be91677df Fix Skew factors (#12555) 
- Ensure Skew factors are calculated from test square measurements
 2018-11-29 11:39:31 -06:00
Marcio Teixeira
439a3e8463 Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544) 2018-11-27 13:45:25 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine
d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Ludy
1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Ludy
93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Scott Lahteine
7ee5894360 Allow float XY probe offsets 
Responding to #12383

XY probe offsets should be integers because adding decimal points makes the code larger. But if decimals are very much wanted, this commit removes the old restriction.
 2018-11-17 07:44:47 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine
ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414) 
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
 2018-11-13 01:47:45 -06:00
Scott Lahteine
a3923424c7 Clean up LCD width/height determination 2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
revilor
b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine
b169320a03 Clean trailing whitespace 2018-11-07 02:40:18 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine
427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine
d5ab4cd22a Provide a default for Z_PROBE_LOW_POINT 2018-11-05 04:17:37 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
cd066bfeba Extend error messages for E factors sanity-checks 2018-11-04 18:42:56 -06:00
Ludy
c10edb0998 Update, correct sanity-checks for up to 6 extruders (#12333) 2018-11-04 18:36:45 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c Clear up HAS_WORKSPACE_OFFSET meaning 2018-11-03 04:06:37 -05:00
Ludy
5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine
3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Ludy
9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine
182b1405d9 LCD conditionals in configurations 2018-10-28 15:46:45 -05:00
Scott Lahteine
2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
Scott Lahteine
ab8425f1b5
Clean up PROBE_TRIGGERED_WHEN_STOWED_TEST (#12232) 2018-10-26 19:18:20 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
Scott Lahteine
e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
TheSFReader
a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Ludy
a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
b641571098 Replace types.h with millis_t.h 2018-10-20 23:07:12 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132) 
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
 2018-10-18 11:34:52 -05:00
Hannes Brandstätter-Müller
c36773bffb Update the Ender-4 example config (#12131) 
- Enable filament change menu
- Enable bed-PID
- Enable s-curve acceleration
- Enable some menu items
- Update from Skorpi's new version
- Fix extruder steps, deactivate nozzle clean feature
 2018-10-17 15:49:52 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Scott Lahteine
8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Scott Lahteine
0139762a96 Fix a sanity check 2018-10-16 05:46:33 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability (#12043) 
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
 2018-10-09 20:00:47 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Scott Lahteine
7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Marcio Teixeira
2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Scott Lahteine
f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Scott Lahteine
eafd62308e
Use TMC2208Stepper v0.2.5 (#11714) 2018-09-08 20:41:21 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Scott Lahteine
b213a89ef5 Sanity-check NOZZLE_PARK_POINT 2018-09-05 06:18:08 -05:00
Scott Lahteine
8e18e48d49
Merge pull request #11610 from Freeviv/bugfix-2.0.x 
[2.0.x] Editable servo angles
 2018-09-03 03:55:38 -05:00
teemuatlut
49e107cea9 Restrict SW serial to AVR (#11696) 2018-09-01 15:24:44 -05:00
Scott Lahteine
18f1af2dca Fix up Teensy tests, servo sanity 2018-09-01 01:10:20 -05:00
Scott Lahteine
d55f44edba
Printcounter improvements (#11689) 2018-08-31 17:40:39 -05:00
Scott Lahteine
136860e8bb Sanity-check SERVO pin for servo probes 2018-08-31 15:47:47 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Scott Lahteine
d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine
acf5ae3083 !ENABLED => DISABLED 2018-08-24 16:36:37 -05:00
Chris Pepper
5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Scott Lahteine
6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC (#11508) 2018-08-10 00:30:28 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine
131d216afa
Fix drivers.h dependency, defer macro evaluation (#11450) 2018-08-03 21:49:04 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
Lee Olivares
094e6d81a5 Add Einstart-S support (#11219) 
Indeed the HAL does not need to be mucked around with to expose ATmega2560 pins not available as numbers on the MEGA board, I'll need to update the wiki with that tidbit and a reference to the pin-mapping comment in `fastio_1280.h`.
 2018-07-26 05:52:22 -05:00
Bo Herrmannsen
67b205fd45 Add support for board RuRAMPS4D v1.3 (#11363) 2018-07-25 19:32:27 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
bf7d0ba859 Assert that XY probe offsets are integers 2018-07-12 22:48:07 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE 
Co-Authored-By: nightgryphon <ngryph@gmail.com>
 2018-07-12 22:46:34 -05:00
Scott Lahteine
68e6650df7 Remove Quake Fast Inverse SQRT (it isn't faster) 2018-07-04 22:22:10 -05:00
Scott Lahteine
480a3d3d0c Apply sensorless homing requirements only for specified axes 2018-07-03 19:16:09 -05:00
Scott Lahteine
1ea222e6fc Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE 
Fix #11183
 2018-07-02 17:26:53 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling (#11153) 2018-06-30 13:44:27 -05:00
Colin Gilgenbach
0fff79c24b Fixes G29_with_retry behavior (#11045) 
* Fix G29 (ABL) retry behavior
 2018-06-29 20:48:11 -05:00
Scott Lahteine
1b8973eb1c Fix up microsteps conditionals 2018-06-27 23:41:32 -05:00
Scott Lahteine
053438a3aa
Poll all endstops, even when stationary (#11123) 2018-06-27 04:18:57 -04:00
Scott Lahteine
7a84b03796 Use MIN/MAX in post-conditionals 2018-06-20 03:15:19 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 (#11034) 2018-06-18 22:04:03 -05:00
Scott Lahteine
0d79128c8d Localize stepper-specific defines 2018-06-12 21:16:54 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
 2018-06-10 16:02:47 -05:00
etagle
39a7e7720d Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
 2018-06-10 16:02:47 -05:00
Scott Lahteine
bbf80440bf Add sanity-check for MOTHERBOARD 2018-06-10 04:03:33 -05:00
Scott Lahteine
2deff0d9b9 Fix/Improve junction deviation 
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
 2018-05-31 20:09:53 -05:00
Scott Lahteine
9713538427 HOTENDS for Switching Nozzle with Switching Extruder 2018-05-29 11:05:52 -05:00
Scott Lahteine
0ca9db7051 Correct HOTENDS for SWITCHING_EXTRUDER 2018-05-27 23:22:48 -05:00
Scott Lahteine
1b200f3312 Sanity check SWITCHING_EXTRUDER with SINGLENOZZLE 2018-05-26 23:26:23 -05:00
Scott Lahteine
931ab4ec40 Rename Junction Deviation options 2018-05-26 18:33:51 -05:00
Scott Lahteine
aaaf09bda2 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:33:51 -05:00
Scott Lahteine
cf7d5a642a
Fix manual moves for switching tools (#10868) 2018-05-26 18:30:53 -05:00
Scott Lahteine
4118199ddd Tweaks to core headers 2018-05-21 20:32:18 -05:00
Bob Kuhn
d557c84a71 [2.0.x] Error for FAST_PWM_FAN with 32 bit CPU (#10798) 2018-05-20 11:37:55 -05:00
Scott Lahteine
83d42f33e1 Add HAS_HOTEND_OFFSET_Z conditional 2018-05-19 17:05:15 -05:00
GMagician
3c76bda2d8 Fix switching extruder 
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
 2018-05-19 17:05:15 -05:00
Jiri Jaburek
43ddb29f9e Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:18:46 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it (#10748) 2018-05-14 21:38:24 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert (#10693) 
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
 2018-05-11 01:01:51 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 (#10648) 2018-05-08 11:10:45 -05:00
Giuliano
4e16e699c1 Fix sanity checks for dual axes (#10633) 2018-05-07 03:34:26 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type (#10630) 2018-05-06 19:16:55 -05:00
Scott Lahteine
8c5bc77fb9 Fix the sanity-check for config versions 2018-05-06 09:37:00 -05:00
Scott Lahteine
81b632c255 Additional temp-oriented improvements 2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
b7e938a9fb LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 07:13:56 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine
616651ff23 Add sanity check for LED_CONTROL_MENU 
Addressing #10569
 2018-04-29 18:34:57 -05:00
Scott Lahteine
f790b4bc0a Reorganize some conditionals 2018-04-27 02:23:11 -05:00
Scott Lahteine
df6bc812b5 Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE 
As pointed out in #10532
 2018-04-27 02:23:10 -05:00
Scott Lahteine
299c4fed42 Undefine PIDTEMPBED without a bed heater 2018-04-26 01:30:10 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 2018-04-22 02:50:48 -05:00
Scott Lahteine
11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Scott Lahteine
a0dac95d25
Merge pull request #10460 from thinkyhead/bf2_trigorilla_14 
[2.0.x] Split TRIGORILLA into 1.3 and 1.4
 2018-04-20 18:25:40 -05:00
Scott Lahteine
f0cbf3d432 Correction to sanity check 2018-04-20 18:16:27 -05:00
Scott Lahteine
80e29492c6 TRIGORILLA => TRIGORILLA_13 2018-04-20 16:12:25 -05:00
Marcio Teixeira
5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
4f184ba5da
[2.0.x] Add BOARD_MKS_BASE_15 with digital micro-stepping (#10454) 
* Add BOARD_MKS_BASE_15 with digital micro-stepping
* Rename MKS_13 to MKS_GEN_13
 2018-04-18 22:58:43 -05:00
Scott Lahteine
39c6f65ce7 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:57:44 -05:00
Chris Pepper
c9aed73987 Fix missed includes from HAL macro patch (#10416) 2018-04-15 18:27:34 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
Luc Van Daele
12785583d0 [2.0.x] G33 MIN_STEPS_PER_SEGMENT (#10386) 2018-04-12 20:22:29 -05:00
Yunhui Fu
c96412a78f [2.0.x] UTF-8 language translation support (#10213) 2018-04-12 20:14:01 -05:00
Eduardo José Tagle
57a899a412 [2.0.x] 6th-order jerk-controlled motion planning in real-time for AVR (#10373) 2018-04-11 18:13:42 -05:00
Sean
2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
e02fc4f1d6 Better RESTORE_LEVELING_AFTER_G28 sanity-check 
As suggested by @GMagician
 2018-04-08 03:24:15 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL 
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
 2018-04-07 21:03:28 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:06 -05:00
Marcio Teixeira
75037493fa Default active low for TMC2130 DIAG1 (#10294) 
- Added sanity check to inform users to set the endstop to inverting
  when using SENSORLESS_HOMING
 2018-04-06 19:48:46 -05:00
Karl Andersson
7cbbc2af7a [2.0.x] Optional heater signal inversion (#10260) 2018-04-02 19:37:41 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
49f384a2ab Note about MKS_MINI_12864 in sanitycheck 2018-03-31 22:52:23 -05:00
Scott Lahteine
f6d13e2295 Allow Z_SAFE_HOMING sanity checks to handle floats 2018-03-31 19:01:56 -05:00
Scott Lahteine
1be955e52a Alert users about low Z jerk values 2018-03-28 23:08:33 -05:00
Scott Lahteine
a891af2f7a Enforce minimum TMC2130 / TMC2208 libs 2018-03-24 15:57:22 -04:00
Bob-the-Kuhn
433e984d1f move comment to fix compile error 2018-03-24 13:44:54 -05:00
Bob-the-Kuhn
b756a15aba another needs to be deleted 2018-03-24 10:22:03 -05:00
Bob-the-Kuhn
50c81ebe0d remove check that always fails 2018-03-24 09:36:50 -05:00
Scott Lahteine
3ac135cef3 Enforce minimum TMC2130 / TMC2208 libs 2018-03-23 18:05:23 -04:00
Eduardo José Tagle
97e8a6ebd9 Various fixes for DUE... (#10152) 
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
 2018-03-21 19:04:45 -05:00
Scott Lahteine
987597532c For MK2_MULTIPLEXER undef DISABLE_INACTIVE_EXTRUDER 
Fix #10098
 2018-03-21 04:34:50 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 04:11:46 -05:00
Scott Lahteine
d603e655d3 Fix SWITCHING_EXTRUDER manual movement 2018-03-16 03:22:56 -05:00
Scott Lahteine
5f77816772 Reduce size of "only one" sanity checks 2018-03-16 02:43:02 -05:00
Scott Lahteine
e7570f3195 Improve TMC config organization, naming 2018-03-14 00:18:41 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Bob-the-Kuhn
0d8c15c01f restore PR 9661 files & V1 fix 2018-03-10 22:46:32 -06:00
Bob-the-Kuhn
bf59a4a6df
Revert "[2.0.x] DUE compatibility with shared SPI LCDs, USB mass storage, add pin defs & update examples\MakerParts\Configuration.h" 2018-03-10 17:22:20 -06:00
Bob-the-Kuhn
914bb80bde removed SDSS init 
added device & comm drivers for shared SPI LCDs

mistyped some updates in ultralcd_impl_DOGM.h

remove unwanted changes in onfiguration.h

still can't type

Update HAL_LCD_class_defines.h

include USB mass storage & misc
 2018-03-09 23:06:11 -06:00
Scott Lahteine
eb212ae073 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
6d7f4f84e2
Add board MKS_BASE_HEROIC (#9926) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:52 -06:00
Scott Lahteine
c37b3f995a Sanity-check some graphical LCD-only options 2018-03-03 20:31:59 -06:00
Bob-the-Kuhn
c1f4112bdc [2.0.x] Add 1284 support & misc. bug fixes (#9864) 2018-03-01 03:07:39 -06:00
Scott Lahteine
118899357d
Add sanity checks to Linear Advance 1.5 (#9873) 2018-03-01 02:10:43 -06:00
Scott Lahteine
a446433c87
Fix SENSORLESS_HOMING for Core Kinematics (#9868) 2018-03-01 01:37:31 -06:00
Scott Lahteine
8c03ce4d80 Fix Z safe homing sanity check for no probe 
Fix #9851
 2018-02-28 05:28:35 -06:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00
Scott Lahteine
b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 2018-02-23 13:38:54 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 (#9712) 2018-02-23 00:53:29 -06:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740) 2018-02-21 00:46:25 -06:00
Scott Lahteine
c4ec01d59b Conditionals for SWITCHING_EXTRUDER 
In reference to #5367. SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
 2018-02-19 10:59:47 -06:00
Studiodyne
d3ca82d8c2 Support for multiple filament runout sensors 2018-02-19 07:02:50 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support (#9701) 
Implemented for LPC1768.
 2018-02-18 19:26:23 -06:00
Kevin
9019ea0fce Option to force X or Y to home first when homing the other axis 2018-02-18 01:11:41 -06:00
Scott Lahteine
f6cc89ec7c LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 08:17:22 -06:00
Roxy-3D
3d74ff3c87
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:16:12 -06:00
Scott Lahteine
5dc04c5201 Fix #9361 2018-02-14 07:48:20 -06:00
Scott Lahteine
8e0c107545
Have Kossel Pro use Z_MIN_PROBE_ENDSTOP (#9586) 2018-02-11 01:41:40 -06:00
Scott Lahteine
f64d300cfd
Sanity check SERIAL_PORT 
Addressing #7400
 2018-02-09 00:44:15 -06:00
Thomas Moore
1541224a81 Enable Z axis and delta sensorless homing (#9516) 2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Scott Lahteine
704d33c374 Special override of LCD_WIDTH 2018-02-08 01:30:56 -06:00
Scott Lahteine
16739264d3 Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
 2018-02-05 22:30:03 -06:00
GMagician
f27c89980a [2.0.x] Simplify bltouch configuration (#9488) 2018-02-05 14:38:09 -06:00
Scott Lahteine
3a1225e438 Sanity check SENSORLESS_HOMING 2018-02-04 18:52:44 -06:00
Scott Lahteine
db031d5d76 Add missing SoftwareSerial begin for TMC2208 
Based on #9299
 2018-01-22 10:43:24 -06:00
Thomas Moore
3db35ba9be [2.0.x] Fix change filament for delta machines (#9295) 2018-01-22 10:21:42 -06:00
Scott Lahteine
2ebf52e57d Fix Skew Correction pre-calculation overflow error 2018-01-22 08:20:21 -06:00
Scott Lahteine
582d073de1 Patch up digital microstepping and SPI CS pins 2018-01-22 01:27:11 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
Scott Lahteine
4bc4351250
Date refresh 2018-01-20 09:17:57 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem 
[2.0.x] LPC1768: Free up some RAM
 2018-01-19 22:35:45 -06:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations 2018-01-17 09:36:12 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression 2018-01-16 17:58:15 -06:00
Christopher Pepper
6f1bf5d212 LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256 2018-01-15 22:02:21 +00:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup 
[2.0.x]TMC followup
 2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676 SERIAL_STATS_* features not supported on USBCON targets (#9127) 2018-01-09 18:42:55 -06:00
teemuatlut
9d923c6c03 Fix TMC gcode commands 2018-01-08 18:45:05 +02:00
Scott Lahteine
1c41de16d4 Trailing whitespace clean 2018-01-05 10:11:31 -06:00
Scott Lahteine
7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Even
ea1a8d1223 add original RADDS LCD + Controller 
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
 2017-12-24 19:00:23 -06:00
Scott Lahteine
5bc2acc072 Restore position_float to fix LIN_ADVANCE 2017-12-21 16:45:46 -06:00
Scott Lahteine
fdc5e72720 A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Scott Lahteine
933f76fda3 Option to disable all volumetric extrusion 2017-12-19 19:51:25 -06:00
Scott Lahteine
fc9ee1a4de Fix up serial sanity check 2017-12-19 19:11:43 -06:00
Scott Lahteine
957bbab57f Update inc files for parity with 1.1.x 2017-12-16 20:20:06 -06:00
Dan Delaney
b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) 
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
 2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df Adding support for the Tronxy and Zonestar LCD 2017-12-15 19:13:52 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Scott Lahteine
a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine
ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
Scott Lahteine
f206b81cf7 Sanity check skew+UBL 2017-12-06 22:56:58 -06:00
Scott Lahteine
2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Richard Wackerbarth
c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
Unknown
91b63f6d69 SERIAL_XON_XOFF not supported on USB-native AVR devices 
User could enable SERIAL_XON_XOFF on USB-native devices and it would not be enabled without warning, but M115 would report the capability as available.
 2017-12-04 03:57:01 -08:00
Scott Lahteine
f9327534f8
Merge pull request #8634 from fiveangle/bf2_report_xonxoff 
[2.0.x] Report SERIAL_XON_XOFF in M115
 2017-12-03 02:18:50 -06:00