Reduce size of "only one" sanity checks
This commit is contained in:
Scott Lahteine
parent
8922b56b58
commit
5f77816772
@ -649,36 +649,18 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
||||
/**
|
||||
* Allow only one kinematic type to be defined
|
||||
*/
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(DELTA)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MORGAN_SCARA)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MAKERARM_SCARA)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREXY)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREXZ)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREYZ)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREYX)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREZX)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(COREZY)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
|
||||
);
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(DELTA) \
|
||||
+ ENABLED(MORGAN_SCARA) \
|
||||
+ ENABLED(MAKERARM_SCARA) \
|
||||
+ ENABLED(COREXY) \
|
||||
+ ENABLED(COREXZ) \
|
||||
+ ENABLED(COREYZ) \
|
||||
+ ENABLED(COREYX) \
|
||||
+ ENABLED(COREZX) \
|
||||
+ ENABLED(COREZY)
|
||||
#error "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Delta requirements
|
||||
@ -706,30 +688,16 @@ static_assert(1 >= 0
|
||||
/**
|
||||
* Allow only one probe option to be defined
|
||||
*/
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(PROBE_MANUALLY)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(FIX_MOUNTED_PROBE)
|
||||
+ 1
|
||||
#endif
|
||||
#if HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(BLTOUCH)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(SOLENOID_PROBE)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z_PROBE_ALLEN_KEY)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z_PROBE_SLED)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
|
||||
);
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(PROBE_MANUALLY) \
|
||||
+ ENABLED(FIX_MOUNTED_PROBE) \
|
||||
+ (HAS_Z_SERVO_ENDSTOP && DISABLED(BLTOUCH)) \
|
||||
+ ENABLED(BLTOUCH) \
|
||||
+ ENABLED(SOLENOID_PROBE) \
|
||||
+ ENABLED(Z_PROBE_ALLEN_KEY) \
|
||||
+ ENABLED(Z_PROBE_SLED)
|
||||
#error "Please enable only one probe option: PROBE_MANUALLY, FIX_MOUNTED_PROBE, BLTOUCH, SOLENOID_PROBE, Z_PROBE_ALLEN_KEY, Z_PROBE_SLED, or Z Servo."
|
||||
#endif
|
||||
|
||||
#if HAS_BED_PROBE
|
||||
|
||||
@ -820,24 +788,14 @@ static_assert(1 >= 0
|
||||
/**
|
||||
* Allow only one bed leveling option to be defined
|
||||
*/
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
+ 1
|
||||
#endif
|
||||
, "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
|
||||
);
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(AUTO_BED_LEVELING_LINEAR) \
|
||||
+ ENABLED(AUTO_BED_LEVELING_3POINT) \
|
||||
+ ENABLED(AUTO_BED_LEVELING_BILINEAR) \
|
||||
+ ENABLED(AUTO_BED_LEVELING_UBL) \
|
||||
+ ENABLED(MESH_BED_LEVELING)
|
||||
#error "Select only one of: MESH_BED_LEVELING, AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Bed Leveling Requirements
|
||||
@ -1382,8 +1340,8 @@ static_assert(1 >= 0
|
||||
* AZSMZ_12864 => ULTIMAKERCONTROLLER
|
||||
* PANEL_ONE => ULTIMAKERCONTROLLER
|
||||
*/
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(ULTIMAKERCONTROLLER) \
|
||||
#if 1 < 0 \
|
||||
+ ( ENABLED(ULTIMAKERCONTROLLER) \
|
||||
&& DISABLED(SAV_3DGLCD) \
|
||||
&& DISABLED(miniVIKI) \
|
||||
&& DISABLED(VIKI2) \
|
||||
@ -1391,115 +1349,46 @@ static_assert(1 >= 0
|
||||
&& DISABLED(AZSMZ_12864) \
|
||||
&& DISABLED(PANEL_ONE) \
|
||||
&& DISABLED(MKS_12864OLED) \
|
||||
&& DISABLED(MKS_12864OLED_SSD1306)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
|
||||
&& DISABLED(MKS_12864OLED_SSD1306) ) \
|
||||
+ ( ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
|
||||
&& DISABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
|
||||
&& DISABLED(LCD_FOR_MELZI) \
|
||||
&& DISABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
|
||||
&& DISABLED(MKS_12864OLED) \
|
||||
&& DISABLED(MKS_12864OLED_SSD1306)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) \
|
||||
&& DISABLED(BQ_LCD_SMART_CONTROLLER)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCD_FOR_MELZI)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MKS_12864OLED)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MKS_12864OLED_SSD1306)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(CARTESIO_UI)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(PANEL_ONE)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MAKRPANEL)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(VIKI2)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(miniVIKI)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(AZSMZ_12864)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(G3D_PANEL)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(MKS_MINI_12864)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(REPRAPWORLD_KEYPAD) \
|
||||
&& DISABLED(CARTESIO_UI) \
|
||||
&& DISABLED(ZONESTAR_LCD)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(RIGIDBOT_PANEL)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(RA_CONTROL_PANEL)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCD_SAINSMART_I2C_1602)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCD_SAINSMART_I2C_2004)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCM1602)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCD_I2C_PANELOLU2)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(LCD_I2C_VIKI)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2) && DISABLED(MKS_12864OLED_SSD1306)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(SAV_3DLCD)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(SAV_3DGLCD)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(OLED_PANEL_TINYBOY2)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(ZONESTAR_LCD)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(ULTI_CONTROLLER)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please select no more than one LCD controller option."
|
||||
);
|
||||
&& DISABLED(MKS_12864OLED_SSD1306) ) \
|
||||
+ (ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && DISABLED(BQ_LCD_SMART_CONTROLLER)) \
|
||||
+ ENABLED(LCD_FOR_MELZI) \
|
||||
+ ENABLED(MKS_12864OLED) \
|
||||
+ ENABLED(MKS_12864OLED_SSD1306) \
|
||||
+ ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602) \
|
||||
+ ENABLED(CARTESIO_UI) \
|
||||
+ ENABLED(PANEL_ONE) \
|
||||
+ ENABLED(MAKRPANEL) \
|
||||
+ ENABLED(REPRAPWORLD_GRAPHICAL_LCD) \
|
||||
+ ENABLED(VIKI2) \
|
||||
+ ENABLED(miniVIKI) \
|
||||
+ ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
|
||||
+ ENABLED(AZSMZ_12864) \
|
||||
+ ENABLED(G3D_PANEL) \
|
||||
+ (ENABLED(MINIPANEL) && DISABLED(MKS_MINI_12864)) \
|
||||
+ ENABLED(MKS_MINI_12864) \
|
||||
+ (ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(CARTESIO_UI) && DISABLED(ZONESTAR_LCD)) \
|
||||
+ ENABLED(RIGIDBOT_PANEL) \
|
||||
+ ENABLED(RA_CONTROL_PANEL) \
|
||||
+ ENABLED(LCD_SAINSMART_I2C_1602) \
|
||||
+ ENABLED(LCD_SAINSMART_I2C_2004) \
|
||||
+ ENABLED(LCM1602) \
|
||||
+ ENABLED(LCD_I2C_PANELOLU2) \
|
||||
+ ENABLED(LCD_I2C_VIKI) \
|
||||
+ (ENABLED(U8GLIB_SSD1306) && DISABLED(OLED_PANEL_TINYBOY2) && DISABLED(MKS_12864OLED_SSD1306)) \
|
||||
+ ENABLED(SAV_3DLCD) \
|
||||
+ ENABLED(BQ_LCD_SMART_CONTROLLER) \
|
||||
+ ENABLED(SAV_3DGLCD) \
|
||||
+ ENABLED(OLED_PANEL_TINYBOY2) \
|
||||
+ ENABLED(ZONESTAR_LCD) \
|
||||
+ ENABLED(ULTI_CONTROLLER)
|
||||
#error "Please select no more than one LCD controller option."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Make sure HAVE_TMC26X is warranted
|
||||
@ -1604,6 +1493,24 @@ static_assert(1 >= 0
|
||||
#error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI)
|
||||
*/
|
||||
#if ENABLED(HAVE_TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \
|
||||
defined(X_HARDWARE_SERIAL ) \
|
||||
|| defined(X2_HARDWARE_SERIAL) \
|
||||
|| defined(Y_HARDWARE_SERIAL ) \
|
||||
|| defined(Y2_HARDWARE_SERIAL) \
|
||||
|| defined(Z_HARDWARE_SERIAL ) \
|
||||
|| defined(Z2_HARDWARE_SERIAL) \
|
||||
|| defined(E0_HARDWARE_SERIAL) \
|
||||
|| defined(E1_HARDWARE_SERIAL) \
|
||||
|| defined(E2_HARDWARE_SERIAL) \
|
||||
|| defined(E3_HARDWARE_SERIAL) \
|
||||
|| defined(E4_HARDWARE_SERIAL) )
|
||||
#error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE."
|
||||
#endif
|
||||
|
||||
#if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP)
|
||||
#error "Enable STEALTHCHOP to use HYBRID_THRESHOLD."
|
||||
#endif
|
||||
@ -1634,171 +1541,83 @@ static_assert(1 >= 0
|
||||
/**
|
||||
* Check that each axis has only one driver selected
|
||||
*/
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(X_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the X axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(X2_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X2_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X2_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(X2_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the X2 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(Y_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the Y axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(Y2_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Y2_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the Y2 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(Z_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the Z axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(Z2_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(Z2_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the Z2 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(E0_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E0_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E0_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E0_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the E0 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(E1_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E1_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E1_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E1_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the E1 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(E2_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E2_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E2_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E2_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the E2 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(E3_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E3_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E3_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E3_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the E3 axis."
|
||||
);
|
||||
static_assert(1 >= 0
|
||||
#if ENABLED(E4_IS_TMC26X)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E4_IS_TMC2130)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E4_IS_TMC2208)
|
||||
+ 1
|
||||
#endif
|
||||
#if ENABLED(E4_IS_L6470)
|
||||
+ 1
|
||||
#endif
|
||||
, "Please enable only one stepper driver for the E4 axis."
|
||||
);
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(X_IS_TMC26X) \
|
||||
+ ENABLED(X_IS_TMC2130) \
|
||||
+ ENABLED(X_IS_TMC2208) \
|
||||
+ ENABLED(X_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the X axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(X2_IS_TMC26X) \
|
||||
+ ENABLED(X2_IS_TMC2130) \
|
||||
+ ENABLED(X2_IS_TMC2208) \
|
||||
+ ENABLED(X2_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the X2 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(Y_IS_TMC26X) \
|
||||
+ ENABLED(Y_IS_TMC2130) \
|
||||
+ ENABLED(Y_IS_TMC2208) \
|
||||
+ ENABLED(Y_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the Y axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(Y2_IS_TMC26X) \
|
||||
+ ENABLED(Y2_IS_TMC2130) \
|
||||
+ ENABLED(Y2_IS_TMC2208) \
|
||||
+ ENABLED(Y2_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the Y2 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(Z_IS_TMC26X) \
|
||||
+ ENABLED(Z_IS_TMC2130) \
|
||||
+ ENABLED(Z_IS_TMC2208) \
|
||||
+ ENABLED(Z_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the Z axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(Z2_IS_TMC26X) \
|
||||
+ ENABLED(Z2_IS_TMC2130) \
|
||||
+ ENABLED(Z2_IS_TMC2208) \
|
||||
+ ENABLED(Z2_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the Z2 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(E0_IS_TMC26X) \
|
||||
+ ENABLED(E0_IS_TMC2130) \
|
||||
+ ENABLED(E0_IS_TMC2208) \
|
||||
+ ENABLED(E0_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the E0 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(E1_IS_TMC26X) \
|
||||
+ ENABLED(E1_IS_TMC2130) \
|
||||
+ ENABLED(E1_IS_TMC2208) \
|
||||
+ ENABLED(E1_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the E1 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(E2_IS_TMC26X) \
|
||||
+ ENABLED(E2_IS_TMC2130) \
|
||||
+ ENABLED(E2_IS_TMC2208) \
|
||||
+ ENABLED(E2_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the E2 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(E3_IS_TMC26X) \
|
||||
+ ENABLED(E3_IS_TMC2130) \
|
||||
+ ENABLED(E3_IS_TMC2208) \
|
||||
+ ENABLED(E3_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the E3 axis."
|
||||
#endif
|
||||
#if 1 < 0 \
|
||||
+ ENABLED(E4_IS_TMC26X) \
|
||||
+ ENABLED(E4_IS_TMC2130) \
|
||||
+ ENABLED(E4_IS_TMC2208) \
|
||||
+ ENABLED(E4_IS_L6470)
|
||||
#error "Please enable only one stepper driver for the E4 axis."
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Digipot requirement
|
||||
|
||||
Loading…
Reference in New Issue
Block a user