Scott Lahteine
e7a9f17371
Tweak serial port descriptions
2020-03-21 23:38:44 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
Scott Lahteine
0578e9b16e
Move SENSORLESS_PROBING to the probes section
...
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
InsanityAutomation
cc1ff27256
Bump config version to 020004 ( #16816 )
2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test ( #16511 )
2020-02-05 20:33:39 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0
Bring configs and drivers.h up to date
2020-01-24 23:17:52 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
Scott Lahteine
ea7363a8f4
Update more configs
2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Scott Lahteine
00c83e9ca6
Update comments re: NOZZLE_AS_PROBE
2020-01-01 19:41:23 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
Scott Lahteine
af4c62b422
Update product links
2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444
Update AZSMZ LCD link ( #16106 )
2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886
Tweak NOZZLE_CLEAN_START_POINT spacing
2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4
Tweak REPRAPWORLD_KEYPAD config comment
2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6
Bring Configuration.h up to date
2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen ( #15057 )
2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese ( #13892 )
2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b
Adding HMS434 machine ( #14931 )
2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5
Fix #define typo in configs
2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25
Overlord printer thermistor ( #14815 )
2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630
HAL cleanup, Teensy 3.1 platform
2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da
Overlord i2c LCD with LEDs and buzzer ( #14801 )
2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57
Option to reverse select direction/buttons ( #14693 )
2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd
More general FSMC display option
2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f
More general TOUCH_BUTTONS comment
2019-07-30 04:22:27 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293
Add support for 2 Neopixel strips ( #14667 )
2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f
Improve magnetic dock switching toolhead ( #14663 )
2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47
Robin & Longer3D SPI TFT driver ( #14595 )
2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f
Shorten some config descriptions
2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17
OLED LCD section
2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638
RPW-Ultra thermistor table ( #14517 )
2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3
Park heads with electromagnet ( #14023 )
2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b
Add links to Junction Deviation heading ( #14272 )
2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3
Touch-MI Menu and Manual Deploy option ( #14290 )
2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f
Add temperature-based auto power options ( #14397 )
2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a
Support DGUS Display with DWIN OS ( #13253 )
2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5
Tweak some config spacing
2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0
SKRmini followup - Fysetc config updates ( #14327 )
2019-06-20 05:49:27 -05:00
Scott Lahteine
aacb904e1f
Adjust some config comments
2019-06-17 20:22:07 -05:00
Tanguy Pruvot
f2cfa408b7
Touch-MI probe by hotends.fr ( #14101 )
...
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
InsanityAutomation
b7eeb5b13b
Move BLTouch options to adv config ( #14131 )
...
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
InsanityAutomation
f6ec00d776
Update thermistor and working config
2019-06-04 20:25:00 -04:00
InsanityAutomation
49e83dd7c8
BLTouch V3.1 changes ( #14104 )
2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2
Update Z probe offset comment
2019-05-25 19:41:15 -05:00
Bob Kuhn
1dad6e754b
Neopixel background LED option ( #14025 )
2019-05-18 02:36:37 -05:00
InsanityAutomation
6811e2921b
BLTouch v3 / 3DTouch Interoperability & performance ( #13814 )
2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f
Option to Auto-Initialize EEPROM ( #13935 )
2019-05-07 16:30:31 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881
Bring chamber temp to completion ( #13837 )
2019-05-04 22:51:47 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions ( #13871 )
2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c
Simpler neopixel comment
2019-05-01 13:55:51 -05:00
Scott Lahteine
6ff81a33c1
Provide JSON values for SOFT_PWM_SCALE
2019-04-22 14:06:14 -05:00
Bob Kuhn
81ca5a4cd4
Fix and improve FYSETC LCD support ( #13767 )
2019-04-21 20:48:53 -05:00
Robby Candra
7ca1fea22b
Option to pause probe deployment only when triggered, for manually-deployed allen-key probe ( #13698 )
2019-04-16 01:32:43 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
chai-md
2adc37becc
MAGNETIC_SWITCHING_TOOLHEAD ( #13629 )
2019-04-11 13:29:17 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL ( #13365 )
2019-04-09 18:34:29 -05:00
Scott Lahteine
a2b3ad6d0a
Don't override RGB LED pins, by default
2019-04-07 16:42:26 -05:00
Scott Lahteine
3221658a78
Adjust park position description
2019-04-05 20:40:50 -05:00
Scott Lahteine
b46ca9aa94
Less timely comment, tweak conditions
2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725
Update descriptions and dont call unneeded functions
2019-03-26 11:24:52 -04:00
drzejkopf
70e6a3db8a
Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS ( #13439 )
2019-03-20 18:26:12 -05:00
InsanityAutomation
691e5c3bb8
BLTouch V3.0 support ( #13406 )
2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Andrei Pozolotin
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
2019-03-11 16:50:07 -05:00
Scott Lahteine
98b55421a5
Clean up some temp config
2019-03-11 16:31:23 -05:00
InsanityAutomation
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option ( #13276 )
2019-03-01 00:27:45 -06:00
InsanityAutomation
e2e2a55d9b
Add thermistor type 67 SliceEng ( #13275 )
2019-02-28 19:44:17 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) ( #13022 )
2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611
PID_MENU option to save PROGMEM in LCD menus ( #13095 )
2019-02-10 04:03:18 -06:00
Scott Lahteine
f3b6cb4d34
Clean up, update config comments
2019-02-08 15:13:52 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf
MAGNETIC_PARKING_EXTRUDER ( #12351 )
2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc
Support SWITCHING_NOZZLE with 2 servos ( #13054 )
2019-02-04 00:19:56 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
Marcio Teixeira
f214118e45
Action to notify host of filament runout. ( #12817 )
2019-01-27 20:18:05 -06:00
mikeshub
7fde8d9d1e
Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support ( #12855 )
...
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Ondřej Nový
a0ef6198ff
Level bed corners Z-hop height option ( #12858 )
2019-01-10 19:15:17 -06:00
jmz52
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
InsanityAutomation
367a9f65aa
Add Formbot 350c Thermistor ( #12661 )
2018-12-20 17:04:17 -06:00
Ludy
a7b3a61424
Improve some config comments readability ( #12615 )
2018-12-09 19:02:42 -06:00
Scott Lahteine
4388015f1a
Tweak config formatting
2018-12-07 16:57:14 -06:00
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
KangDroid
82ff7c6542
Add a mesh edit menu for MBL / ABL-Bilinear
2018-11-04 19:07:47 -06:00
Scott Lahteine
9cd3529108
Organize language data, fix Korean and Danish
2018-10-30 20:41:16 -05:00
Scott Lahteine
9e663a624b
Apply #pragma once to configuration files
2018-10-30 18:35:12 -05:00
Chris Rigter
3028a620af
Add RACK_AND_PINION_PROBE ( #12218 )
2018-10-26 18:24:24 -05:00
Scott Lahteine
e229b831fa
Customizable preheat labels
2018-10-23 00:57:50 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Marcio Teixeira
056561df93
[2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR ( #12069 )
...
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
2018-10-16 07:28:52 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise ( #12076 )
2018-10-13 23:08:20 -05:00
Scott Lahteine
af3bf6c956
Tweak config spacing
2018-10-12 16:09:27 -05:00
Marcio Teixeira
906a24fa81
Extensible user interface API ( #11193 )
2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4
Various fixups for single-nozzle filament swap ( #12036 )
2018-10-08 15:39:55 -05:00
Sam Lane
f2ecf8d510
Add option to control Solenoids under PARKING_EXTRUDER ( #12028 )
2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc
Single nozzle filament change ( #11994 )
2018-10-07 17:06:14 -05:00
Scott Lahteine
bb561baf9e
Tweak some config comments
2018-10-04 02:42:12 -05:00
brian park
2abf3d258d
Korean language translation support ( #11987 )
2018-10-03 01:53:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF ( #11984 )
...
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695
Make DISABLE_INACTIVE_EXTRUDER a simple switch
2018-10-02 04:57:03 -05:00
Scott Lahteine
aa6e8e9325
Tweak some config comments
2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold ( #11912 )
2018-09-24 21:59:12 -04:00
Scott Lahteine
6742026568
Followup for 6 extruders
2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115
Add a blank line
2018-09-24 12:49:02 -04:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW ( #11905 )
2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8
Move probe extras below probe types
2018-09-23 23:23:07 -04:00
Hannes Brandstätter-Müller
a4cdffdd69
Support for manually deployed fixed probes ( #11899 )
2018-09-23 19:59:08 -04:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors ( #11861 )
2018-09-18 01:10:41 -05:00
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Kevin
e25d2ae4a2
[2.0.x] SWITCHING_TOOLHEAD ( #11623 )
2018-09-08 01:43:24 -05:00
Scott Lahteine
2a61c9a939
Various fixups to configs, spacing, etc.
2018-09-06 06:44:31 -05:00
Scott Lahteine
3e81745e81
Fix issues, make optional
2018-08-29 17:58:02 -05:00
Scott Lahteine
66966dbd69
Tweak comments for newer multiplexer
2018-08-25 17:00:49 -05:00
Kevin
6483285bc5
HOTEND_OFFSET_Z always available ( #11603 )
2018-08-22 00:21:29 -05:00
Scott Lahteine
bd6d032628
Update default driver configuration
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
846bd24eb9
MALYAN_LCD is ok without SD
2018-08-14 05:31:47 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Giuliano
bd3ec66a78
[2.0.x] typo fix ( #11365 )
...
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Scott Lahteine
14e2b11195
Fix spelling in configs
2018-07-24 21:03:38 -05:00
Scott Lahteine
2106fa26b1
Add MANUAL_PROBE_START_Z for manual probing
2018-07-18 21:49:20 -05:00
Scott Lahteine
25e2ca8896
Add Z_CLEARANCE_MULTI_PROBE
...
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Chris Pepper
cbea385ed7
[2.0.x] Fix LCD_LANGUAGE options list formatting in config ( #11198 )
...
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
568cfe7caa
Add thermistor 501 (100K Zonestar)
2018-07-03 17:52:06 -05:00
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
Scott Lahteine
aaaf09bda2
BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION
2018-05-26 18:33:51 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter ( #10796 )
2018-05-21 15:51:38 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it ( #10748 )
2018-05-14 21:38:24 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type ( #10630 )
2018-05-06 19:16:55 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
b7e938a9fb
LCD_BED_LEVELING enables a sub-menu for ABL
2018-05-01 07:13:56 -05:00
Scott Lahteine
c87b0e21be
Add units to probe speed comments
2018-04-30 23:50:28 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS ( #10483 )
2018-04-22 02:50:48 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing ( #10472 )
2018-04-21 15:43:21 -05:00
KangDroid
6c535081ec
[2.0.x] Add optional menu item to toggle software endstops ( #10389 )
2018-04-13 00:24:09 -05:00
Yunhui Fu
c96412a78f
[2.0.x] UTF-8 language translation support ( #10213 )
2018-04-12 20:14:01 -05:00
Scott Lahteine
8b8ad14178
Add Z_PROBE_LOW_POINT to prevent damage
2018-04-09 17:23:03 -05:00
Scott Lahteine
dca69efc11
Update Bed PID comments
2018-04-08 06:44:47 -05:00
etagle
a29adde5c0
Implement BEZIER_JERK_CONTROL
...
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
adcb87f0db
Z Endstop Servo => Z Probe Servo
2018-04-01 23:54:21 -05:00
Scott Lahteine
dd2949922b
Consolidate 3-point leveling point options
2018-03-19 04:12:20 -05:00
Scott Lahteine
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) ( #10069 )
...
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option ( #10058 )
...
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
419d12ca1b
Add UNKNOWN_Z_NO_RAISE option
...
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
Scott Lahteine
a2a672449a
Updated boot screen description
2018-03-03 20:04:17 -06:00
Scott Lahteine
4953fb1c88
Standardize encoder defaults
2018-02-24 22:34:45 -06:00
Scott Lahteine
5684beae90
Bring some configs up to speed
2018-02-24 21:56:27 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language ( #9786 )
...
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
