bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity

Update and fix DGUS (#16317)

Browse Source
This commit is contained in:
George Fu 2020-01-04 11:00:44 +08:00 committed by Scott Lahteine
parent 7f87a044cd
commit e593da1c23
311 changed files with 8501 additions and 820 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Marlin/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
Marlin/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

13
Marlin/src/HAL/HAL_AVR/HAL.h
View File

@ -109,6 +109,19 @@ typedef int8_t pin_t;
#endif
#endif
#ifdef DGUS_SERIAL_PORT
#if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#endif
#define DGUS_SERIAL internalDgusSerial
#define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
#endif
// ------------------------
// Public functions
// ------------------------

27
Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
View File

@ -757,6 +757,33 @@
#endif
#ifdef DGUS_SERIAL_PORT
template<typename Cfg>
typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
const ring_buffer_pos_t t = tx_buffer.tail, // next byte to send.
h = tx_buffer.head; // next pos for queue.
int ret = t - h - 1;
if (ret < 0) ret += Cfg::TX_SIZE + 1;
return ret;
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::store_rxd_char();
}
ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) {
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::_tx_udr_empty_irq();
}
// Preinstantiate
template class MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>;
// Instantiate
MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
#endif
// For AT90USB targets use the UART for BT interfacing
#if defined(USBCON) && ENABLED(BLUETOOTH)
HardwareSerial bluetoothSerial;

20
Marlin/src/HAL/HAL_AVR/MarlinSerial.h
View File

@ -217,6 +217,9 @@
static ring_buffer_pos_t available();
static void write(const uint8_t c);
static void flushTX();
#ifdef DGUS_SERIAL_PORT
static ring_buffer_pos_t get_tx_buffer_free();
#endif
FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
@ -292,6 +295,23 @@
extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
#endif
#ifdef DGUS_SERIAL_PORT
template <uint8_t serial>
struct MarlinInternalSerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = 128;
static constexpr unsigned int TX_SIZE = 48;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_OVERRUNS = bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
};
extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
#endif
// Use the UART for Bluetooth in AT90USB configurations
#if defined(USBCON) && ENABLED(BLUETOOTH)
extern HardwareSerial bluetoothSerial;

21
Marlin/src/HAL/HAL_DUE/HAL.h
View File

@ -74,6 +74,27 @@
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL internalDgusSerial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL Serial3
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif
#include "MarlinSerial.h"
#include "MarlinSerialUSB.h"

20
Marlin/src/HAL/HAL_LPC1768/HAL.h
View File

@ -96,6 +96,26 @@ extern "C" volatile uint32_t _millis;
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL UsbSerial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL MSerial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL MSerial3
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif
//
// Interrupts
//

20
Marlin/src/HAL/HAL_SAMD51/HAL.h
View File

@ -71,6 +71,26 @@
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL Serial
#elif DGUS_SERIAL_PORT == 0
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial3
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial4
#else
#error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#endif
#endif // ADAFRUIT_GRAND_CENTRAL_M4
typedef int8_t pin_t;

28
Marlin/src/HAL/HAL_STM32/HAL.h
View File

@ -90,6 +90,34 @@
#define NUM_SERIAL 1
#endif
#if HAS_DGUS_LCD
#if DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL SerialUSB
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL Serial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL Serial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL Serial3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL Serial4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL Serial5
#elif DGUS_SERIAL_PORT == 6
#define DGUS_SERIAL Serial6
#else
#error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif
#define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.availableForWrite
#endif
#include "timers.h"
/**

25
Marlin/src/HAL/HAL_STM32F1/HAL.h
View File

@ -121,6 +121,31 @@
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL
#if DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL UsbSerial
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL MSerial1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL MSerial2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL MSerial3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL MSerial4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL MSerial5
#else
#error "DGUS_SERIAL_PORT must be from -1 to 5. Please update your configuration."
#endif
#endif
// Set interrupt grouping for this MCU
void HAL_init();
#define HAL_IDLETASK 1

26
Marlin/src/HAL/HAL_STM32_F4_F7/HAL.h
View File

@ -94,6 +94,32 @@
#define NUM_SERIAL 1
#endif
#ifdef DGUS_SERIAL_PORT
#if defined(STM32F4) && DGUS_SERIAL_PORT == 0
#error "DGUS_SERIAL_PORT cannot be 0. (Port 0 does not exist.) Please update your configuration."
#elif DGUS_SERIAL_PORT == SERIAL_PORT
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
#elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
#error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
#elif DGUS_SERIAL_PORT == -1
#define DGUS_SERIAL SerialUSB
#elif DGUS_SERIAL_PORT == 1
#define DGUS_SERIAL SerialUART1
#elif DGUS_SERIAL_PORT == 2
#define DGUS_SERIAL SerialUART2
#elif DGUS_SERIAL_PORT == 3
#define DGUS_SERIAL SerialUART3
#elif DGUS_SERIAL_PORT == 4
#define DGUS_SERIAL SerialUART4
#elif DGUS_SERIAL_PORT == 5
#define DGUS_SERIAL SerialUART5
#elif DGUS_SERIAL_PORT == 6
#define DGUS_SERIAL SerialUART6
#else
#error "DGUS_SERIAL_PORT must be from -1 to 6. Please update your configuration."
#endif
#endif
/**
* TODO: review this to return 1 for pins that are not analog input
*/

7
Marlin/src/HAL/shared/MarlinSerial.h
View File

@ -28,6 +28,13 @@
#include "../../inc/MarlinConfigPre.h"
constexpr bool
#if HAS_DGUS_LCD
bDGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS = (false
#if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS)
|| true
#endif
),
#endif
bSERIAL_XON_XOFF = (false
#if ENABLED(SERIAL_XON_XOFF)
|| true

5
Marlin/src/gcode/feature/powerloss/M1000.cpp
View File

@ -28,6 +28,9 @@
#include "../../../feature/power_loss_recovery.h"
#include "../../../module/motion.h"
#include "../../../lcd/ultralcd.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../../lcd/extensible_ui/ui_api.h"
#endif
#define DEBUG_OUT ENABLED(DEBUG_POWER_LOSS_RECOVERY)
#include "../../../core/debug_out.h"
@ -55,6 +58,8 @@ void GcodeSuite::M1000() {
if (parser.seen('S')) {
#if HAS_LCD_MENU
ui.goto_screen(menu_job_recovery);
#elif ENABLED(EXTENSIBLE_UI)
ExtUI::OnPowerLossResume();
#else
SERIAL_ECHO_MSG("Resume requires LCD.");
#endif

7
Marlin/src/gcode/temperature/M303.cpp
View File

@ -27,6 +27,10 @@
#include "../gcode.h"
#include "../../module/temperature.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../lcd/extensible_ui/ui_api.h"
#endif
/**
* M303: PID relay autotune
*
@ -49,6 +53,9 @@ void GcodeSuite::M303() {
const heater_ind_t e = (heater_ind_t)parser.intval('E');
if (!WITHIN(e, SI, EI)) {
SERIAL_ECHOLNPGM(MSG_PID_BAD_EXTRUDER_NUM);
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_BAD_EXTRUDER_NUM);
#endif
return;
}

1
Marlin/src/inc/Conditionals_LCD.h
View File

@ -359,6 +359,7 @@
#define HAS_CHARACTER_LCD (HAS_SPI_LCD && !HAS_GRAPHICAL_LCD)
#define HAS_LCD_MENU (ENABLED(ULTIPANEL) && DISABLED(NO_LCD_MENUS))
#define HAS_ADC_BUTTONS ENABLED(ADC_KEYPAD)
#define HAS_DGUS_LCD ANY(DGUS_LCD_UI_ORIGIN, DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
/**
* Extruders have some combination of stepper motors and hotends

6
Marlin/src/inc/SanityCheck.h
View File

@ -424,6 +424,8 @@
#error "FILAMENT_UNLOAD_DELAY is now FILAMENT_UNLOAD_PURGE_DELAY. Please update Configuration_adv.h."
#elif defined(HOME_USING_SPREADCYCLE)
#error "HOME_USING_SPREADCYCLE is now obsolete. Please remove it from Configuration_adv.h."
#elif defined(DGUS_LCD)
#error "DGUS_LCD is now DGUS_LCD_UI_(ORIGIN|FYSETC|HIPRECY). Please update your configuration."
#endif
/**
@ -1910,7 +1912,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
+ ENABLED(MKS_12864OLED_SSD1306) \
+ ENABLED(U8GLIB_SH1106_EINSTART) \
+ ENABLED(OVERLORD_OLED) \
+ ENABLED(DGUS_LCD) \
+ ENABLED(DGUS_LCD_UI_ORIGIN) \
+ ENABLED(DGUS_LCD_UI_FYSETC) \
+ ENABLED(DGUS_LCD_UI_HIPRECY) \
+ ENABLED(MALYAN_LCD) \
+ ENABLED(TOUCH_UI_FTDI_EVE) \
+ ENABLED(FSMC_GRAPHICAL_TFT)

922
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.cpp
View File

File diff suppressed because it is too large Load Diff

75
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplay.h
View File

@ -116,10 +116,52 @@ public:
static void HandleTemperatureChanged(DGUS_VP_Variable &var, void *val_ptr);
// Hook for "Change Flowrate"
static void HandleFlowRateChanged(DGUS_VP_Variable &var, void *val_ptr);
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
// Hook for manual move option
static void HandleManualMoveOption(DGUS_VP_Variable &var, void *val_ptr);
#endif
// Hook for manual move.
static void HandleManualMove(DGUS_VP_Variable &var, void *val_ptr);
// Hook for manual extrude.
static void HandleManualExtrude(DGUS_VP_Variable &var, void *val_ptr);
// Hook for motor lock and unlook
static void HandleMotorLockUnlock(DGUS_VP_Variable &var, void *val_ptr);
#if ENABLED(POWER_LOSS_RECOVERY)
// Hook for power loss recovery.
static void HandlePowerLossRecovery(DGUS_VP_Variable &var, void *val_ptr);
#endif
// Hook for settings
static void HandleSettings(DGUS_VP_Variable &var, void *val_ptr);
static void HandleStepPerMMChanged(DGUS_VP_Variable &var, void *val_ptr);
static void HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, void *val_ptr);
#if HAS_PID_HEATING
// Hook for "Change this temperature PID para"
static void HandleTemperaturePIDChanged(DGUS_VP_Variable &var, void *val_ptr);
// Hook for PID autotune
static void HandlePIDAutotune(DGUS_VP_Variable &var, void *val_ptr);
#endif
// Hook for "Change probe offset z"
static void HandleProbeOffsetZChanged(DGUS_VP_Variable &var, void *val_ptr);
#if ENABLED(BABYSTEPPING)
// Hook for live z adjust action
static void HandleLiveAdjustZ(DGUS_VP_Variable &var, void *val_ptr);
#endif
#if FAN_COUNT > 0
// Hook for fan control
static void HandleFanControl(DGUS_VP_Variable &var, void *val_ptr);
#endif
// Hook for heater control
static void HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr);
#if ENABLED(DGUS_PREHEAT_UI)
// Hook for preheat
static void HandlePreheat(DGUS_VP_Variable &var, void *val_ptr);
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
// Hook for filament load and unload filament option
static void HandleFilamentOption(DGUS_VP_Variable &var, void *val_ptr);
// Hook for filament load and unload
static void HandleFilamentLoadUnload(DGUS_VP_Variable &var);
#endif
#if ENABLED(SDSUPPORT)
// Callback for VP "Display wants to change screen when there is a SD card"
@ -134,6 +176,8 @@ public:
static void DGUSLCD_SD_ResumePauseAbort(DGUS_VP_Variable &var, void *val_ptr);
/// User confirmed the abort action
static void DGUSLCD_SD_ReallyAbort(DGUS_VP_Variable &var, void *val_ptr);
/// User hit the tune button
static void DGUSLCD_SD_PrintTune(DGUS_VP_Variable &var, void *val_ptr);
/// Send a single filename to the display.
static void DGUSLCD_SD_SendFilename(DGUS_VP_Variable &var);
/// Marlin informed us that a new SD has been inserted.
@ -164,8 +208,20 @@ public:
static void DGUSLCD_SendWordValueToDisplay(DGUS_VP_Variable &var);
static void DGUSLCD_SendStringToDisplay(DGUS_VP_Variable &var);
static void DGUSLCD_SendStringToDisplayPGM(DGUS_VP_Variable &var);
static void DGUSLCD_SendTemperaturePID(DGUS_VP_Variable &var);
static void DGUSLCD_SendPercentageToDisplay(DGUS_VP_Variable &var);
static void DGUSLCD_SendPrintTimeToDisplay(DGUS_VP_Variable &var);
#if ENABLED(PRINTCOUNTER)
static void DGUSLCD_SendPrintAccTimeToDisplay(DGUS_VP_Variable &var);
static void DGUSLCD_SendPrintsTotalToDisplay(DGUS_VP_Variable &var);
#endif
#if FAN_COUNT > 0
static void DGUSLCD_SendFanStatusToDisplay(DGUS_VP_Variable &var);
#endif
static void DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var);
#if ENABLED(DGUS_UI_WAITING)
static void DGUSLCD_SendWaitingStatusToDisplay(DGUS_VP_Variable &var);
#endif
/// Send a value from 0..100 to a variable with a range from 0..255
static void DGUSLCD_PercentageToUint8(DGUS_VP_Variable &var, void *val_ptr);
@ -199,6 +255,25 @@ public:
}
}
/// Send a float value to the display.
/// Display will get a 2-byte integer scaled to the number of digits:
/// Tell the display the number of digits and it cheats by displaying a dot between...
template<unsigned int decimals>
static void DGUSLCD_SendFloatAsIntValueToDisplay(DGUS_VP_Variable &var) {
if (var.memadr) {
float f = *(float *)var.memadr;
DEBUG_ECHOLNPAIR_F(" >> ", f, 6);
f *= cpow(10, decimals);
union { int16_t i; char lb[2]; } endian;
char tmp[2];
endian.i = f;
tmp[0] = endian.lb[1];
tmp[1] = endian.lb[0];
dgusdisplay.WriteVariable(var.VP, tmp, 2);
}
}
/// Force an update of all VP on the current screen.
static inline void ForceCompleteUpdate() { update_ptr = 0; ScreenComplete = false; }
/// Has all VPs sent to the screen

158
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.h
View File

@ -38,155 +38,13 @@ struct VPMapping {
extern const struct VPMapping VPMap[];
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 0,
DGUSLCD_SCREEN_MAIN = 10,
DGUSLCD_SCREEN_TEMPERATURE = 20,
DGUSLCD_SCREEN_STATUS = 30,
DGUSLCD_SCREEN_STATUS2 = 32,
DGUSLCD_SCREEN_MANUALMOVE = 40,
DGUSLCD_SCREEN_MANUALEXTRUDE=42,
DGUSLCD_SCREEN_FANANDFEEDRATE = 44,
DGUSLCD_SCREEN_FLOWRATES = 46,
DGUSLCD_SCREEN_SDFILELIST = 50,
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 52,
DGUSLCD_SCREEN_CONFIRM = 240,
DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
DGUSLDC_SCREEN_UNUSED = 255
};
// Display Memory layout used (T5UID)
// Except system variables this is arbitrary, just to organize stuff....
// 0x0000 .. 0x0FFF -- System variables and reserved by the display
// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
// so that we can keep variables nicely together in the address space.
// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
constexpr uint16_t VP_MSGSTR1 = 0x1100;
constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
constexpr uint16_t VP_MSGSTR2 = 0x1140;
constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
constexpr uint16_t VP_MSGSTR3 = 0x1180;
constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
constexpr uint16_t VP_MSGSTR4 = 0x11C0;
constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
// Screenchange request for screens that only make sense when printer is idle.
// e.g movement is only allowed if printer is not printing.
// Marlin must confirm by setting the screen manually.
constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
// Buttons on the SD-Card File listing.
constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
constexpr uint16_t VP_MOVE_X = 0x2100;
constexpr uint16_t VP_MOVE_Y = 0x2102;
constexpr uint16_t VP_MOVE_Z = 0x2104;
constexpr uint16_t VP_MOVE_E0 = 0x2110;
constexpr uint16_t VP_MOVE_E1 = 0x2112;
//constexpr uint16_t VP_MOVE_E2 = 0x2114;
//constexpr uint16_t VP_MOVE_E3 = 0x2116;
//constexpr uint16_t VP_MOVE_E4 = 0x2118;
//constexpr uint16_t VP_MOVE_E5 = 0x211A;
constexpr uint16_t VP_HOME_ALL = 0x2120;
// Firmware version on the boot screen.
constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
// Place for status messages.
constexpr uint16_t VP_M117 = 0x3020;
constexpr uint8_t VP_M117_LEN = 0x20;
// Temperatures.
constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer
constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer
constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer
// reserved to support up to 6 Extruders:
//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer
//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer
//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer
//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer
//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer
//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer
//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer
constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer
// reserved for up to 6 Extruders:
//constexpr uint16_t VP_Flowrate_E2 = 0x3094;
//constexpr uint16_t VP_Flowrate_E3 = 0x3096;
//constexpr uint16_t VP_Flowrate_E4 = 0x3098;
//constexpr uint16_t VP_Flowrate_E5 = 0x309A;
constexpr uint16_t VP_Fan_Percentage = 0x3100; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Feedrate_Percentage = 0x3102; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintProgress_Percentage = 0x3104; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintTime = 0x3106;
constexpr uint16_t VP_PrintTime_LEN = 10;
// Actual Position
constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
// SDCard File Listing
constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there.
constexpr uint16_t VP_SD_FileName0 = 0x3200;
constexpr uint16_t VP_SD_FileName1 = 0x3220;
constexpr uint16_t VP_SD_FileName2 = 0x3240;
constexpr uint16_t VP_SD_FileName3 = 0x3260;
constexpr uint16_t VP_SD_FileName4 = 0x3280;
// SPs for certain variables...
// located at 0x5000 and up
// Not used yet!
// This can be used e.g to make controls / data display invisible
constexpr uint16_t SP_T_E0_Is = 0x5000;
constexpr uint16_t SP_T_E0_Set = 0x5010;
constexpr uint16_t SP_T_E1_Is = 0x5020;
constexpr uint16_t SP_T_Bed_Is = 0x5030;
constexpr uint16_t SP_T_Bed_Set = 0x5040;
// List of VPs handled by Marlin / The Display.
extern const struct DGUS_VP_Variable ListOfVP[];
#if ENABLED(DGUS_LCD_UI_ORIGIN)
#include "DGUSDisplayDefinitionOrigin.h"
#elif ENABLED(DGUS_LCD_UI_FYSETC)
#include "DGUSDisplayDefinitionFYSETC.h"
#elif ENABLED(DGUS_LCD_UI_HIPRECY)
#include "DGUSDisplayDefinitionHIPRECY.h"
#endif

476
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.cpp Normal file
View File

@ -0,0 +1,476 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/* DGUS VPs changed by George Fu in 2019 for Marlin */
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(DGUS_LCD_UI_FYSETC)
#include "DGUSDisplayDefinition.h"
#include "DGUSDisplay.h"
#include "../../../../module/temperature.h"
#include "../../../../module/motion.h"
#include "../../../../module/planner.h"
#include "../../ui_api.h"
#include "../../../ultralcd.h"
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
uint16_t distanceToMove = 0.1;
#endif
const uint16_t VPList_Boot[] PROGMEM = {
VP_MARLIN_VERSION,
0x0000
};
const uint16_t VPList_Main[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded. */
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage, VP_FAN0_STATUS,
#endif
VP_XPos, VP_YPos, VP_ZPos,
VP_Fan0_Percentage,
VP_Feedrate_Percentage,
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
VP_PrintProgress_Percentage,
#endif
0x0000
};
const uint16_t VPList_Temp[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_Status[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage,
#endif
VP_XPos, VP_YPos, VP_ZPos,
VP_Fan0_Percentage,
VP_Feedrate_Percentage,
VP_PrintProgress_Percentage,
0x0000
};
const uint16_t VPList_Status2[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_Flowrate_E1,
#endif
VP_PrintProgress_Percentage,
VP_PrintTime,
0x0000
};
const uint16_t VPList_Preheat[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_ManualMove[] PROGMEM = {
VP_XPos, VP_YPos, VP_ZPos,
0x0000
};
const uint16_t VPList_ManualExtrude[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
VP_EPos,
0x0000
};
const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
VP_Feedrate_Percentage, VP_Fan0_Percentage,
0x0000
};
const uint16_t VPList_SD_FlowRates[] PROGMEM = {
VP_Flowrate_E0, VP_Flowrate_E1,
0x0000
};
const uint16_t VPList_Filament_heating[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
0x0000
};
const uint16_t VPList_Filament_load_unload[] PROGMEM = {
#if HOTENDS >= 1
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
0x0000
};
const uint16_t VPList_SDFileList[] PROGMEM = {
VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4,
0x0000
};
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
VP_PrintProgress_Percentage, VP_PrintTime,
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage,
#if FAN_COUNT > 1
VP_Fan1_Percentage,
#endif
#endif
VP_Flowrate_E0,
0x0000
};
const uint16_t VPList_SDPrintTune[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set, VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set, VP_Flowrate_E1,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
VP_Feedrate_Percentage,
0x0000
};
const uint16_t VPList_StepPerMM[] PROGMEM = {
VP_X_STEP_PER_MM,
VP_Y_STEP_PER_MM,
VP_Z_STEP_PER_MM,
#if HOTENDS >= 1
VP_E0_STEP_PER_MM,
#endif
#if HOTENDS >= 2
VP_E1_STEP_PER_MM,
#endif
0x0000
};
const uint16_t VPList_PIDE0[] PROGMEM = {
#if ENABLED(PIDTEMP)
VP_E0_PID_P,
VP_E0_PID_I,
VP_E0_PID_D,
#endif
0x0000
};
const uint16_t VPList_PIDBED[] PROGMEM = {
#if ENABLED(PIDTEMP)
VP_BED_PID_P,
VP_BED_PID_I,
VP_BED_PID_D,
#endif
0x0000
};
const uint16_t VPList_Infos[] PROGMEM = {
VP_MARLIN_VERSION,
VP_PrintTime,
#if ENABLED(PRINTCOUNTER)
VP_PrintAccTime,
VP_PrintsTotal,
#endif
0x0000
};
const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
VP_WAITING_STATUS,
0x0000
};
const uint16_t VPList_FLCPreheat[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_FLCPrinting[] PROGMEM = {
#if HOTENDS >= 1
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
};
const struct VPMapping VPMap[] PROGMEM = {
{ DGUSLCD_SCREEN_BOOT, VPList_Boot },
{ DGUSLCD_SCREEN_MAIN, VPList_Main },
{ DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
{ DGUSLCD_SCREEN_STATUS, VPList_Status },
{ DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
{ DGUSLCD_SCREEN_PREHEAT, VPList_Preheat },
{ DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
{ DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
{ DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating },
{ DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload },
{ DGUSLCD_SCREEN_FILAMENT_UNLOADING, VPList_Filament_load_unload },
{ DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation },
{ DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
{ DGUSLCD_SCREEN_SDPRINTTUNE, VPList_SDPrintTune },
{ DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting },
{ DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat },
{ DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting },
{ DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM },
{ DGUSLCD_SCREEN_PID_E, VPList_PIDE0 },
{ DGUSLCD_SCREEN_PID_BED, VPList_PIDBED },
{ DGUSLCD_SCREEN_INFOS, VPList_Infos },
{ 0 , nullptr } // List is terminated with an nullptr as table entry.
};
const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr),
VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr),
VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr),
VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr),
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr),
#if ENABLED(SINGLE_Z_CALIBRATION)
VPHELPER(VP_Z_CALIBRATE, nullptr, &DGUSScreenVariableHandler::HandleZCalibration, nullptr),
#endif
#if ENABLED(FIRST_LAYER_CAL)
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &DGUSScreenVariableHandler::HandleFirstLayerCal, nullptr),
#endif
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay },
// Temperature Data
#if HOTENDS >= 1
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, &planner.flow_percentage[ExtUI::extruder_t::E0], DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, &planner.flow_percentage[ExtUI::extruder_t::E1], DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
VPHELPER(VP_E1_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload),
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMPBED)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#endif
// Fan Data
#if FAN_COUNT
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly<int16_t>, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_YPos, &current_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
#endif
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay),
#if ENABLED(PRINTCOUNTER)
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay),
#endif
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
// SDCard File listing.
#if ENABLED(SDSUPPORT)
VPHELPER(VP_SD_ScrollEvent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist, nullptr),
VPHELPER(VP_SD_FileSelected, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected, nullptr),
VPHELPER(VP_SD_FileSelectConfirm, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint, nullptr),
VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename),
VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename),
VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename),
VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename),
VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename),
VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr),
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr),
#endif
#endif
#endif
#if ENABLED(DGUS_UI_WAITING)
VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay),
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
VPHELPER(0, 0, 0, 0) // must be last entry.
};
#endif // DGUS_LCD_UI_FYSETC

290
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionFYSETC.h Normal file
View File

@ -0,0 +1,290 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 0,
DGUSLCD_SCREEN_MAIN = 1,
DGUSLCD_SCREEN_STATUS = 1,
DGUSLCD_SCREEN_STATUS2 = 1,
DGUSLCD_SCREEN_TEMPERATURE = 10,
DGUSLCD_SCREEN_PREHEAT = 18,
DGUSLCD_SCREEN_POWER_LOSS = 100,
DGUSLCD_SCREEN_MANUALMOVE = 192,
DGUSLCD_SCREEN_UTILITY = 120,
DGUSLCD_SCREEN_FILAMENT_HEATING = 146,
DGUSLCD_SCREEN_FILAMENT_LOADING = 148,
DGUSLCD_SCREEN_FILAMENT_UNLOADING = 158,
DGUSLCD_SCREEN_MANUALEXTRUDE = 160,
DGUSLCD_SCREEN_SDFILELIST = 71,
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 73,
DGUSLCD_SCREEN_SDPRINTTUNE = 75,
DGUSLCD_SCREEN_FLC_PREHEAT = 94,
DGUSLCD_SCREEN_FLC_PRINTING = 96,
DGUSLCD_SCREEN_STEPPERMM = 212,
DGUSLCD_SCREEN_PID_E = 214,
DGUSLCD_SCREEN_PID_BED = 218,
DGUSLCD_SCREEN_INFOS = 30,
DGUSLCD_SCREEN_CONFIRM = 240,
DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
DGUSLCD_SCREEN_WAITING = 251,
DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
DGUSLDC_SCREEN_UNUSED = 255
};
// Display Memory layout used (T5UID)
// Except system variables this is arbitrary, just to organize stuff....
// 0x0000 .. 0x0FFF -- System variables and reserved by the display
// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
// so that we can keep variables nicely together in the address space.
// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
constexpr uint16_t VP_MSGSTR1 = 0x1100;
constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
constexpr uint16_t VP_MSGSTR2 = 0x1140;
constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
constexpr uint16_t VP_MSGSTR3 = 0x1180;
constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
constexpr uint16_t VP_MSGSTR4 = 0x11C0;
constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
// Screenchange request for screens that only make sense when printer is idle.
// e.g movement is only allowed if printer is not printing.
// Marlin must confirm by setting the screen manually.
constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
// Buttons on the SD-Card File listing.
constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
constexpr uint16_t VP_SD_Print_Setting = 0x2040;
constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up
// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
constexpr uint16_t VP_MOVE_X = 0x2100;
constexpr uint16_t VP_MOVE_Y = 0x2102;
constexpr uint16_t VP_MOVE_Z = 0x2104;
constexpr uint16_t VP_MOVE_E0 = 0x2110;
constexpr uint16_t VP_MOVE_E1 = 0x2112;
//constexpr uint16_t VP_MOVE_E2 = 0x2114;
//constexpr uint16_t VP_MOVE_E3 = 0x2116;
//constexpr uint16_t VP_MOVE_E4 = 0x2118;
//constexpr uint16_t VP_MOVE_E5 = 0x211A;
constexpr uint16_t VP_HOME_ALL = 0x2120;
constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130;
// Power loss recovery
constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180;
// Fan Control Buttons , switch between "off" and "on"
constexpr uint16_t VP_FAN0_CONTROL = 0x2200;
constexpr uint16_t VP_FAN1_CONTROL = 0x2202;
//constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
//constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
// Heater Control Buttons , triged between "cool down" and "heat PLA" state
constexpr uint16_t VP_E0_CONTROL = 0x2210;
constexpr uint16_t VP_E1_CONTROL = 0x2212;
//constexpr uint16_t VP_E2_CONTROL = 0x2214;
//constexpr uint16_t VP_E3_CONTROL = 0x2216;
//constexpr uint16_t VP_E4_CONTROL = 0x2218;
//constexpr uint16_t VP_E5_CONTROL = 0x221A;
constexpr uint16_t VP_BED_CONTROL = 0x221C;
// Preheat
constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220;
constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222;
//constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224;
//constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226;
//constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228;
//constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A;
// Filament load and unload
constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300;
constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302;
// Settings store , reset
constexpr uint16_t VP_SETTINGS = 0x2400;
// PID autotune
constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410;
//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412;
//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414;
//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416;
//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418;
//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A;
constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420;
// Calibrate Z
constexpr uint16_t VP_Z_CALIBRATE = 0x2430;
// First layer cal
constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded
// Firmware version on the boot screen.
constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
// Place for status messages.
constexpr uint16_t VP_M117 = 0x3020;
constexpr uint8_t VP_M117_LEN = 0x20;
// Temperatures.
constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer
constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer
constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer
// reserved to support up to 6 Extruders:
constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer
//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer
//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer
//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer
//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer
//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer
//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer
constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer
// reserved for up to 6 Extruders:
//constexpr uint16_t VP_Flowrate_E2 = 0x3094;
//constexpr uint16_t VP_Flowrate_E3 = 0x3096;
//constexpr uint16_t VP_Flowrate_E4 = 0x3098;
//constexpr uint16_t VP_Flowrate_E5 = 0x309A;
constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100)
// Actual Position
constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintTime = 0x3140;
constexpr uint16_t VP_PrintTime_LEN = 32;
constexpr uint16_t VP_PrintAccTime = 0x3160;
constexpr uint16_t VP_PrintAccTime_LEN = 32;
constexpr uint16_t VP_PrintsTotal = 0x3180;
constexpr uint16_t VP_PrintsTotal_LEN = 16;
// SDCard File Listing
constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there.
constexpr uint16_t VP_SD_FileName0 = 0x3200;
constexpr uint16_t VP_SD_FileName1 = 0x3220;
constexpr uint16_t VP_SD_FileName2 = 0x3240;
constexpr uint16_t VP_SD_FileName3 = 0x3260;
constexpr uint16_t VP_SD_FileName4 = 0x3280;
constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; //
constexpr uint16_t VP_SD_Print_Filename = 0x32C0;
// Fan status
constexpr uint16_t VP_FAN0_STATUS = 0x3300;
constexpr uint16_t VP_FAN1_STATUS = 0x3302;
//constexpr uint16_t VP_FAN2_STATUS = 0x3304;
//constexpr uint16_t VP_FAN3_STATUS = 0x3306;
// Heater status
constexpr uint16_t VP_E0_STATUS = 0x3310;
//constexpr uint16_t VP_E1_STATUS = 0x3312;
//constexpr uint16_t VP_E2_STATUS = 0x3314;
//constexpr uint16_t VP_E3_STATUS = 0x3316;
//constexpr uint16_t VP_E4_STATUS = 0x3318;
//constexpr uint16_t VP_E5_STATUS = 0x331A;
constexpr uint16_t VP_BED_STATUS = 0x331C;
constexpr uint16_t VP_MOVE_OPTION = 0x3400;
// Step per mm
constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4
//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602;
constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604;
//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606;
constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608;
//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A;
constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610;
constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612;
//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614;
//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616;
//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618;
//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A;
// PIDs
constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4
constexpr uint16_t VP_E0_PID_I = 0x3702;
constexpr uint16_t VP_E0_PID_D = 0x3704;
constexpr uint16_t VP_BED_PID_P = 0x3710;
constexpr uint16_t VP_BED_PID_I = 0x3712;
constexpr uint16_t VP_BED_PID_D = 0x3714;
// Wating screen status
constexpr uint16_t VP_WAITING_STATUS = 0x3800;
// SPs for certain variables...
// located at 0x5000 and up
// Not used yet!
// This can be used e.g to make controls / data display invisible
constexpr uint16_t SP_T_E0_Is = 0x5000;
constexpr uint16_t SP_T_E0_Set = 0x5010;
constexpr uint16_t SP_T_E1_Is = 0x5020;
constexpr uint16_t SP_T_Bed_Is = 0x5030;
constexpr uint16_t SP_T_Bed_Set = 0x5040;

476
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.cpp Normal file
View File

@ -0,0 +1,476 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/* DGUS VPs changed by George Fu in 2019 for Marlin */
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(DGUS_LCD_UI_HIPRECY)
#include "DGUSDisplayDefinition.h"
#include "DGUSDisplay.h"
#include "../../../../module/temperature.h"
#include "../../../../module/motion.h"
#include "../../../../module/planner.h"
#include "../../ui_api.h"
#include "../../../ultralcd.h"
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
uint16_t distanceToMove = 0.1;
#endif
const uint16_t VPList_Boot[] PROGMEM = {
VP_MARLIN_VERSION,
0x0000
};
const uint16_t VPList_Main[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded. */
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set, VP_E0_STATUS,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set, VP_BED_STATUS,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage, VP_FAN0_STATUS,
#endif
VP_XPos, VP_YPos, VP_ZPos,
VP_Fan0_Percentage,
VP_Feedrate_Percentage,
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
VP_PrintProgress_Percentage,
#endif
0x0000
};
const uint16_t VPList_Temp[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_Status[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage,
#endif
VP_XPos, VP_YPos, VP_ZPos,
VP_Fan0_Percentage,
VP_Feedrate_Percentage,
VP_PrintProgress_Percentage,
0x0000
};
const uint16_t VPList_Status2[] PROGMEM = {
/* VP_M117, for completeness, but it cannot be auto-uploaded */
#if HOTENDS >= 1
VP_Flowrate_E0,
#endif
#if HOTENDS >= 2
VP_Flowrate_E1,
#endif
VP_PrintProgress_Percentage,
VP_PrintTime,
0x0000
};
const uint16_t VPList_Preheat[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_ManualMove[] PROGMEM = {
VP_XPos, VP_YPos, VP_ZPos,
0x0000
};
const uint16_t VPList_ManualExtrude[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
VP_EPos,
0x0000
};
const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
VP_Feedrate_Percentage, VP_Fan0_Percentage,
0x0000
};
const uint16_t VPList_SD_FlowRates[] PROGMEM = {
VP_Flowrate_E0, VP_Flowrate_E1,
0x0000
};
const uint16_t VPList_Filament_heating[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
0x0000
};
const uint16_t VPList_Filament_load_unload[] PROGMEM = {
#if HOTENDS >= 1
VP_E0_FILAMENT_LOAD_UNLOAD,
#endif
#if HOTENDS >= 2
VP_E1_FILAMENT_LOAD_UNLOAD,
#endif
0x0000
};
const uint16_t VPList_SDFileList[] PROGMEM = {
VP_SD_FileName0, VP_SD_FileName1, VP_SD_FileName2, VP_SD_FileName3, VP_SD_FileName4,
0x0000
};
const uint16_t VPList_SD_PrintManipulation[] PROGMEM = {
VP_PrintProgress_Percentage, VP_PrintTime,
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
#if FAN_COUNT > 0
VP_Fan0_Percentage,
#if FAN_COUNT > 1
VP_Fan1_Percentage,
#endif
#endif
VP_Flowrate_E0,
0x0000
};
const uint16_t VPList_SDPrintTune[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
VP_Feedrate_Percentage,
#if FAN_COUNT > 0
VP_Fan0_Percentage,
#endif
VP_Flowrate_E0,
VP_SD_Print_ProbeOffsetZ,
0x0000
};
const uint16_t VPList_StepPerMM[] PROGMEM = {
VP_X_STEP_PER_MM,
VP_Y_STEP_PER_MM,
VP_Z_STEP_PER_MM,
#if HOTENDS >= 1
VP_E0_STEP_PER_MM,
#endif
#if HOTENDS >= 2
VP_E1_STEP_PER_MM,
#endif
0x0000
};
const uint16_t VPList_PIDE0[] PROGMEM = {
#if ENABLED(PIDTEMP)
VP_E0_PID_P,
VP_E0_PID_I,
VP_E0_PID_D,
#endif
0x0000
};
const uint16_t VPList_PIDBED[] PROGMEM = {
#if ENABLED(PIDTEMP)
VP_BED_PID_P,
VP_BED_PID_I,
VP_BED_PID_D,
#endif
0x0000
};
const uint16_t VPList_Infos[] PROGMEM = {
VP_MARLIN_VERSION,
VP_PrintTime,
#if ENABLED(PRINTCOUNTER)
VP_PrintAccTime,
VP_PrintsTotal,
#endif
0x0000
};
const uint16_t VPList_PIDTuningWaiting[] PROGMEM = {
VP_WAITING_STATUS,
0x0000
};
const uint16_t VPList_FLCPreheat[] PROGMEM = {
#if HOTENDS >= 1
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
0x0000
};
const uint16_t VPList_FLCPrinting[] PROGMEM = {
#if HOTENDS >= 1
VP_SD_Print_ProbeOffsetZ,
#endif
0x0000
};
const struct VPMapping VPMap[] PROGMEM = {
{ DGUSLCD_SCREEN_BOOT, VPList_Boot },
{ DGUSLCD_SCREEN_MAIN, VPList_Main },
{ DGUSLCD_SCREEN_TEMPERATURE, VPList_Temp },
{ DGUSLCD_SCREEN_STATUS, VPList_Status },
{ DGUSLCD_SCREEN_STATUS2, VPList_Status2 },
{ DGUSLCD_SCREEN_PREHEAT, VPList_Preheat },
{ DGUSLCD_SCREEN_MANUALMOVE, VPList_ManualMove },
{ DGUSLCD_SCREEN_MANUALEXTRUDE, VPList_ManualExtrude },
{ DGUSLCD_SCREEN_FILAMENT_HEATING, VPList_Filament_heating },
{ DGUSLCD_SCREEN_FILAMENT_LOADING, VPList_Filament_load_unload },
{ DGUSLCD_SCREEN_FILAMENT_UNLOADING, VPList_Filament_load_unload },
{ DGUSLCD_SCREEN_SDPRINTMANIPULATION, VPList_SD_PrintManipulation },
{ DGUSLCD_SCREEN_SDFILELIST, VPList_SDFileList },
{ DGUSLCD_SCREEN_SDPRINTTUNE, VPList_SDPrintTune },
{ DGUSLCD_SCREEN_WAITING, VPList_PIDTuningWaiting },
{ DGUSLCD_SCREEN_FLC_PREHEAT, VPList_FLCPreheat },
{ DGUSLCD_SCREEN_FLC_PRINTING, VPList_FLCPrinting },
{ DGUSLCD_SCREEN_STEPPERMM, VPList_StepPerMM },
{ DGUSLCD_SCREEN_PID_E, VPList_PIDE0 },
{ DGUSLCD_SCREEN_PID_BED, VPList_PIDBED },
{ DGUSLCD_SCREEN_INFOS, VPList_Infos },
{ 0 , nullptr } // List is terminated with an nullptr as table entry.
};
const char MarlinVersion[] PROGMEM = SHORT_BUILD_VERSION;
// Helper to define a DGUS_VP_Variable for common use cases.
#define VPHELPER(VPADR, VPADRVAR, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=sizeof(VPADRVAR), \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
// Helper to define a DGUS_VP_Variable when the sizeo of the var cannot be determined automaticalyl (eg. a string)
#define VPHELPER_STR(VPADR, VPADRVAR, STRLEN, RXFPTR, TXFPTR ) { .VP=VPADR, .memadr=VPADRVAR, .size=STRLEN, \
.set_by_display_handler = RXFPTR, .send_to_display_handler = TXFPTR }
const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr),
VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr),
VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr),
VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr),
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr),
#if ENABLED(SINGLE_Z_CALIBRATION)
VPHELPER(VP_Z_CALIBRATE, nullptr, &DGUSScreenVariableHandler::HandleZCalibration, nullptr),
#endif
#if ENABLED(FIRST_LAYER_CAL)
VPHELPER(VP_Z_FIRST_LAYER_CAL, nullptr, &DGUSScreenVariableHandler::HandleFirstLayerCal, nullptr),
#endif
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
{ .VP = VP_M117, .memadr = nullptr, .size = VP_M117_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplay },
// Temperature Data
#if HOTENDS >= 1
VPHELPER(VP_T_E0_Is, &thermalManager.temp_hotend[0].celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E0_Set, &thermalManager.temp_hotend[0].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E0, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_BED, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#endif
// Fan Data
#if FAN_COUNT
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly<int16_t>, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_YPos, &current_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
#endif
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ),
#if ENABLED(PRINTCOUNTER)
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay ),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay ),
#endif
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
// SDCard File listing.
#if ENABLED(SDSUPPORT)
VPHELPER(VP_SD_ScrollEvent, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ScrollFilelist, nullptr),
VPHELPER(VP_SD_FileSelected, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_FileSelected, nullptr),
VPHELPER(VP_SD_FileSelectConfirm, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_StartPrint, nullptr),
VPHELPER_STR(VP_SD_FileName0, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER_STR(VP_SD_FileName1, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER_STR(VP_SD_FileName2, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER_STR(VP_SD_FileName3, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr),
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr),
#endif
#endif
#endif
#if ENABLED(DGUS_UI_WAITING)
VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay),
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
{ .VP = VP_MSGSTR1, .memadr = nullptr, .size = VP_MSGSTR1_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR2, .memadr = nullptr, .size = VP_MSGSTR2_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR3, .memadr = nullptr, .size = VP_MSGSTR3_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
{ .VP = VP_MSGSTR4, .memadr = nullptr, .size = VP_MSGSTR4_LEN, .set_by_display_handler = nullptr, .send_to_display_handler = &DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
VPHELPER(0, 0, 0, 0) // must be last entry.
};
#endif // DGUS_LCD_UI_HIPRECY

289
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionHIPRECY.h Normal file
View File

@ -0,0 +1,289 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 160,
DGUSLCD_SCREEN_MAIN = 1,
DGUSLCD_SCREEN_STATUS = 1,
DGUSLCD_SCREEN_STATUS2 = 1,
DGUSLCD_SCREEN_POWER_LOSS = 17,
DGUSLCD_SCREEN_TEMPERATURE = 40,
DGUSLCD_SCREEN_MANUALMOVE = 86,
DGUSLCD_SCREEN_PREHEAT = 48,
DGUSLCD_SCREEN_UTILITY = 70,
DGUSLCD_SCREEN_FILAMENT_HEATING = 80,
DGUSLCD_SCREEN_FILAMENT_LOADING = 76,
DGUSLCD_SCREEN_FILAMENT_UNLOADING = 82,
DGUSLCD_SCREEN_MANUALEXTRUDE = 84,
DGUSLCD_SCREEN_SDFILELIST = 3,
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 7,
DGUSLCD_SCREEN_SDPRINTTUNE = 9,
DGUSLCD_SCREEN_FLC_PREHEAT = 94,
DGUSLCD_SCREEN_FLC_PRINTING = 96,
DGUSLCD_SCREEN_STEPPERMM = 122,
DGUSLCD_SCREEN_PID_E = 126,
DGUSLCD_SCREEN_PID_BED = 128,
DGUSLCD_SCREEN_INFOS = 131,
DGUSLCD_SCREEN_CONFIRM = 240,
DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
DGUSLCD_SCREEN_WAITING = 251,
DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
DGUSLDC_SCREEN_UNUSED = 255
};
// Display Memory layout used (T5UID)
// Except system variables this is arbitrary, just to organize stuff....
// 0x0000 .. 0x0FFF -- System variables and reserved by the display
// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
// so that we can keep variables nicely together in the address space.
// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
constexpr uint16_t VP_MSGSTR1 = 0x1100;
constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
constexpr uint16_t VP_MSGSTR2 = 0x1140;
constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
constexpr uint16_t VP_MSGSTR3 = 0x1180;
constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
constexpr uint16_t VP_MSGSTR4 = 0x11C0;
constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
// Screenchange request for screens that only make sense when printer is idle.
// e.g movement is only allowed if printer is not printing.
// Marlin must confirm by setting the screen manually.
constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
// Buttons on the SD-Card File listing.
constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
constexpr uint16_t VP_SD_Print_Setting = 0x2040;
constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up
// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
constexpr uint16_t VP_MOVE_X = 0x2100;
constexpr uint16_t VP_MOVE_Y = 0x2102;
constexpr uint16_t VP_MOVE_Z = 0x2104;
constexpr uint16_t VP_MOVE_E0 = 0x2110;
constexpr uint16_t VP_MOVE_E1 = 0x2112;
//constexpr uint16_t VP_MOVE_E2 = 0x2114;
//constexpr uint16_t VP_MOVE_E3 = 0x2116;
//constexpr uint16_t VP_MOVE_E4 = 0x2118;
//constexpr uint16_t VP_MOVE_E5 = 0x211A;
constexpr uint16_t VP_HOME_ALL = 0x2120;
constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130;
// Power loss recovery
constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180;
// Fan Control Buttons , switch between "off" and "on"
constexpr uint16_t VP_FAN0_CONTROL = 0x2200;
constexpr uint16_t VP_FAN1_CONTROL = 0x2202;
//constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
//constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
// Heater Control Buttons , triged between "cool down" and "heat PLA" state
constexpr uint16_t VP_E0_CONTROL = 0x2210;
constexpr uint16_t VP_E1_CONTROL = 0x2212;
//constexpr uint16_t VP_E2_CONTROL = 0x2214;
//constexpr uint16_t VP_E3_CONTROL = 0x2216;
//constexpr uint16_t VP_E4_CONTROL = 0x2218;
//constexpr uint16_t VP_E5_CONTROL = 0x221A;
constexpr uint16_t VP_BED_CONTROL = 0x221C;
// Preheat
constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220;
//constexpr uint16_t VP_E1_BED_PREHEAT = 0x2222;
//constexpr uint16_t VP_E2_BED_PREHEAT = 0x2224;
//constexpr uint16_t VP_E3_BED_PREHEAT = 0x2226;
//constexpr uint16_t VP_E4_BED_PREHEAT = 0x2228;
//constexpr uint16_t VP_E5_BED_PREHEAT = 0x222A;
// Filament load and unload
constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300;
// Settings store , reset
constexpr uint16_t VP_SETTINGS = 0x2400;
// PID autotune
constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410;
//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412;
//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414;
//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416;
//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418;
//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A;
constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420;
// Calibrate Z
constexpr uint16_t VP_Z_CALIBRATE = 0x2430;
// First layer cal
constexpr uint16_t VP_Z_FIRST_LAYER_CAL = 0x2500; // Data: 0 - Cancel first layer cal progress, >0 filament type have loaded
// Firmware version on the boot screen.
constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
// Place for status messages.
constexpr uint16_t VP_M117 = 0x3020;
constexpr uint8_t VP_M117_LEN = 0x20;
// Temperatures.
constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer
constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer
constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer
// reserved to support up to 6 Extruders:
//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer
//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer
//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer
//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer
//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer
//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer
//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer
constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer
// reserved for up to 6 Extruders:
//constexpr uint16_t VP_Flowrate_E2 = 0x3094;
//constexpr uint16_t VP_Flowrate_E3 = 0x3096;
//constexpr uint16_t VP_Flowrate_E4 = 0x3098;
//constexpr uint16_t VP_Flowrate_E5 = 0x309A;
constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan1_Percentage = 0x3102; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan2_Percentage = 0x3104; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Fan3_Percentage = 0x3106; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Feedrate_Percentage = 0x3108; // 2 Byte Integer (0..100)
// Actual Position
constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_PrintProgress_Percentage = 0x3130; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintTime = 0x3140;
constexpr uint16_t VP_PrintTime_LEN = 32;
constexpr uint16_t VP_PrintAccTime = 0x3160;
constexpr uint16_t VP_PrintAccTime_LEN = 32;
constexpr uint16_t VP_PrintsTotal = 0x3180;
constexpr uint16_t VP_PrintsTotal_LEN = 16;
// SDCard File Listing
constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there.
constexpr uint16_t VP_SD_FileName0 = 0x3200;
constexpr uint16_t VP_SD_FileName1 = 0x3220;
constexpr uint16_t VP_SD_FileName2 = 0x3240;
constexpr uint16_t VP_SD_FileName3 = 0x3260;
constexpr uint16_t VP_SD_FileName4 = 0x3280;
constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; //
constexpr uint16_t VP_SD_Print_Filename = 0x32C0; //
// Fan status
constexpr uint16_t VP_FAN0_STATUS = 0x3300;
constexpr uint16_t VP_FAN1_STATUS = 0x3302;
//constexpr uint16_t VP_FAN2_STATUS = 0x3304;
//constexpr uint16_t VP_FAN3_STATUS = 0x3306;
// Heater status
constexpr uint16_t VP_E0_STATUS = 0x3310;
//constexpr uint16_t VP_E1_STATUS = 0x3312;
//constexpr uint16_t VP_E2_STATUS = 0x3314;
//constexpr uint16_t VP_E3_STATUS = 0x3316;
//constexpr uint16_t VP_E4_STATUS = 0x3318;
//constexpr uint16_t VP_E5_STATUS = 0x331A;
constexpr uint16_t VP_BED_STATUS = 0x331C;
constexpr uint16_t VP_MOVE_OPTION = 0x3400;
// Step per mm
constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4
//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602;
constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604;
//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606;
constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608;
//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A;
constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610;
//constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612;
//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614;
//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616;
//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618;
//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A;
// PIDs
constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4
constexpr uint16_t VP_E0_PID_I = 0x3702;
constexpr uint16_t VP_E0_PID_D = 0x3704;
constexpr uint16_t VP_BED_PID_P = 0x3710;
constexpr uint16_t VP_BED_PID_I = 0x3712;
constexpr uint16_t VP_BED_PID_D = 0x3714;
// Wating screen status
constexpr uint16_t VP_WAITING_STATUS = 0x3800;
// SPs for certain variables...
// located at 0x5000 and up
// Not used yet!
// This can be used e.g to make controls / data display invisible
constexpr uint16_t SP_T_E0_Is = 0x5000;
constexpr uint16_t SP_T_E0_Set = 0x5010;
constexpr uint16_t SP_T_E1_Is = 0x5020;
constexpr uint16_t SP_T_Bed_Is = 0x5030;
constexpr uint16_t SP_T_Bed_Set = 0x5040;

125
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinition.cpp → Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.cpp
View File

@ -24,16 +24,21 @@
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(DGUS_LCD)
#if ENABLED(DGUS_LCD_UI_ORIGIN)
#include "DGUSDisplayDefinition.h"
#include "DGUSDisplay.h"
#include "../../../../module/temperature.h"
#include "../../../../module/motion.h"
#include "../../../../module/planner.h"
#include "../../../ultralcd.h"
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
uint16_t distanceToMove = 0.1;
#endif
const uint16_t VPList_Boot[] PROGMEM = {
VP_MARLIN_VERSION,
0x0000
@ -49,7 +54,7 @@ const uint16_t VPList_Temp[] PROGMEM = {
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_I, VP_T_E1_S,
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
@ -63,16 +68,16 @@ const uint16_t VPList_Status[] PROGMEM = {
VP_T_E0_Is, VP_T_E0_Set,
#endif
#if HOTENDS >= 2
VP_T_E1_I, VP_T_E1_S,
VP_T_E1_Is, VP_T_E1_Set,
#endif
#if HAS_HEATED_BED
VP_T_Bed_Is, VP_T_Bed_Set,
#endif
#if FAN_COUNT > 0
VP_Fan_Percentage,
VP_Fan0_Percentage,
#endif
VP_XPos, VP_YPos, VP_ZPos,
VP_Fan_Percentage,
VP_Fan0_Percentage,
VP_Feedrate_Percentage,
VP_PrintProgress_Percentage,
0x0000
@ -102,7 +107,7 @@ const uint16_t VPList_ManualExtrude[] PROGMEM = {
};
const uint16_t VPList_FanAndFeedrate[] PROGMEM = {
VP_Feedrate_Percentage, VP_Fan_Percentage,
VP_Feedrate_Percentage, VP_Fan0_Percentage,
0x0000
};
@ -150,15 +155,33 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
// Helper to detect touch events
VPHELPER(VP_SCREENCHANGE, nullptr, DGUSScreenVariableHandler::ScreenChangeHook, nullptr),
VPHELPER(VP_SCREENCHANGE_ASK, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfIdle, nullptr),
VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr),
#if ENABLED(SDSUPPORT)
VPHELPER(VP_SCREENCHANGE_WHENSD, nullptr, DGUSScreenVariableHandler::ScreenChangeHookIfSD, nullptr),
#endif
VPHELPER(VP_CONFIRMED, nullptr, DGUSScreenVariableHandler::ScreenConfirmedOK, nullptr),
VPHELPER(VP_TEMP_ALL_OFF, nullptr, &DGUSScreenVariableHandler::HandleAllHeatersOff, nullptr),
VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_OPTION, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMoveOption, nullptr),
#endif
#if ENABLED(DUGS_UI_MOVE_DIS_OPTION)
VPHELPER(VP_MOVE_X, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, &distanceToMove, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#else
VPHELPER(VP_MOVE_X, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Y, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_MOVE_Z, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
VPHELPER(VP_HOME_ALL, nullptr, &DGUSScreenVariableHandler::HandleManualMove, nullptr),
#endif
VPHELPER(VP_MOTOR_LOCK_UNLOK, nullptr, &DGUSScreenVariableHandler::HandleMotorLockUnlock, nullptr),
#if ENABLED(POWER_LOSS_RECOVERY)
VPHELPER(VP_POWER_LOSS_RECOVERY, nullptr, &DGUSScreenVariableHandler::HandlePowerLossRecovery, nullptr),
#endif
VPHELPER(VP_SETTINGS, nullptr, &DGUSScreenVariableHandler::HandleSettings, nullptr),
{ .VP = VP_MARLIN_VERSION, .memadr = (void*)MarlinVersion, .size = VP_MARLIN_VERSION_LEN, .set_by_display_handler = nullptr, .send_to_display_handler =&DGUSScreenVariableHandler::DGUSLCD_SendStringToDisplayPGM },
// M117 LCD String (We don't need the string in memory but "just" push it to the display on demand, hence the nullptr
@ -171,39 +194,82 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(VP_Flowrate_E0, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_EPos, &destination.e, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_MOVE_E0, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
VPHELPER(VP_E0_CONTROL, &thermalManager.temp_hotend[0].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E0_STATUS, &thermalManager.temp_hotend[0].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(DGUS_PREHEAT_UI)
VPHELPER(VP_E0_BED_PREHEAT, nullptr, &DGUSScreenVariableHandler::HandlePreheat, nullptr),
#endif
#if ENABLED(PIDTEMP)
VPHELPER(VP_E0_PID_P, &thermalManager.temp_hotend[0].pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_I, &thermalManager.temp_hotend[0].pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_E0_PID_D, &thermalManager.temp_hotend[0].pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_PID_AUTOTUNE_E0, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
VPHELPER(VP_E0_FILAMENT_LOAD_UNLOAD, nullptr, &DGUSScreenVariableHandler::HandleFilamentOption, &DGUSScreenVariableHandler::HandleFilamentLoadUnload),
#endif
#endif
#if HOTENDS >= 2
VPHELPER(VP_T_E1_I, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E1_S, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_T_E1_Is, &thermalManager.temp_hotend[1].celsius, nullptr, DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_E1_Set, &thermalManager.temp_hotend[1].target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_Flowrate_E1, nullptr, DGUSScreenVariableHandler::HandleFlowRateChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_MOVE_E1, nullptr, &DGUSScreenVariableHandler::HandleManualExtrude, nullptr),
#endif
#if HOTENDS >= 3
#error More than 2 Hotends currently not implemented on the Display UI design.
VPHELPER(VP_E1_CONTROL, &thermalManager.temp_hotend[1].target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_E1_STATUS, &thermalManager.temp_hotend[1].target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMP)
VPHELPER(VP_PID_AUTOTUNE_E1, nullptr, &DGUSScreenVariableHandler::HandlePIDAutotune, nullptr),
#endif
#endif
#if HAS_HEATED_BED
VPHELPER(VP_T_Bed_Is, &thermalManager.temp_bed.celsius, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<0>),
VPHELPER(VP_T_Bed_Set, &thermalManager.temp_bed.target, DGUSScreenVariableHandler::HandleTemperatureChanged, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay),
VPHELPER(VP_BED_CONTROL, &thermalManager.temp_bed.target, &DGUSScreenVariableHandler::HandleHeaterControl, nullptr),
VPHELPER(VP_BED_STATUS, &thermalManager.temp_bed.target, nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendHeaterStatusToDisplay),
#if ENABLED(PIDTEMPBED)
VPHELPER(VP_BED_PID_P, &thermalManager.temp_bed.pid.Kp, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_I, &thermalManager.temp_bed.pid.Ki, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
VPHELPER(VP_BED_PID_D, &thermalManager.temp_bed.pid.Kd, DGUSScreenVariableHandler::HandleTemperaturePIDChanged, DGUSScreenVariableHandler::DGUSLCD_SendTemperaturePID),
#endif
#endif
// Fan Data.
#if FAN_COUNT > 0
VPHELPER(VP_Fan_Percentage, &thermalManager.fan_speed[0], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay),
// Fan Data
#if FAN_COUNT
#define FAN_VPHELPER(N) \
VPHELPER(VP_Fan##N##_Percentage, &thermalManager.fan_speed[N], DGUSScreenVariableHandler::DGUSLCD_PercentageToUint8, &DGUSScreenVariableHandler::DGUSLCD_SendPercentageToDisplay), \
VPHELPER(VP_FAN##N##_CONTROL, &thermalManager.fan_speed[N], &DGUSScreenVariableHandler::HandleFanControl, nullptr), \
VPHELPER(VP_FAN##N##_STATUS, &thermalManager.fan_speed[N], nullptr, &DGUSScreenVariableHandler::DGUSLCD_SendFanStatusToDisplay),
REPEAT(FAN_COUNT, FAN_VPHELPER)
#endif
// Feedrate.
// Feedrate
VPHELPER(VP_Feedrate_Percentage, &feedrate_percentage, DGUSScreenVariableHandler::DGUSLCD_SetValueDirectly<int16_t>, &DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
// Position Data.
// Position Data
VPHELPER(VP_XPos, &current_position.x, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_YPos, &current_position.y, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
VPHELPER(VP_ZPos, &current_position.z, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsLongValueToDisplay<2>),
// Print Progress.
VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
// Print Progress
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
VPHELPER(VP_PrintProgress_Percentage, &ui.progress_override, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWordValueToDisplay ),
#endif
// Print Time
VPHELPER_STR(VP_PrintTime, nullptr, VP_PrintTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintTimeToDisplay ),
#if ENABLED(PRINTCOUNTER)
VPHELPER_STR(VP_PrintAccTime, nullptr, VP_PrintAccTime_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintAccTimeToDisplay ),
VPHELPER_STR(VP_PrintsTotal, nullptr, VP_PrintsTotal_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendPrintsTotalToDisplay ),
#endif
VPHELPER(VP_X_STEP_PER_MM, &planner.settings.axis_steps_per_mm[X_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Y_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Y_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
VPHELPER(VP_Z_STEP_PER_MM, &planner.settings.axis_steps_per_mm[Z_AXIS], DGUSScreenVariableHandler::HandleStepPerMMChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#if HOTENDS >= 1
VPHELPER(VP_E0_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(0)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
#if HOTENDS >= 2
VPHELPER(VP_E1_STEP_PER_MM, &planner.settings.axis_steps_per_mm[E_AXIS_N(1)], DGUSScreenVariableHandler::HandleStepPerMMExtruderChanged, DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<1>),
#endif
// SDCard File listing.
#if ENABLED(SDSUPPORT)
@ -217,6 +283,17 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER_STR(VP_SD_FileName4, nullptr, VP_SD_FileName_LEN, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_SendFilename ),
VPHELPER(VP_SD_ResumePauseAbort, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ResumePauseAbort, nullptr),
VPHELPER(VP_SD_AbortPrintConfirmed, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_ReallyAbort, nullptr),
VPHELPER(VP_SD_Print_Setting, nullptr, DGUSScreenVariableHandler::DGUSLCD_SD_PrintTune, nullptr),
#if HAS_BED_PROBE
VPHELPER(VP_SD_Print_ProbeOffsetZ, &probe_offset.z, DGUSScreenVariableHandler::HandleProbeOffsetZChanged, &DGUSScreenVariableHandler::DGUSLCD_SendFloatAsIntValueToDisplay<2>),
#if ENABLED(BABYSTEPPING)
VPHELPER(VP_SD_Print_LiveAdjustZ, nullptr, DGUSScreenVariableHandler::HandleLiveAdjustZ, nullptr),
#endif
#endif
#endif
#if ENABLED(DGUS_UI_WAITING)
VPHELPER(VP_WAITING_STATUS, nullptr, nullptr, DGUSScreenVariableHandler::DGUSLCD_SendWaitingStatusToDisplay),
#endif
// Messages for the User, shared by the popup and the kill screen. They cant be autouploaded as we do not buffer content.
@ -228,4 +305,4 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
VPHELPER(0, 0, 0, 0) // must be last entry.
};
#endif // DGUS_LCD
#endif // DGUS_LCD_UI_ORIGIN

280
Marlin/src/lcd/extensible_ui/lib/dgus/DGUSDisplayDefinitionOrigin.h Normal file
View File

@ -0,0 +1,280 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
enum DGUSLCD_Screens : uint8_t {
DGUSLCD_SCREEN_BOOT = 0,
DGUSLCD_SCREEN_MAIN = 10,
DGUSLCD_SCREEN_TEMPERATURE = 20,
DGUSLCD_SCREEN_STATUS = 30,
DGUSLCD_SCREEN_STATUS2 = 32,
DGUSLCD_SCREEN_MANUALMOVE = 40,
DGUSLCD_SCREEN_MANUALEXTRUDE=42,
DGUSLCD_SCREEN_FANANDFEEDRATE = 44,
DGUSLCD_SCREEN_FLOWRATES = 46,
DGUSLCD_SCREEN_SDFILELIST = 50,
DGUSLCD_SCREEN_SDPRINTMANIPULATION = 52,
DGUSLCD_SCREEN_POWER_LOSS = 100,
DGUSLCD_SCREEN_PREHEAT=120,
DGUSLCD_SCREEN_UTILITY=110,
DGUSLCD_SCREEN_FILAMENT_HEATING=146,
DGUSLCD_SCREEN_FILAMENT_LOADING=148,
DGUSLCD_SCREEN_FILAMENT_UNLOADING=158,
DGUSLCD_SCREEN_SDPRINTTUNE = 170,
DGUSLCD_SCREEN_CONFIRM = 240,
DGUSLCD_SCREEN_KILL = 250, ///< Kill Screen. Must always be 250 (to be able to display "Error wrong LCD Version")
DGUSLCD_SCREEN_WAITING = 251,
DGUSLCD_SCREEN_POPUP = 252, ///< special target, popup screen will also return this code to say "return to previous screen"
DGUSLDC_SCREEN_UNUSED = 255
};
// Display Memory layout used (T5UID)
// Except system variables this is arbitrary, just to organize stuff....
// 0x0000 .. 0x0FFF -- System variables and reserved by the display
// 0x1000 .. 0x1FFF -- Variables to never change location, regardless of UI Version
// 0x2000 .. 0x2FFF -- Controls (VPs that will trigger some action)
// 0x3000 .. 0x4FFF -- Marlin Data to be displayed
// 0x5000 .. -- SPs (if we want to modify display elements, e.g change color or like) -- currently unused
// As there is plenty of space (at least most displays have >8k RAM), we do not pack them too tight,
// so that we can keep variables nicely together in the address space.
// UI Version always on 0x1000...0x1002 so that the firmware can check this and bail out.
constexpr uint16_t VP_UI_VERSION_MAJOR = 0x1000; // Major -- incremented when incompatible
constexpr uint16_t VP_UI_VERSION_MINOR = 0x1001; // Minor -- incremented on new features, but compatible
constexpr uint16_t VP_UI_VERSION_PATCH = 0x1002; // Patch -- fixed which do not change functionality.
constexpr uint16_t VP_UI_FLAVOUR = 0x1010; // lets reserve 16 bytes here to determine if UI is suitable for this Marlin. tbd.
// Storage space for the Killscreen messages. 0x1100 - 0x1200 . Reused for the popup.
constexpr uint16_t VP_MSGSTR1 = 0x1100;
constexpr uint8_t VP_MSGSTR1_LEN = 0x20; // might be more place for it...
constexpr uint16_t VP_MSGSTR2 = 0x1140;
constexpr uint8_t VP_MSGSTR2_LEN = 0x20;
constexpr uint16_t VP_MSGSTR3 = 0x1180;
constexpr uint8_t VP_MSGSTR3_LEN = 0x20;
constexpr uint16_t VP_MSGSTR4 = 0x11C0;
constexpr uint8_t VP_MSGSTR4_LEN = 0x20;
// Screenchange request for screens that only make sense when printer is idle.
// e.g movement is only allowed if printer is not printing.
// Marlin must confirm by setting the screen manually.
constexpr uint16_t VP_SCREENCHANGE_ASK = 0x2000;
constexpr uint16_t VP_SCREENCHANGE = 0x2001; // Key-Return button to new menu pressed. Data contains target screen in low byte and info in high byte.
constexpr uint16_t VP_TEMP_ALL_OFF = 0x2002; // Turn all heaters off. Value arbitrary ;)=
constexpr uint16_t VP_SCREENCHANGE_WHENSD = 0x2003; // "Print" Button touched -- go only there if there is an SD Card.
constexpr uint16_t VP_CONFIRMED = 0x2010; // OK on confirm screen.
// Buttons on the SD-Card File listing.
constexpr uint16_t VP_SD_ScrollEvent = 0x2020; // Data: 0 for "up a directory", numbers are the amount to scroll, e.g -1 one up, 1 one down
constexpr uint16_t VP_SD_FileSelected = 0x2022; // Number of file field selected.
constexpr uint16_t VP_SD_FileSelectConfirm = 0x2024; // (This is a virtual VP and emulated by the Confirm Screen when a file has been confirmed)
constexpr uint16_t VP_SD_ResumePauseAbort = 0x2026; // Resume(Data=0), Pause(Data=1), Abort(Data=2) SD Card prints
constexpr uint16_t VP_SD_AbortPrintConfirmed = 0x2028; // Abort print confirmation (virtual, will be injected by the confirm dialog)
constexpr uint16_t VP_SD_Print_Setting = 0x2040;
constexpr uint16_t VP_SD_Print_LiveAdjustZ = 0x2050; // Data: 0 down, 1 up
// Controls for movement (we can't use the incremental / decremental feature of the display at this feature works only with 16 bit values
// (which would limit us to 655.35mm, which is likely not a problem for common setups, but i don't want to rule out hangprinters support)
// A word about the coding: The VP will be per axis and the return code will be an signed 16 bit value in 0.01 mm resolution, telling us
// the relative travel amount t he user wants to do. So eg. if the display sends us VP=2100 with value 100, the user wants us to move X by +1 mm.
constexpr uint16_t VP_MOVE_X = 0x2100;
constexpr uint16_t VP_MOVE_Y = 0x2102;
constexpr uint16_t VP_MOVE_Z = 0x2104;
constexpr uint16_t VP_MOVE_E0 = 0x2110;
constexpr uint16_t VP_MOVE_E1 = 0x2112;
//constexpr uint16_t VP_MOVE_E2 = 0x2114;
//constexpr uint16_t VP_MOVE_E3 = 0x2116;
//constexpr uint16_t VP_MOVE_E4 = 0x2118;
//constexpr uint16_t VP_MOVE_E5 = 0x211A;
constexpr uint16_t VP_HOME_ALL = 0x2120;
constexpr uint16_t VP_MOTOR_LOCK_UNLOK = 0x2130;
// Power loss recovery
constexpr uint16_t VP_POWER_LOSS_RECOVERY = 0x2180;
// Fan Control Buttons , switch between "off" and "on"
constexpr uint16_t VP_FAN0_CONTROL = 0x2200;
constexpr uint16_t VP_FAN1_CONTROL = 0x2202;
//constexpr uint16_t VP_FAN2_CONTROL = 0x2204;
//constexpr uint16_t VP_FAN3_CONTROL = 0x2206;
// Heater Control Buttons , triged between "cool down" and "heat PLA" state
constexpr uint16_t VP_E0_CONTROL = 0x2210;
constexpr uint16_t VP_E1_CONTROL = 0x2212;
//constexpr uint16_t VP_E2_CONTROL = 0x2214;
//constexpr uint16_t VP_E3_CONTROL = 0x2216;
//constexpr uint16_t VP_E4_CONTROL = 0x2218;
//constexpr uint16_t VP_E5_CONTROL = 0x221A;
constexpr uint16_t VP_BED_CONTROL = 0x221C;
// Preheat
constexpr uint16_t VP_E0_BED_PREHEAT = 0x2220;
constexpr uint16_t VP_E1_BED_CONTROL = 0x2222;
//constexpr uint16_t VP_E2_BED_CONTROL = 0x2224;
//constexpr uint16_t VP_E3_BED_CONTROL = 0x2226;
//constexpr uint16_t VP_E4_BED_CONTROL = 0x2228;
//constexpr uint16_t VP_E5_BED_CONTROL = 0x222A;
// Filament load and unload
constexpr uint16_t VP_E0_FILAMENT_LOAD_UNLOAD = 0x2300;
constexpr uint16_t VP_E1_FILAMENT_LOAD_UNLOAD = 0x2302;
// Settings store , reset
constexpr uint16_t VP_SETTINGS = 0x2400;
// PID autotune
constexpr uint16_t VP_PID_AUTOTUNE_E0 = 0x2410;
//constexpr uint16_t VP_PID_AUTOTUNE_E1 = 0x2412;
//constexpr uint16_t VP_PID_AUTOTUNE_E2 = 0x2414;
//constexpr uint16_t VP_PID_AUTOTUNE_E3 = 0x2416;
//constexpr uint16_t VP_PID_AUTOTUNE_E4 = 0x2418;
//constexpr uint16_t VP_PID_AUTOTUNE_E5 = 0x241A;
constexpr uint16_t VP_PID_AUTOTUNE_BED = 0x2420;
// Firmware version on the boot screen.
constexpr uint16_t VP_MARLIN_VERSION = 0x3000;
constexpr uint8_t VP_MARLIN_VERSION_LEN = 16; // there is more space on the display, if needed.
// Place for status messages.
constexpr uint16_t VP_M117 = 0x3020;
constexpr uint8_t VP_M117_LEN = 0x20;
// Temperatures.
constexpr uint16_t VP_T_E0_Is = 0x3060; // 4 Byte Integer
constexpr uint16_t VP_T_E0_Set = 0x3062; // 2 Byte Integer
constexpr uint16_t VP_T_E1_Is = 0x3064; // 4 Byte Integer
// reserved to support up to 6 Extruders:
//constexpr uint16_t VP_T_E1_Set = 0x3066; // 2 Byte Integer
//constexpr uint16_t VP_T_E2_Is = 0x3068; // 4 Byte Integer
//constexpr uint16_t VP_T_E2_Set = 0x306A; // 2 Byte Integer
//constexpr uint16_t VP_T_E3_Is = 0x306C; // 4 Byte Integer
//constexpr uint16_t VP_T_E3_Set = 0x306E; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3070; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3072; // 2 Byte Integer
//constexpr uint16_t VP_T_E4_Is = 0x3074; // 4 Byte Integer
//constexpr uint16_t VP_T_E4_Set = 0x3076; // 2 Byte Integer
//constexpr uint16_t VP_T_E5_Is = 0x3078; // 4 Byte Integer
//constexpr uint16_t VP_T_E5_Set = 0x307A; // 2 Byte Integer
constexpr uint16_t VP_T_Bed_Is = 0x3080; // 4 Byte Integer
constexpr uint16_t VP_T_Bed_Set = 0x3082; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E0 = 0x3090; // 2 Byte Integer
constexpr uint16_t VP_Flowrate_E1 = 0x3092; // 2 Byte Integer
// reserved for up to 6 Extruders:
//constexpr uint16_t VP_Flowrate_E2 = 0x3094;
//constexpr uint16_t VP_Flowrate_E3 = 0x3096;
//constexpr uint16_t VP_Flowrate_E4 = 0x3098;
//constexpr uint16_t VP_Flowrate_E5 = 0x309A;
constexpr uint16_t VP_Fan0_Percentage = 0x3100; // 2 Byte Integer (0..100)
//constexpr uint16_t VP_Fan1_Percentage = 0x33A2; // 2 Byte Integer (0..100)
//constexpr uint16_t VP_Fan2_Percentage = 0x33A4; // 2 Byte Integer (0..100)
//constexpr uint16_t VP_Fan3_Percentage = 0x33A6; // 2 Byte Integer (0..100)
constexpr uint16_t VP_Feedrate_Percentage = 0x3102; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintProgress_Percentage = 0x3104; // 2 Byte Integer (0..100)
constexpr uint16_t VP_PrintTime = 0x3106;
constexpr uint16_t VP_PrintTime_LEN = 10;
constexpr uint16_t VP_PrintAccTime = 0x3160;
constexpr uint16_t VP_PrintAccTime_LEN = 32;
constexpr uint16_t VP_PrintsTotal = 0x3180;
constexpr uint16_t VP_PrintsTotal_LEN = 16;
// Actual Position
constexpr uint16_t VP_XPos = 0x3110; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_YPos = 0x3112; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_ZPos = 0x3114; // 4 Byte Fixed point number; format xxx.yy
constexpr uint16_t VP_EPos = 0x3120; // 4 Byte Fixed point number; format xxx.yy
// SDCard File Listing
constexpr uint16_t VP_SD_FileName_LEN = 32; // LEN is shared for all entries.
constexpr uint16_t DGUS_SD_FILESPERSCREEN = 5; // FIXME move that info to the display and read it from there.
constexpr uint16_t VP_SD_FileName0 = 0x3200;
constexpr uint16_t VP_SD_FileName1 = 0x3220;
constexpr uint16_t VP_SD_FileName2 = 0x3240;
constexpr uint16_t VP_SD_FileName3 = 0x3260;
constexpr uint16_t VP_SD_FileName4 = 0x3280;
constexpr uint16_t VP_SD_Print_ProbeOffsetZ = 0x32A0; //
constexpr uint16_t VP_SD_Print_Filename = 0x32C0; //
// Fan status
constexpr uint16_t VP_FAN0_STATUS = 0x3300;
constexpr uint16_t VP_FAN1_STATUS = 0x3302;
//constexpr uint16_t VP_FAN2_STATUS = 0x3304;
//constexpr uint16_t VP_FAN3_STATUS = 0x3306;
// Heater status
constexpr uint16_t VP_E0_STATUS = 0x3310;
//constexpr uint16_t VP_E1_STATUS = 0x3312;
//constexpr uint16_t VP_E2_STATUS = 0x3314;
//constexpr uint16_t VP_E3_STATUS = 0x3316;
//constexpr uint16_t VP_E4_STATUS = 0x3318;
//constexpr uint16_t VP_E5_STATUS = 0x331A;
constexpr uint16_t VP_BED_STATUS = 0x331C;
constexpr uint16_t VP_MOVE_OPTION = 0x3400;
// Step per mm
constexpr uint16_t VP_X_STEP_PER_MM = 0x3600; // at the moment , 2 byte unsigned int , 0~1638.4
//constexpr uint16_t VP_X2_STEP_PER_MM = 0x3602;
constexpr uint16_t VP_Y_STEP_PER_MM = 0x3604;
//constexpr uint16_t VP_Y2_STEP_PER_MM = 0x3606;
constexpr uint16_t VP_Z_STEP_PER_MM = 0x3608;
//constexpr uint16_t VP_Z2_STEP_PER_MM = 0x360A;
constexpr uint16_t VP_E0_STEP_PER_MM = 0x3610;
//constexpr uint16_t VP_E1_STEP_PER_MM = 0x3612;
//constexpr uint16_t VP_E2_STEP_PER_MM = 0x3614;
//constexpr uint16_t VP_E3_STEP_PER_MM = 0x3616;
//constexpr uint16_t VP_E4_STEP_PER_MM = 0x3618;
//constexpr uint16_t VP_E5_STEP_PER_MM = 0x361A;
// PIDs
constexpr uint16_t VP_E0_PID_P = 0x3700; // at the moment , 2 byte unsigned int , 0~1638.4
constexpr uint16_t VP_E0_PID_I = 0x3702;
constexpr uint16_t VP_E0_PID_D = 0x3704;
constexpr uint16_t VP_BED_PID_P = 0x3710;
constexpr uint16_t VP_BED_PID_I = 0x3712;
constexpr uint16_t VP_BED_PID_D = 0x3714;
// Wating screen status
constexpr uint16_t VP_WAITING_STATUS = 0x3800;
// SPs for certain variables...
// located at 0x5000 and up
// Not used yet!
// This can be used e.g to make controls / data display invisible
constexpr uint16_t SP_T_E0_Is = 0x5000;
constexpr uint16_t SP_T_E0_Set = 0x5010;
constexpr uint16_t SP_T_E1_Is = 0x5020;
constexpr uint16_t SP_T_Bed_Is = 0x5030;
constexpr uint16_t SP_T_Bed_Set = 0x5040;

7
Marlin/src/lcd/extensible_ui/ui_api.h
View File

@ -56,6 +56,7 @@ namespace ExtUI {
enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5 };
enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED, CHAMBER };
enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5 };
enum result_t : uint8_t { PID_BAD_EXTRUDER_NUM, PID_TEMP_TOO_HIGH, PID_TUNING_TIMEOUT, PID_DONE };
constexpr uint8_t extruderCount = EXTRUDERS;
constexpr uint8_t hotendCount = HOTENDS;
@ -318,6 +319,12 @@ namespace ExtUI {
void onLoadSettings(const char *);
void onConfigurationStoreWritten(bool success);
void onConfigurationStoreRead(bool success);
#if ENABLED(POWER_LOSS_RECOVERY)
void OnPowerLossResume();
#endif
#if HAS_PID_HEATING
void OnPidTuning(const result_t rst);
#endif
};
/**

71
Marlin/src/lcd/extui_dgus_lcd.cpp
View File

@ -28,7 +28,7 @@
#include "../inc/MarlinConfigPre.h"
#if ENABLED(DGUS_LCD)
#if HAS_DGUS_LCD
#include "extensible_ui/ui_api.h"
#include "extensible_ui/lib/dgus/DGUSDisplay.h"
@ -88,8 +88,69 @@ namespace ExtUI {
void onStatusChanged(const char * const msg) { ScreenHandler.setstatusmessage(msg); }
void onFactoryReset() {}
void onLoadSettings() {}
void onStoreSettings() {}
}
void onStoreSettings(char *buff) {
// Called when saving to EEPROM (i.e. M500). If the ExtUI needs
// permanent data to be stored, it can write up to eeprom_data_size bytes
// into buff.
#endif // DGUS_LCD
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct));
}
void onLoadSettings(const char *buff) {
// Called while loading settings from EEPROM. If the ExtUI
// needs to retrieve data, it should copy up to eeprom_data_size bytes
// from buff
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct));
}
void onConfigurationStoreWritten(bool success) {
// Called after the entire EEPROM has been written,
// whether successful or not.
}
void onConfigurationStoreRead(bool success) {
// Called after the entire EEPROM has been read,
// whether successful or not.
}
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
// Called when any mesh points are updated
}
#if ENABLED(POWER_LOSS_RECOVERY)
void OnPowerLossResume() {
// Called on resume from power-loss
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POWER_LOSS);
}
#endif
#if HAS_PID_HEATING
void OnPidTuning(const result_t rst) {
// Called for temperature PID tuning result
SERIAL_ECHOLNPAIR("OnPidTuning:",rst);
switch(rst) {
case PID_BAD_EXTRUDER_NUM:
ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_BAD_EXTRUDER_NUM));
break;
case PID_TEMP_TOO_HIGH:
ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_TEMP_TOO_HIGH));
break;
case PID_TUNING_TIMEOUT:
ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_TIMEOUT));
break;
case PID_DONE:
ScreenHandler.setstatusmessagePGM(PSTR(MSG_PID_AUTOTUNE_FINISHED));
break;
}
ScreenHandler.GotoScreen(DGUSLCD_SCREEN_MAIN);
}
#endif
}
#endif // HAS_DGUS_LCD

12
Marlin/src/lcd/extui_example.cpp
View File

@ -92,6 +92,18 @@ namespace ExtUI {
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
// Called when any mesh points are updated
}
#if ENABLED(POWER_LOSS_RECOVERY)
void OnPowerLossResume() {
// Called on resume from power-loss
}
#endif
#if HAS_PID_HEATING
void OnPidTuning(const result_t rst) {
// Called for temperature PID tuning result
}
#endif
}
#endif // EXTUI_EXAMPLE && EXTENSIBLE_UI

18
Marlin/src/module/temperature.cpp
View File

@ -32,6 +32,9 @@
#include "planner.h"
#include "../core/language.h"
#include "../HAL/shared/Delay.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../lcd/extensible_ui/ui_api.h"
#endif
#if ENABLED(MAX6675_IS_MAX31865)
#include "Adafruit_MAX31865.h"
@ -399,6 +402,9 @@ volatile bool Temperature::temp_meas_ready = false;
if (target > GHV(BED_MAXTEMP - 10, temp_range[heater].maxtemp - 15)) {
SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH);
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH);
#endif
return;
}
@ -512,6 +518,9 @@ volatile bool Temperature::temp_meas_ready = false;
#endif
if (current_temp > target + MAX_OVERSHOOT_PID_AUTOTUNE) {
SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH);
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH);
#endif
break;
}
@ -554,6 +563,9 @@ volatile bool Temperature::temp_meas_ready = false;
#define MAX_CYCLE_TIME_PID_AUTOTUNE 20L
#endif
if (((ms - t1) + (ms - t2)) > (MAX_CYCLE_TIME_PID_AUTOTUNE * 60L * 1000L)) {
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_TUNING_TIMEOUT);
#endif
SERIAL_ECHOLNPGM(MSG_PID_TIMEOUT);
break;
}
@ -602,6 +614,9 @@ volatile bool Temperature::temp_meas_ready = false;
#if ENABLED(PRINTER_EVENT_LEDS)
printerEventLEDs.onPidTuningDone(color);
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_DONE);
#endif
goto EXIT_M303;
}
@ -613,6 +628,9 @@ volatile bool Temperature::temp_meas_ready = false;
#if ENABLED(PRINTER_EVENT_LEDS)
printerEventLEDs.onPidTuningDone(color);
#endif
#if ENABLED(EXTENSIBLE_UI)
ExtUI::OnPidTuning(ExtUI::result_t::PID_DONE);
#endif
EXIT_M303:
#if ENABLED(NO_FAN_SLOWING_IN_PID_TUNING)

6
config/default/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/default/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/3DFabXYZ/Migbot/Configuration.h
View File

@ -2062,9 +2062,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/ADIMLab/Gantry v1/Configuration.h
View File

@ -2031,9 +2031,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/ADIMLab/Gantry v2/Configuration.h
View File

@ -2031,9 +2031,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/AlephObjects/TAZ4/Configuration.h
View File

@ -2050,9 +2050,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Alfawise/U20-bltouch/Configuration.h
View File

@ -2110,9 +2110,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View File

@ -1244,6 +1244,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Alfawise/U20/Configuration.h
View File

@ -2109,9 +2109,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Alfawise/U20/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/AliExpress/CL-260/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

6
config/examples/AliExpress/UM2pExt/Configuration.h
View File

@ -2041,9 +2041,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/A2/Configuration.h
View File

@ -2032,9 +2032,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/A2/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/A2plus/Configuration.h
View File

@ -2032,9 +2032,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/A6/Configuration.h
View File

@ -2147,9 +2147,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/A6/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/A8/Configuration.h
View File

@ -2058,9 +2058,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/A8/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/A8plus/Configuration.h
View File

@ -2041,9 +2041,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/E10/Configuration.h
View File

@ -2033,9 +2033,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/E10/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Anet/E16/Configuration.h
View File

@ -2042,9 +2042,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Anet/E16/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/AnyCubic/i3/Configuration.h
View File

@ -2040,9 +2040,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/ArmEd/Configuration.h
View File

@ -2031,9 +2031,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/ArmEd/Configuration_adv.h
View File

@ -1247,6 +1247,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Artillery/Genius/Configuration.h
View File

@ -2013,9 +2013,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Artillery/Genius/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Artillery/Sidewinder X1/Configuration.h
View File

@ -2035,9 +2035,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Azteeg/X5GT/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

6
config/examples/BIBO/TouchX/cyclops/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BIBO/TouchX/default/Configuration.h
View File

@ -2030,9 +2030,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BQ/Hephestos/Configuration.h
View File

@ -2018,9 +2018,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BQ/Hephestos_2/Configuration.h
View File

@ -2031,9 +2031,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1251,6 +1251,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BQ/WITBOX/Configuration.h
View File

@ -2018,9 +2018,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h
View File

@ -2022,9 +2022,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h
View File

@ -2023,9 +2023,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Cartesio/Configuration.h
View File

@ -2029,9 +2029,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Cartesio/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-10/Configuration.h
View File

@ -2040,9 +2040,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-10S/Configuration.h
View File

@ -2031,9 +2031,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-10_5S/Configuration.h
View File

@ -2033,9 +2033,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-10mini/Configuration.h
View File

@ -2049,9 +2049,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-20 Pro/Configuration.h
View File

@ -2034,9 +2034,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-20/Configuration.h
View File

@ -2034,9 +2034,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-20/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/CR-8/Configuration.h
View File

@ -2040,9 +2040,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

38
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1243,6 +1243,44 @@
#endif // HAS_GRAPHICAL_LCD
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD
#define DGUS_SERIAL_PORT 2
#define DGUS_BAUDRATE 115200
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#else
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
#define DGUS_FILAMENT_LOADUNLOAD
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
#define DGUS_FILAMENT_PURGE_LENGTH 10
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
#endif
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
#if ENABLED(DGUS_UI_WAITING)
#define DGUS_UI_WAITING_STATUS 10
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
#endif
#endif
#endif // HAS_DGUS_LCD
//
// Touch UI for the FTDI Embedded Video Engine (EVE)
//

6
config/examples/Creality/Ender-2/Configuration.h
View File

@ -2034,9 +2034,11 @@
//=============================================================================
//
// DGUS Touch Display with DWIN OS
// DGUS Touch Display with DWIN OS. (Choose one.)
//
//#define DGUS_LCD
//#define DGUS_LCD_UI_ORIGIN
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//
// Touch-screen LCD for Malyan M200 printers

Some files were not shown because too many files have changed in this diff Show More