bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
14,098 Commits 1 Branch 4 Tags 151 MiB
6fd7f4fe1b
Commit Graph

1067 Commits

Author SHA1 Message Date
InsanityAutomation
798f34abcd Float XY probe offset followup (probe edge) (#15928) 2019-11-19 23:29:52 -06:00
Evgeny-SPB
7116a8645c G34 logic / typo fix (#15938) 2019-11-19 23:25:07 -06:00
InsanityAutomation
4d4e692c81 Match onMeshUpdate() index sign (#15920) 2019-11-19 23:16:43 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28 
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode...   It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'. 

It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28.   The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
 2019-11-15 15:42:01 -06:00
Scott Lahteine
602ca5dea6 No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY 2019-11-13 02:07:17 -06:00
Roman Moravčík
e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
danym21
28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
Jason Smith
770adcfa15 Raise Z before homing X/Y on unknown Z (#15859) 2019-11-10 16:21:20 -06:00
ellensp
7b29c60c46 Fix compile with chamber enabled (#15862) 2019-11-10 16:15:08 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
Scott Lahteine
ca6d00b862 Save some string flash 2019-11-02 00:48:05 -05:00
Scott Lahteine
ad28da7eb4 Patch ABL G29 loop 
Followup to e3ddf6e81a
 2019-11-01 15:39:05 -05:00
Scott Lahteine
e7d9db284e Followup to M240 patch 2019-10-31 17:27:19 -05:00
Raúl Lázaro Sánchez
7c60853219 Fix blocking delay in Photo G-code M240 (#15728) 2019-10-31 17:14:11 -05:00
Scott Lahteine
4e6e02bc3e Include pause.h for M701-702 2019-10-31 13:18:50 -05:00
Scott Lahteine
e3ddf6e81a Fix meshCount signed-ness 2019-10-31 13:18:50 -05:00
Scott Lahteine
c80eda073f M119 => report_states 2019-10-30 15:24:10 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print (#15703) 2019-10-27 17:49:27 -05:00
Scott Lahteine
ab0fe1a7dd Tweak G29 faux point 2019-10-26 14:41:54 -05:00
Scott Lahteine
732bf89878 Get 'cancelable' for gcode.cpp 2019-10-25 19:38:23 -05:00
Scott Lahteine
014b739bac Fix M486 int parameters 2019-10-25 19:19:33 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 (#15590) 2019-10-24 15:35:40 -05:00
InsanityAutomation
82fb046013 Allow suicide pin inverting (#15586) 2019-10-24 14:07:28 -05:00
Jacob Jordan
9895e6d766 Only use slow homing speed where applicable (#15640) 2019-10-24 13:14:45 -05:00
Robby Candra
cf8541a7a7 Fix G92.9 (thus PLR Z position) (#15625) 2019-10-24 13:05:50 -05:00
Scott Lahteine
cd3ec5a77b Add error-check to M422 2019-10-24 12:59:50 -05:00
milkpirate
6bcd4eb12d Fix M420 (UBL) undefined variables (#15621) 2019-10-24 12:07:17 -05:00
Scott Lahteine
af214ff121 Fix up PSU_CONTROL checks 2019-10-22 16:16:12 -05:00
Scott Lahteine
160c8be191 Fix BABYSTEP_DISPLAY_TOTAL output 2019-10-21 13:53:19 -05:00
Scott Lahteine
0652f19673 Fix M420 for moved probe methods 2019-10-16 15:56:34 -05:00
Scott Lahteine
bb381e22b2 Fix left-shift warning 2019-10-16 15:42:46 -05:00
Bo Herrmannsen
0d7736d663 Enable M191 (#15531) 2019-10-16 15:02:37 -05:00
Jason Smith
832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks (#14437) 2019-10-15 16:10:20 -05:00
Scott Lahteine
faacfe13c2 Tweak M105 layout 2019-10-15 13:35:13 -05:00
Antti Andreimann
d47f29bd4c Give a dummy response to M105 with zero thermistors (#15568) 2019-10-15 13:30:52 -05:00
Robby Candra
e79666a82b Followup to "Fix G2/G3 rounding" (#15510) 2019-10-10 21:16:37 -05:00
LinFor
b20d5a7cc6 Estimate Remaining Time (graphical display) (#15497) 2019-10-10 21:03:33 -05:00
Ed Williams
d8aeeb8ff6 Fix G2/G3 rounding error (#15507) 2019-10-10 19:50:08 -05:00
Marcio Teixeira
6a865a6146 Multi-language support (#15453) 2019-10-09 19:46:10 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine
e84389c976
Fix G2/G3 workspace plane parameters (#15475) 2019-10-07 17:09:20 -05:00
LinFor
19b7be067c Allow M73 to override SD position (#15449) 2019-10-07 16:38:58 -05:00
Scott Lahteine
56595a4c9c Improve G2/G3 precision 
See https://github.com/MarlinFirmware/Marlin/issues/14745#issuecomment-538781253
 2019-10-07 00:03:17 -05:00
Scott Lahteine
519cc1bc67 NUM_AXIS is now obsolete 2019-10-06 22:18:16 -05:00
Scott Lahteine
0322348924 Handle runout in runout.cpp 2019-10-03 06:27:30 -05:00
Oliver Jean Eifler
d52b908627 Fix coordinate size for G26 w/out arcs (#15443) 2019-10-01 20:02:27 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
Scott Lahteine
e3fd0519b3 Reduce need for UNUSED 2019-09-30 22:56:22 -05:00
Scott Lahteine
139b7196a0
Watchdog cleanup (#15283) 2019-09-29 17:57:29 -05:00
Scott Lahteine
f307ff68f7 Multiply by float, not double 2019-09-29 17:25:27 -05:00
Alex Somesan
10bbed7f69 Fix comma/semicolon typo (#15420) 2019-09-29 16:50:53 -05:00
Scott Lahteine
50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
Scott Lahteine
7c5e6900e1 Tweak comment 2019-09-28 22:08:02 -05:00
InsanityAutomation
0ca6abce72 Add reporting to M290 (#15376) 2019-09-28 16:58:48 -05:00
InsanityAutomation
a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
InsanityAutomation
5221e2d991 Restore Host Prompt Info (#15387) 2019-09-27 17:06:26 -05:00
Scott Lahteine
d683f98019 Return buffer in duration.toString 2019-09-27 04:45:01 -05:00
Marcio Teixeira
a18d16fb8b Do not implicitly concatenate localized strings (#15383) 2019-09-27 04:38:43 -05:00
Scott Lahteine
665e45e0ba Reduce string storage, use masking 'seen' 2019-09-26 04:30:55 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type (#15349) 2019-09-26 01:28:09 -05:00
Scott Lahteine
b2e1f77f58 Fix extraneous "Home XYZ First" message 2019-09-25 21:57:20 -05:00
Scott Lahteine
25c4c2f24e Fix bool in M851 2019-09-25 08:39:11 -05:00
Scott Lahteine
da1bda493e Apply Marlin conventions to M851 2019-09-25 03:57:16 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
Robby Candra
9c288a682d Followup to probe_at_point change (#15342) 2019-09-25 02:29:10 -05:00
Scott Lahteine
5288c399ce Patch probe offset name, defines 2019-09-24 23:39:23 -05:00
Scott Lahteine
4e8d9fe59b zprobe_offset => probe_offset 2019-09-24 23:36:09 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Scott Lahteine
5e13fe989f Rename some feedrate-oriented functions 2019-09-23 22:36:41 -05:00
Scott Lahteine
13d725d24d Tweak debug messages 2019-09-20 23:35:22 -05:00
Scott Lahteine
1a1375964f Drop unused G26 function 2019-09-18 04:07:14 -05:00
Scott Lahteine
b71a755a30 Add float suffix in G33 2019-09-17 23:30:27 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor (#15289) 2019-09-17 18:16:28 -05:00
Bas Stottelaar
847e4ced11 Fix M43 without watchdog (#15280) 2019-09-16 16:09:43 -05:00
Scott Lahteine
d5f5203880 Use "mount" as card verb 2019-09-15 03:12:44 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor (#15256) 2019-09-14 03:05:10 -05:00
Scott Lahteine
f9992c5f33 Implausible 2019-09-11 02:52:14 -05:00
Scott Lahteine
6091e6300a
Fix G90, G91, M82, M83 rel/abs modes (#15218) 2019-09-11 01:29:33 -05:00
Scott Lahteine
c590e8ac05
Improve Power-loss Recovery (#15135) 2019-09-10 18:52:41 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton (#15191) 2019-09-10 18:48:58 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
Scott Lahteine
841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO (#15210) 2019-09-09 15:43:06 -05:00
InsanityAutomation
0693767efa ExtUI Pause/Stop on all Pause/Stop (#15188) 2019-09-08 01:47:07 -05:00
Lucio Tarantino
8ac52aedff M118 multiserial support (#15176) 2019-09-08 00:57:59 -05:00
Jamie
dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
Ludy
068c303742 More translatable LCD strings (#15190) 2019-09-08 00:15:25 -05:00
Scott Lahteine
7496e1cd67 whitespace 2019-09-04 21:55:41 -05:00
Jamie
293b890940 Apply soft limits to G2/G3 final target (#15156) 2019-09-04 13:02:30 -05:00
Giuliano Zaro
9958f5e322 Home on G34 if steppers slept (#15127) 2019-09-02 02:44:48 -05:00
Scott Lahteine
a2e412c0ce Rename command buffer var 2019-09-01 20:43:31 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection (#15111) 2019-08-31 19:44:45 -05:00
Luu Lac
081e4506ca Fix G53 as prefix, G28 with CNC_COORDINATE_SYSTEMS (#15069) 2019-08-28 04:20:28 -05:00
InsanityAutomation
b7796bcce6 Disable steppers on M112 (#15065) 
And change verbiage to not refer to "Emergency Stop."
 2019-08-28 00:51:01 -05:00
InsanityAutomation
f218405c36 Fix ExtUI invalid speed, timer (#15031) 2019-08-25 04:46:02 -05:00
Scott Lahteine
dd6efe96e7 Restore documented M503 behavior 2019-08-22 18:58:11 -05:00
InsanityAutomation
af5a7a2925 Add missing ExtUI user confirmation (#14992) 2019-08-18 21:03:26 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Joseph Bozarth
0fbb26c28f M16 - Expected Printer Check (#14924) 2019-08-13 23:38:45 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f (#14869) 
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
 2019-08-08 01:51:37 -05:00
Chris Pepper
f499cecf0d Marlin Binary Protocol Mark II (#14817) 2019-08-05 20:41:53 -05:00
Acenotass
4af9908764 Update M48 command in the status line (#14816) 2019-08-05 20:01:40 -05:00
teemuatlut
d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
InsanityAutomation
f59a7e8b07 Print/display ABL current probe point (#14788) 2019-08-01 20:11:26 -05:00
InsanityAutomation
6f8b8c394d Homing backoff per-axis / delta Z (#14789) 2019-07-31 20:50:23 -05:00
Scott Lahteine
c2b319360d Remove extra pragmas 2019-07-30 20:19:47 -05:00
Acenotass
659d06d9b9 M48 menu item, result to status (#14772) 2019-07-30 02:31:14 -05:00
rafaljot
e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
Scott Lahteine
eae543adf3 Apply HAS_SPI_LCD as needed 2019-07-29 18:55:05 -05:00
Giuliano Zaro
290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Scott Lahteine
17abb94532 Whitespace patch 2019-07-28 01:29:23 -05:00
Ludy
97e9c95f47 Fix & clean up ExtUI (#14748) 2019-07-27 22:44:05 -05:00
Scott Lahteine
a3dc1e461b Update M7219 comment, tweak parameter code 2019-07-24 21:09:51 -05:00
Scott Lahteine
1088846cae Cosmetic updates from 14044 2019-07-24 01:52:36 -05:00
InsanityAutomation
dc6fa04f68 Fix single nozzle temp change, do slower extra prime (#14696) 2019-07-21 19:33:37 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
Jason Smith
f2c5740d06 Add 'E' argument to G34 to allow stowing between probes (#14533) 
- Use the return value from probe_pt during `G34`
  Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
 2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f Finish G12, update Nozzle::clean (#14642) 2019-07-17 04:23:19 -05:00
Marcio Teixeira
27c487bab7 Print progress enhancements (#14647) 2019-07-17 03:14:44 -05:00
Scott Lahteine
eaf1c0954e Update some precompiler tests 2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2 Variable tool change purge (#14618) 2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8 Fix process_injected_command undefined behavior (#14602) 2019-07-14 10:12:48 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Robby Candra
e96468566d Fix Z_PROBE_END_SCRIPT in ABL (#14621) 2019-07-14 04:28:38 -05:00
scotthsl
19b24a349c Fix M412 without HOST_ACTION_COMMANDS (#14591) 2019-07-12 04:23:33 -05:00
Scott Lahteine
ed0e6afacb Apply LIMIT macro 2019-07-10 03:35:39 -05:00
Bob Kuhn
dc02d0720d Pins Debugging for STM32 — NEEDS TESTING (#14309) 2019-07-05 22:08:06 -05:00
Scott Lahteine
fe02241044 NONE on combined options 2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a Add include guards to some headers 2019-07-05 04:02:08 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class (#14479) 2019-07-02 08:39:55 -05:00
GMagician
82ecaa767e Remove unused code in M100 
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
 2019-07-01 20:38:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore (#14446) 2019-06-29 22:49:50 -05:00
Marcio Teixeira
e6cf7860e8 Improve ExtUI, fix compiler errors, warnings (#14441) 2019-06-29 00:23:57 -05:00
Darsey Litzenberger
946f6bdeaa Disable leveling during G12 (#14385) 2019-06-28 19:23:42 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Tim Moore
81209f5310 'M105 R' to report redundant temp sensor (#14324) 2019-06-27 21:29:52 -05:00
InsanityAutomation
ce656e2a26 Update G-code injection, sub-commands (#14418) 2019-06-27 15:07:45 -05:00
Scott Lahteine
2580104c8b Revert recent probe changes 
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)"
- Revert "Fix G28 with non-BLTouch probes (#14381)"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)"
- Revert "Apply needed BLTouch patch (#14233)"

Co-Authored-By: AnHardt <github@kitelab.de>
 2019-06-26 05:33:43 -05:00
BigIronGuru
9f136a7c67 Low-priority homing in G34 (#14391) 2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5 Shorthand for home-after-deactivate 2019-06-26 03:47:55 -05:00
Marcio Teixeira
8e23e9b16c Fix FIX_MOUNTED_PROBE compile error (#14393) 2019-06-25 04:55:29 -05:00
Scott Lahteine
cf762d2c73 Fix enqueueing bug 2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f Update G34 for non-BLTouch probes (#14380) 2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36 Fix G28 with non-BLTouch probes (#14381) 2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00