Commit Graph

1256 Commits

Author SHA1 Message Date
Victor Oliveira
c0920bbf6a
TFT Refactoring (#19192)
* split tft folder in two: tft for color ui; tft_io for shared tft code

* after the files got moved, now the code was moved to the right place

* classic ui using TFT IO init lcd codes

* feature to compile tft_io when enabled

* compiling fix

* lvgl spi tft working with tft io init codes

* there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything

* remove debug

* base for TFT rotation and mirroring API, and ILI9488 support

* ST7796S rotate and mirror support

* ST7789V rotate and mirror support

* ST7735 rotate and mirror support

* ILI9341 rotate and mirror support

* ILI9328 rotate and mirror support

* R61505 rotate and mirror support

* MKS TFT definitions

* more configs for mks tfts

* update config

* naming typo

* to configure the user interface

* ANYCUBIC_TFT35

* tft configs

* support for SSD1963

* tft display types

* updated conditionals lcd; first board fully working with the new code - all 3 ui!

* compatiblity

* changed name

* move classic ui file name

* rename TURN -> ROTATE

* GRAPHICAL_TFT_ROTATE_180 deprecated

* first fsmc board fully working - chitu v5

* mks robin nano v1.2 + tft 35 ok!

* right pin name

* anycubic tft tested in a TRIGORILLA_PRO

* chitu v6

* nano 32 tft orientation

* mks tft43

* mks tft43 rotation

* fixed LONGER LK tft setup

* GRAPHICAL_TFT_UPSCALE defined by the display type

* better offsets defaults

* Update Configuration.h

* Update tft_fsmc.cpp

* Update Conditionals_LCD.h

* Tweak comments

* update nano tests

* Revert "update nano tests"

This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65.

* default tft

* outdated comments

* to not break non-vscode builds

* upscale tft 35

* support tft 180 rotation for color ui

* Each TFT Driver is responsible for its default color mode.

* use auto detect in mks displays, because some of them could be shipped with diferent drivers

* extra s

* unused code

* wrong -1

* missing mirror options

* Smaller regex pattern

* Comment updates

* Clean up old defines

* Apply pins formatting

* GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180

* MKS_ROBIN_TFT_V1_1R

* merge fix

* correct resolution

* auto is default, dont need be there, and it will allow the user to configure it even for named displays

* to not use rotation with MKS_ROBIN_TFT_V1_1R

* i like () in macros

* avoid sleepy commits

* default for st7789 is rgb

* nano follow up

* to allow ili9328 rotation

* default is rgb

* boards merge follow up

* to match bootloader orientation

* HAS_TOUCH_XPT2046 is not hal specific anymore

* lets not forget LPC

* 180 rotation for ili9328 and R61505

* Clean up whitespace

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-12 16:38:07 -05:00
Jason Smith
a866a758cc
Allow MAX31865 resistance values configuration (#19695) 2020-10-12 00:40:39 -05:00
Scott Lahteine
c25c31b1de Sync config to examples 2020-10-05 17:16:42 -05:00
Scott Lahteine
44d50c2bd3 Move SF_ARC_FIX option 2020-10-04 15:46:00 -05:00
qwewer0
4424645e04
Multi-line comments cleanup (#19535) 2020-09-28 14:53:50 -05:00
Scott Lahteine
4584a52ba5 Update configs to 020007 2020-09-28 03:55:14 -05:00
Serhiy-K
27bdf4b24e
MarlinUI for SPI/I2C TFT-GLCD character-based display bridge (#19375) 2020-09-28 01:52:38 -05:00
Emperor
00c09e95ac
Thermistor: Kis3d Silicone heater + precision cast plate (#19528) 2020-09-27 21:38:30 -05:00
Scott Lahteine
dd118e2f36 Drop extra Bed PID 2020-09-27 16:55:57 -05:00
Jason Smith
da6c8317a7
Fix and improve STM32F1 serial (#19464) 2020-09-24 20:28:48 -05:00
Jason Smith
9d5a9621de
Demo and test multiple PID defaults (#19413) 2020-09-17 03:06:01 -05:00
Victor Sokolov
e97e6865c3
MarkForged kinematics (#19235) 2020-09-03 20:12:53 -05:00
Zachary Annand
97ec6c1be6
Independent Neopixel option (#19115) 2020-08-27 14:18:16 -05:00
Scott Lahteine
a96c5209d1 Fix small typø 2020-08-27 14:01:36 -05:00
Scott Lahteine
4955aa5b78 Prusa => Průša 2020-08-26 02:15:50 -05:00
Scott Lahteine
c488070859 Minor cleanup w/r/t LEDs 2020-08-23 23:57:51 -05:00
Scott Lahteine
638f6f0f06 Neopixel => NeoPixel 2020-08-23 03:14:11 -05:00
Mathew Winters
ca105493aa
NOZZLE_CLEAN_NO_Y (#18870) 2020-08-22 16:20:37 -05:00
qwewer0
434e43cc42
Change XY_PROBE_SPEED format to (x*60) (#18997) 2020-08-22 02:04:28 -05:00
Giuliano Zaro
8652a7bdd2
HIGH/LOW naming of pin state settings (#19089) 2020-08-21 23:13:43 -05:00
Keith Bennett
7e65464dd7
Fix M512 comment (#19108) 2020-08-21 17:04:32 -05:00
Scott Lahteine
38cd7b9938 Config adjustments 2020-08-19 22:42:54 -05:00
Giuliano Zaro
3426c7fc94
Configurable number of M106 fans (#18883) 2020-08-19 20:11:20 -05:00
Steven Haigh
a62ae2aa2d
Default Filament Runout Sensor enabled state (#19013) 2020-08-19 18:58:18 -05:00
ellensp
5038cddfd5
Add option to arrange Neopixel sets in series (#18992) 2020-08-14 08:25:45 -05:00
sherwin-dc
852e5ae042
Password via G-code and MarlinUI (#18399)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 20:00:42 -05:00
wmariz
da4eaebdc9
ZoneStar Z6FB (#18918)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-07 17:03:59 -05:00
Marco Burato
6bcfb58cd4
More Anycubic + Trigorilla mappings, ExtUI (#18903) 2020-08-06 05:38:18 -05:00
swissnorp
4856ac5028
Add Z_AFTER_DEACTIVATE to account for gravity (#18906) 2020-08-04 00:31:45 -05:00
Scott Lahteine
90158f9f67 Repair config order 2020-07-30 02:27:52 -05:00
Alexander Gavrilenko
117df87d19
Support for TFT & Touch Screens (#18130) 2020-07-30 01:43:19 -05:00
Victor Oliveira
38ce5966e1
SPI Emulated DOGM (like FSMC_GRAPHICAL_TFT, but SPI) (#18817) 2020-07-29 21:25:07 -05:00
Scott Lahteine
5eae8e7830 Update keypad link 2020-07-29 15:44:05 -05:00
Giuliano Zaro
05d95171cc
Clarify Nozzle-to-Probe offset (#18828)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-29 14:35:31 -05:00
Scott Lahteine
de68b3753f Config for Anycubic Mega TFT 2020-07-26 19:50:43 -05:00
ellensp
b9f0c06d83
Add 0 to EXTRUDERS :[json] (#18786) 2020-07-26 15:41:50 -05:00
Scott Lahteine
bc688f27dc Clean up after changes 2020-07-25 01:53:07 -05:00
MKS-Sean
d20d459132 Robin nano V2, TFT LVGL UI parameters, and more (#18500) 2020-07-25 01:18:06 -05:00
Scott Lahteine
d1e20eb29f Update links, README, contributing, etc. 2020-07-23 20:46:51 -05:00
Diego von Deschwanden
42fbd527f3
Fix links to secure sites (#18745) 2020-07-22 22:20:14 -05:00
InsanityAutomation
b4b19aef7f
Custom Nozzle Wipe (#18736) 2020-07-22 01:42:44 -05:00
Speaka
2c238e4fc2
Option for extra endstop check (#18424) 2020-07-12 13:16:56 -05:00
Scott Lahteine
b6051efe5b Capitalize "G-code" 2020-07-10 01:35:37 -05:00
Giuliano Zaro
95c2cc3966
Remove outdated comment (#18597) 2020-07-09 01:43:59 -05:00
Scott Lahteine
8a55f9405c Fix some comments 2020-07-08 06:53:03 -05:00
Robby Candra
c02451b602
Filament Runout Inverting => State (#18537)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-05 17:42:19 -05:00
George Fu
097347b575
Add FYSETC 2.42 inch OLED support (#18485) 2020-07-02 20:33:52 -05:00
Victor Oliveira
e5bc9d31cc
Add TFT_LVGL_UI support (#18438) 2020-07-01 01:30:24 -05:00
Scott Lahteine
59e4de8a55
Add Romanian language (#18455)
Co-authored-by: cristyanul <47246451+cristyanul@users.noreply.github.com>
2020-06-27 22:59:44 -05:00
InsanityAutomation
3b80690a71
ExtUI additions (#18447)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-06-27 22:02:28 -05:00
Scott Lahteine
2139141f99 Graphical LCD note 2020-06-23 16:13:21 -05:00
Scott Lahteine
caeba33d28 Sensor 502 and PTC cleanup 2020-06-16 14:08:51 -05:00
thisiskeithb
2603a237f9
Add MKS LCD12864 A/B Controller Support (#18120) 2020-06-16 02:43:09 -05:00
Scott Lahteine
f4c258dc23
Creality Ender 3 v2 (#17719) 2020-06-16 01:45:27 -05:00
makerbase
642112d3eb
Add MKS UI (TFT_LITTLE_VGL_UI) (#18071) 2020-06-15 21:05:33 -05:00
XDA-Bam
a4b46eaf8f
Add JD_HANDLE_SMALL_SEGMENTS option (#18316) 2020-06-15 18:54:00 -05:00
Scott Lahteine
75119c433a Default filament 1.75mm 2020-06-09 23:20:20 -05:00
ellensp
ce62209bce
Probe margin. Bump config version (#18140)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-02 20:41:50 -05:00
Scott Lahteine
bce9527709 Whitespace 2020-05-19 01:32:56 -05:00
Jason Smith
94063e3a87
Fix PID + Thermal Protection combos (#18023) 2020-05-18 13:51:32 -05:00
Scott Lahteine
e6079bd14e Correct endstop noise comment 2020-05-11 20:16:48 -05:00
George Fu
34a2fd7b09
DGUS minor fixups (#17901) 2020-05-08 01:24:27 -05:00
Axel
7613383e7b
Add Rostock 301 thermistors (22, 23) (#17806) 2020-05-02 18:45:54 -05:00
Stephan
e7a6a52eda
Use center defines for Z Safe Homing XY (#17782) 2020-04-28 18:12:56 -05:00
studiodyne
89b17b5463
Followup fixes for singlenozzle, etc. (#17712) 2020-04-28 00:21:23 -05:00
studiodyne
58ac9f257c
NOZZLE_PARK_FEATURE - X/Y only axis move (#17697) 2020-04-25 10:42:34 -05:00
Ondřej Nový
d2a5d51f69
Add NOZZLE_PARK_Z_RAISE_MIN (#17624) 2020-04-24 22:39:08 -05:00
Scott Lahteine
e11a806460 Revert config replace 2020-04-23 22:36:05 -05:00
Scott Lahteine
55d66fb897 Add HAS_JUNCTION_DEVIATION 2020-04-23 21:53:51 -05:00
Scott Lahteine
5d0deba938 Longer default power-up delay
See MarlinFirmware/Configurations#78
2020-04-20 00:12:22 -05:00
djessup
360e07c90f
Add USE_PROBE_FOR_Z_HOMING option (#17359) 2020-04-17 09:02:21 -05:00
Scott Lahteine
3fcb36d8dc M200/M300 LCD comment 2020-04-17 03:44:50 -05:00
Zs.Antal
78a5079558
Add Hungarian language (#17491)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-16 04:11:42 -05:00
thisiskeithb
089a0af119
More info on E3D, Keenovo, and Wanhao thermistors (#17561) 2020-04-16 00:04:53 -05:00
Scott Lahteine
e3321920f3 Update Marlin website links to https 2020-04-12 17:21:14 -05:00
grauerfuchs
293a0997c9
Fix / optimize PCA9533 LED (Mightyboard) (#17381) 2020-04-08 12:53:28 -05:00
Scott Lahteine
f2ed18d150 M303 followup
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off (#17284)
M303 D will now toggle activation of PID_DEBUG output.   This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
Scott Lahteine
e7a9f17371 Tweak serial port descriptions 2020-03-21 23:38:44 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board (#17188) 2020-03-17 15:25:10 -05:00
Scott Lahteine
090a90a036 Add EEPROM_BOOT_SILENT option 2020-03-14 19:24:35 -05:00
Scott Lahteine
8b2d55e345 Config version 020005 2020-03-13 23:22:46 -05:00
Scott Lahteine
0578e9b16e Move SENSORLESS_PROBING to the probes section
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
Scott Lahteine
02cce7d4b4 Add TRAVEL_EXTRA_XYJERK option
See #16949

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
71539bcbeb Undo driver type auto-assignment for now
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
InsanityAutomation
cc1ff27256 Bump config version to 020004 (#16816) 2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 (#16790) 2020-02-08 21:01:57 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test (#16511) 2020-02-05 20:33:39 -06:00
Scott Lahteine
bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side (#16759) 2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 (#16755) 2020-02-02 00:02:30 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic (#16731) 2020-01-30 18:00:37 -06:00
Bob Kuhn
0d166f9c7d Duet Smart Effector support (#16641) 2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
InsanityAutomation
79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2 Add HMS434 V15 ATSAM board (#16620) 2020-01-21 01:10:31 -06:00
InsanityAutomation
0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f Update FYSETC S6 pins (#16559) 2020-01-17 13:16:05 -06:00
Scott Lahteine
ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
George Fu
e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
greppp
7f87a044cd Fix Ender-2 display pins, add BTN_ENC (#16349) 2020-01-03 20:44:16 -06:00
Scott Lahteine
00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
InsanityAutomation
1c9ccce520 Add NOZZLE_AS_PROBE (no probe offsets) (#15929) 2019-12-24 00:03:08 -06:00
Scott Lahteine
af4c62b422 Update product links 2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444 Update AZSMZ LCD link (#16106) 2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962 Vendor version override (#14189)
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509)
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d Configurable TOUCH_BUTTONS repeat delays (#15245) 2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886 Tweak NOZZLE_CLEAN_START_POINT spacing 2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4 Tweak REPRAPWORLD_KEYPAD config comment 2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6 Bring Configuration.h up to date 2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen (#15057) 2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese (#13892) 2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b Adding HMS434 machine (#14931) 2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5 Fix #define typo in configs 2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25 Overlord printer thermistor (#14815) 2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630 HAL cleanup, Teensy 3.1 platform 2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57 Option to reverse select direction/buttons (#14693) 2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd More general FSMC display option 2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f More general TOUCH_BUTTONS comment 2019-07-30 04:22:27 -05:00
mikeshub
1579091c20 PID loop improvements (#14746)
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f Improve magnetic dock switching toolhead (#14663) 2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47 Robin & Longer3D SPI TFT driver (#14595) 2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f Shorten some config descriptions 2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17 OLED LCD section 2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638 RPW-Ultra thermistor table (#14517) 2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488)
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b Add links to Junction Deviation heading (#14272) 2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3 Touch-MI Menu and Manual Deploy option (#14290) 2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f Add temperature-based auto power options (#14397) 2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101)
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131)
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671)
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00