Commit Graph

1178 Commits

Author SHA1 Message Date
Scott Lahteine
e7a9f17371 Tweak serial port descriptions 2020-03-21 23:38:44 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board (#17188) 2020-03-17 15:25:10 -05:00
Scott Lahteine
090a90a036 Add EEPROM_BOOT_SILENT option 2020-03-14 19:24:35 -05:00
Scott Lahteine
8b2d55e345 Config version 020005 2020-03-13 23:22:46 -05:00
Scott Lahteine
0578e9b16e Move SENSORLESS_PROBING to the probes section
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
Scott Lahteine
02cce7d4b4 Add TRAVEL_EXTRA_XYJERK option
See #16949

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
71539bcbeb Undo driver type auto-assignment for now
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
InsanityAutomation
cc1ff27256 Bump config version to 020004 (#16816) 2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 (#16790) 2020-02-08 21:01:57 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test (#16511) 2020-02-05 20:33:39 -06:00
Scott Lahteine
bfad23d3e2 (c) 2020 2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side (#16759) 2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 (#16755) 2020-02-02 00:02:30 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic (#16731) 2020-01-30 18:00:37 -06:00
Bob Kuhn
0d166f9c7d Duet Smart Effector support (#16641) 2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0 Bring configs and drivers.h up to date 2020-01-24 23:17:52 -06:00
InsanityAutomation
79810b7fcb G12 defaults per tool. Event G-code for post-toolchange (#16554) 2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2 Add HMS434 V15 ATSAM board (#16620) 2020-01-21 01:10:31 -06:00
InsanityAutomation
0fcf2b1110 Quad Z stepper support (#16277) 2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f PINDA v2 temperature sensor / compensation (#16293) 2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f Update FYSETC S6 pins (#16559) 2020-01-17 13:16:05 -06:00
Scott Lahteine
ea7363a8f4 Update more configs 2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f Improved STMicro L64XX stepper driver support (#16452) 2020-01-13 18:47:30 -06:00
George Fu
e593da1c23 Update and fix DGUS (#16317) 2020-01-03 21:00:44 -06:00
greppp
7f87a044cd Fix Ender-2 display pins, add BTN_ENC (#16349) 2020-01-03 20:44:16 -06:00
Scott Lahteine
00c83e9ca6 Update comments re: NOZZLE_AS_PROBE 2020-01-01 19:41:23 -06:00
InsanityAutomation
1c9ccce520 Add NOZZLE_AS_PROBE (no probe offsets) (#15929) 2019-12-24 00:03:08 -06:00
Scott Lahteine
af4c62b422 Update product links 2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444 Update AZSMZ LCD link (#16106) 2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962 Vendor version override (#14189)
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509)
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d Configurable TOUCH_BUTTONS repeat delays (#15245) 2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886 Tweak NOZZLE_CLEAN_START_POINT spacing 2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4 Tweak REPRAPWORLD_KEYPAD config comment 2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6 Bring Configuration.h up to date 2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen (#15057) 2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese (#13892) 2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b Adding HMS434 machine (#14931) 2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5 Fix #define typo in configs 2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25 Overlord printer thermistor (#14815) 2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630 HAL cleanup, Teensy 3.1 platform 2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57 Option to reverse select direction/buttons (#14693) 2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd More general FSMC display option 2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f More general TOUCH_BUTTONS comment 2019-07-30 04:22:27 -05:00
mikeshub
1579091c20 PID loop improvements (#14746)
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f Improve magnetic dock switching toolhead (#14663) 2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47 Robin & Longer3D SPI TFT driver (#14595) 2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f Shorten some config descriptions 2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17 OLED LCD section 2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638 RPW-Ultra thermistor table (#14517) 2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488)
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b Add links to Junction Deviation heading (#14272) 2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3 Touch-MI Menu and Manual Deploy option (#14290) 2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f Add temperature-based auto power options (#14397) 2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101)
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131)
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671)
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706)
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
InsanityAutomation
367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Ludy
a7b3a61424 Improve some config comments readability (#12615) 2018-12-09 19:02:42 -06:00
Scott Lahteine
4388015f1a Tweak config formatting 2018-12-07 16:57:14 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Scott Lahteine
9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132)
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090)
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069)
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
2018-10-16 07:28:52 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984)
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Scott Lahteine
66966dbd69 Tweak comments for newer multiplexer 2018-08-25 17:00:49 -05:00
Kevin
6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Scott Lahteine
bd6d032628 Update default driver configuration
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Giuliano
bd3ec66a78 [2.0.x] typo fix (#11365)
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
14e2b11195 Fix spelling in configs 2018-07-24 21:03:38 -05:00
Scott Lahteine
2106fa26b1 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:49:20 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Chris Pepper
cbea385ed7 [2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198)
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
568cfe7caa Add thermistor 501 (100K Zonestar) 2018-07-03 17:52:06 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
Scott Lahteine
aaaf09bda2 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:33:51 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter (#10796) 2018-05-21 15:51:38 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it (#10748) 2018-05-14 21:38:24 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type (#10630) 2018-05-06 19:16:55 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
b7e938a9fb LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 07:13:56 -05:00
Scott Lahteine
c87b0e21be Add units to probe speed comments 2018-04-30 23:50:28 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 2018-04-22 02:50:48 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 2018-04-21 15:43:21 -05:00
KangDroid
6c535081ec [2.0.x] Add optional menu item to toggle software endstops (#10389) 2018-04-13 00:24:09 -05:00
Yunhui Fu
c96412a78f [2.0.x] UTF-8 language translation support (#10213) 2018-04-12 20:14:01 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
dca69efc11 Update Bed PID comments 2018-04-08 06:44:47 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
c6ff39cc14 Spacing cleanup 2018-03-17 16:49:08 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058)
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
419d12ca1b Add UNKNOWN_Z_NO_RAISE option
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
Scott Lahteine
a2a672449a Updated boot screen description 2018-03-03 20:04:17 -06:00
Scott Lahteine
4953fb1c88 Standardize encoder defaults 2018-02-24 22:34:45 -06:00
Scott Lahteine
5684beae90 Bring some configs up to speed 2018-02-24 21:56:27 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language (#9786)
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00