Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
c4cbc54484
Suppress a compile warning
2020-02-01 10:38:07 -06:00
Acenotass
832d33ce9d
Update Russian language ( #16750 )
2020-02-01 04:53:18 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Acenotass
0a6ae664bd
Update Russian language ( #16745 )
2020-01-31 21:43:44 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Alexander Gavrilenko
c45d6b2017
Simultaneous use of rotary encoder and touch buttons ( #16729 )
2020-01-30 12:29:30 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Jason Smith
131acf304b
Fix Manual Bed Leveling with multiple extruders ( #16688 )
2020-01-27 15:57:21 -06:00
Scott Lahteine
5e3e8fcdb9
Fix PID F menu label
2020-01-26 17:07:18 -06:00
Giuliano Zaro
81f31efaee
Fix Spanish (swapped BLTouch strings) ( #16637 )
2020-01-26 03:34:58 -06:00
Roman Moravčík
3572fa22a0
Update Slovak language ( #16646 )
2020-01-26 03:27:08 -06:00
Scott Lahteine
bbfbcb8a5d
Clean up PID language defines
2020-01-26 03:24:54 -06:00
Jason Smith
95d5a0c480
Fix DELTA_CALIBRATION_MENU recursive call ( #16656 )
2020-01-26 00:02:06 -06:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
Scott Lahteine
1c042bbaea
Convert chars only for enabled languages
2020-01-24 15:12:04 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
d9cdb4ae19
Move steps/mm out of slim menus ( #16603 )
2020-01-20 00:43:19 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
0r31
f36f084465
Fix Greek language string ( #16601 )
2020-01-19 23:03:19 -06:00
ellensp
5bd66241df
Fix TOUCH_UI_FTDI_EVE bugs ( #16540 )
2020-01-16 05:50:00 -06:00
InsanityAutomation
ffd8b595d1
Fix PLR cancel with ExtUI ( #16556 )
2020-01-13 20:52:24 -06:00
Scott Lahteine
1457e40208
Make lcd_power_loss_recovery_cancel exportable
2020-01-13 20:25:12 -06:00
Bob Kuhn
c4ffe74d71
Add SERVO, TONE timers to variant for better STEVAL_3DP001V1 support ( #16538 )
2020-01-13 00:26:17 -06:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Giuliano Zaro
e9a97127f7
Update Italian language ( #16527 )
2020-01-10 16:19:52 -06:00
Acenotass
2d820e6204
Update Russian language ( #16522 )
2020-01-10 13:06:02 -06:00
Tanguy Pruvot
f9f7697b96
Fix Probe Offset XY edit items (et Français) ( #16523 )
2020-01-10 13:04:59 -06:00
InsanityAutomation
409d7378d9
Add Probe Offsets menu ( #16444 )
2020-01-10 00:47:38 -06:00
thisiskeithb
5beca89412
Add menu item Tune > Advance K ( #16488 )
2020-01-08 17:43:36 -06:00
Alejandro Aguilera
5a5e1d0401
Fix Change Filament menu item with runout ( #16485 )
2020-01-08 16:03:23 -06:00
Tanguy Pruvot
d1e55a2d1d
Remove extra UBL map edit menu item ( #16451 )
2020-01-05 02:25:03 -06:00
Tanguy Pruvot
bdcccee203
Improve French language (UBL) ( #16453 )
2020-01-05 02:09:27 -06:00
Justin
d70dad6807
Fix permyriad progress bar ( #16460 )
2020-01-05 02:08:24 -06:00
Acenotass
93e35880ce
Update Russian language ( #16461 )
2020-01-05 02:04:28 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Vertabreaker
b841b9bd01
Add example configs. Expand custom menu. ( #16286 )
...
- Anet E10
- Geeetech D200
- Geeetech M201
- JGAurora Magic
- MakerFarm Pegasus 12
2020-01-03 20:37:22 -06:00
Scott Lahteine
aa4db785f2
MSG_WATCH => MSG_INFO_SCREEN
2020-01-03 19:50:55 -06:00
Tanguy Pruvot
cda363a15e
Touch UI: Fix UBL mesh value editing ( #16432 )
2020-01-02 21:26:03 -06:00
InsanityAutomation
d129ac1b37
Z-offset edit precision based on value limits ( #16425 )
2020-01-02 20:40:40 -06:00
Acenotass
5ffabd56eb
Update Russian language ( #16426 )
2020-01-02 20:17:08 -06:00
Dirk O. Kaar
d0e1166cce
Fix Visual Micro "Arduino IDE for Visual Studio" support ( #16418 )
2020-01-02 19:01:38 -06:00
Scott Lahteine
5b75a018b7
Misc patches preceding DGUS PR
2020-01-02 17:59:38 -06:00
randellhodges
c75b560604
PWM pin not needed for Neopixel brightness / submenu ( #16345 )
2020-01-02 17:50:19 -06:00
Jason Smith
92ad973729
Fix some DOGM warnings ( #16363 )
2020-01-01 21:58:16 -06:00
Alexander Gavrilenko
c6f7ea9f22
MKS Robin ILI9328 TFT support ( #16401 )
2020-01-01 20:55:37 -06:00
Scott Lahteine
832321f55d
Fix games menu back item, titles
2019-12-31 16:06:16 -06:00
petrzjunior
254d352fca
Update Czech language ( #16305 )
2019-12-23 18:14:51 -06:00
Luc
24eaf2d7e0
Some ESP32 patches ( #16297 )
2019-12-22 16:11:17 -06:00
randellhodges
f4196d394b
Flash leveling (for some STM32) ( #16174 )
2019-12-22 16:04:09 -06:00
Scott Lahteine
10f7bbee32
Use MYSERIAL0 (not SerialUSB) for Malyan LCD
2019-12-19 19:53:06 -06:00
Scott Lahteine
6a514a1e8e
Move status screen defines
2019-12-12 22:20:03 -06:00
InsanityAutomation
7b512742f4
Tweak ExtUI Probeless Babystepping ( #16177 )
2019-12-12 15:51:56 -06:00
MS1987
31fdaea269
Add MKS Robin Pro, MKS Robin Lite3 ( #16163 )
2019-12-11 00:23:47 -06:00
Scott Lahteine
0d52eaa875
Superscript 3 for mm3
2019-12-10 23:45:39 -06:00
Tanguy Pruvot
5ebef425ce
Update french (objects, retract...)
2019-12-10 23:45:39 -06:00
Giuliano Zaro
5dfa152ba2
Update Italian language ( #16147 )
2019-12-10 23:38:14 -06:00
dagorel
1c4f672eae
Formalize DAC percent strings ( #16176 )
2019-12-10 23:37:25 -06:00
Tanguy Pruvot
ab61c09bff
Improve touch buttons behavior ( #16109 )
2019-12-06 00:47:50 -06:00
Luu Lac
01e4b0c067
Add Laser / Spindle bitmap for LCD ( #16068 )
2019-12-01 21:20:15 -06:00
Scott Lahteine
3dc49fd1c6
Split up hotend / bed drawing
2019-12-01 20:52:59 -06:00
InsanityAutomation
7126a5e5a7
Add Host Prompt Notification Method ( #15942 )
2019-12-01 17:39:28 -06:00
InsanityAutomation
b24b0f385f
Add ExtUI Flow Rate method ( #16048 )
2019-11-30 07:23:53 -06:00
Scott Lahteine
f83bc0aa13
Optimize common strings
...
Saves 128 bytes in testing with `mftest mega 1 -y`
2019-11-29 22:54:42 -06:00
Bob
0f2ee414db
Update thermistornames.h ( #16027 )
2019-11-29 02:06:11 -06:00
timeburn
a5a143f944
Include host_actions.h in G34 ( #16014 )
2019-11-26 16:38:41 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
Marcio T
43d0391d82
Fix Touch UI message strings ( #16004 )
2019-11-26 02:56:25 -06:00
Robby Candra
fc9f8d27eb
Fix Progress / Remaining display on DOGM ( #16005 )
2019-11-26 02:55:22 -06:00
Scott Lahteine
1d150e41b6
Reduce MMU2 code, add test
2019-11-26 02:15:31 -06:00
Robby Candra
55595d444d
Use LCD_WIDTH for indexed string ( #15979 )
2019-11-24 19:06:23 -06:00
Jason Smith
c497a491f4
Fix a PID_EXTRUSION_SCALING menu item ( #15988 )
2019-11-24 17:01:14 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press ( #15986 )
2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Jason Smith
b904ba0f29
Improve Delta probing / calibration ( #15887 )
2019-11-21 03:26:00 -06:00
Roman Moravčík
5681017d0c
Update Slovak language ( #15953 )
2019-11-20 17:41:14 -06:00
Scott Lahteine
ab9f0f2c4f
Followup to meshCount patch
2019-11-20 04:57:04 -06:00
InsanityAutomation
e81b946f06
Better singlenozzle stored fan speed menus ( #15921 )
2019-11-20 00:14:56 -06:00
Giuliano Zaro
31e329f143
Update Italian language ( #15925 )
2019-11-19 23:27:53 -06:00
Giuliano Zaro
aa89bb71f9
Fix MMU2 compile error ( #15923 )
2019-11-19 23:22:02 -06:00
InsanityAutomation
4d4e692c81
Match onMeshUpdate() index sign ( #15920 )
2019-11-19 23:16:43 -06:00
Luu Lac
4d9a5fef3b
Update Vietnamese language ( #15940 )
2019-11-19 21:08:47 -06:00
Robby Candra
40bbe58371
Use lcd_uint_t in lcd_put_u8str_ind_P ( #15909 )
2019-11-16 16:37:21 -06:00
Scott Lahteine
27cb4db80e
Reduced string storage using tokens ( #15593 )
2019-11-14 20:30:30 -06:00
Scott Lahteine
602ca5dea6
No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY
2019-11-13 02:07:17 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20
Touch UI fixes for Cocoa Press ( #15847 )
2019-11-10 18:49:41 -06:00
Jason Smith
b3f81eead5
Fix/improve TURBO_BACK_MENU_ITEM ( #15856 )
2019-11-09 19:27:30 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro ( #15829 )
2019-11-09 17:59:04 -06:00
Scott Lahteine
8061836e74
Fix Lulzbot tag 30: "Heaters Off"
2019-11-08 03:57:34 -06:00
Luu Lac
ed6bbe012b
Fix incomplete 'Homing XYZ' screen draw ( #15830 )
2019-11-07 19:14:02 -06:00
AnHardt
4db68d704f
Update Display Throttling ( #15837 )
2019-11-07 19:04:19 -06:00
Scott Lahteine
0be9fdb455
Move single-use to lambdas
2019-11-07 00:28:33 -06:00
Scott Lahteine
84ce3a6bea
LCD corner screen handler lambda
2019-11-07 00:24:16 -06:00
LinFor
a84e3d1b80
Use native ADC resolution where possible ( #15719 )
2019-11-06 17:49:17 -06:00
Axel
786617e375
Fix RAMPS + VIKI i2c ( #15811 )
2019-11-06 16:52:28 -06:00
Scott Lahteine
e6dfc991ae
Patch tabs, heater led tests
2019-11-06 16:28:36 -06:00
Luu Lac
4ee3502c8f
Fix "confused intellisense" ( #15817 )
2019-11-06 15:54:09 -06:00
Scott Lahteine
f5b5b9e8ec
Bring filament menu up to speed
2019-11-05 17:16:12 -06:00
Scott Lahteine
e9805a0bcb
Go to previous menu on object cancel
2019-11-04 16:13:10 -06:00
Scott Lahteine
51fd226a4d
Unconfuse intellisense
2019-11-04 15:40:56 -06:00
Scott Lahteine
15f94e5ee5
Add NUL_STR global
2019-11-02 07:31:07 -05:00
Scott Lahteine
ea3217cd46
Move 'draw' methods into Menu Item classes ( #15760 )
2019-11-02 07:28:20 -05:00
Robby Candra
7360e9343a
Minor DOGM status screen fix ( #15746 )
2019-11-02 07:04:31 -05:00
Robby Candra
bdb452ed81
Fix missing % on DOGM Status Screen ( #15748 )
2019-11-02 07:01:50 -05:00
Scott Lahteine
ca6d00b862
Save some string flash
2019-11-02 00:48:05 -05:00
Scott Lahteine
23d21dd81c
Tweak lambdas
2019-11-02 00:05:23 -05:00
Scott Lahteine
d5c1c72a76
Tweak CW/CCW bitmaps
2019-10-29 16:53:07 -05:00
Scott Lahteine
aaf018e5a0
Language changes
2019-10-29 16:20:35 -05:00
studiodyne
319e2b5760
Fan menus fix. FR cosmetic change. ( #15714 )
2019-10-28 16:49:31 -05:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
Scott Lahteine
ade76e53de
Fix A10M/A20M mixer display
...
Co-Authored-By: 3Dangel <3dangel@users.noreply.github.com>
2019-10-28 16:26:54 -05:00
Scott Lahteine
9aff30da0c
Confirm object cancellation ( #15660 )
2019-10-27 19:50:21 -05:00
Scott Lahteine
78899fc241
Followup to E Total
2019-10-27 18:40:33 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
9720d21301
Clean up trailing whitespace
2019-10-27 15:32:29 -05:00
Giuliano Zaro
6fd13879ae
Update Italian language ( #15676 )
2019-10-26 12:54:59 -05:00
Scott Lahteine
600429a067
Cancel Objects followup
2019-10-25 20:08:45 -05:00
Evgeny Zyatkov
12a244f24f
Fix #endif typo ( #15661 )
2019-10-25 12:27:23 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
464d98d178
Short time prefixes, no percent prefix
2019-10-24 14:00:32 -05:00
Scott Lahteine
ff4301a422
Update status_screen_DOGM.cpp
2019-10-24 13:42:02 -05:00
Scott Lahteine
326d5b84e7
Update status_screen_DOGM.cpp
2019-10-24 13:39:32 -05:00
Scott Lahteine
5edd5d1e1f
Clean up
2019-10-24 13:38:39 -05:00
Luu Lac
efeb6efe77
Set pullup on BTN_BACK pin ( #15654 )
2019-10-24 12:04:45 -05:00
Scott Lahteine
af214ff121
Fix up PSU_CONTROL checks
2019-10-22 16:16:12 -05:00
Robby Candra
2c42526763
FIx Estimation String Pos
2019-10-22 10:02:27 +07:00
Robby Candra
d64ab63026
Fix Estimation String Macro
2019-10-22 08:16:29 +07:00
Scott Lahteine
f00b48f9a8
Expand encoder value range
2019-10-21 18:56:24 -05:00
Robby Candra
52a8bbefcf
Make sure estimate time = 0 not displayed
2019-10-20 23:44:05 +07:00
Robby Candra
6241bcf0c8
Fix Progress at the end of print.
2019-10-20 06:06:48 +07:00
Robby Candra
9b88c3e79b
DOGM Progress Display, option to disable display rotation
2019-10-17 05:26:09 +07:00
Antti Andreimann
40de135d4d
Fix CUSTOM_USER_MENU_TITLE non-translated string ( #15575 )
2019-10-16 13:53:12 -05:00
Francois Rainville
dd0c5de4c7
Provide LONG_FILENAME_LENGTH for headers ( #15582 )
2019-10-16 13:51:18 -05:00
Robby Candra
7af99d03d3
Don't show prefix if no elapsed time
2019-10-16 16:25:52 +07:00
Robby Candra
bf850827f7
Fix Progress Display
2019-10-16 16:18:20 +07:00
Scott Lahteine
b7b303f4bf
Spindle/Laser power in planner blocks ( #14437 )
2019-10-15 16:10:20 -05:00
Jason Smith
53abfdc2c3
Fix BLTOUCH and FAN PWM conflicts on SKR E3 boards ( #15547 )
2019-10-15 14:18:46 -05:00
Slawomir Ciunczyk
8668571bee
Update Polish language ( #15569 )
2019-10-15 13:36:17 -05:00
Slawomir Ciunczyk
99f983d066
Update Polish language ( #15541 )
2019-10-15 12:34:18 -05:00
Scott Lahteine
7622973a31
Fix elapsed time overflow warning
2019-10-15 11:47:24 -05:00
Tanguy Pruvot
a988f9304d
reduce the required size with uint16_t modifiers
2019-10-14 20:11:59 +02:00
Tanguy Pruvot
21867c7fef
elapsed time overflow warning fix
...
tried to fix it with snprintf in libs/duration_t.h but its worst... :/
2019-10-14 20:00:59 +02:00
sL1pKn07
d37bd33c31
Update Spanish Translation
2019-10-14 16:02:54 +02:00
Roman Moravčík
b4f82d1081
Update Slovak language ( #15527 )
2019-10-13 17:35:38 -05:00
Tanguy Pruvot
ee20f21a24
Fix undefined max in multi-language ( #15521 )
2019-10-13 18:31:28 -04:00
Giuliano Zaro
7714152013
Update Italian language ( #15533 )
2019-10-13 17:28:03 -05:00
Krystian Booker
62aa137548
Fixed pid_autotune_menu made pid_label accessible ( #15551 )
2019-10-13 16:46:06 -05:00
Roxy-3D
37550e9d98
Allow 3-digit LCD Display of value
...
The LCD Display shows 3 digits of precision, not 4.
So change the bounding value to something more rational.
2019-10-13 14:34:51 -05:00
Roxy-3D
05eed72b69
Allow LCD Menu to adjust Junction Deviation lower
...
Allow LCD Menu to adjust Junction Deviation lower than .01. Some machines currently have a JUNCTION_DEVIATION_MM value as low as .005 mm. In the case of non-Linear-Advance machines... The upper limit is raised to .5 mm.
Probably more thought needs to be given to the Linear Advance case. It maybe it doesn't need a special case and should just use the same bounds as the non-Linear Advance case.
2019-10-12 17:36:43 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Robby Candra
6f60838736
Fix PAUSE_MODE_CHANGE_FILAMENT menu item ( #15501 )
2019-10-10 19:39:32 -05:00
Scott Lahteine
3664beec29
Don't refresh on status line changes
2019-10-10 19:29:17 -05:00
ANMay-ru
b119c14017
Clean up LCD print, align ( #15498 )
2019-10-09 20:41:44 -05:00
Marcio Teixeira
6a865a6146
Multi-language support ( #15453 )
2019-10-09 19:46:10 -05:00
Marcio Teixeira
dc14d4a13c
Improvements and fixes to Lulzbot UI ( #15490 )
2019-10-09 19:44:49 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
5becda25c5
Followup to E renumbering
2019-10-08 17:37:17 -05:00
Scott Lahteine
cb1cb72c76
Fix Move Z menu item
2019-10-08 17:24:40 -05:00
LinFor
58f81f8e7e
Followup to progress override ( #15488 )
2019-10-08 15:24:14 -05:00
Scott Lahteine
cc822c1a05
Use lambdas in menus, where possible ( #15452 )
2019-10-07 19:44:33 -05:00
LinFor
19b7be067c
Allow M73 to override SD position ( #15449 )
2019-10-07 16:38:58 -05:00
InsanityAutomation
71526fa5ce
Fix ExtUI onMeshUpdate event ( #15477 )
2019-10-07 15:39:52 -05:00
Scott Lahteine
211ff67440
Patch blocking and manual moves
2019-10-06 23:58:19 -05:00
Scott Lahteine
9188ce1a8d
Add JOIN for simple append
2019-10-06 22:01:06 -05:00
Scott Lahteine
51ae13fc8c
Compact MIN/MAXTEMP_ALL
2019-10-06 21:58:58 -05:00
Scott Lahteine
5449088a8e
Fix Japanese language extra define
2019-10-06 21:58:58 -05:00
Me No Dev
fc6a0937b8
Improve Malyan M200 integration ( #15462 )
2019-10-05 22:37:22 -05:00
Scott Lahteine
f8498d8a52
GET_TEXTF => GET_TEXT_F
2019-10-05 20:47:28 -05:00
Jimmy Page
203d260a41
Update Japanese font and translation ( #15470 )
2019-10-05 20:35:20 -05:00
Giuliano Zaro
a3ec573984
Uniform fan speed & case light
2019-10-05 18:34:11 -05:00
Giuliano Zaro
ff55601dc3
Update Italian language
2019-10-05 18:30:48 -05:00
Roman Moravčík
b90dff020e
Update Slovak language
2019-10-05 18:29:17 -05:00
Luu Lac
5d81d7cefe
if no HOTENDS
2019-10-04 16:18:18 -05:00
Scott Lahteine
c83c2a5022
Patch compile glitches
2019-10-03 15:37:13 -05:00
Scott Lahteine
6b945eb548
Show "FILAMENT CHANGE" during filament change
2019-10-03 07:45:52 -05:00
Scott Lahteine
72d791a736
Standardize active/paused functions
2019-10-03 06:27:30 -05:00
Scott Lahteine
719615a6b6
Simplify edit menu items
...
The `edit` part of menu items displaying values is not needed. Menu edit types can be modeled on sub-menus.
2019-10-03 06:27:30 -05:00
Scott Lahteine
273cbe931e
Aliases for common menu item types
2019-10-03 06:15:21 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
Scott Lahteine
7cd72de8bc
General cleanup, style
2019-09-30 22:57:23 -05:00
Scott Lahteine
806d64e1bf
X_SENSORLESS includes AXIS_HAS_STALLGUARD
2019-09-30 22:56:22 -05:00
Scott Lahteine
e3fd0519b3
Reduce need for UNUSED
2019-09-30 22:56:22 -05:00
Marcio Teixeira
e3ff27c95a
Prevent duplication of PSTRs to save memory ( #15435 )
2019-09-30 22:53:34 -05:00
Marcio Teixeira
087fe0e9d6
Improve and fix LULZBOT_TOUCH_UI ( #15434 )
...
- Add start print confirmation dialog box
- Fix incorrect text colors in UI
- Adjust bio printer UI
2019-09-30 22:15:48 -05:00
Giuliano Zaro
15efe8d839
Update Italian language ( #15436 )
2019-09-30 19:31:06 -05:00
DrDitto
55b8547f04
Simplify MKS_MINI_12864 init (move 5ms to u8g seq.) ( #15428 )
2019-09-30 02:11:58 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Tim Moore
7e72768433
Info Menu: Runaway Watch state ( #14827 )
2019-09-28 21:53:40 -05:00
Ludy
a628d77798
Fix compile error with 6 hot-ends ( #15405 )
2019-09-28 15:30:41 -05:00
Ludy
6509dc04f5
Fix German error ( #15404 )
2019-09-28 15:29:41 -05:00
Scott Lahteine
2277c6dffc
Optimize SD card reader, sorting ( #15395 )
2019-09-28 15:28:05 -05:00
InsanityAutomation
5221e2d991
Restore Host Prompt Info ( #15387 )
2019-09-27 17:06:26 -05:00
Giuliano Zaro
a8aca59c04
Update Italian language ( #15373 )
2019-09-27 13:05:53 -05:00
Scott Lahteine
4c16661153
Use named styles in draw_menu_item_static
2019-09-27 04:45:01 -05:00
Scott Lahteine
d683f98019
Return buffer in duration.toString
2019-09-27 04:45:01 -05:00
Scott Lahteine
dc65788511
Shorthand for __VA_ARGS__
2019-09-27 04:43:34 -05:00
Marcio Teixeira
a18d16fb8b
Do not implicitly concatenate localized strings ( #15383 )
2019-09-27 04:38:43 -05:00
Scott Lahteine
665e45e0ba
Reduce string storage, use masking 'seen'
2019-09-26 04:30:55 -05:00
Scott Lahteine
455dabb183
Add a feedRate_t data type ( #15349 )
2019-09-26 01:28:09 -05:00
Scott Lahteine
b2e1f77f58
Fix extraneous "Home XYZ First" message
2019-09-25 21:57:20 -05:00
Marcio Teixeira
8cbb5350ad
Refactor joystick support in ExtUI ( #15318 )
2019-09-25 18:46:36 -05:00
DrDitto
04e4eb35be
MKS_MINI, FYSETC RGB, backlight ( #15334 )
2019-09-25 18:41:04 -05:00
Scott Lahteine
ddd9d9032a
Fix option / string name conflict
2019-09-25 17:12:13 -05:00
Marcio Teixeira
149e9b733e
Simplified ExtUI language selection ( #15359 )
2019-09-25 01:25:21 -05:00
Scott Lahteine
4e8d9fe59b
zprobe_offset => probe_offset
2019-09-24 23:36:09 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Scott Lahteine
ebc9a8a0b0
ExtUI patch followup
2019-09-24 20:21:31 -05:00
Marcio Teixeira
4ff59d178d
LULZBOT_TOUCH_UI extended character set ( #15301 )
2019-09-24 18:49:40 -05:00
Marcio Teixeira
bafcd084cc
LULZBOT_TOUCH_UI performance/cosmetic fixes ( #15319 )
2019-09-24 17:46:00 -05:00
Marcio Teixeira
7f117bfc60
EXTENSIBLE_UI Joystick support ( #15303 )
2019-09-18 19:35:03 -05:00
Scott Lahteine
c44b5fd13a
Try to fit logo by narrowing icons
2019-09-18 16:43:30 -05:00
Scott Lahteine
712aaa26d5
Use provided 'constrain'
2019-09-18 04:07:14 -05:00
Robby Candra
787d522036
LCD Size Defines ( #15297 )
2019-09-18 02:58:58 -05:00
Marcio Teixeira
b590ae4875
LULZBOT_TOUCH_UI: Only use %S on AVR ( #15292 )
2019-09-18 02:33:26 -05:00
Scott Lahteine
b73744f9e7
Update ExtUI, add test under DUE ( #15298 )
2019-09-17 23:41:34 -05:00
Scott Lahteine
73ac213cdd
Fix FileList::isAtRootDir
2019-09-17 23:34:14 -05:00
Scott Lahteine
c353eaa146
Misc changes from struct refactor ( #15289 )
2019-09-17 18:16:28 -05:00
Tanguy Pruvot
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
Scott Lahteine
f01f0d1956
Drop C-style 'void' argument
2019-09-16 20:31:21 -05:00
Scott Lahteine
7d8c38693f
Formatting
2019-09-16 20:31:21 -05:00
Marcio Teixeira
4c00ddae56
Remove obsolete LULZBOT_TOUCH_UI code ( #15284 )
2019-09-16 19:45:05 -05:00
Robby Candra
98233b1de0
Add root flag to CardReader ( #15275 )
2019-09-16 17:49:55 -05:00
Marcio Teixeira
7a569ad4d0
LULZBOT_TOUCH_UI fixes. Fix some warnings. ( #15276 )
2019-09-16 16:49:46 -05:00
Scott Lahteine
d5f5203880
Use "mount" as card verb
2019-09-15 03:12:44 -05:00
Scott Lahteine
79635f8e94
Fix some debug out lines
2019-09-14 16:45:06 -05:00
Marcio Teixeira
18821f29d5
LULZBOT_TOUCH_UI: Localization, runtime language selection ( #15249 )
2019-09-14 06:51:49 -05:00
Tanguy Pruvot
15bea5043c
Followup to SD menu optimization ( #15252 )
2019-09-14 06:42:28 -05:00
Scott Lahteine
465c6d9230
Simpler Allen Key config. Fixes, cleanups from refactor ( #15256 )
2019-09-14 03:05:10 -05:00
Frederik Kemner
3348a7d223
Fix Info Menu with EXTRUDERS==0 ( #15230 )
2019-09-13 01:36:44 -05:00
Robby Candra
3f129b6574
Touch Buttons variable repeat delay ( #15236 )
2019-09-12 22:14:24 -05:00
Robby Candra
1ab3521351
Optimize Media Menu display/scrolling ( #15233 )
2019-09-12 18:06:07 -05:00
Tanguy Pruvot
3eacc3bfce
french update, g26, usb ( #15229 )
...
french update for G26 and USB.
2019-09-11 14:36:39 -05:00
Gustavo Alvarez
2b628553d3
Update Spanish language ( #15189 )
2019-09-11 12:14:10 -05:00
Scott Lahteine
e3278f22f3
General formatting
2019-09-11 03:29:00 -05:00
Marcio Teixeira
47d19bab40
Lulzbot ExtUI Western language support ( #15208 )
...
Fix #15134
2019-09-10 20:07:03 -05:00
Scott Lahteine
75927e17dd
Filament Width Sensor singleton ( #15191 )
2019-09-10 18:48:58 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes ( #15213 )
2019-09-10 02:20:49 -05:00
Scott Lahteine
841c8ce0d9
Remove PROMPT_INFO / PROMPT_GCODE_INFO ( #15210 )
2019-09-09 15:43:06 -05:00
Ludy
3c3a956a17
Fix compiling error BIGTREE_SKR_MINI ( #15197 )
...
Let's get STM32F1 working again!
2019-09-09 10:34:54 -05:00
Scott Lahteine
565a0e11ed
Prevent 'current' name conflict, if needed
2019-09-09 03:17:11 -05:00
Scott Lahteine
dbea6f0022
STM32F1 USB cdc/msc composite device ( #15180 )
...
Co-Authored-By: bigtreetech <38851044+bigtreetech@users.noreply.github.com>
2019-09-08 02:28:22 -05:00
Luu Lac
8bca3fcf2c
Display chamber with HAS_TEMP_CHAMBER ( #15194 )
2019-09-08 02:20:18 -05:00
Roman Moravčík
ca0f47985b
Update Slovak language ( #15187 )
2019-09-08 01:47:36 -05:00
Ludy
068c303742
More translatable LCD strings ( #15190 )
2019-09-08 00:15:25 -05:00
Ludy
6172cd2528
CHAMBER integration to GLCD ( #14981 )
2019-09-07 04:52:57 -05:00
Scott Lahteine
72876d9045
Clean up u8g defines
2019-09-05 17:09:24 -05:00
Tanguy Pruvot
50e1bf57b9
Fix RRD/CR10 LCD on STM32F1/F4 ( #15172 )
2019-09-05 13:20:03 -05:00
Scott Lahteine
060b360be3
Provide a good default contrast
...
In reference to #15139
2019-09-04 18:29:22 -05:00
Ludy
beffcd856b
Update German language, (c) ( #15164 )
2019-09-04 16:59:26 -05:00
Scott Lahteine
2d2d9da9f2
Tweak u8g impl file includes
2019-09-04 14:52:22 -05:00
Scott Lahteine
a07c4af393
Tweak animated draw call
2019-09-04 14:47:08 -05:00
Scott Lahteine
7ad5208267
Fix up boot screen code
...
Followup to #15125
Co-Authored-By: Ludy <ludy87@users.noreply.github.com>
2019-09-04 14:43:32 -05:00
Robby Candra
6b05d5d65d
Allow TOUCH_BUTTONS to be swapped ( #15100 )
2019-09-04 13:13:05 -05:00
George Fu
8e044ea898
Fix up Fysetc configs, pins. Fix menu type float5. ( #15157 )
2019-09-04 13:06:23 -05:00
Giuliano Zaro
12c595c61f
SAMD51 LCD support ( #15113 )
2019-09-02 05:45:02 -05:00
Scott Lahteine
23bb40d0ea
Fix MKS_MINI_12864 init
...
See #13550
Co-Authored-By: DrDitto <drditto@users.noreply.github.com>
2019-09-02 05:24:36 -05:00
Tanguy Pruvot
c9817105fb
Update French language ( #15129 )
2019-09-02 02:40:33 -05:00
Giuliano Zaro
e6a114b853
Update Italian language ( #15130 )
2019-09-02 02:39:40 -05:00
Gustavo Alvarez
54069823a0
Update Spanish language ( #15132 )
2019-09-02 02:36:32 -05:00
Scott Lahteine
34b73426e5
Apply #ifdef/#ifndef where possible
2019-09-01 23:54:50 -05:00
Scott Lahteine
4078f2672e
Apply shorthand option macros
2019-09-01 23:43:48 -05:00
Scott Lahteine
586b334c2a
Split up stepper indirection ( #15111 )
2019-08-31 19:44:45 -05:00
Scott Lahteine
66f1da762f
Use 'ui.' where possible
2019-08-31 01:07:01 -05:00
Robby Candra
26fa08548c
Add RGB565 Color Definitions for TFT ( #15099 )
2019-08-30 22:49:24 -05:00
Scott Lahteine
1eeef30097
A single generate_click lambda
2019-08-30 19:17:59 -05:00
Scott Lahteine
d25231aea8
Spacing, defined(), #include tweaks
2019-08-29 18:06:24 -05:00
Ludy
3f77d6a551
Fix expire_status warning ( #15094 )
2019-08-29 16:05:22 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Tanguy Pruvot
ca5da026d6
dogm: u8g prototypes cleanup ( #15082 )
2019-08-28 23:49:51 -05:00
Scott Lahteine
1d8ad7cf71
Safe changes from HAL cleanup
2019-08-28 21:21:47 -05:00
Scott Lahteine
95963121b0
Patch a u8g include
2019-08-28 20:09:02 -05:00
Scott Lahteine
7b99c26e80
Fix FTDI_EVE_LIB platform includes
2019-08-28 19:56:02 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen ( #15057 )
2019-08-28 07:40:18 -05:00
Scott Lahteine
b8e4b993d6
Separate board website URL
2019-08-28 04:44:40 -05:00
Scott Lahteine
6341aefda3
Info menu tweak style
2019-08-28 04:43:42 -05:00
Marcio Teixeira
0f386d06a1
Followup fixes to ExtUI ( #15068 )
2019-08-28 04:23:13 -05:00
Robby Candra
ca084dcfe8
Switch col vs row variable name ( #15072 )
2019-08-28 02:49:21 -05:00
Giuliano Zaro
604bdf0b43
Update Italian language ( #15076 )
2019-08-28 02:46:21 -05:00
InsanityAutomation
f218405c36
Fix ExtUI invalid speed, timer ( #15031 )
2019-08-25 04:46:02 -05:00
Tim Moore
8033bc87ea
Turbo-back Info menu items ( #15049 )
2019-08-24 19:50:04 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese ( #13892 )
2019-08-24 03:40:28 -05:00
Scott Lahteine
750256948e
Apply #ifdef
2019-08-24 01:42:48 -05:00
Tim Moore
efeea9bccf
pca9632_buzz fix ( #15020 )
2019-08-23 22:30:11 -05:00
Marcio Teixeira
e61e54acfd
Fix TURBO_BACK_MENU_ITEM compile error ( #15019 )
2019-08-23 22:29:00 -05:00
Tanguy Pruvot
0a280f00c2
Flag unused variables without buzzer ( #15016 )
2019-08-23 22:21:30 -05:00
Scott Lahteine
f2ad1ceb13
Update PT-BR
2019-08-23 21:13:14 -05:00
Scott Lahteine
7924e0d819
Add print at position shortcuts
2019-08-22 19:37:04 -05:00
Scott Lahteine
5c0e5c599f
Fix boot screen warning
2019-08-22 18:58:11 -05:00
Marcio Teixeira
bd1ced14e7
LulzBot Touch UI Followup ( #15007 )
2019-08-21 04:48:05 -05:00
Marcio Teixeira
69641f1420
Fix incompatible types error ( #15009 )
2019-08-21 04:15:37 -05:00
Marcio Teixeira
825c2c3dc4
Fix fan speed encoder scaling ( #15010 )
2019-08-21 03:49:43 -05:00
Scott Lahteine
5e777601f3
Add TURBO_BACK_MENU_ITEM option ( #14991 )
2019-08-20 19:37:03 -05:00
Scott Lahteine
0cc524b84f
Prevent BOARD_NAME conflict with env
2019-08-20 19:10:36 -05:00
InsanityAutomation
5a7c0216f7
Misc. ExtUI fixes ( #14971 )
2019-08-20 03:44:17 -05:00
