a12eec33e2
Completed SORT_USES_MORE_RAM implementation
...
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:12:34 -08:00
c9486ebb85
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:12:33 -08:00
b6ffea612a
Expand on More RAM concept, address minor bugs
2014-12-13 06:10:44 -08:00
8196b36ad9
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:07:52 -08:00
cf749dbeda
Completed SORT_USES_MORE_RAM implementation
...
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:03:39 -08:00
ae081d0fe0
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
785143a013
Expand on More RAM concept, address minor bugs
2014-12-13 06:03:39 -08:00
0cbbba08bd
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
2f9ed1777d
Merge pull request #1168 from boelle/Marlin_v1
...
Adding Support for Toshiba Stepper Drivers
2014-12-03 09:32:23 -05:00
edfcf3b527
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
c429a4b3ec
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
1977b4490f
Merge pull request #1159 from thinkyhead/lcd_wait_better
...
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
7562183efc
Skip over spaces first
2014-11-28 08:09:28 -08:00
5a8b3a84ae
Merge pull request #1155 from thinkyhead/lcd_wait_better
...
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
1b7c065055
Merge pull request #1158 from elgambitero/patch-2
...
Updated a bit of spanish language
2014-11-28 10:57:50 +00:00
433ac29d31
Updated a bit of spanish language
2014-11-27 22:02:49 +01:00
662fe8288b
kill DEADJOE
2014-11-26 21:07:48 -08:00
aad336eb81
Merge branch 'lcd_wait_better' of https://github.com/thinkyhead/Marlin into lcd_wait_better
2014-11-26 21:06:13 -08:00
5874852501
get latest Marlin_v1 changes
2014-11-26 21:05:11 -08:00
12b51d6060
Ignore S and P if no value >0 is included.
2014-11-26 21:05:11 -08:00
d12b24758a
Clear LCD to welcome_msg if not printing
...
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
3f54c9ba33
Relocate click ignore code into info screen
2014-11-26 21:05:10 -08:00
92e21d3ee2
M0-M1 Enhancements
...
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
5714f64927
get latest Marlin_v1 changes
2014-11-26 21:00:02 -08:00
d407a43ac1
Ignore S and P if no value >0 is included.
2014-11-26 09:21:37 -08:00
7681711e7e
Clear LCD to welcome_msg if not printing
...
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-24 18:50:11 -08:00
aa4160ba62
Relocate click ignore code into info screen
2014-11-24 17:12:08 -08:00
cd769781a1
M0-M1 Enhancements
...
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-24 16:56:37 -08:00
90eb266139
Merge pull request #1148 from krasin/travis
...
Add Travis CI config to build Marlin firmware.
2014-11-16 08:57:31 -05:00
d078c7c29f
Add Travis CI config to build Marlin firmware.
2014-11-16 01:46:24 -05:00
3dc9e478ad
Merge pull request #1143 from Silly105/Marlin_v1
...
Changed graphic LCD info screen to match the set # of extruders
2014-11-12 17:41:36 -05:00
0d97dec434
Adaption of LCD info screen
...
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
2014-11-12 17:10:48 +01:00
4ffdbcbd4e
Merge pull request #1138 from filipmu/Marlin_v1
...
Comment out the FILAMENT_SENSOR define by default in config.
2014-11-09 20:38:30 +01:00
5c8107bcdd
Commented out FILAMENT_SENSOR #define
...
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default. Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
b014fd1ad2
Merge pull request #2 from ErikZalm/Marlin_v1
...
Sync up to Marlin
2014-11-09 07:01:57 -06:00
443b648863
Merge pull request #1133 from monkeydave/update_delta_config
...
Updated example configurations for Delta printers
2014-11-03 08:14:54 -05:00
377dfb182f
Updated example configurations for Delta printers
2014-11-02 21:04:54 +00:00
724197454c
Merge pull request #1104 from ch100/Marlin_v1
...
Fixed typo.
2014-10-11 23:10:00 +02:00
058e446531
Merge pull request #1037 from filipmu/Filament-Sensor
...
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
110c5dcf23
Fixed typo.
...
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com >
2014-10-11 00:25:36 +02:00
256c25a843
Merge pull request #1101 from MattStultz/patch-1
...
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 08:20:53 -04:00
ca30aee903
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 00:16:27 -04:00
0733825fb1
Merge pull request #1099 from Fourmi/Marlin_v1
...
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
af3e4d7510
Update line 627 ,wrong number on thermistortables
...
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
aaaf8fe8dd
Merge pull request #1068 from darkjavi/Marlin_v1
...
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
b360306881
Merge pull request #1073 from WingTangWong/wing-fix-float-delta
...
Wing fix float delta
2014-10-06 13:41:01 +02:00
ce85515428
Merge pull request #1082 from Fourmi/Marlin_v1
...
Add thermistor table
2014-10-06 13:39:36 +02:00
764921bdbf
Merge pull request #1091 from Aldert/patch-1
...
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
c40c7b589b
Merge pull request #1095 from thinkyhead/codeclean
...
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
0f2e0525df
Merge pull request #1096 from thinkyhead/set-home
...
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
