bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
15,667 Commits 1 Branch 4 Tags 151 MiB
418b3e5ee2
Commit Graph

297 Commits

Author SHA1 Message Date
LinFor
48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
InsanityAutomation
d4f5821cd6 Fix 3-point sanity check (#15696) 2019-10-28 15:46:59 -05:00
Scott Lahteine
af214ff121 Fix up PSU_CONTROL checks 2019-10-22 16:16:12 -05:00
Jason Smith
832cb7e1ac Z_STEPPER_AUTO_ALIGN — To align with Z stepper points (#15195) 2019-10-16 13:39:58 -05:00
Piotr
fe4c69b64a Poll *all* enabled endstop pins (#15525) 2019-10-15 13:28:04 -05:00
InsanityAutomation
0074d63962 Vendor version override (#14189) 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2019-10-15 12:32:44 -05:00
Marcio Teixeira
6a865a6146 Multi-language support (#15453) 2019-10-09 19:46:10 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
Scott Lahteine
1df6c7a46c Work around a compiler bug 
See #15478
 2019-10-08 19:27:03 -05:00
Scott Lahteine
519cc1bc67 NUM_AXIS is now obsolete 2019-10-06 22:18:16 -05:00
Giuliano Zaro
a1ad01e4ab Limit Case Light PWM (#15459) 2019-10-05 22:32:50 -05:00
Scott Lahteine
806d64e1bf X_SENSORLESS includes AXIS_HAS_STALLGUARD 2019-09-30 22:56:22 -05:00
Scott Lahteine
50e4545255
Add custom types for position (#15204) 2019-09-29 04:25:39 -05:00
InsanityAutomation
a6b0223eea Revive and improve DELTA probe bounds, LRFB options (#15372) 2019-09-28 01:19:11 -05:00
Scott Lahteine
dc65788511 Shorthand for __VA_ARGS__ 2019-09-27 04:43:34 -05:00
Scott Lahteine
661c3cfc99 Fix mesh bounds for MBL 2019-09-25 09:05:46 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
InsanityAutomation
6a312fae80 Add before/after dir change delays (#15314) 2019-09-19 23:05:17 -05:00
Scott Lahteine
ffb418b226 Move some SD comments 2019-09-14 02:31:47 -05:00
Robby Candra
acd76e8609 Allow odd mm bed sizes (#15258) 2019-09-14 01:26:14 -05:00
Scott Lahteine
584c86bed1
More "zero extruders" changes (#15213) 2019-09-10 02:20:49 -05:00
Luu Lac
8bca3fcf2c Display chamber with HAS_TEMP_CHAMBER (#15194) 2019-09-08 02:20:18 -05:00
Jamie
dbee0e9c54 Analog joystick jogging control (#14648) 2019-09-08 00:55:34 -05:00
thisiskeithb
cdd5056aba Increase MKS MINI 12864 default contrast (#15139) 2019-09-02 19:40:58 -05:00
AlexandrZloy
0ebaea94be Add stallGuard threshold for X2 (#15042) 2019-08-29 00:15:31 -05:00
Scott Lahteine
c7825e6719 Contrast over 63 assume 255 max 
This is closer to the prior behavior.
 2019-08-25 04:31:00 -05:00
Tim Moore
1461ee4d36 Make LCD_CONTRAST_MAX >= _LCD_CONTRAST_INIT (#15046) 2019-08-25 04:25:07 -05:00
Scott Lahteine
04a9962cb5 Fix: Contrast override in pins files 
Move contrast handling to `Conditionals_post.h` so pins files can override the LCD defaults.
 2019-08-24 00:58:05 -05:00
Tanguy Pruvot
e604f76703 Enable contrast via LCD_CONTRAST_INIT (#15006) 2019-08-21 18:56:39 -05:00
Ludy
05995d1fd6 Unify buzz methods as MarlinUI::buzz (#14803) 2019-08-20 02:01:37 -05:00
Tim Moore
4575978a1f Fix auto power for chamber fan (#14922) 2019-08-16 18:42:24 -05:00
Marcio Teixeira
179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
teemuatlut
d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
rafaljot
e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
mikeshub
1579091c20 PID loop improvements (#14746) 
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
 2019-07-28 15:50:25 -05:00
Scott Lahteine
d4be970c8b Update DOGLCD conditions 2019-07-14 13:10:13 -05:00
InsanityAutomation
f1eaed7e98 Only init servo pins used for servos (#14589) 2019-07-12 04:30:15 -05:00
gmarsh
ab99a80793 GMARSH X6 board support (#14550) 2019-07-09 00:30:08 -05:00
Scott Lahteine
1a349c7522 Add HAS_TMC220x 2019-07-08 23:07:42 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
de462f2b8a Revert "Sort out settings.load with SD EEPROM emulation (#14458)" 
This reverts commit 108d0df565.
 2019-07-03 19:11:30 -05:00
Scott Lahteine
ce2b4bc20c Conditionals tweak 2019-07-02 20:30:26 -05:00
Tanguy Pruvot
108d0df565 Sort out settings.load with SD EEPROM emulation (#14458) 2019-07-01 09:10:17 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Andy Shaw
064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
InsanityAutomation
bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
doggyfan
90121047d9 Fix thermal protection with user thermistor (#14130) 2019-05-25 23:37:08 -05:00
chai-md
940ff8e7c8 Improve LV8729 stepping (#13776) 2019-05-11 19:02:19 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671) 
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
 2019-04-12 15:38:10 -05:00
ManuelMcLure
492883859e Don't protect unused CS pins (#13647) 2019-04-10 21:57:57 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
Scott Lahteine
aa1d587128 Some LCD code cleanup 2019-03-11 05:07:31 -05:00
pinchies
4df9509ead Add support for printers with inverted fan pins (#13362) 
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
 2019-03-10 20:51:21 -05:00
Reece Kibble
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Scott Lahteine
2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Scott Lahteine
f37df28d17 UBL G29 T current position fix 
Counterpart to #12845
 2019-02-26 22:25:53 -06:00
Scott Lahteine
808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
LinFor
ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
166e567ab8 Fix HAS_MOTOR_CURRENT_PWM 2019-02-10 05:06:46 -06:00
Marcio Teixeira
e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5 More Advanced Pause options (#12984) 2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Nicolas G
6fb4001b58 Add option to disable fan speed slowing in M303 (#13066) 2019-02-04 00:12:41 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855) 
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
 2019-01-14 14:29:55 -06:00
teemuatlut
50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Jacob Jordan
8be91677df Fix Skew factors (#12555) 
- Ensure Skew factors are calculated from test square measurements
 2018-11-29 11:39:31 -06:00
Marcio Teixeira
439a3e8463 Improve runout sensor, fix LIGHTWEIGHT_UI screen size (#12544) 2018-11-27 13:45:25 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Mateusz Krawczuk
ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine
a3923424c7 Clean up LCD width/height determination 2018-11-12 02:37:40 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
revilor
b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine
2c9586be0c Clear up HAS_WORKSPACE_OFFSET meaning 2018-11-03 04:06:37 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Ludy
9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine
e8031b1152 Add Custom Microstepping options 2018-10-25 11:26:32 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Scott Lahteine
d1c9517903 Followup to hotend_offset[Z] patch 2018-08-24 21:32:00 -05:00
Scott Lahteine
6964e1a95a Clean up trailing whitespace 2018-08-14 00:55:37 -05:00
Scott Lahteine
b328fb4dc9
Treat TMC2660 like non-TMC (#11508) 2018-08-10 00:30:28 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash (#11447) 2018-08-03 20:47:29 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE 
Co-Authored-By: nightgryphon <ngryph@gmail.com>
 2018-07-12 22:46:34 -05:00
Scott Lahteine
68e6650df7 Remove Quake Fast Inverse SQRT (it isn't faster) 2018-07-04 22:22:10 -05:00
Scott Lahteine
8eaac0dab3
Add delta feedrate scaling (#11153) 2018-06-30 13:44:27 -05:00
Scott Lahteine
1b8973eb1c Fix up microsteps conditionals 2018-06-27 23:41:32 -05:00
Scott Lahteine
7a84b03796 Use MIN/MAX in post-conditionals 2018-06-20 03:15:19 -05:00
Scott Lahteine
0d79128c8d Localize stepper-specific defines 2018-06-12 21:16:54 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping 
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
 2018-06-10 16:02:47 -05:00
etagle
39a7e7720d Adaptive multiaxis step smoothing 
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
 2018-06-10 16:02:47 -05:00
Scott Lahteine
83d42f33e1 Add HAS_HOTEND_OFFSET_Z conditional 2018-05-19 17:05:15 -05:00
Jiri Jaburek
43ddb29f9e Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:18:46 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
Scott Lahteine
325bbbc8c2
[2.0.x] Enable AD595 and AD8495 in concert (#10693) 
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
 2018-05-11 01:01:51 -05:00
Scott Lahteine
19f189b4e5
Add UBL support for G2/G3 and G5 (#10648) 2018-05-08 11:10:45 -05:00
Scott Lahteine
81b632c255 Additional temp-oriented improvements 2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
f790b4bc0a Reorganize some conditionals 2018-04-27 02:23:11 -05:00
Scott Lahteine
df6bc812b5 Fix disable of Z_HOMING_SENSITIVITY for HOMING_Z_WITH_PROBE 
As pointed out in #10532
 2018-04-27 02:23:10 -05:00
Scott Lahteine
299c4fed42 Undefine PIDTEMPBED without a bed heater 2018-04-26 01:30:10 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Scott Lahteine
11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Marcio Teixeira
5cc7916e69 Add G29_RETRY_AND_RECOVER feature 
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
 2018-04-19 19:45:53 -05:00
Scott Lahteine
39c6f65ce7 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:57:44 -05:00
Sean
2d9b0a66fe Add Filament Change accelerations 2018-04-09 23:57:27 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:06 -05:00
Karl Andersson
7cbbc2af7a [2.0.x] Optional heater signal inversion (#10260) 2018-04-02 19:37:41 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Eduardo José Tagle
97e8a6ebd9 Various fixes for DUE... (#10152) 
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
 2018-03-21 19:04:45 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
1d22609473 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 04:11:46 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
eb212ae073 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00