bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
5,855 Commits 1 Branch 4 Tags 151 MiB
3a3984e67a
Commit Graph

246 Commits

Author SHA1 Message Date
Neil Darlow
e541323741 Merge https://github.com/ErikZalm/Marlin into Marlin_v1 2014-05-09 15:02:50 +01:00
Alejandro Romero
1c9a70cee9 Support for Gen3 Monolithic electronics 
Techzone Monotronics support, ignoring the tip manager and using fan connector as on Sprinter FW
TODO: Add support for tipmanager
 2014-05-06 19:24:20 -05:00
Cameron Lai
105bebb466 Fix for pin mapping for SDSS pin and Fan pin, so Arduino library can be used 2014-04-25 12:57:47 +08:00
Cameron Lai
97ead2eccb Fix for microstepping pin mapping, not using Teensy pin mapping, but Arduino's default pin mapping so Arduino library can be used 2014-04-25 12:57:11 +08:00
Cameron Lai
2fa514e88a Add port for 5DPrint D8 Driver board 2014-04-24 12:55:00 +08:00
Neil Darlow
6adbdf42e0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-21 15:10:57 +01:00
nothinman
3ffc9651b1 Merge pull request #845 from DerSchultze/Sanguinololu-servo 
Added servo pin assignments to Sanguinololu
 2014-04-13 00:37:28 +01:00
Neil Darlow
73b380d8d2 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2014-04-06 19:15:29 +01:00
nothinman
dfb98101e4 Change CONTROLLERFAN_PIN for board 35 to -1, as it would conflict with board's 33 extruder pin, causing burnout (it's the same board, just different number of fans/extruders, therefore should be pin-compatible) 2014-04-03 18:05:48 +01:00
Neil Darlow
89f78b0b80 Allow use of either SD Card slot when LCD Panel is configured. 
Preference is for Controller SD slot before LCD Panel slot when both are occupied.
 2014-03-27 17:02:17 +00:00
Ralf Schultz
eecda434fb Sanguinololu servo pins set default disabled 2014-03-18 08:25:20 +01:00
Ralf Schultz
06709ad60e Added servo pin assignments to Sanguinololu 2014-03-17 15:45:13 +01:00
Peter
c9c83a4560 Updated gen3+ board pins names to current convention 2014-02-16 00:47:06 +13:00
daid
d16a770855 Ultimainboard 2.x does not has a PS_ON pin. 2014-02-13 10:57:03 +01:00
Jim Morris
5097c57d3a Added pins for Azteeg X3 Pro under motherboard 68 2014-02-05 14:25:42 -08:00
Jim Morris
b819fc53ca Add Azteeg X3 Pro as motherboard 68 
Add digipot i2c control for MCP4451
Allow M907 to set i2c digipot currents in amps
Fix Makefile to allow Azteeg motherboards
Fix Makefile to allow Wire libraries only
Add beeper pin for Azteeg X3 Pro
 2014-02-05 01:47:12 -08:00
Ronald
8d162e5bd7 Improved support for panelolu2 encoder and buzzer 
I added #define for LCD_FEEDBACK_FREQUENCY_HZ and
LCD_FEEDBACK_FREQUENCY_DURATION_MS  which is used to alter the default
buzzer sound.

When selecting Panelolu2 in configuration.h:
- it automatically sets the correct ENCODER_PULSES_PER_STEP and
ENCODER_STEPS_PER_MENU_ITEM.
- if LCD_USE_I2C_BUZZER is defined it will also set the default
LCD_FEEDBACK_FREQUENCY_HZ and LCD_FEEDBACK_FREQUENCY_DURATION_MS

When selecting the sanguinololu 1284p the following is true:
- its now enables  LARGE_FLASH
- It enables the gcode M300 when the panelolu2 LCD_USE_I2C_BUZZER is
defined
 2014-02-03 07:45:03 +00:00
daid
df194f75e1 Added PT100 support for Ultiboard2 2014-01-06 11:20:03 +01:00
daid
380144c20f Add Ultiboard2 electronics. With PWM current settings. For the few people that have this new board as experiment in their UM-Original. 2014-01-06 11:05:02 +01:00
Michal Dyntar
e8786bf110 Added support for Cheaptronic v1 electronic 2013-12-07 13:29:47 +01:00
ErikZalm
59b96e323e Merge pull request #640 from fmalpartida/SAV-MkI 
Added support for BT on AT90USB devices, corrected LCD bug, added new board and LCD
 2013-11-10 07:26:08 -08:00
Daniel Benamy
cab84e0e5b Add (correct) missing pin definitions for Y2 
I tested this and it works.
 2013-10-30 22:44:20 -04:00
fmalpartida
b5a964fcc5 Initial SAV MkI (RepRap CloneWars board) integration. 
Included support for BT dongle on AT90USB boards.
Added LCD Shift Register LCD control
Included support for RepRap Clone Wars project board (SAV MKI).
 2013-10-30 11:45:32 +01:00
Erik van der Zalm
8a08cca0f2 Added temperature status less. 
Hopefully fixed viky button handling without braking other boards
 2013-10-20 12:12:35 +02:00
phq1910
4f7c6dfe35 Update pins.h 
Include Pins cpu Sethi 3D
 2013-09-26 11:40:54 -03:00
Erik van der Zalm
0dca49a7c0 Added Azteeg X3 board. 2013-09-24 17:31:16 +02:00
Martin Lukasik
acd8619809 Fan fix for Panelolu2+Sanguinololu. 2013-09-10 22:10:58 +01:00
Steve Kelly
53614e5144 add pins for rambo lcd 2013-08-03 11:45:53 -05:00
Guillaume Seguin
1902d339b0 Add Panelolu2 pins for RAMPS1.3 2013-07-28 19:19:57 +02:00
Guillaume Seguin
34da3a0a3f Merge github.com:ErikZalm/Marlin into Marlin_v1 
Conflicts:
	Marlin/language.h
 2013-07-23 21:46:41 +02:00
Michael Mayer
99b7e926e7 added MaKr3d Melzi board 2013-07-14 15:17:55 +07:00
Nicolas Rossi
2daa85918e Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin.git into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin_main.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/ultralcd.cpp
 2013-06-20 23:59:56 +02:00
Erik van der Zalm
2015989f84 Added DISABLE_MIN_ENDSTOPS 2013-06-18 19:20:26 +02:00
lajos
02dee80fa5 added Azteeg X1 motherboard 2013-06-15 16:58:17 -04:00
Erik van der Zalm
26a441fc7d More 3Drag controller patches. 2013-06-10 18:26:15 +02:00
Erik van der Zalm
408169aef4 Merge branch 'Marlin_v1' of https://github.com/BorisLandoni/Marlin into BorisLandoni-Marlin_v1 
Conflicts:
	Marlin/Configuration.h
	Marlin/language.h
	Marlin/pins.h
 2013-06-09 22:57:40 +02:00
Erik van der Zalm
bd96d22bfb Merge branch 'Marlin_v1' into thinkyhead 
Conflicts:
	Marlin/Configuration.h
	Marlin/Configuration_adv.h
	Marlin/Marlin.h
	Marlin/Marlin_main.cpp
	Marlin/Servo.cpp
	Marlin/language.h
	Marlin/pins.h
	Marlin/planner.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
	README.md
 2013-06-09 22:26:47 +02:00
kiyoshigawa
6a81291c57 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 
This should fix issues with pull request 467, I hope.

Conflicts:
	Marlin/Configuration.h
	Marlin/Marlin.pde
	Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-06-08 08:48:18 -06:00
BorisLandoni
4c7d1436e9 Update pins.h 2013-06-07 18:37:44 +03:00
Scott Lahteine
5dabc95409 Apply all changes from latest Marlin_V1 
Diffed and merged, preserving my updates
 2013-06-06 15:49:25 -07:00
Gord Christmas
a733537ddd Missed some variable declarations 
Integrated fixes from henrikbrixandersen pull request #504
 2013-06-06 09:18:03 -07:00
Erik van der Zalm
79374f0b93 Merge branch 'reisnyderb' of https://github.com/ErikZalm/Marlin into Marlin_v1 2013-06-05 17:44:48 +02:00
Erik van der Zalm
5090c56651 More redundant temp sensor changes. (After testing and debugging by reifsnderb) 2013-05-29 19:29:30 +02:00
Gatulibu
b78fa6bb70 Added support for Megatronics v2.0 and Minitronics v1.0 
merged from code downloaded from reprapworld.com
 2013-05-28 14:03:31 +02:00
Erik van der Zalm
7231a20dba Put #ifdef around servo pins in pins.h. This allows the pins to be used for M42. 2013-05-24 21:05:11 +02:00
Bas Spaans
424101110c Add Panelolu2 support for Melzi 2013-05-19 12:09:34 +02:00
Robert F-C
dfa549f268 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2013-05-18 21:59:39 +10:00
ErikZalm
64360164ad Merge pull request #482 from codexmas/Marlin_v1 
servosupport
 2013-05-16 10:19:00 -07:00
Gord Christmas
dc59f07d24 First attempt at refactoring of original servo code. Only adding servo support as a start to keep things simple. 2013-05-16 07:03:01 -07:00
MaikStohn
9cc15876be Add support for RUMBA thermocouple add on 2013-05-16 01:16:08 +02:00
Erik van der Zalm
bd2cd4903e Added #ifdef BARICUDA around the BariCUDA changes 2013-05-14 23:56:32 +02:00
Jordan Miller
fbd899a37d Support for BariCUDA Paste Extruder derived from MakerBot Frostruder. Using Ultimachine RAMBo board. M126/M127 and M128/M129. 2013-05-14 23:34:45 +02:00
gregor
2739c26c4f changes: 
- changed the variables from keypad to reprapworld_keypad
- added a missing ifdef check
 2013-05-10 22:20:02 +02:00
gregor
6fb9573157 added support for the reprapworld keypad 2013-05-10 21:57:17 +02:00
kiyoshigawa
b27a59f41e Added support for Elefu RA Board and Elefu Control Panel 2013-05-06 08:44:38 -06:00
Scott Lahteine
a200521eab Added CUSTOM_MENDEL_NAME option to Configuration.h and language.h 
Also cosmetic comment changes and spelling corrections in printed
messages
 2013-05-02 09:22:58 -07:00
Robert F-C
788d62bcc4 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 
Conflicts:
	Marlin/Marlin.pde
	Marlin/ultralcd.cpp
	Marlin/ultralcd_implementation_hitachi_HD44780.h
 2013-04-29 21:13:46 +10:00
daid
4b2ece159b Merge pull request #453 from brackendawson/Marlin_v1 
Make Gen7 1.4+ heater temp sensort pins match silkscreen.
 2013-04-16 10:12:25 -07:00
Bracken Dawson
d5ee2a5a62 Make Gen7 1.4 heater pins match silkscreen 2013-04-16 17:37:38 +01:00
ErikZalm
86867928ac Merge pull request #434 from DDRBoxman/Marlin_v1 
Add support for M300: Play beep sound
 2013-03-30 08:49:54 -07:00
Colin Edwards
0d075378d5 Add LARGE_FLASH define and enable it for some of the beefier boards 
The LARGE_FLASH flag allows superfluous features to be excluded
on boards with less memory
 2013-03-25 10:42:27 -05:00
blddk
91bea43332 Added rumba pinout 2013-03-22 18:29:47 +01:00
Nicolas Rossi
aba67e2449 No bed config for RAMPS 
The motherboard 35 is a config without bed with this pins setting :
D8 Extruder
D9 Fan
D10 Controller Fan
 2013-03-05 15:51:24 +01:00
Dirk Eichel
140e095c6e Add pins for Motherboard variant 64 
These definition contain also the definition for the graphics LCD.
 2013-03-01 17:47:32 +01:00
Robert F-C
1292d735ba Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575) 
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
 2013-02-28 02:04:51 +11:00
Bas Spaans
12c41423ad Fixed typo in comment 2013-01-30 22:54:04 +01:00
Bas Spaans
0995eaa492 Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries 2013-01-30 22:25:01 +01:00
daid303
408b349a84 Fixed #368. Commented out the wrong pin definition, but explained why it is there. 2013-01-21 15:46:17 +01:00
Yuri Valentini
86358dd6cd Panelolu pin assignment for sanguinololu from http://reprap.org/wiki/Panelolu 2013-01-10 12:23:20 +01:00
daid303
bbe7d3d0fe Fixed #312 2013-01-08 17:09:57 +01:00
daid
30254e3388 Merge pull request #350 from jcrocholl/Marlin_v1 
Automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR.
 2012-12-17 02:16:31 -08:00
Johann Rocholl
8caf5d252d Remove bogus blank line. 2012-12-16 12:50:20 -08:00
Johann Rocholl
b39f5d614a For boards with only one endstop per axis, automatically set *_MIN_PIN and *_MAX_PIN according to *_HOME_DIR. 2012-12-16 12:09:53 -08:00
oni303
ab09fa4bbf fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp 2012-12-16 01:36:57 +01:00
daid303
5ff5cee8ce Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 2012-12-11 14:53:53 +01:00
Johann Rocholl
ca409e5531 Fix X/Y/Z_MIN_PIN for Printrboard. 2012-12-11 01:59:48 -08:00
Johann Rocholl
33247733e0 Teensylu and Printrboard use different analog pins for thermistors. 2012-12-09 02:19:13 -08:00
Johann Rocholl
6cba11f087 Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
Johann Rocholl
4d351b4846 Improved formatting and comments for consistency. 2012-12-08 20:15:53 -08:00
Johann Rocholl
a30007caa4 If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins. 2012-12-08 19:46:42 -08:00
Johann Rocholl
b1c38d4c82 Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater. 2012-12-08 11:34:18 -08:00
Johann Rocholl
42e21bb06e Add support for Printrboard (from https://github.com/lincomatic/Marlin) and Brainwave (from https://github.com/metrix/Sprinter). 2012-12-08 10:49:01 -08:00
brupje
57429cb9fe Fix for keypad 2012-11-29 21:42:19 +01:00
Erik vd Zalm
f934d0ef5b Merge remote-tracking branch 'tonokip/Marlin_v1' into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
 2012-11-21 20:36:30 +01:00
daid303
ffc69537aa Update on some comments, make the MOTHERBOARD list complete again. 2012-11-09 09:10:51 +01:00
Jonathan Bastien-Filiatrault
0f73afb0b0 Avoid defining overriding definitions for the RepRapDiscount Smart 
Controller. Remove common definitions. Harmonize declaration order.
 2012-11-07 16:04:28 -05:00
Jonathan Bastien-Filiatrault
36b452c7ac Remove abbrs. 2012-11-07 15:42:18 -05:00
Jonathan Bastien-Filiatrault
3cbaad9288 RepRapDiscount Smart Controller pin definitions. 2012-11-06 20:32:13 -05:00
Bracken Dawson
f5631a89e8 Add dummy Emergancy Pin to Gen7 1.4 
Change required after pulling from ErikZalm.
 2012-10-26 22:28:37 +01:00
Bracken Dawson
a4f9e1ebf2 Merge git://github.com/ErikZalm/Marlin into Marlin_v1 2012-10-26 22:20:35 +01:00
Bracken Dawson
2873d67b17 Put bogus temp override back in Gen7 up to 1.3 
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
 2012-10-26 22:17:26 +01:00
brupje
d07b6e93d5 Add support for Megatronics 2012-10-14 14:05:12 +03:00
johnnyr
8016f058bc fix max endstop pins 2012-09-19 13:15:17 -05:00
Erik vd Zalm
abf0693e8e Added KILL_PIN -1 to gen7 boards 2012-09-04 08:20:27 +02:00
Drakelive
d728e35658 Update Marlin/pins.h 2012-08-30 23:36:49 +03:00
tonokip
1c1fddc7ac Added support for the Rambo reprap electronics board. Added Mcodes to set 
motor current and microstepping pins.
 2012-08-30 00:16:57 -07:00
Bracken Dawson
47d4f55bc0 Fix Gen7 1.4 pinout 
Gen7 1.4 uses very different pin assignments, might as well make a new
section and remove some of the conditionals from each. It's easier to change
your pin assingment this way if like me you don't wire it exactly to plan.
 2012-08-22 23:15:46 +01:00
Enchiridion
50cde90324 Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
Chris Palmer
538189cc19 Fixed soft limits when the origin is in the middle. 
HOME_POS is now always where the endstop is and can be outside the limits.
The limits are now defined by MIN_POS and MAX_POS rather than HOME_POS and MAX_LENGTH.
The Z is axis now homed first if direction is away from the bed.

Saguinololu limit pins change from MIN to MAX according to the homing direction.
 2012-07-14 22:24:26 +02:00
Daid
e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) 2012-05-24 18:36:55 +02:00
Guan Yang
602c8ee02b Melzi support 2012-05-09 18:37:07 -04:00
Bernhard
464b755918 added support for the UltiController 2012-04-22 20:55:56 +02:00
Michel Pollet
5550e893d5 New board variant, Open Motion Controller 
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/

Signed-off-by: Michel Pollet <buserror@gmail.com>
 2012-03-22 13:51:21 +00:00
Erik van der Zalm
2e749d60c3 Added DISABLE_MAX_ENDSTOPS 2012-03-12 20:32:14 +01:00
ErikZalm
19a47dae4a Merge pull request #99 from Justblair/master 
Better pin configuration for rotary encoder in RAMPS boards
 2012-03-11 04:34:59 -07:00
Erik van der Zalm
c077316b2b Added PID autotune. (experimental) 
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
 2012-03-08 21:43:21 +01:00
Blair Thompson
02ee9e3d30 Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4 
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
 2012-03-04 21:34:20 +00:00
Erik van der Zalm
cb0c84e075 Merge remote-tracking branch 'justblair/master' into Marlin_v1 2012-03-03 20:20:55 +01:00
ErikZalm
1d5809d458 Merge pull request #88 from daid/Marlin_v1 
Made plan_buffer_line arguments const...
 2012-03-03 11:18:14 -08:00
Erik van der Zalm
ed951b1977 Fixed RAMPS 1.2 support (Found and fixed by rrhb) 2012-03-03 20:15:41 +01:00
Blair Thompson
f278e1c00f This is in my opinion a much better way of dealing with SD cards than my previous fix. 
Instead of adding a momentary switch to fake the insertion of the card I have modified the ultralcd menu item:

Card Menu -> Refresh

to reinitialise the card providing that the SDCARDDETECT pin has been set to -1 in the pins.h file.  This requires one less switch on the front panel and the refresh menu item is in the most relevent place for a user who wishes to inert a card and then print from it.

It also means that the "Card inserted" messages do not bother the users of these card readers (they dont make sense for users without SCCARDDETECT)
 2012-03-03 16:30:31 +00:00
Daid
00d33e6b82 Typo fix 2012-02-29 19:01:21 +01:00
Daid
7d124478fa Only protect the heater pins for the defined extruders. 
Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
 2012-02-29 15:49:02 +01:00
ErikZalm
1ebe7d1ab6 Merge pull request #83 from phord/tempfix 
Add explicit #define for bogus temp override
 2012-02-27 08:36:45 -08:00
Phil Hord
b65ef8d66c Add support for upcoming Gen7 v1.4 
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board.  Add a new motherboard type to
support this feature.
 2012-02-26 20:39:49 -05:00
Phil Hord
740f0c7690 Add explicit #define for bogus temp override 
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature.  But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
 2012-02-26 20:26:16 -05:00
Phil Hord
ba8500a236 pins.h: Define Z_MAX_PIN for Gen7 board 
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail.  Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
 2012-02-26 20:18:39 -05:00
Changwoo Ryu
7b14953c99 Fix build on Sanguino based boards with ATmega1284P 2012-02-27 04:12:55 +09:00
Daid
286d5003fa Fixed compiler warning for Sanguino compile 2012-02-26 17:35:01 +01:00
Erik van der Zalm
ce714fe306 Fixes in pins.h 2012-02-25 22:55:17 +01:00
Erik van der Zalm
35e57bf149 Added gen6 deluxe. 2012-02-25 17:44:45 +01:00
Erik van der Zalm
84ea2d61e8 Moved gen7 boards to motherboard type 10, 11 and 12. 
Split ramps1.3 in Sprinter like config and multiextruder config.
 2012-02-24 23:34:41 +01:00
Erik van der Zalm
d298dd121f merged SBUBA82 and Justblair 2012-02-21 20:26:59 +01:00
Blair Thompson
a05a261b72 Added a workaround. Ramps SD card does not have sdcarddetect. My temporary solution is to add a momentary swtich 
that pulls down the SDCARDDETECT pin and mimicking the pull and reinsert ofa a SD card
 2012-02-18 23:56:31 +00:00
Blair Thompson
1b6765ed12 Updated the pin config for RAMPS 1.3 to include ultimaker new style LCD/Rotary Encoder interface 2012-02-18 18:25:04 +00:00
Christian Thalhammer
e661578c84 support for GEN7 1.1,1.2 and 1.3 2012-02-17 10:46:48 +01:00
Christian Thalhammer
d309565b56 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 
Conflicts:
	Marlin/Configuration.h
 2012-02-13 13:07:55 +01:00
Erik van der Zalm
11518a987f merged with triffid fork 2012-02-12 13:58:36 +01:00
Erik van der Zalm
da040fd393 Fixed ultimaker heater 1 pins. (Thanks daid) 2012-02-09 17:19:45 +01:00
Christian Thalhammer
a11f3b2d2f - Pins for modified GEN7 assigned 
- Added support for ATMega1284
 2012-02-06 11:49:23 +01:00
Erik van der Zalm
9f139d6e0e Added MAX6675 support. (Thanks to gregfrost) 
Needs some work to remove the blocking in read max6675.
 2012-02-05 13:05:07 +01:00
Erik van der Zalm
e45e5c68bb Added support for Gen3+ (Pins file only) 
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.

Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
 2012-02-05 12:42:15 +01:00
Michael Moon
ab01658fd2 local configuration stuff- WATCHPERIOD causes breakage, disable. few other misc changes 2012-01-24 17:02:45 +11:00
Michael Moon
71dc82e0b4 my local configuration 2012-01-24 13:19:37 +11:00
Bernhard
cee5f9020a added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output. 2012-01-15 17:06:10 +01:00
Bernhard
415aadf704 lcd panel bed support 
advance and ultipanel not any more in default config
 2011-12-22 11:45:52 +01:00
Erik van der Zalm
e017228569 Merged multiple extruder support. 
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
 2011-12-12 19:34:37 +01:00
Denis B
4fd75dc813 Working version of multiple extruders (up to 3) 
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4
 2011-12-06 00:09:16 -05:00
Bernhard
b0c3871750 more fixing of the sanguino math round problem 2011-11-30 09:07:56 +01:00
Bernhard Kubicek
7b70caab7c made progmem mainly, found one bug in cardreader, added a empty class for cardreader in case no sd support. 2011-11-07 22:33:13 +01:00
Erik van der Zalm
76b3f805c0 Added teensylu pins 2011-11-06 19:30:04 +01:00
Bernhard Kubicek
1d171e9e52 reformating and some minor bugs/things found on the way. 2011-11-06 19:23:08 +01:00
Bernhard Kubicek
40e8081623 changed end of line to windows, which seems to be the majority of developers main platform. 2011-11-05 14:19:57 +01:00
Erik van der Zalm
d7c4f0780b Added M42, M80 and M81 2011-11-05 11:18:52 +01:00
Erik van der Zalm
094afe7c10 Merged Marlin, Marlin non gen6 and Ultimaker changes 2011-11-04 18:02:56 +01:00
Erik van der Zalm
750f6c33e3 first commit 2011-08-12 22:28:35 +02:00