bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,581 Commits 1 Branch 4 Tags 151 MiB
21e1148d98
Commit Graph

271 Commits

Author SHA1 Message Date
Scott Lahteine
566d05006d report_state > event_handler 
Make the endstop report method track endstop changes on its own.
 2018-07-11 21:08:07 -05:00
Scott Lahteine
1a0f4dedad
Fix and improve POWER_LOSS_RECOVERY (#11187) 2018-07-02 23:21:28 -05:00
TheLongAndOnly
cedc158106 [2.0.x] Board specific init macro (#11170) 2018-07-01 23:11:42 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 (#11034) 2018-06-18 22:04:03 -05:00
Simon Jouet
e2aeda61ed HAL for Espressif ESP32 Wifi 2018-06-13 19:33:35 -05:00
Scott Lahteine
f2c3b0d476 Use bit flags for homed/known 2018-06-11 22:05:16 -05:00
Scott Lahteine
968a5d2e63 Protected pin err for M226 2018-06-10 17:45:47 -05:00
Scott Lahteine
0ca9db7051 Correct HOTENDS for SWITCHING_EXTRUDER 2018-05-27 23:22:48 -05:00
etagle
569df3fc0c Fix interrupt-based endstop detection 
- Also implemented real endstop reading on interrupt.
 2018-05-20 07:10:24 -05:00
etagle
a11eb50a3e Refactor and optimize Stepper/Planner 
Better encapsulation and considerably reduce stepper jitter
 2018-05-20 06:23:58 -05:00
GMagician
3c76bda2d8 Fix switching extruder 
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
 2018-05-19 17:05:15 -05:00
Scott Lahteine
35258dd50b Consistent heating status and status reset 
Fix #10699
 2018-05-13 17:18:19 -05:00
Scott Lahteine
625035a9ce
Fix M301 access to lpq_len (#10714) 
Co-Authored-By: Zwaubel
 2018-05-12 02:13:40 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner (#10713) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 01:38:02 -05:00
Scott Lahteine
05fca752d6 Clean up autostart handling 2018-05-01 01:35:57 -05:00
Scott Lahteine
11ab017dd0 Creality3D Power-Loss Recovery 2018-04-21 21:56:50 -05:00
Scott Lahteine
6c7a17dba6
Abort SD printing more safely (#10407) 
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
 2018-04-15 18:27:54 -05:00
Chris Pepper
cc6d41e1d3 Use a macro for HAL header redirection (#10380) 2018-04-12 20:25:08 -05:00
Scott Lahteine
56486c5c0e Apply const to manage_inactivity 2018-04-08 04:00:26 -05:00
Bob-the-Kuhn
902c885782 Switch to TMC2130 compatible hardware SPI & misc (#10299) 2018-04-04 20:13:27 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
1cb810ff1c
[2.0.x] Automatically reset stepper timeout (#10179) 
* Automatically reset stepper timeout in manage_inactivity

Any code that adds moves to the planner can skip resetting the stepper timeout. We can let `idle` / `manage_inactivity` reset the timer whenever it detects any moves in the planner.

* blocks_queued => has_blocks_queued
 2018-03-21 19:30:06 -05:00
Eduardo José Tagle
97e8a6ebd9 Various fixes for DUE... (#10152) 
- Watchdog reset during SD Card initialization.
- Move `DebugMonitor` to `DebugMonitor_Due.cpp`.
- Since the watchdog is enabled on boot do extra resets during init.
- Have `thermalManager` do watchdog reset before its ISR starts to prevent reset.
- Ensure that timers are stopped before reprogramming them to address tone issues.
- Improve SAM3XE reset when reflashed through the native port.
 2018-03-21 19:04:45 -05:00
Scott Lahteine
9fd1016bb1 Trust the bootloader to clear globals 2018-03-21 05:49:39 -05:00
Scott Lahteine
ae39fbd646 Also suppress keepalive with suspend_auto_report 2018-03-21 00:29:09 -05:00
Bob-the-Kuhn
53362b81cc Tone fixes/changes (#10151) 2018-03-19 04:48:06 -05:00
Scott Lahteine
72281c4ff9 Turn power off in kill instead of setting PS_ON to input 2018-03-19 02:37:55 -05:00
Scott Lahteine
0543362b34 Don't init the tone timer if no BEEPER_PIN 2018-03-17 18:59:43 -05:00
Scott Lahteine
317673fec3 Init watchdog last in setup() 2018-03-08 17:34:50 -06:00
Scott Lahteine
eb212ae073 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:57:09 -06:00
Scott Lahteine
ffbf63e6af Add HAS_TEMP_SENSOR conditional 2018-03-07 01:53:50 -06:00
Scott Lahteine
36262a0479
Use static classes for job timers (#9938) 2018-03-04 21:23:43 -06:00
Bob-the-Kuhn
025118da3e Init print_job_timer in setup() instead of "early" (#9937) 2018-03-04 16:23:44 -06:00
TheSFReader
eb079959fb Report sd card progress [FR] #9751 (#9832) 
* SD Status auto-report feature
Feature Request #9751
 2018-02-26 15:38:27 -06:00
Scott Lahteine
cfdcf91df5 Fix compile error with initTone 2018-02-26 01:49:48 -06:00
Scott Lahteine
65519263f4 Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:13:34 -06:00
Scott Lahteine
73cd34b121 Finish AUTO_POWER_CONTROL implementation 
Followup to #9503
 2018-02-19 16:12:04 -06:00
Studiodyne
d3ca82d8c2 Support for multiple filament runout sensors 2018-02-19 07:02:50 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support (#9701) 
Implemented for LPC1768.
 2018-02-18 19:26:23 -06:00
Scott Lahteine
93c0198b2d Init LCD welcome message programmatically 2018-02-14 05:09:44 -06:00
teemuatlut
5990266724 Init CS pins before loading settings (#9566) 2018-02-10 14:08:53 -06:00
Scott Lahteine
112917cfef No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 05:19:33 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update (#9533) 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 03:57:11 -06:00
Scott Lahteine
b3f115fa0a
Marlin.ino needs no content (#9506) 2018-02-06 02:28:18 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
a718f5bdf3 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 04:38:37 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Scott Lahteine
7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Scott Lahteine
9686ffedef Single pause flag also indicates SD print pause 2017-12-30 04:44:59 -06:00
Scott Lahteine
026e301307 lcd_map_control deps on ULTIPANEL 2017-12-25 07:46:25 -06:00
etagle
33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
etagle
b6f9c333d4 Adding hooks into the idle loop so HALs can execute 2nd plane tasks, such as serving SD card read/writes requested from the USB MSD layer 2017-12-21 02:22:08 -03:00
Scott Lahteine
4782acf60e
Merge pull request #8780 from fiveangle/bf2-typo 
[2.0.x] typo in Marlin.cpp
 2017-12-15 15:25:41 -06:00
teemuatlut
0cd1e91056 [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
Dave Johnson
69efb87d19 typo in Marlin.cpp 2017-12-14 08:20:45 -08:00
Scott Lahteine
e37dd64548 Apply LEDColor, language fixes 2017-11-29 23:58:12 -06:00
Scott Lahteine
9406c87a97 Fix up LCD init / charset 2017-11-22 18:22:55 -06:00
Scott Lahteine
4371345cbe
Don't re-init graphical LCD after boot screen 
Followup to 13a3fb1acc
 2017-11-21 18:23:39 -06:00
Scott Lahteine
c0000a0cdc Move servo code to modules/servo.* 2017-11-19 14:23:02 -06:00
Bob-the-Kuhn
c14000775b PWM fixes, slow down fan update 
include LPC1768 syntax for M42

couple more pin_t changes

consistency

change M42 to R, P format

Revert "change M42 to R, P format"

This reverts commit 01f12f579ec9ccc1bb9126e68d2c86449e9b7edf.
 2017-11-18 07:05:50 -06:00
Scott Lahteine
b7feb53e8a Support for Extrudrboard in Printrboard Rev.F 2017-11-13 15:44:23 -06:00
Scott Lahteine
79772219ae Fix Fan Multiplexer init 2017-11-04 22:28:46 -05:00
AnHardt
ca0e4b4e96 Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()' 
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
 2017-11-03 12:02:48 +01:00
Scott Lahteine
31e96935f7 Fix EXTRA_FAN_SPEED 
Addressing #8158
 2017-10-30 00:10:00 -05:00
Scott Lahteine
c45514f811 Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity 
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
 2017-10-26 17:24:38 -05:00
Thomas Moore
9e699811d2 Make LPC1768 pinmapping not specific to Re-ARM (#8063) 
* Merging early because of build failures.  See #8105

* Make LPC1768 pinmapping not specific to Re-ARM

* Add HAL_PIN_TYPE and LPC1768 pin features

* M43 Updates

* Move pin map into pinsDebug_LPC1768.h

* Incorporate comments and M226

* Fix persistent store compilation issues

* Update pin features

* Update MKS SBASE pins

* Use native LPC1768 pin numbers in M42, M43, and M226
 2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9 Neopixel changes for parity with 1.1.x 2017-10-25 18:40:04 -05:00
Roxy-3D
72156a2029 change to better (more clear) names (#8050) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 11:42:26 -05:00
Scott Lahteine
ce48403a0b Add EXTRA_FAN_SPEED feature 
Based on #7883 by @studiodyne
 2017-10-16 02:34:13 -05:00
Scott Lahteine
f8e8fcb978 Move FILAMENT_RUNOUT_SENSOR to a feature 2017-10-10 02:37:42 -05:00
Slawomir Ciunczyk
a11e6a1022 Different NEOPIXEL types 
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
 2017-10-10 02:17:36 -05:00
Chris Pepper
46b2773e13 General fixes for LPC1768 (#7834) 
* fixed some include paths

* LPC1768: Fix Serial API

Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API

* LPC1768: add filters to ADC

This is to try and compensate for hardware issue and oversensitivity to noise

* LPC1768: remove the polling section of delayMicroseconds

* LPC1768: lock usb mass storage device while device accesses it.

Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.

* Add timeout to make sure if Serial never connects that Marlin still boots

* Remove unneeded ifdef CPU_32_BIT

In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform

* LPC1768: relocate RE-ARM debug_extra_script.py
 2017-10-04 15:40:54 -05:00
Phr3d13
10c1b442ca Fixes for Anet10 and gt2560 
Fixes for 2 "... not declared in this scope" compiler errors.
 2017-09-27 07:34:02 -05:00
Scott Lahteine
f9ef446fb5 Clean up after refactor 2017-09-21 16:27:12 -05:00
Scott Lahteine
64dfb46461 Move z_endstop_adj to Endstops 2017-09-21 16:27:11 -05:00
Scott Lahteine
a10451ceed Move Volumetric methods to Planner 2017-09-21 16:27:11 -05:00
Scott Lahteine
6f92ab7eed Move Controller Fan to feature 2017-09-21 16:27:11 -05:00
Scott Lahteine
07cf75883f Move T (tool change) to cpp 2017-09-21 16:27:10 -05:00
Scott Lahteine
927524af6b Move M999 to cpp 2017-09-21 16:27:10 -05:00
Scott Lahteine
1a37ebc76d Move M163-M165 MIXING_EXTRUDER to cpp 2017-09-21 16:27:10 -05:00
Scott Lahteine
8ca0b2fd68 Move M355 caselight to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine
59608086e6 Move M350_M351 to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine
6e0503eab2 Move M907-M910 to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine
2e89685154 Move TMC2130 g-codes to cpp 2017-09-21 16:27:09 -05:00
Scott Lahteine
19dde5be03 Move M900 to cpp 2017-09-21 16:27:08 -05:00
Scott Lahteine
1b0acbff72 Move M605 to cpp 2017-09-21 16:27:08 -05:00
Scott Lahteine
75cf17d816 Move M702 MK2_MULTIPLEXER to cpp 2017-09-21 16:27:08 -05:00
Scott Lahteine
7ba2ab4fb3 Move M540 to cpp 2017-09-21 16:27:07 -05:00
Scott Lahteine
a90c7dbf64 Move M500-M503 to cpp 2017-09-21 16:27:07 -05:00
Scott Lahteine
aab5489962 Move M428 to cpp 2017-09-21 16:27:07 -05:00
Scott Lahteine
1fe25271e4 Move M401_M402 to cpp 2017-09-21 16:27:07 -05:00
Scott Lahteine
0589884d26 Move M400 to cpp 2017-09-21 16:27:06 -05:00
Scott Lahteine
4a220a8b79 Move M380_M381 to cpp, solenoid feature 2017-09-21 16:27:06 -05:00
Scott Lahteine
9be8cb0ac9 Move M360-M364 to cpp 2017-09-21 16:27:06 -05:00
Scott Lahteine
828405cac8 Move M302 to cpp 2017-09-21 16:27:06 -05:00
Scott Lahteine
8584f7e390 Move M250 to cpp 2017-09-21 16:27:05 -05:00
Scott Lahteine
ebb9bd5419 Move M240 to cpp 2017-09-21 16:27:05 -05:00
Scott Lahteine
d4aaa0f1c8 Move M304 to cpp 2017-09-21 16:27:05 -05:00
Scott Lahteine
609c4eea32 Move M301 to cpp 2017-09-21 16:27:04 -05:00
Scott Lahteine
4f14849675 Move M300 to cpp 2017-09-21 16:27:04 -05:00
Scott Lahteine
6ed5252884 Move M280 to cpp 2017-09-21 16:27:04 -05:00
Scott Lahteine
d4d3d92f8a Move M260_M261 to cpp 2017-09-21 16:27:04 -05:00
Scott Lahteine
3e761696a0 Move M226 to cpp 2017-09-21 16:27:03 -05:00
Scott Lahteine
0e319104c2 Move M220 to cpp 2017-09-21 16:27:03 -05:00
Scott Lahteine
234de3547c Move M211 to cpp 2017-09-21 16:27:03 -05:00
Scott Lahteine
6c7bad8bc3 Move M666 to cpp 2017-09-21 16:27:03 -05:00
Scott Lahteine
f5877aa93e Move M665 to cpp 2017-09-21 16:27:02 -05:00
Scott Lahteine
33861d4e04 Move M206 to cpp 2017-09-21 16:27:02 -05:00
Scott Lahteine
7aca9fe2f7 Move M203-M205 to cpp 2017-09-21 16:27:02 -05:00
Scott Lahteine
b3822b9242 M202 is unused 2017-09-21 16:27:02 -05:00
Scott Lahteine
5e63efc1d9 Move M201 to cpp 2017-09-21 16:27:01 -05:00
Scott Lahteine
92c15f5578 Move M150 to cpp 2017-09-21 16:27:01 -05:00
Scott Lahteine
eef4a54778 Move M119-M121 to cpp 2017-09-21 16:27:01 -05:00
Scott Lahteine
379f16558e Move M118 to cpp 2017-09-21 16:27:00 -05:00
Scott Lahteine
811c32b85a Move M117 to cpp 2017-09-21 16:27:00 -05:00
Scott Lahteine
1d2061c935 Move M115 to cpp 2017-09-21 16:27:00 -05:00
Scott Lahteine
81b8fbf4d6 Move M114 to cpp 2017-09-21 16:27:00 -05:00
Scott Lahteine
5d2681a105 Move M100 to cpp 2017-09-21 16:26:59 -05:00
Scott Lahteine
beb346e49f Move M92 to cpp 2017-09-21 16:26:59 -05:00
Scott Lahteine
381b17e6a9 Move M18_M84, M85 to cpp 2017-09-21 16:26:59 -05:00
Scott Lahteine
a911215b0e Move M82_M83 to cpp 2017-09-21 16:26:59 -05:00
Scott Lahteine
4b9d1b9f26 Move M80-M81 to cpp 2017-09-21 16:26:58 -05:00
Scott Lahteine
0c7ba52451 Move M149 to cpp 2017-09-21 16:26:58 -05:00
Scott Lahteine
cbf40f7ee9 Move M145 to cpp 2017-09-21 16:26:58 -05:00
Scott Lahteine
b464887ea1 Make BARICUDA a feature 2017-09-21 16:26:57 -05:00
Scott Lahteine
14a5d2a273 Move M113 to cpp 2017-09-21 16:26:57 -05:00
Scott Lahteine
06f3c8029e Move M111 to cpp 2017-09-21 16:26:57 -05:00
Scott Lahteine
a831977dee Move M110 to cpp 2017-09-21 16:26:57 -05:00
Scott Lahteine
7479ff98b7 Move M140, M190 to cpp 2017-09-21 16:26:56 -05:00
Scott Lahteine
5b3e49babd Move M108, M112, M410 to cpp 2017-09-21 16:26:56 -05:00
Scott Lahteine
df0432c7c8 Move M155 to cpp, auto-report to Temperature 2017-09-21 16:26:56 -05:00
Scott Lahteine
df031ab100 Move M106_M107 to cpp 2017-09-21 16:26:56 -05:00
Scott Lahteine
99c4b9050a Move M105 to cpp 2017-09-21 16:26:55 -05:00
Scott Lahteine
a41130f854 Temp stat LEDs 2017-09-21 16:26:55 -05:00
Scott Lahteine
2c1eda9e00 Move M75-M78 to cpp 2017-09-21 16:26:55 -05:00
Scott Lahteine
fc52fc72ac Move M48 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
be8d913484 Move M43 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
10fab24e50 Move M42 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
69b664b6fe Move M31 to cpp 2017-09-21 16:26:54 -05:00
Scott Lahteine
a442c34a1a Move SD commands to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
be0e4a4ad0 Consolidate pause, apply to M125, M600, M24 2017-09-21 16:26:53 -05:00
Scott Lahteine
adca4a9b79 Move M17 to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
33e00b6cd6 Move M3-M5 to cpp 2017-09-21 16:26:53 -05:00
Scott Lahteine
04583d46af Move M0_M1 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
04376975ce Move G92 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
931aa79d85 Move G42 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
84ddae56a8 Move G38 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
b8adae0785 Move G31_G32 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
9db5d21837 Move G30 to cpp 2017-09-21 16:26:51 -05:00
Scott Lahteine
13136376ee Move G27 to cpp 2017-09-21 16:26:51 -05:00