1daf2f3256
Number of extruders is not an advanced configuration - it is a basic property.
2013-03-02 16:14:19 +11:00
f1263d3f88
Further reduce code by using precompiler logic
2013-03-02 16:12:11 +11:00
140e095c6e
Add pins for Motherboard variant 64
...
These definition contain also the definition for the graphics LCD.
2013-03-01 17:47:32 +01:00
b2c1c64fb1
Add Motherboard variant 64 - STB V1.1
...
Definition for the graphic LCD are already in it, they will not harm the
configuration as they are only defined constants
2013-03-01 17:39:54 +01:00
ceb5ee38af
Replaced corrupted language.h file on local PC with current from ErikZalm/Marlin
2013-03-01 17:27:57 +01:00
8efd4cfd73
fixed merge conflict
2013-03-01 16:27:35 +01:00
b3ebb71704
Merge pull request #408 from STB3/Marlin_with_ATmega1284p_Sanguino_on_023_support
...
Marlin with ATmega1284p sanguino support under Arduino 023
2013-03-01 06:08:18 -08:00
372e12f83f
Implement automatic extruder/cold-end fan control based on temperature
...
This change allows fan outputs to automatically turn on/off when the
associated nozzle temperature of an extruder is above/below a threshold
temperature.
Multiple extruders can be assigned to the same pin in which case the fan
will turn on when any selected extruder is above the threshold.
It also makes the M42 command compatible with the M106/M107 command.
The majority of the logic in this change will be evaluated by the
compiler at build time (i.e, low code space requirements).
2013-03-01 21:57:23 +11:00
6beb42cdf6
Attempt to address Bernhard's comments
...
Refactor configuration to try to make items clearer (what defines a
panel vs what is user changeable).
2013-03-01 01:17:07 +11:00
f991bf23b2
Add bootloader files for ATmega1284/Sanguino
...
Added the optiboot bootloader, uses only 512kB of FLASH
Includes .hex file is for 20MHz µC Clock and serial speed of 57k6
2013-02-27 22:34:36 +01:00
5bfba7720e
Switched to Sanguino 0023r4
...
This is the actual Sanguino release for Arduino 023.
It has full ATmega1284p support.
Reference:
https://code.google.com/p/sanguino/downloads/detail?name=Sanguino-0023r4.zip&can=2&q=
2013-02-27 22:29:46 +01:00
a069d30a4b
Add additional Sanguino bard versions to boards.txt
...
ATmega644P 16MHz, ATmega1284p 8, 16, 20MHz
2013-02-27 22:17:42 +01:00
839bef6d5d
Fix Configuration.h file to not define LCDs be default.
...
Also fix compile time check in Marlin.pde
2013-02-28 02:32:20 +11:00
1292d735ba
Converge all I2C LCD branches (PANELOLU2, VIKI & PCF8575)
...
This includes refactoring the buttons code to remove a large amount of
non-pin dependent duplication from pins.h.
2013-02-28 02:04:51 +11:00
4eb81a69e6
Only compile the new extruder offset code if you have multiple extruders.
2013-02-27 12:32:07 +01:00
3e9cd334a4
Merge pull request #383 from dob71/jeff
...
Hotend offset handling for multi-extruder machines
2013-02-27 03:10:18 -08:00
67710df9f3
Made i2c mode wok with the hardware I am able to test (ywrobot / sainsmart i2c LCD 2004)
...
Removed incorrect LiquidCrystal_I2C Library
2013-02-26 22:22:12 +00:00
b6209c86dd
Added import of Wire Library to make I2C LCD support compilable
2013-02-25 15:15:23 +00:00
2b567d1df5
Added I2C port expander support to HD44780
2013-02-25 14:22:14 +00:00
06272f463d
Added Config variables for activating I2C LCDs and setting type and address
2013-02-25 14:14:46 +00:00
83e33bdd26
Added LiquidCrystal_I2C library to ArduinoAddons
2013-02-25 14:01:48 +00:00
de3dec7215
Also show the tune menu when USB printing.
2013-02-20 00:54:44 +01:00
73d41c10b9
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into jeff
...
Conflicts:
Marlin/language.h
Marlin/thermistortables.h
2013-02-18 12:10:52 -05:00
63da4dc59a
Merge pull request #398 from DanieleSdei/Marlin_v1
...
Marlin v1, alignment of the Italian language
2013-02-16 15:41:43 -08:00
7eb9811958
Merge pull request #397 from codenamepawel/patch-1
...
Update Marlin/language.h
2013-02-16 15:41:07 -08:00
82e28851bd
Italian language: SD-Card change and SD-Card init
2013-02-16 12:17:29 +01:00
aed5965ad8
Italian language: remove space and some fix
2013-02-16 12:14:50 +01:00
d360846dd4
Update Marlin/language.h
...
Update Polish language #define MSG_RESUMING "Wznawiam drukowanie"
2013-02-16 03:42:53 +01:00
2f60e324dc
Fixed #394
2013-02-14 14:04:26 +01:00
5e2abfcdcd
Merge pull request #391 from STB3/Marlin_with_SD-Card_Change_Menu
...
Add SD-Card change and SD-Card init. for electronics equipped with LCD Display
2013-02-13 08:56:00 -08:00
fa5c45f515
Merge pull request #392 from mfeherpataky/Marlin_v1
...
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-02-13 08:54:58 -08:00
a0d4e8e78e
Add Messages for SD Card init. & change
2013-02-13 10:05:18 +01:00
bbf0cc1379
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a bug that I just introduced - sorry. Forgot about offset of string length.
2013-02-12 20:06:51 +01:00
c8f1fbd9d8
Add SD-Card change and SD-Card init.
...
Add SD-Card change and SD-Card init. for reprap electronics without
SD-Chard change detect pin.
2013-02-12 17:35:46 +01:00
be91fb9b47
Merge pull request #389 from mfeherpataky/Marlin_v1
...
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
2013-02-12 07:56:15 -08:00
71ddb8dc60
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Use all available characters in narrow LCDs < 20 characters.
2013-02-12 00:03:40 +01:00
d2c547c407
Update Marlin/ultralcd_implementation_hitachi_HD44780.h
...
Fix to a minor bug with hardcoded LCD_WIDTH that draws edited values outside of the 16 characters width LCDs.
2013-02-11 23:25:24 +01:00
70871715e4
Added support for extruder offset handling
...
The extruder offset can be specified in the configuration
file or adjusted on the fly using the "M218 T# X# Y#" command.
The EEPROM support is not yet merged in.
The "T#" command can take option "F#" that specifies the feedrate
at which the printing head should be re-positioned. If not
specified the re-positioning move is not preformed immediately,
but the coordinates are adjusted for the printer to properly
position the head when the next movement happens.
2013-02-04 23:05:45 -05:00
49b2ddc8c1
Cleaned up non-standard characters
2013-02-04 01:41:40 -05:00
f8876a7958
Merge pull request #376 from kintel/skip_longfilenames
...
Also skip .files and _files with long filenames. I think its better than before. If somebody dislikes it, or wants additional configuration, it can be done in a future step. Thanks, Marius, and nice to have you helping!
2013-02-03 03:05:31 -08:00
18fcc367d2
Merge pull request #371 from Banjer/Melzi_LED_PIN
...
Chenged LED_PIN for Melzi boards, added comment about broken versions of...
2013-02-02 03:23:43 -08:00
6b78edf7c5
Merge pull request #374 from kintel/quickstop
...
compile fix: quickStop() needs stepper.h
2013-02-01 13:54:12 -08:00
19ce90fe02
Added comment about M42 usage (clean)
2013-01-31 18:20:23 +01:00
00fed0a703
Revert "Extended comment explaining M42 usage"
...
This reverts commit 01541ee64c
2013-01-31 18:11:13 +01:00
e06d820909
Also skip .files and _files with long filenames
2013-01-31 12:07:42 -05:00
01541ee64c
Extended comment explaining M42 usage
2013-01-31 18:00:25 +01:00
f24f02e212
compile fix: quickStop() needs stepper.h
2013-01-31 10:43:03 -05:00
12c41423ad
Fixed typo in comment
2013-01-30 22:54:04 +01:00
0995eaa492
Chenged LED_PIN for Melzi boards, added comment about broken versions of the Sanguino libraries
2013-01-30 22:25:01 +01:00
1d06b10962
Added a feature to have filament change by gcode or display trigger.
...
[default off for now]
syntax: M600 X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
if enabled, after a M600, the printer will retract by E, lift by Z, move to XY, retract even more filament.
Oh, and it will display "remove filament" and beep like crazy.
You are then supposed to insert a new filament (other color, e.g.) and click the display to continue.
After having the nozzle cleaned manually, aided by the disabled e-steppers.
After clicking, the printer will then go back the whole shebang, and continue printing with a fancy new color.
2013-01-27 13:21:34 +01:00
