Cleaned up non-standard characters

This commit is contained in:
Denis B 2013-02-04 01:41:40 -05:00
parent f8876a7958
commit 49b2ddc8c1
2 changed files with 3 additions and 3 deletions

View File

@ -124,7 +124,7 @@
// M500 - stores paramters in EEPROM
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
// M503 - print the current settings (from memory not from eeprom)
// M503 - print the current settings (from memory not from eeprom)
// M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
// M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
// M907 - Set digital trimpot motor current using axis codes.

View File

@ -248,7 +248,7 @@ const short temptable_6[][2] PROGMEM = {
{970*OVERSAMPLENR, 25},
{978*OVERSAMPLENR, 22},
{1008*OVERSAMPLENR, 3},
{1023*OVERSAMPLENR, 0} //to allow internal 0°C
{1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
};
#endif
@ -309,7 +309,7 @@ const short temptable_7[][2] PROGMEM = {
{994*OVERSAMPLENR, 15},
{1001*OVERSAMPLENR, 10},
{1005*OVERSAMPLENR, 5},
{1023*OVERSAMPLENR, 0} //to allow internal 0°C
{1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C
};
#endif
#if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)