From 49b2ddc8c1972735f22fc98804a2cc1f5924ba7a Mon Sep 17 00:00:00 2001 From: Denis B Date: Mon, 4 Feb 2013 01:41:40 -0500 Subject: [PATCH] Cleaned up non-standard characters --- Marlin/Marlin_main.cpp | 2 +- Marlin/thermistortables.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 39efdf4545..355e08b9fe 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -124,7 +124,7 @@ // M500 - stores paramters in EEPROM // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -// M503 - print the current settings (from memory not from eeprom) +// M503 - print the current settings (from memory not from eeprom) // M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) // M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] // M907 - Set digital trimpot motor current using axis codes. diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index cfa469735e..76ea32b7ba 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -248,7 +248,7 @@ const short temptable_6[][2] PROGMEM = { {970*OVERSAMPLENR, 25}, {978*OVERSAMPLENR, 22}, {1008*OVERSAMPLENR, 3}, - {1023*OVERSAMPLENR, 0} //to allow internal 0°C + {1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C }; #endif @@ -309,7 +309,7 @@ const short temptable_7[][2] PROGMEM = { {994*OVERSAMPLENR, 15}, {1001*OVERSAMPLENR, 10}, {1005*OVERSAMPLENR, 5}, - {1023*OVERSAMPLENR, 0} //to allow internal 0°C + {1023*OVERSAMPLENR, 0} //to allow internal 0 degrees C }; #endif #if (THERMISTORHEATER_0 == 8) || (THERMISTORHEATER_1 == 8) || (THERMISTORHEATER_2 == 8) || (THERMISTORBED == 8)