cf7c8c458f
Fixed MAX6675
2012-04-10 21:57:57 +02:00
325f0651ac
Merge pull request #136 from grrf/patch-1
...
This breaks temperature readout for pronterface!
2012-04-10 09:48:45 -07:00
03b0850e63
This breaks temperature readout for pronterface!
2012-04-09 23:37:34 +03:00
2a019a53d2
Merge pull request #134 from tgiphil/Marlin_v1
...
- Fixed a typo
2012-04-08 05:16:29 -07:00
ad8bc71d3e
- Fixed a typo
2012-04-07 20:01:31 -07:00
46feae79c6
Fixed typo in arc
2012-04-02 17:19:20 +02:00
4ca2f336f0
Changed default MINIMUM_PLANNER_SPEED -> 0.05
...
Fixed small bug in arcs
M105 prints now actual_temp/target_temp
2012-04-01 16:23:40 +02:00
ae0bf8068b
Fixed arc offset.
2012-03-27 19:03:33 +02:00
0c1b863755
Ignore ":" in comments.
2012-03-25 14:41:26 +02:00
63aec3c56e
Replaced Kill by Stop. If the printer is stopped. Fix the error and use M999 to restart.
...
Moved the PID_dT in the Ki and Kd calculation from the configuration.h to temperature.cpp
2012-03-25 14:36:51 +02:00
8b785f75a6
Merge pull request #123 from buserror-uk/for-upstream
...
For upstream
2012-03-23 11:54:58 -07:00
5b8758f42b
Merge pull request #126 from tommycheng/patch-1
...
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined...
2012-03-23 11:54:37 -07:00
520f1a54a8
Fix compilation error when PIDTEMP is undefined and ULTIPANEL is defined.
2012-03-24 02:26:59 +08:00
5550e893d5
New board variant, Open Motion Controller
...
Open Hardware board currently used by the group build of http://tvrrug.org.uk
The board can be found at http://solderpad.com/folknology/open-motion-controller/
Signed-off-by: Michel Pollet <buserror@gmail.com >
2012-03-22 13:51:21 +00:00
aa6e6e914e
Makefile: Redone
...
+ Removed most explicit pathnames, use the standard make "VPATH" to let
make find the files for itself.
+ Added a "hardware variant" variable that allows compiging Sanguino and
Gen7 as well as "generic" arduino.
+ Allows overriding the MOTHERBOARD define from the Makefile
+ Removed the 'preprocessor' bit that wasn't needed, now just "include" the
files that are needed, since it allows gcc to show the right file/line
when displaying error/warnings.
+ Uses gcc's own dependency generator to generate the .d files, and
and include these instead of self-patching the makefile
Signed-off-by: Michel Pollet <buserror@gmail.com >
2012-03-22 13:48:10 +00:00
0183e6332a
made prepare->autostart independent of current folder.
2012-03-19 20:24:40 +01:00
1532200435
found error in filenames.
...
One array was too short. This had nothing to do with long filenames, other than if they were 12 characters exactly, which could only happen if the extension and the text before were filled completely
2012-03-19 20:06:58 +01:00
7f775c142c
Update README.md
2012-03-18 15:59:14 +01:00
b985e4a134
Fixed compile errors in ultralcd when no ultra_lcd is selected.
2012-03-15 22:29:31 +01:00
2e749d60c3
Added DISABLE_MAX_ENDSTOPS
2012-03-12 20:32:14 +01:00
33f5697888
PPID tune exports more constants.
2012-03-11 22:18:25 +01:00
b44055cc51
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-03-11 18:03:00 +01:00
f5eae52098
Added more manage_inactivity checks
2012-03-11 17:59:44 +01:00
19a47dae4a
Merge pull request #99 from Justblair/master
...
Better pin configuration for rotary encoder in RAMPS boards
2012-03-11 04:34:59 -07:00
910f4e77a2
Added 20MHz support.
2012-03-11 12:25:04 +01:00
7cefad3744
Merge pull request #106 from bgamari/Marlin_v1
...
Make F_CPU dependence of stepper.cpp more explicit
2012-03-11 01:48:30 -08:00
87ff2f8867
Added CONTROLLERFAN. (Controlling a fan to cool down the steppper drivers)
2012-03-11 10:44:10 +01:00
387fe51a56
Do not disable steppers when there are moves in the queue.
2012-03-09 20:20:01 +01:00
421264e58a
Fixed typo
2012-03-09 17:49:48 +01:00
15ad923310
Removed !!!. Stupid arduino bootloader can't handle this.
2012-03-09 17:42:32 +01:00
61e09e6be2
Added FAN_PIN -1 checks
2012-03-08 22:09:49 +01:00
87c4e06c24
Corrected active_extruder when autotemp is used.
2012-03-08 22:04:13 +01:00
7b1e295f34
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-03-08 21:48:06 +01:00
c077316b2b
Added PID autotune. (experimental)
...
M303 Starts autotune. Wait till the Kp Ki and Kd constants are printed.
Put these values in Configuration.h
2012-03-08 21:43:21 +01:00
49b228c4b3
Add instructions to regenerate speed_lookuptable when changing F_CPU
2012-03-07 18:11:03 -05:00
96509494f0
stepper: Clarify comment on timer-counter configuration
2012-03-07 18:11:01 -05:00
6d7e6a11fc
Add create_speed_lookup
2012-03-07 18:11:01 -05:00
f3095493b0
Merge pull request #100 from tommycheng/patch-1
...
While Waiting for hotbed to warm up via M190, LCD Display and Click Enco...
2012-03-05 09:56:50 -08:00
ce07c9186d
While Waiting for hotbed to warm up via M190, LCD Display and Click Encoder input freeze until target temperature is reached.
2012-03-05 23:12:26 +08:00
116dc86b8a
Fixed type in e-jerk
2012-03-04 23:09:13 +01:00
02ee9e3d30
Changed Pin Assignment for the RAMPS motherboard so that LCD and Rotary encoder are all wired to AUX-4
...
This simplifies wiring for those with RAMPS 1.3 and 1.4 boards.
2012-03-04 21:34:20 +00:00
e056bf8081
Added E-Jerk
2012-03-04 16:34:58 +01:00
4deeffbc88
Added missing defines to the german section.
...
Translation still needed.
2012-03-04 14:08:20 +01:00
632528aa95
merging with SCUBA82
2012-03-04 13:41:47 +01:00
aac7aa3bf0
Queued fan control. Issue #90
2012-03-04 13:05:26 +01:00
fde51084f3
set SD file delete to M30; switch printime output to M31
2012-03-03 21:58:12 +01:00
21e2bae063
Changed (corrected?) SD_card comment handling.
2012-03-03 21:28:33 +01:00
e509bbf636
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-03-03 20:41:22 +01:00
072011a3ef
Added current_block = NULL to quickStop()
2012-03-03 20:40:46 +01:00
2422a857a1
Merge pull request #96 from haxar/Marlin_v1
...
make analog2tempBed return a precise celsius reading for BED_USES_THERMISTOR, ...
2012-03-03 11:24:58 -08:00
