cf749dbeda
Completed SORT_USES_MORE_RAM implementation
...
For the MORE_RAM option we need to buffer both the short and long
names, even though long names are sometimes redundant. Worst case, all
the names are max length. We can save some RAM by not storing these. We
could save more RAM by only storing the visible part of the long name.
2014-12-13 06:03:39 -08:00
ae081d0fe0
Improvements, more SORT_USES_MORE_RAM
...
With this option, always keeps the dir in RAM, doubling as a cache for
getfilename. A board with only 8K of SRAM is cutting it very close.
2014-12-13 06:03:39 -08:00
785143a013
Expand on More RAM concept, address minor bugs
2014-12-13 06:03:39 -08:00
0cbbba08bd
SD Card Alpha Sorting
...
First iteration of alphabetical sorting for SD cards, both
slow+efficient and fast+rammy. Option for folders to sort first, last,
or not at all.
2014-12-13 06:03:39 -08:00
3ebfd29312
Print a message when printing is aborted
...
Messages in gcode files like “M117 Printing…” were not being cleared on
Stop Print.
2014-12-13 06:01:46 -08:00
2ef0669b19
Split do_blocking_move() to XY and Z sections to make sure that the Z homing feedrate is not exceeded
2014-12-07 15:31:46 +00:00
64139f5e5a
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-12-04 21:09:03 +00:00
edfcf3b527
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 15:01:52 +01:00
c429a4b3ec
Toshiba Stepper Driver support
...
Tosh stepper drivers need to be driven slower, so the stepper code
was interleaved to separate the pin HIGH from the pin LOW. This adds
enough instructions to make it work, without needing nops.
2014-12-03 14:37:16 +01:00
1977b4490f
Merge pull request #1159 from thinkyhead/lcd_wait_better
...
M0/M1 Message Fix
2014-11-28 16:44:29 +00:00
7562183efc
Skip over spaces first
2014-11-28 08:09:28 -08:00
5a8b3a84ae
Merge pull request #1155 from thinkyhead/lcd_wait_better
...
M0-M1 Enhancements
2014-11-28 11:01:24 +00:00
433ac29d31
Updated a bit of spanish language
2014-11-27 22:02:49 +01:00
12b51d6060
Ignore S and P if no value >0 is included.
2014-11-26 21:05:11 -08:00
d12b24758a
Clear LCD to welcome_msg if not printing
...
The welcome message is more appropriate than “resuming print” if
nothing is printing.
2014-11-26 21:05:11 -08:00
3f54c9ba33
Relocate click ignore code into info screen
2014-11-26 21:05:10 -08:00
92e21d3ee2
M0-M1 Enhancements
...
Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
2014-11-26 21:05:10 -08:00
0d35b1d0b8
Allow negative values in menus
2014-11-25 18:34:02 +08:00
0d97dec434
Adaption of LCD info screen
...
Here comes a compile-time operation to match the extruder symbols on the
info screen to the set number of extruders in configuration.h.
When only one extruder is selected, the "1" on the symbol will not be
displayed.
2014-11-12 17:10:48 +01:00
3b1ab84536
Display Filament Sensor data on graphic LCD
...
Added support to show the filament width on the status line of the
graphic LCD. The status will show for 5 sec and then switch over to
data. Status can be seen by clicking the button.
2014-11-10 21:46:37 -06:00
d84934d8c5
Display Filament Sensor data on 20x4 LCD
...
Changes to support displaying the real-time filament width and the
volume factor on a 20x4 LCD. The data is displayed on the 4th line.
First the status message is displayed for 5 seconds, and then the
filament data is displayed. The status message can be seen by
re-selecting the info screen in the menu.
2014-11-10 21:43:58 -06:00
5c8107bcdd
Commented out FILAMENT_SENSOR #define
...
Commented out the FILAMENT_SENSOR define so that it is not enabled by
default. Code does not work on all hardware variants.
2014-11-09 13:26:02 -06:00
377dfb182f
Updated example configurations for Delta printers
2014-11-02 21:04:54 +00:00
b81021f475
Merge https://github.com/ErikZalm/Marlin into Marlin_v1
2014-10-21 12:06:56 +01:00
724197454c
Merge pull request #1104 from ch100/Marlin_v1
...
Fixed typo.
2014-10-11 23:10:00 +02:00
058e446531
Merge pull request #1037 from filipmu/Filament-Sensor
...
Support for a filament diameter sensor
2014-10-11 22:56:01 +02:00
110c5dcf23
Fixed typo.
...
Signed-off-by: Christian Inci <chris.pcguy.inci@gmail.com >
2014-10-11 00:25:36 +02:00
ca30aee903
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 00:16:27 -04:00
0733825fb1
Merge pull request #1099 from Fourmi/Marlin_v1
...
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
af3e4d7510
Update line 627 ,wrong number on thermistortables
...
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
aaaf8fe8dd
Merge pull request #1068 from darkjavi/Marlin_v1
...
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
b360306881
Merge pull request #1073 from WingTangWong/wing-fix-float-delta
...
Wing fix float delta
2014-10-06 13:41:01 +02:00
ce85515428
Merge pull request #1082 from Fourmi/Marlin_v1
...
Add thermistor table
2014-10-06 13:39:36 +02:00
764921bdbf
Merge pull request #1091 from Aldert/patch-1
...
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
c40c7b589b
Merge pull request #1095 from thinkyhead/codeclean
...
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
0f2e0525df
Merge pull request #1096 from thinkyhead/set-home
...
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
5ae02a361b
Merge pull request #1097 from thinkyhead/round-up-xyz
...
Adjust the Z display to hide float rounding errors
2014-10-06 13:35:00 +02:00
fb34265d75
Make hotend optional when compiling with lcd support
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com >
2014-10-06 00:19:07 -04:00
6e343ef2f0
Adjust the Z display to hide float rounding errors
2014-10-05 18:34:54 -07:00
2f6c57eadc
Proposed feature: Set Home Offsets
...
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
f989bd5435
Simple code cleanup. Rename "homeing" to homing.
2014-10-05 13:20:53 -07:00
6c5a460e65
Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1
2014-10-05 12:54:54 +01:00
d1e4237e1d
Update motion_control.cpp
...
G03 Full circle did not work (G02 is working correct)
2014-10-04 09:24:09 +02:00
a664763e6f
Update thermistortables.h
...
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"
Thx
2014-09-27 09:05:10 +02:00
b5dc228a7a
Update configuration.h
...
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
2014-09-27 09:02:58 +02:00
3cbb2f56c6
Update configuration.h
...
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?
Thx
2014-09-26 22:01:06 +02:00
c35736a140
Update thermistortables.h
...
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
cb4a6dd2dc
Merge pull request #1065 from oliasmage/Marlin_v1
...
Corrected retract() call for use of auto probe without sled enabled.
2014-09-19 15:12:09 -04:00
01e9b536cb
Fix build for non-sled bed auto levelling
...
This function should only be used with sled, not all bed auto
levelling.
2014-09-19 19:42:32 +01:00
58eabd21fb
Added ifndef
2014-09-16 14:31:58 -07:00
