764f0d9c1c
STM32F1: Servo "soft" PWM via timer interrupt ( #14187 )
2019-06-07 07:11:48 -05:00
e3a468f2cd
STM32F1: FSMC only on chips with 100/144 pins ( #14180 )
2019-05-30 15:51:02 -05:00
24b1818245
Secure STM32F1 servo code and M280 detach ( #14085 )
2019-05-22 16:57:19 -05:00
a74aad3b4a
Clean up HALs / FastIO ( #14082 )
2019-05-21 18:28:12 -05:00
402f1f7307
STM32F1: STM32_HIGH_DENSITY is auto defined in HAL ( #14057 )
...
- Fix the `fsmc` and `sdio` units which required hard defines for use.
2019-05-18 20:45:22 -05:00
256f810df2
Add open-drain output mode to STM32F1 FastIO ( #14050 )
...
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
2019-05-18 16:12:00 -05:00
0b056970c6
Fix file.open in STM32 eeprom emu
2019-05-17 18:26:53 -05:00
d7b0369e39
STM32: Fix SD EEPROM emulation conflict ( #14012 )
2019-05-15 02:42:10 -05:00
8075893352
STM32: fix sdcard filename conversion
2019-05-12 04:26:21 +02:00
93dd097b1c
Use E2END, if defined, for STM32F1 (SD) ( #13981 )
2019-05-11 18:22:31 -05:00
62b36d1b98
Fix STM32 timer warnings ( #13946 )
2019-05-10 20:00:21 -05:00
ad4ffa1d2f
Use C++ language supported 'nullptr' ( #13944 )
2019-05-09 11:45:55 -05:00
e53d7e5517
STM32: ADC warning fix ( #13933 )
2019-05-09 00:33:38 -05:00
a4c24511f7
STM32: Fix Marduino SBI/CBI redefine ( #13912 )
2019-05-05 22:06:30 -05:00
e7682eea42
Use Arduino.h include wrapper ( #13877 )
2019-05-02 00:45:50 -05:00
c8a83fb122
SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA
2019-04-08 18:13:41 -05:00
6d9aaca082
Fix compilation error for MKS Robin ( #13506 )
2019-03-29 12:40:24 -05:00
e40636a7c1
Replace digitalPinHasPWM with HAS_TIMER ( #13520 )
2019-03-29 12:21:14 -05:00
ffc2c2d7c5
Move FAST_PWM_FAN code to HALs ( #13491 )
2019-03-26 01:03:23 -05:00
ef3b93daa1
Fix STM32F1 SD-based EEPROM emulation ( #13475 )
...
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
2019-03-24 20:07:31 -05:00
380c771988
Handle word-padded flash-based eeprom (STM32F1)
...
Fix #13445
2019-03-24 19:14:04 -05:00
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
67bee06e43
No patch needed for non-libmaple analogWrite
...
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
2019-03-13 07:21:10 -05:00
f89b375fb9
Fixes and improvements for PWM pins ( #13383 )
2019-03-13 06:51:15 -05:00
6214c997c0
Remove includes of <binary.h>
2019-03-13 05:32:33 -05:00
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
2212da453a
Distinguish between analog/digital auto fans ( #13298 )
2019-03-05 00:41:31 -06:00
4200f9ed62
Hide freeMemory et.al. warnings
2019-02-26 18:03:00 -06:00
631d867dc9
HAL cleanups
2019-02-20 06:27:26 -06:00
3a1b6fe8c1
Coding standards
2019-02-19 14:58:39 -06:00
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
d9a3fea022
Comments in HAL_spi_STM32F1.cpp
2019-02-11 18:06:33 -06:00
8f9b246d0e
Tweak some formatting, replace tabs
2019-01-24 13:18:56 -06:00
3e867008f0
Fix some HAL_STM32F1 type declarations
2019-01-12 16:21:11 -06:00
a403d9a50c
Improve menu pause / resume ( #12876 )
2019-01-11 20:42:11 -06:00
d372e7e477
SDIO support for STM32F1 ( #12782 )
2019-01-04 13:38:07 -06:00
813a4ea107
Add support for Mks Robin TFT display ( #12706 )
...
* Add support for MKS Robin TFT display
- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
c4237b529f
Fix MKS Mini and SD card conflct over SPI mode ( #12783 )
2019-01-03 10:27:53 -06:00
01f75591c6
Fix GTM32_PRO_VB Serial and HAL via watchdog ( #12753 )
...
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
2019-01-03 09:46:49 -06:00
7557f8d68c
Rename all Stm32f1 to STM32F1 ( #12639 )
2018-12-31 16:36:49 -06:00
33abb86b7e
Add support for MKS Robin board ( #12650 )
...
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
2018-12-20 17:23:27 -06:00
66580f32c2
Make CardReader class static ( #12451 )
...
* Make CardReader a static class
* Make CardReader flags into bitfields
2018-11-16 22:39:16 -06:00
b3b4e6dc45
Change Marlin debug flag names to fix conflicts ( #12340 )
...
In reference to #11000
2018-11-05 22:48:28 -06:00
f5eab912ed
Apply #pragma once, misc cleanup ( #12322 )
...
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
2018-11-04 02:25:55 -06:00
