Commit Graph

294 Commits

Author SHA1 Message Date
Marcio Teixeira
7ccbcf2eaa Fix TMC EEPROM regression (#14008)
Partially undo 15357af to ensure TMC code is initialized in the proper order.
2019-05-16 20:38:03 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
Scott Lahteine
23ec650410 Consolidate Malyan LCD and ExtUI 2019-05-07 21:31:30 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659)
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
2019-05-03 23:53:15 -05:00
Scott Lahteine
e7682eea42
Use Arduino.h include wrapper (#13877) 2019-05-02 00:45:50 -05:00
InsanityAutomation
610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
Scott Lahteine
321a5e6580
Fix SD card reselect when scrolled (#13624)
- Change encoder position to 16-bit integer.
- Fix `SD_REPRINT_LAST_SELECTED_FILE` when the screen is scrolled.
2019-04-08 21:10:41 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print (#13616) 2019-04-08 13:44:35 -05:00
Robby Candra
81c2c3ec11 Continuous filename scrolling (#13609) 2019-04-07 16:58:32 -05:00
Scott Lahteine
58bca67883 Unify status scrolling further 2019-03-17 07:56:35 -05:00
Scott Lahteine
c4443f885e finishstatus => finish_status 2019-03-17 07:56:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
7eggert
10c8c034bd Allow both encoder and ADC keypad (#13355) 2019-03-11 18:10:56 -05:00
Marcio Teixeira
00fc43144a Follow up fixes to various PRs. (#13334)
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
2019-03-09 14:20:37 -06:00
revilor
e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Jiri
24fffb8d93 Fix undefined lcd_tmpfan_speed on NO_LCD_MENUS (#13006) 2019-01-24 16:34:40 -06:00
lanserge
c2cf8ffa82 Add support for Arduino DUE Shield Kit (#12950) 2019-01-19 23:43:32 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Scott Lahteine
e6484d9dab Return to status when SD card is removed 2019-01-10 15:43:31 -06:00
Kaushik Vemparala
ba7e35cbab Add LCD option BEEP_ON_FEEDRATE_CHANGE (#12774) 2019-01-04 19:30:08 -06:00
Marcio Teixeira
902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
Scott Lahteine
2224a4d61a Remove AVR-only MARLIN_DEV_MODE code 2018-11-30 17:54:24 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars (#12543) 2018-11-27 21:15:52 -06:00
Scott Lahteine
fd2998efd5
Revert ADC_KEYPAD direction behavior (#12508) 2018-11-22 06:00:00 -06:00
Scott Lahteine
c5642a894f
Fix ADC_KEYPAD middle button (#12493) 2018-11-20 21:39:30 -06:00
Scott Lahteine
4def8b3b5e Expanded options for _Statusscreen.h (#12455)
See the PR for full details. The updated system will be documented on the website in the near future.
2018-11-20 07:50:37 -06:00
Scott Lahteine
817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Marcio Teixeira
50ee747787 Fix compilation errors. Followup to #12439 (#12481) 2018-11-20 00:02:13 -06:00
Ludy
1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine
7f225b9421 Fix MAX_MESSAGE_LENGTH 2018-11-18 01:11:26 -06:00
Scott Lahteine
06674a321a Remove extra include 2018-11-18 00:34:07 -06:00
Marcio Teixeira
c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Ludy
93e958f695 Fix compile error with ZONESTAR_LCD+NO_LCD_MENUS (#12466) 2018-11-17 21:21:30 -06:00
Scott Lahteine
3e9ffaddb6
Consolidate, optimize some LCD menu code (#12450) 2018-11-16 21:44:48 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430)
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
2018-11-14 13:13:51 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine
54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Marcio Teixeira
3ceab8474c Add required "cardreader.h" include (#12419) 2018-11-13 17:12:44 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414)
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
2018-11-13 01:47:45 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395)
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
2018-11-11 12:16:24 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder (#12387)
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
2018-11-10 18:07:38 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine
488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Scott Lahteine
3866aeac52 Clean up ENCODER_RATE_MULTIPLIER config 2018-11-05 04:17:37 -06:00
Scott Lahteine
8014e1cc9d Allow disable of LCD_TIMEOUT_TO_STATUS (when 0) 2018-11-04 18:30:10 -06:00