Commit Graph

9671 Commits

Author SHA1 Message Date
Scott Lahteine
27cbb939b2 Clean up some HAL code 2017-08-31 18:36:53 -05:00
Christopher Pepper
b29b66feda Temporary fix for odd stepper behaviour with servos 2017-08-31 18:33:07 -05:00
Christopher Pepper
8afe13b1a2 Fix compile issue when watchdog was disabled 2017-08-31 18:33:07 -05:00
Christopher Pepper
b908e38d08 Add needed platform defined gaurds to compile with Arduino IDE
Also removed explicit platform HAL directory inclusion from platformio.ini to make sure these errors are caught by Travis in the future
2017-08-31 18:33:07 -05:00
Scott Lahteine
a037ddbf7b Other spacing tweaks 2017-08-31 18:33:07 -05:00
Scott Lahteine
2af62a5d8d Apply spacing, const to some HAL code 2017-08-31 18:33:07 -05:00
kfazz
fa9ff6be6e try to fix LIN_ADVANCE for 32bit 2017-08-31 18:33:07 -05:00
kfazz
18f97c4013 add HardwareSerial and SoftwareSerial for Re-ARM.
HardwareSerial has been tested on Uart0 (debug header) and Uart3 (i2c connector)
Software Serial has been tested to work bi-directionally at 9600 and 115200
using pins 6 and 63 on J5, and unidirectionally (write only) at 250000.
The code used to test was Teemuatlut's tmc2208 patch, and a few small changes to main used to echo recieved chars back to a host pc.
2017-08-31 18:33:07 -05:00
Bob-the-Kuhn
01fb45b4f8 hybrid PWM system
Uses PWM1 to directly control pins 4, 6 & 11 (servo 0, 1 & 3) and PWM1
generated interrupts to control other pins.

Interupt control of the servo pins had too much jitter so switched all
that we could to PWM1 direct control.  The PWM1 direct control pins have
less than 1 microsecond pulse width jitter while the interrupt
controlled ones can have 20+ microseconds of jitter.

Also added insurance to the servo code in the "disable servo after move"
section.
2017-08-31 18:33:07 -05:00
Tannoo
94dd39b3b7 LCD_UBL_memory_slot_corrections (#7516)
* LCD_UBL_memory_slot_corrections

Changed the memory slot edit function to work with the
`settings.calc_num_meshes()`

* Add a little more safety margin...

* More corrections

Error handling when the EEPROM is not available.
2017-08-31 18:33:07 -05:00
Roxy-3D
8587c4e1ec Minor corrections to 32-bit branch (#7514)
Mostly...  clean up some compile time warnings for the 20x4 LCD Display.
2017-08-31 18:32:09 -05:00
Bob-the-Kuhn
7342d5c07a ST7565 2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
97444391e0 Servo & PWM support for LPC1768 (#7500) 2017-08-31 18:31:43 -05:00
Tannoo
859fa35287 Re-Arm bugfixes (#7495)
* UBL_correction

* RGB Map function
2017-08-31 18:31:43 -05:00
Scott Lahteine
622b80974c Add VSCode to .gitignore 2017-08-31 18:31:43 -05:00
Bob-the-Kuhn
d80877d570 Set pinMode with every digitalWrite (legacy compatibility) 2017-08-31 18:31:07 -05:00
Chris Pepper
9a950e3a5a Update the delay functions and change the default pinmap for character displays (#7434) 2017-08-31 18:31:07 -05:00
Scott Lahteine
105324b85b Match the license headers in other files 2017-08-31 18:31:07 -05:00
Dave Johnson
d5e5735679 Support travis new "trusty" build environment
move from legacy precise to trusty build image
fix PATH not including buildroot/bin
remove symolic link to ~/bin as trusty travis image doesn't include it in PATH anyway
2017-08-31 18:31:07 -05:00
Dave Johnson
8f5a576b08 pristine != precise (#7424) 2017-08-31 18:31:07 -05:00
Dave Johnson
419e575808 Force legacy "pristine" build dist for TravisCI
TravisCI "trusty" build dist isn't picking up build path causing travis checks to fail.  Reverting to legacy "pristine" dist while we investigate
2017-08-31 18:31:07 -05:00
Bob-the-Kuhn
69704b93f2 ultralcd.cpp fix compile error - switch to int16_t 2017-08-31 18:31:07 -05:00
Chris Pepper
61c0a10efe Revert "SPI API platform implementation stubs" (#7416)
This reverts commit 2dfa6ca72a2e8d43caf4932ca0d35792f0638917.

Revert "Base HAL SPI Changes"

This reverts commit 2afc521b8b6a81b2281a038f1b99a69f4a008e64.

Revert "Initial HAL SPI API"

This reverts commit 58f7ffe09ab5bc034b6510f5204f8d342138abaa.
2017-08-31 18:31:07 -05:00
Chris Pepper
a5cf3a190c bugfix-2.0.x critical fix (#7401)
* Fix mistake in gitignore file and add in missing core files.

The missing leading slash on "lib" meant all folders names lib in the directory tree are ignored, rather than just the top level PlatformIO lib folder

* Add LiquidCrystal Library and associated headers modified to compile.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
76da81c1de minimize SD card reads when using SDCARD_SORT_ALPHA (Re-ARM board)
Because of the Re-ARM card's pinout there is only one SPI connected to
the RepRap Discount Full Graphic LCD display.  The LCD responds to ANY
SCK transitions no matter if it's enable is inactive.  The result is
garbage (usually bars) on the LCD display whenever there is SD card
activity.

This code minimizes this by only accessing the SD card when changing
directory levels if :
SDCARD_SORT_ALPHA is enabled
SDSORT_USES_RAM is true
SDSORT_CACHE_NAMES is true

The code changes result in file names being pulled from the ALPHA SORT
memory array rather than the SD card.

The code also gives the file count and file index functions their own
variables.  When they shared a common variable the index function
sometimes resulted in the file count being short by 1.

=======================================================================

cardreader.cpp & pins_RAMPS_RE_ARM.h changes

Added another condition to cardreader.cpp to enable getting file names
only from RAM.

pins_RAMPS_RE_ARM.h :
Added comments about the SD card accesses and the LCD display
Combined all versions into this one.
2017-08-31 18:23:44 -05:00
Bob-the-Kuhn
84a11cfedc HAL compatible pinsDebug & misc
Re-ARM has been tested.  AVR has not been tested.

1) moved all cpu specific items to files in the low level HAL directory
for that CPU (pinDebug_Re-ARM.h & pinsDebug_AVR_8_bit.h

2) added pinsDebug.h to the top level directory

3) modified HAL_pinsDebug.h to select the correct support file for the
selected CPU

4) Patched sanitycheck to stop throwing false errors.  A long term
solution will be done

5) misc changes & bug fixes
arduino.cpp - included macros.h to fix a missing definition
pinmap_re-arm.h - removed a duplicated line.
pinmapping.h - changed from "ENABLED" to "defined" to fix a compile
error

======================================================================

split SanityCheck up, improve pinsDebug system

======================================================================

switch to latest pins_RAMPS_RE_ARM.h
2017-08-31 18:23:44 -05:00
Christopher Pepper
32e759c928 SPI API platform implementation stubs 2017-08-31 18:23:44 -05:00
Christopher Pepper
4183a249b6 Moved CMSIS and other LPC1768 dependencies
Fixes Arduino IDE builds for 8-bit AVR,
misc: Adafruit NeoPixel currently incompatible with Teensy 3.5-6, blacklisted
2017-08-31 18:23:44 -05:00
Christopher Pepper
b55295ad33 Post merge fix
Add macros.h to allow Enabled macro, also need to reference include files directly
2017-08-31 18:23:44 -05:00
Christopher Pepper
d2fb3215da PlatformIO Travis test
spi.h renamed to avoid conflicts with base libraries
2017-08-31 18:23:44 -05:00
Christopher Pepper
c66d1ac651 Debug Pins Support 2017-08-31 18:21:38 -05:00
Christopher Pepper
a31e32969f Base HAL SPI Changes 2017-08-31 18:21:38 -05:00
Christopher Pepper
bcd050f33b Initial HAL SPI API 2017-08-31 18:21:38 -05:00
Christopher Pepper
44b0c186a6 HAL for Re:ARM (LPC1768) architecture 2017-08-31 18:21:38 -05:00
teemuatlut
f3e562e46e HAL for 32-bit Teensy (3.5, 3.6) architecture 2017-08-31 18:15:07 -05:00
Christopher Pepper
cfef925559 HAL for DUE architecture 2017-08-31 18:15:07 -05:00
Christopher Pepper
4b16fa3272 Implement HAL and apply macros across code-base
Implement AVR Platform
2017-08-31 18:14:31 -05:00
Christopher Pepper
fb04dfcda8 Apply Travis update workaround while a permanent solution is found 2017-08-31 17:56:08 -05:00
Scott Lahteine
e4fcf460e7 Marlin bugfix-2.0.x Version/README 2017-08-31 17:56:08 -05:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
41e4de62b3 Merge pull request #7592 from thinkyhead/bf1_workspace_planes
CNC workspace planes for G5
2017-08-31 15:18:15 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564)
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
Scott Lahteine
9721c77fb9 Merge pull request #7577 from thinkyhead/bf1_creality_fix
Fixes required for Creality CR-10
2017-08-27 20:51:15 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563)
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00