bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
11,467 Commits 1 Branch 4 Tags 151 MiB
0a638cc022
Commit Graph

294 Commits

Author SHA1 Message Date
Scott Lahteine
0a638cc022 Adjust Formbot Raptor pins 2018-11-25 18:35:45 -06:00
Marcio Teixeira
7109dadd21 Additional pin definitions for Archim 2 (#12500) 
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
 2018-11-22 01:07:02 -06:00
Scott Lahteine
b738972e69 General cleanup of Re-ARM pins 2018-11-21 19:00:49 -06:00
Ludy
1f93d2bcf7 Fix LCD compile error, etc. (#12472) 2018-11-18 20:39:49 -06:00
Scott Lahteine
9d13f07d09 GTM32 Pro VB changes from Markku Sinisalo 2018-11-18 19:56:38 -06:00
Nils Hasenbanck
779b2709ec Change temperature pin order for RemRam V1 (#12458) 
Beta testers suggested to adopt the RAMPS order of temperature probe connectors. This commit fixes the order to the RAMPS order.
 2018-11-17 16:51:06 -06:00
Ph0non
984c4ba8c7 Enable SD Card on RepRap Display and RADDS (#12446) 
* Enable SD Card on RepRap Display and RADDS

Define the necessary pins in `pins_RADDS.h` (copied from the `RADDS_DISPLAY` section) for the use of the SD card slot on RRD.
 2018-11-17 06:59:40 -06:00
Mateusz Krawczuk
ca21ac6b9b Support two MAX6675 thermocouples (#8686) 2018-11-16 18:20:33 -06:00
Scott Lahteine
edfd106bc5
Rejigger Filament Runout class (#12428) 2018-11-14 11:45:57 -06:00
Scott Lahteine
f4c128ecaa
Move RRW keypad code to a common method (#12429) 2018-11-14 06:00:21 -06:00
Scott Lahteine
ebf585b673 Fix an old sanity check 2018-11-14 01:15:35 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine
664e20754d Clean up pins files 2018-11-14 00:23:33 -06:00
Scott Lahteine
4ed6397e5d
More comprehensive NO_LCD_MENUS (#12367) 2018-11-09 00:07:16 -06:00
Scott Lahteine
9c8f083d6c Extend pins errors to include the processor 2018-11-08 22:25:59 -06:00
Scott Lahteine
147e270208 Restore GTM32_PRO_VB temp and heater pins 
Undo #12345
 2018-11-06 21:41:30 -06:00
Phr3d13
a813900fce Add Geeetech Rostock 301 config, update GTM32 Pro VB pins (#12345) 2018-11-05 22:42:06 -06:00
Scott Lahteine
c536ee1122 Clean up bq Zum Mega 3D pins 2018-11-05 22:38:20 -06:00
Scott Lahteine
0c85869c26 Clean up file endings 2018-11-04 18:30:10 -06:00
Scott Lahteine
3c21483c88 Provide DOGLCD SPI pins for MKS SBASE + VIKI 2018-11-04 16:20:22 -06:00
Scott Lahteine
9c0e05552e Suppress some compile warnings 2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 2018-11-04 15:03:45 -06:00
Scott Lahteine
608be966d7 Add servos to pins_FYSTEC_F6_13.h 2018-11-04 06:10:35 -06:00
InsanityAutomation
ad60f0691c Add Creality3D RAMPS pins definitions (#12229) 2018-10-26 16:09:04 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 2018-10-26 15:23:02 -05:00
Hannes Brandstätter-Müller
6ee2af5e2d Simplify pins_TRIGORILLA_14.h (#12162) 2018-10-21 03:23:20 -05:00
Scott Lahteine
b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
Karl Andersson
4eb798dbdc Add support for Arm'ed (STM32F4) board (#12147) 2018-10-19 14:50:52 -05:00
Scott Lahteine
a81763c237 Pins E sanity check tweak 2018-10-18 18:48:23 -05:00
Michael Triffon
eded90bf87 Updated Azteeg X5 Mini Wifi pins for onboard SD (#12133) 2018-10-18 11:52:55 -05:00
Chris Pepper
3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 2018-10-18 11:26:50 -05:00
Nils Hasenbanck
0519ef0802 Update pins for final RemRam v1.3 board (#12125) 2018-10-17 11:13:38 -05:00
Karl Andersson
8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 2018-10-16 06:42:41 -05:00
Christopher Pepper
42fb7c14b0 Update the sdcard usb sharing config and apply to Re-ARM 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Roxy-3D
25b980dddb
Remove erroneous Pin 12 definition 
There is no switchable Power Supply.   Don't put it on Pin 12.   
(Pin 12 is actually FAN1)
 2018-10-12 13:45:04 -05:00
Scott Lahteine
1407afad73 Move SENSITIVE_PINS to its own file 2018-10-11 01:10:11 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Hannes Brandstätter-Müller
a3e8cb1e44 [2.0.x] Ender-4 small improvements in Configuration (#11843) 2018-10-09 20:58:22 -05:00
Marcio Teixeira
ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
0fcdfdeed6 Followup to #12017 2018-10-06 13:23:58 -05:00
Phr3d13
acac2adfc8 Add support for MeCreator2 (#12017) 2018-10-06 12:26:49 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Victor Tseng
eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00