STM32F7 HAL using the official STM32 Arduino Core (#11750)

This commit is contained in:
Scott Lahteine 2018-10-03 03:26:07 -05:00 committed by GitHub
parent 3e58b3a5d4
commit 348004c34f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
24 changed files with 1436 additions and 6 deletions

View File

@ -0,0 +1,126 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "HAL.h"
#if ENABLED(EEPROM_EMULATED_WITH_SRAM)
#if STM32F7xx
#include "stm32f7xx_ll_pwr.h"
#else
#error "EEPROM_EMULATED_WITH_SRAM is currently only supported for STM32F7xx"
#endif
#endif // EEPROM_EMULATED_WITH_SRAM
// --------------------------------------------------------------------------
// Externals
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Local defines
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
uint16_t HAL_adc_result;
// --------------------------------------------------------------------------
// Private Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Function prototypes
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private functions
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
// HAL initialization task
void HAL_init(void) {
#if ENABLED(SDSUPPORT)
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
#if ENABLED(EEPROM_EMULATED_WITH_SRAM)
// Enable access to backup SRAM
__HAL_RCC_PWR_CLK_ENABLE();
HAL_PWR_EnableBkUpAccess();
__HAL_RCC_BKPSRAM_CLK_ENABLE();
// Enable backup regulator
LL_PWR_EnableBkUpRegulator();
// Wait until backup regulator is initialized
while (!LL_PWR_IsActiveFlag_BRR());
#endif // EEPROM_EMULATED_SRAM
}
void HAL_clear_reset_source(void) { __HAL_RCC_CLEAR_RESET_FLAGS(); }
uint8_t HAL_get_reset_source (void) {
if (__HAL_RCC_GET_FLAG(RCC_FLAG_IWDGRST) != RESET) return RST_WATCHDOG;
if (__HAL_RCC_GET_FLAG(RCC_FLAG_SFTRST) != RESET) return RST_SOFTWARE;
if (__HAL_RCC_GET_FLAG(RCC_FLAG_PINRST) != RESET) return RST_EXTERNAL;
if (__HAL_RCC_GET_FLAG(RCC_FLAG_PORRST) != RESET) return RST_POWER_ON;
return 0;
}
void _delay_ms(const int delay_ms) { delay(delay_ms); }
extern "C" {
extern unsigned int _ebss; // end of bss section
}
// --------------------------------------------------------------------------
// ADC
// --------------------------------------------------------------------------
void HAL_adc_start_conversion(const uint8_t adc_pin) {
HAL_adc_result = analogRead(adc_pin);
}
uint16_t HAL_adc_get_result(void) {
return HAL_adc_result;
}
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1,220 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define CPU_32_BIT
#undef DEBUG_NONE
#ifndef vsnprintf_P
#define vsnprintf_P vsnprintf
#endif
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include <stdint.h>
#include "Arduino.h"
#ifdef USBCON
#include <USBSerial.h>
#endif
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio_STM32.h"
#include "watchdog_STM32.h"
#include "HAL_timers_STM32.h"
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
#if SERIAL_PORT == 0
#error "Serial port 0 does not exist"
#endif
#if !WITHIN(SERIAL_PORT, -1, 6)
#error "SERIAL_PORT must be from -1 to 6"
#endif
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 3
#define MYSERIAL0 Serial3
#elif SERIAL_PORT == 4
#define MYSERIAL0 Serial4
#elif SERIAL_PORT == 5
#define MYSERIAL0 Serial5
#elif SERIAL_PORT == 6
#define MYSERIAL0 Serial6
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == 0
#error "Serial port 0 does not exist"
#endif
#if !WITHIN(SERIAL_PORT_2, -1, 6)
#error "SERIAL_PORT_2 must be from -1 to 6"
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT"
#endif
#define NUM_SERIAL 2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 Serial0 // TODO Once CDC is supported
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial2
#elif SERIAL_PORT_2 == 3
#define MYSERIAL1 Serial3
#elif SERIAL_PORT_2 == 4
#define MYSERIAL1 Serial4
#elif SERIAL_PORT_2 == 5
#define MYSERIAL1 Serial5
#elif SERIAL_PORT_2 == 6
#define MYSERIAL1 Serial6
#endif
#else
#define NUM_SERIAL 1
#endif
#define _BV(b) (1 << (b))
/**
* TODO: review this to return 1 for pins that are not analog input
*/
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) (p)
#endif
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define cli() __disable_irq()
#define sei() __enable_irq()
// On AVR this is in math.h?
#define square(x) ((x)*(x))
#ifndef strncpy_P
#define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
#endif
// Fix bug in pgm_read_ptr
#undef pgm_read_ptr
#define pgm_read_ptr(addr) (*(addr))
#define RST_POWER_ON 1
#define RST_EXTERNAL 2
#define RST_BROWN_OUT 4
#define RST_WATCHDOG 8
#define RST_JTAG 16
#define RST_SOFTWARE 32
#define RST_BACKUP 64
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef int8_t pin_t;
#define HAL_SERVO_LIB libServo
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
/** result of last ADC conversion */
extern uint16_t HAL_adc_result;
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
// Memory related
#define __bss_end __bss_end__
// Enable hooks into setup for HAL
#define HAL_INIT 1
void HAL_init(void);
/** clear reset reason */
void HAL_clear_reset_source (void);
/** reset reason */
uint8_t HAL_get_reset_source (void);
void _delay_ms(const int delay);
extern "C" char* _sbrk(int incr);
static int freeMemory() {
volatile char top;
return &top - reinterpret_cast<char*>(_sbrk(0));
}
// SPI: Extended functions which take a channel number (hardware SPI only)
/** Write single byte to specified SPI channel */
void spiSend(uint32_t chan, byte b);
/** Write buffer to specified SPI channel */
void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
/** Read single byte from specified SPI channel */
uint8_t spiRec(uint32_t chan);
// EEPROM
/**
* Wire library should work for i2c eeproms.
*/
void eeprom_write_byte(unsigned char *pos, unsigned char value);
unsigned char eeprom_read_byte(unsigned char *pos);
void eeprom_read_block (void *__dst, const void *__src, size_t __n);
void eeprom_update_block (const void *__src, void *__dst, size_t __n);
// ADC
#define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)
inline void HAL_adc_init(void) {}
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result(void);
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

View File

@ -0,0 +1,57 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS
#include "HAL_Servo_STM32.h"
uint8_t servoPin[MAX_SERVOS] = { 0 };
int8_t libServo::attach(const int pin) {
if (this->servoIndex >= MAX_SERVOS) return -1;
if (pin > 0) servoPin[this->servoIndex] = pin;
return Servo::attach(servoPin[this->servoIndex]);
}
int8_t libServo::attach(const int pin, const int min, const int max) {
if (pin > 0) servoPin[this->servoIndex] = pin;
return Servo::attach(servoPin[this->servoIndex], min, max);
}
void libServo::move(const int value) {
constexpr uint16_t servo_delay[] = SERVO_DELAY;
static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
if (this->attach(0) >= 0) {
this->write(value);
safe_delay(servo_delay[this->servoIndex]);
#if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
this->detach();
#endif
}
}
#endif // HAS_SERVOS
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <Servo.h>
// Inherit and expand on the official library
class libServo : public Servo {
public:
int8_t attach(const int pin);
int8_t attach(const int pin, const int min, const int max);
void move(const int value);
private:
uint16_t min_ticks, max_ticks;
uint8_t servoIndex; // index into the channel data for this servo
};

View File

@ -0,0 +1,159 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "HAL.h"
#include "../shared/HAL_SPI.h"
#include "pins_arduino.h"
#include "spi_pins.h"
#include "../../core/macros.h"
#include <SPI.h>
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
static SPISettings spiConfig;
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
#if ENABLED(SOFTWARE_SPI)
// --------------------------------------------------------------------------
// Software SPI
// --------------------------------------------------------------------------
#error "Software SPI not supported for STM32F7. Use Hardware SPI."
#else
// --------------------------------------------------------------------------
// Hardware SPI
// --------------------------------------------------------------------------
/**
* VGPV SPI speed start and PCLK2/2, by default 108/2 = 54Mhz
*/
/**
* @brief Begin SPI port setup
*
* @return Nothing
*
* @details Only configures SS pin since stm32duino creates and initialize the SPI object
*/
void spiBegin(void) {
#if !PIN_EXISTS(SS)
#error "SS_PIN not defined!"
#endif
SET_OUTPUT(SS_PIN);
WRITE(SS_PIN, HIGH);
}
/** Configure SPI for specified SPI speed */
void spiInit(uint8_t spiRate) {
// Use datarates Marlin uses
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 20000000; break; // 13.9mhz=20000000 6.75mhz=10000000 3.38mhz=5000000 .833mhz=1000000
case SPI_HALF_SPEED: clock = 5000000; break;
case SPI_QUARTER_SPEED: clock = 2500000; break;
case SPI_EIGHTH_SPEED: clock = 1250000; break;
case SPI_SPEED_5: clock = 625000; break;
case SPI_SPEED_6: clock = 300000; break;
default:
clock = 4000000; // Default from the SPI library
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
/**
* @brief Receives a single byte from the SPI port.
*
* @return Byte received
*
* @details
*/
uint8_t spiRec(void) {
SPI.beginTransaction(spiConfig);
uint8_t returnByte = SPI.transfer(0xFF);
SPI.endTransaction();
return returnByte;
}
/**
* @brief Receives a number of bytes from the SPI port to a buffer
*
* @param buf Pointer to starting address of buffer to write to.
* @param nbyte Number of bytes to receive.
* @return Nothing
*
* @details Uses DMA
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
if (nbyte == 0) return;
SPI.beginTransaction(spiConfig);
for (int i = 0; i < nbyte; i++) {
buf[i] = SPI.transfer(0xFF);
}
SPI.endTransaction();
}
/**
* @brief Sends a single byte on SPI port
*
* @param b Byte to send
*
* @details
*/
void spiSend(uint8_t b) {
SPI.beginTransaction(spiConfig);
SPI.transfer(b);
SPI.endTransaction();
}
/**
* @brief Write token and then write from 512 byte buffer to SPI (for SD card)
*
* @param buf Pointer with buffer start address
* @return Nothing
*
* @details Use DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPI.transfer(token);
SPI.transfer((uint8_t*)buf, (uint8_t*)0, 512);
SPI.endTransaction();
}
#endif // SOFTWARE_SPI
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1,117 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "HAL.h"
#include "HAL_timers_STM32.h"
// --------------------------------------------------------------------------
// Externals
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Local defines
// --------------------------------------------------------------------------
#define NUM_HARDWARE_TIMERS 2
//#define PRESCALER 1
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private Variables
// --------------------------------------------------------------------------
stm32f4_timer_t TimerHandle[NUM_HARDWARE_TIMERS];
// --------------------------------------------------------------------------
// Function prototypes
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Private functions
// --------------------------------------------------------------------------
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
bool timers_initialised[NUM_HARDWARE_TIMERS] = {false};
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
if (!timers_initialised[timer_num]) {
constexpr uint32_t step_prescaler = STEPPER_TIMER_PRESCALE - 1,
temp_prescaler = TEMP_TIMER_PRESCALE - 1;
switch (timer_num) {
case STEP_TIMER_NUM:
// STEPPER TIMER - use a 32bit timer if possible
TimerHandle[timer_num].timer = STEP_TIMER_DEV;
TimerHandle[timer_num].irqHandle = Step_Handler;
TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / step_prescaler) / frequency) - 1, step_prescaler);
HAL_NVIC_SetPriority(STEP_TIMER_IRQ_NAME, 6, 0);
break;
case TEMP_TIMER_NUM:
// TEMP TIMER - any available 16bit Timer
TimerHandle[timer_num].timer = TEMP_TIMER_DEV;
TimerHandle[timer_num].irqHandle = Temp_Handler;
TimerHandleInit(&TimerHandle[timer_num], (((HAL_TIMER_RATE) / temp_prescaler) / frequency) - 1, temp_prescaler);
HAL_NVIC_SetPriority(TEMP_TIMER_IRQ_NAME, 2, 0);
break;
}
timers_initialised[timer_num] = true;
}
}
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer));
HAL_NVIC_EnableIRQ(IRQ_Id);
}
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
const IRQn_Type IRQ_Id = IRQn_Type(getTimerIrq(TimerHandle[timer_num].timer));
HAL_NVIC_DisableIRQ(IRQ_Id);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
const uint32_t IRQ_Id = getTimerIrq(TimerHandle[timer_num].timer);
return NVIC->ISER[IRQ_Id >> 5] & _BV32(IRQ_Id & 0x1F);
}
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1,168 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include <stdint.h>
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
#define FORCE_INLINE __attribute__((always_inline)) inline
#define hal_timer_t uint32_t // TODO: One is 16-bit, one 32-bit - does this need to be checked?
#define HAL_TIMER_TYPE_MAX 0xFFFF
#ifdef STM32F0xx
#define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq()) // frequency of timer peripherals
#define TEMP_TIMER_PRESCALE 666 // prescaler for setting temperature timer, 72Khz
#define STEPPER_TIMER_PRESCALE 24 // prescaler for setting stepper timer, 2Mhz
#define STEP_TIMER 16
#define TEMP_TIMER 17
#elif defined STM32F1xx
#define HAL_TIMER_RATE (HAL_RCC_GetPCLK2Freq()) // frequency of timer peripherals
#define TEMP_TIMER_PRESCALE 1000 // prescaler for setting temperature timer, 72Khz
#define STEPPER_TIMER_PRESCALE 36 // prescaler for setting stepper timer, 2Mhz.
#define STEP_TIMER 4
#define TEMP_TIMER 2
#elif defined STM32F4xx
#define HAL_TIMER_RATE (HAL_RCC_GetPCLK2Freq()) // frequency of timer peripherals
#define TEMP_TIMER_PRESCALE 2333 // prescaler for setting temperature timer, 72Khz
#define STEPPER_TIMER_PRESCALE 84 // prescaler for setting stepper timer, 2Mhz
#define STEP_TIMER 4
#define TEMP_TIMER 5
#elif defined STM32F7xx
#define HAL_TIMER_RATE (HAL_RCC_GetSysClockFreq()/2) // frequency of timer peripherals
#define TEMP_TIMER_PRESCALE 1500 // prescaler for setting temperature timer, 72Khz
#define STEPPER_TIMER_PRESCALE 54 // prescaler for setting stepper timer, 2Mhz.
#define STEP_TIMER 5
#define TEMP_TIMER 7
#if MB(REMRAM_V1)
#define STEP_TIMER 2
#endif
#endif
#define STEP_TIMER_NUM 0 // index of timer to use for stepper
#define TEMP_TIMER_NUM 1 // index of timer to use for temperature
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // frequency of stepper timer
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE // frequency of pulse timer
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define __TIMER_DEV(X) TIM##X
#define _TIMER_DEV(X) __TIMER_DEV(X)
#define STEP_TIMER_DEV _TIMER_DEV(STEP_TIMER)
#define TEMP_TIMER_DEV _TIMER_DEV(TEMP_TIMER)
#define __TIMER_CALLBACK(X) TIM##X##_IRQHandler
#define _TIMER_CALLBACK(X) __TIMER_CALLBACK(X)
#define STEP_TIMER_CALLBACK _TIMER_CALLBACK(STEP_TIMER)
#define TEMP_TIMER_CALLBACK _TIMER_CALLBACK(TEMP_TIMER)
#define __TIMER_IRQ_NAME(X) TIM##X##_IRQn
#define _TIMER_IRQ_NAME(X) __TIMER_IRQ_NAME(X)
#define STEP_TIMER_IRQ_NAME _TIMER_IRQ_NAME(STEP_TIMER)
#define TEMP_TIMER_IRQ_NAME _TIMER_IRQ_NAME(TEMP_TIMER)
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define TEMP_ISR_ENABLED() HAL_timer_interrupt_enabled(TEMP_TIMER_NUM)
extern void Step_Handler(stimer_t *htim);
extern void Temp_Handler(stimer_t *htim);
#define HAL_STEP_TIMER_ISR void Step_Handler(stimer_t *htim)
#define HAL_TEMP_TIMER_ISR void Temp_Handler(stimer_t *htim)
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef stimer_t stm32f4_timer_t;
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
extern stm32f4_timer_t TimerHandle[];
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
FORCE_INLINE static uint32_t HAL_timer_get_count(const uint8_t timer_num) {
return __HAL_TIM_GET_COUNTER(&TimerHandle[timer_num].handle);
}
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const uint32_t compare) {
__HAL_TIM_SET_AUTORELOAD(&TimerHandle[timer_num].handle, compare);
if (HAL_timer_get_count(timer_num) >= compare)
TimerHandle[timer_num].handle.Instance->EGR |= TIM_EGR_UG; // Generate an immediate update interrupt
}
FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
return __HAL_TIM_GET_AUTORELOAD(&TimerHandle[timer_num].handle);
}
FORCE_INLINE static void HAL_timer_restrain(const uint8_t timer_num, const uint16_t interval_ticks) {
const hal_timer_t mincmp = HAL_timer_get_count(timer_num) + interval_ticks;
if (HAL_timer_get_compare(timer_num) < mincmp)
HAL_timer_set_compare(timer_num, mincmp);
}
#define HAL_timer_isr_prologue(TIMER_NUM)
#define HAL_timer_isr_epilogue(TIMER_NUM)

View File

@ -0,0 +1,11 @@
# Generic STM32 HAL based on the stm32duino core
This HAL is intended to act as the generic STM32 HAL for all STM32 chips (The whole F, H and L family).
Currently it supports:
* STM32F0xx
* STM32F1xx
* STM32F4xx
* STM32F7xx
Targeting the official [Arduino STM32 Core](https://github.com/stm32duino/Arduino_Core_STM32).

View File

@ -0,0 +1,71 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Test Re-ARM specific configuration values for errors at compile-time.
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
#elif ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
#if !PWM_PIN(SPINDLE_LASER_PWM_PIN)
#error "SPINDLE_LASER_PWM_PIN not assigned to a PWM pin."
#elif !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
#error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
#elif SPINDLE_LASER_POWERUP_DELAY < 1
#error "SPINDLE_LASER_POWERUP_DELAY must be greater than 0."
#elif SPINDLE_LASER_POWERDOWN_DELAY < 1
#error "SPINDLE_LASER_POWERDOWN_DELAY must be greater than 0."
#elif !defined(SPINDLE_LASER_PWM_INVERT)
#error "SPINDLE_LASER_PWM_INVERT missing."
#elif !defined(SPEED_POWER_SLOPE) || !defined(SPEED_POWER_INTERCEPT) || !defined(SPEED_POWER_MIN) || !defined(SPEED_POWER_MAX)
#error "SPINDLE_LASER_PWM equation constant(s) missing."
#elif PIN_EXISTS(CASE_LIGHT) && SPINDLE_LASER_PWM_PIN == CASE_LIGHT_PIN
#error "SPINDLE_LASER_PWM_PIN is used by CASE_LIGHT_PIN."
#elif PIN_EXISTS(E0_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E0_AUTO_FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by E0_AUTO_FAN_PIN."
#elif PIN_EXISTS(E1_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E1_AUTO_FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by E1_AUTO_FAN_PIN."
#elif PIN_EXISTS(E2_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E2_AUTO_FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by E2_AUTO_FAN_PIN."
#elif PIN_EXISTS(E3_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E3_AUTO_FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by E3_AUTO_FAN_PIN."
#elif PIN_EXISTS(E4_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E4_AUTO_FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by E4_AUTO_FAN_PIN."
#elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
#elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
#error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
#elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
#error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
#elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
#error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
#endif
#endif
#endif // SPINDLE_LASER_ENABLE
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32. Disable EMERGENCY_PARSER to continue."
#endif

View File

@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../module/endstops.h"
// One ISR for all EXT-Interrupts
void endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) {
#if HAS_X_MAX
attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_X_MIN
attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MAX
attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MIN
attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MAX
attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN
attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MAX
attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MIN
attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN_PROBE_PIN
attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
#endif
}

View File

@ -0,0 +1,53 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (C) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast I/O interfaces for STM32F7
* These use GPIO functions instead of Direct Port Manipulation, as on AVR.
*/
#define _BV(b) (1 << (b))
#define USEABLE_HARDWARE_PWM(p) true
#define READ(IO) digitalRead(IO)
#define WRITE(IO,V) digitalWrite(IO,V)
#define WRITE_VAR(IO,V) WRITE(IO,V)
#define _GET_MODE(IO)
#define _SET_MODE(IO,M) pinMode(IO, M)
#define _SET_OUTPUT(IO) pinMode(IO, OUTPUT) /*!< Output Push Pull Mode & GPIO_NOPULL */
#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
#define SET_INPUT(IO) _SET_MODE(IO, INPUT) /*!< Input Floating Mode */
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, INPUT_PULLUP) /*!< Input with Pull-up activation */
#define SET_INPUT_PULLDOWN(IO) _SET_MODE(IO, INPUT_PULLDOWN) /*!< Input with Pull-down activation */
#define SET_OUTPUT(IO) OUT_WRITE(IO, LOW)
#define TOGGLE(IO) OUT_WRITE(IO, !READ(IO))
#define GET_INPUT(IO)
#define GET_OUTPUT(IO)
#define GET_TIMER(IO)

View File

@ -0,0 +1,103 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
* Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
* Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
#include "../../inc/MarlinConfig.h"
#if ENABLED(EEPROM_SETTINGS)
#include "../shared/persistent_store_api.h"
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
#include <EEPROM.h>
static bool eeprom_data_written = false;
#endif
bool PersistentStore::access_start() {
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
eeprom_buffer_fill();
#endif
return true;
}
bool PersistentStore::access_finish() {
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
if (eeprom_data_written) {
eeprom_buffer_flush();
eeprom_data_written = false;
}
#endif
return true;
}
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
while (size--) {
uint8_t v = *value;
// Save to either program flash or Backup SRAM
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
eeprom_buffered_write_byte(pos, v);
#else
*(__IO uint8_t *)(BKPSRAM_BASE + (uint8_t * const)pos) = v;
#endif
crc16(crc, &v, 1);
pos++;
value++;
};
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
eeprom_data_written = true;
#endif
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing) {
do {
// Read from either program flash or Backup SRAM
const uint8_t c = (
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
eeprom_buffered_read_byte(pos)
#else
(*(__IO uint8_t *)(BKPSRAM_BASE + ((unsigned char*)pos)))
#endif
);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
} while (--size);
return false;
}
size_t PersistentStore::capacity() {
#if DISABLED(EEPROM_EMULATED_WITH_SRAM)
return E2END + 1;
#else
return 4096; // 4kB
#endif
}
#endif // EEPROM_SETTINGS
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1 @@
#error "Debug pins is not yet supported for STM32!"

View File

@ -0,0 +1,36 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*
*/
#ifndef SCK_PIN
#define SCK_PIN 13
#endif
#ifndef MISO_PIN
#define MISO_PIN 12
#endif
#ifndef MOSI_PIN
#define MOSI_PIN 11
#endif
#ifndef SS_PIN
#define SS_PIN 14
#endif

View File

@ -0,0 +1,37 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_STM32
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog_STM32.h"
#include <IWatchdog.h>
void watchdog_init() { IWatchdog.begin(4000000); } // 4 sec timeout
void watchdog_reset() { IWatchdog.reload(); }
#endif // USE_WATCHDOG
#endif // ARDUINO_ARCH_STM32

View File

@ -0,0 +1,27 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include "../../inc/MarlinConfig.h"
void watchdog_init();
void watchdog_reset();

View File

@ -15,10 +15,12 @@
#define HAL_PLATFORM HAL_LPC1768
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
#define HAL_PLATFORM HAL_STM32F1
#elif defined(STM32F4) || defined(STM32F4xx)
#elif defined(STM32GENERIC) && defined(STM32F4)
#define HAL_PLATFORM HAL_STM32F4
#elif defined(STM32F7)
#elif defined(STM32GENERIC) && defined(STM32F7)
#define HAL_PLATFORM HAL_STM32F7
#elif defined(ARDUINO_ARCH_STM32)
#define HAL_PLATFORM HAL_STM32
#elif defined(ARDUINO_ARCH_ESP32)
#define HAL_PLATFORM HAL_ESP32
#else

View File

@ -15,6 +15,7 @@
#if defined(__arm__) || defined(__thumb__)
#include "unwmemaccess.h"
#include "../../../inc/MarlinConfig.h"
/* Validate address */
@ -73,7 +74,7 @@
#define END_FLASH_ADDR 0x08080000
#endif
#ifdef STM32F7
#if MB(THE_BORG)
// For STM32F765 in BORG
// SRAM (0x20000000 - 0x20080000) (512kb)
// FLASH (0x08000000 - 0x08100000) (1024kb)
@ -84,6 +85,17 @@
#define END_FLASH_ADDR 0x08100000
#endif
#if MB(REMRAM_V1)
// For STM32F765VI in RemRam v1
// SRAM (0x20000000 - 0x20080000) (512kb)
// FLASH (0x08000000 - 0x08200000) (2048kb)
//
#define START_SRAM_ADDR 0x20000000
#define END_SRAM_ADDR 0x20080000
#define START_FLASH_ADDR 0x08000000
#define END_FLASH_ADDR 0x08200000
#endif
#ifdef __MK20DX256__
// For MK20DX256 in TEENSY 3.1 or TEENSY 3.2
// SRAM (0x1FFF8000 - 0x20008000) (64kb)

View File

@ -53,7 +53,7 @@
#include "../../inc/MarlinConfig.h"
#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F1) || defined(STM32F1xx) || defined(STM32F4) || defined(STM32F4xx))
#if HAS_SERVOS && !(IS_32BIT_TEENSY || defined(TARGET_LPC1768) || defined(STM32F1) || defined(STM32F1xx) || defined(STM32F4) || defined(STM32F4xx) || defined(STM32F7xx))
//#include <Arduino.h>
#include "servo.h"

View File

@ -74,10 +74,12 @@
#include "../HAL_TEENSY35_36/HAL_Servo_Teensy.h"
#elif defined(TARGET_LPC1768)
#include "../HAL_LPC1768/LPC1768_Servo.h"
#elif defined(STM32F1) || defined(STM32F1xx)
#elif defined(__STM32F1__) || defined(TARGET_STM32F1)
#include "../HAL_STM32F1/HAL_Servo_STM32F1.h"
#elif defined(STM32F4) || defined(STM32F4xx)
#elif defined(STM32GENERIC) && defined(STM32F4)
#include "../HAL_STM32F4/HAL_Servo_STM32F4.h"
#elif defined(ARDUINO_ARCH_STM32)
#include "../HAL_STM32/HAL_Servo_STM32.h"
#else
#include <stdint.h>

View File

@ -236,6 +236,7 @@
//
#define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan)
#define BOARD_REMRAM_V1 1862 // RemRam v1
//
// Espressif ESP32 WiFi

View File

@ -72,6 +72,10 @@
#define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0)
#define CPU_ST7920_DELAY_3 DELAY_NS(189)
#elif MB(REMRAM_V1)
#define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0)
#define CPU_ST7920_DELAY_3 DELAY_NS(0)
#elif F_CPU == 16000000
#define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0)

View File

@ -404,6 +404,8 @@
#elif MB(THE_BORG)
#include "pins_THE_BORG.h" // STM32F7 env:STM32F7
#elif MB(REMRAM_V1)
#include "pins_REMRAM_V1.h" // STM32F7 env:STM32F7xx
//
// Espressif ESP32

View File

@ -0,0 +1,126 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifndef STM32F7xx
#error "Oops! Make sure you have an STM32F7 board selected from the 'Tools -> Boards' menu."
#endif
#define DEFAULT_MACHINE_NAME "RemRam"
#define BOARD_NAME "RemRam v1"
#define EEPROM_EMULATED_WITH_SRAM // Emulate the EEPROM using Backup SRAM
#if E_STEPPERS > 1 || HOTENDS > 1
#error "RemRam supports only one hotend / E-stepper."
#endif
//
// Limit Switches
//
#if DISABLED(SENSORLESS_HOMING)
#define X_MIN_PIN 58
#define X_MAX_PIN 59
#define Y_MIN_PIN 60
#define Y_MAX_PIN 61
#define Z_MIN_PIN 62
#define Z_MAX_PIN 63
#else
#define X_STOP_PIN 36
#define Y_STOP_PIN 39
#define Z_MIN_PIN 62
#define Z_MAX_PIN 42
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 26 // EXT_D1
#endif
//
// Steppers
//
#define X_STEP_PIN 22
#define X_DIR_PIN 35
#define X_ENABLE_PIN 34
#define X_CS_PIN 14
#define Y_STEP_PIN 23
#define Y_DIR_PIN 38
#define Y_ENABLE_PIN 37
#define Y_CS_PIN 15
#define Z_STEP_PIN 24
#define Z_DIR_PIN 41
#define Z_ENABLE_PIN 40
#define Z_CS_PIN 16
#define E0_STEP_PIN 25
#define E0_DIR_PIN 44
#define E0_ENABLE_PIN 43
#define E0_CS_PIN 10
//
// Temperature Sensors
//
#define TEMP_0_PIN 65 // THERM_2
#define TEMP_1_PIN 66 // THERM_3
#define TEMP_BED_PIN 64 // THERM_1
//
// Heaters / Fans
//
#define HEATER_0_PIN 33
#define HEATER_BED_PIN 31
#ifndef FAN_PIN
#define FAN_PIN 30 // "FAN1"
#endif
#define FAN1_PIN 32 // "FAN2"
#define ORIG_E0_AUTO_FAN_PIN 32 // Use this by NOT overriding E0_AUTO_FAN_PIN
//
// Servos
//
#define SERVO0_PIN 26 // PWM_EXT1
#define SERVO1_PIN 27 // PWM_EXT2
#define SDSS 9
#define LED_PIN 21 // STATUS_LED
#define KILL_PIN 57
//
// LCD / Controller
//
#define SD_DETECT_PIN 56 // SD_CARD_DET
#define BEEPER_PIN 46 // LCD_BEEPER
#define LCD_PINS_RS 49 // LCD_RS
#define LCD_PINS_ENABLE 48 // LCD_EN
#define LCD_PINS_D4 50 // LCD_D4
#define LCD_PINS_D5 51 // LCD_D5
#define LCD_PINS_D6 52 // LCD_D6
#define LCD_PINS_D7 53 // LCD_D7
#define BTN_EN1 54 // BTN_EN1
#define BTN_EN2 55 // BTN_EN2
#define BTN_ENC 47 // BTN_ENC