Protoneer CNC-Shield 3.00 (#22715)

This commit is contained in:
Dan 2021-09-05 13:32:09 -07:00 committed by Scott Lahteine
parent f94de97cdb
commit 4c7f8696ab
3 changed files with 80 additions and 0 deletions

View File

@ -161,6 +161,7 @@
#define BOARD_INTAMSYS40 1326 // Intamsys 4.0 (Funmat HT)
#define BOARD_MALYAN_M180 1327 // Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
#define BOARD_GT2560_V4_A20 1328 // Geeetech GT2560 Rev B for A20(M/T/D)
#define BOARD_PROTONEER_CNC_SHIELD_V3 1329 // Mega controller & Protoneer CNC Shield V3.00
//
// ATmega1281, ATmega2561

View File

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Protoneer v3.00 pin assignments
*
* This CNC shield has an UNO pinout and fits all Arduino-compatibles.
*
* Referenced docs:
* - https://blog.protoneer.co.nz/arduino-cnc-shield-v3-00-assembly-guide/
* - https://blog.protoneer.co.nz/arduino-cnc-shield/
*/
#include "env_validate.h"
#define BOARD_INFO_NAME "Protoneer CNC Shield v3.00"
//
// Limit Switches
//
#define X_STOP_PIN 9
#define Y_STOP_PIN 10
#define Z_STOP_PIN 11
//
// Steppers
//
#define X_STEP_PIN 2
#define X_DIR_PIN 5
#define X_ENABLE_PIN 8 // Shared enable pin
#define Y_STEP_PIN 3
#define Y_DIR_PIN 6
#define Y_ENABLE_PIN X_ENABLE_PIN
#define Z_STEP_PIN 4
#define Z_DIR_PIN 7
#define Z_ENABLE_PIN X_ENABLE_PIN
// Designated with letter "A" on BOARD
#define E0_STEP_PIN 12
#define E0_DIR_PIN 13
#define E0_ENABLE_PIN X_ENABLE_PIN
//
// Temperature sensors - These could be any analog output not hidden by board
//
#define TEMP_0_PIN 8 // Analog Input
//#define TEMP_1_PIN 9 // Analog Input
//#define TEMP_BED_PIN 10 // Analog Input
//
// Heaters / Fans - These could be any digital input not hidden by board
//
//#define HEATER_0_PIN 22 // EXTRUDER 1
//#define HEATER_1_PIN 23 // EXTRUDER 2
//#define HEATER_BED_PIN 24

View File

@ -269,6 +269,8 @@
#include "mega/pins_INTAMSYS40.h" // ATmega2560 env:mega2560
#elif MB(MALYAN_M180)
#include "mega/pins_MALYAN_M180.h" // ATmega2560 env:mega2560
#elif MB(PROTONEER_CNC_SHIELD_V3)
#include "mega/pins_PROTONEER_CNC_SHIELD_V3.h"// ATmega2560 env:mega2560
//
// ATmega1281, ATmega2561