Marlin_Firmware/config/examples/Malyan/M150

Configuration for Malyan M150 HobbyKing printer

Config without automatic bed level sensor, or in other words, "as stock"

To install:

1. Install Arduino

2. Install U8glib

   • Sketch -> Include Library -> Manage Libraries...
   • Search for and install U8glib by oliver

3. Install Sanguino

   • File -> Preferences
   • Add https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json to Additional Boards Manager URLs

4. Modify Sanguino boards.txt

   • Close Arduino

   • Locate Arduino15 folder

     • C:\Users\<username>\AppData\Local\Arduino15 for Windows
     • ~/.arduino15 for Linux

   • Locate boards.txt in packages/Sanguino/hardware/avr/1.0.2 (version number may change)

   • Add the following to the end of boards.txt (note that it is the same as sanguino.menu.cpu.atmega1284p but with a different name and upload speed)

       ## Malyan M150 W/ ATmega1284P 16MHz
       sanguino.menu.cpu.malyan_m150=Malyan M150
       sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048
       sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384
       sanguino.menu.cpu.malyan_m150.upload.speed=57600
       sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex
       sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p
       sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L
     

5. Configure Marlin

   • Copy _Bootscreen.h, Configuration.h, and Configuration_adv.h from config/examples/Malyan/M150 to Marlin (overwrite files)
   • Read Configuration.h and make any necessary changes

6. Flash Marlin

   • Turn on printer while pressing scroll wheel button

   • Plug printer in to computer with USB cable

   • Open Marlin/Marlin.ino with Arduino

   • Configure Arduino

     • Tools -> Board -> Sanguino
     • Tools -> Processor -> Malyan M150
     • Tools -> Port -> Select your port

   • Sketch -> Upload or click arrow in top right corner