bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin
History
Tannoo 66db6c3acc UBL Menu System 1.1 
/**
     * UBL System submenu
     *
     *  Prepare
     * - Unified Bed Leveling
     *   - Activate UBL
     *   - Deactivate UBL
     *   - Mesh Storage
     *       Memory Slot:
     *       Load Bed Mesh
     *       Save Bed Mesh
     *   - Output Map
     *       Map Type:
     *       Output Bed Mesh Host / Output Bed Mesh CSV
     *   - UBL Tools
     *     - Build Mesh
     *         Build PLA Mesh
     *         Build ABS Mesh
     *       - Build Custom Mesh
     *           Hotend Temp:
     *           Bed Temp:
     *           Build Custom Mesh
     *         Info Screen
     *       - Build Cold Mesh
     *       - Fill-in Mesh
     *           Fill-in Mesh
     *           Smart Fill-in
     *           Manual Fill-in
     *           Info Screen
     *         Continue Bed Mesh
     *         Invalidate All
     *         Invalidate Closest
     *     - Validate Mesh
     *         PLA Mesh Validation
     *         ABS Mesh Validation
     *       - Custom Mesh Validation
     *           Hotend Temp:
     *           Bed Temp:
     *           Validate Mesh
     *         Info Screen
     *     - Edit Mesh
     *         Fine Tune All
     *         Fine Tune Closest
     *       - Adjust Mesh Height
     *           Height Amount:
     *           Adjust Mesh Height
     *         Info Screen
     *     - Mesh Leveling
     *         3-Point Mesh Leveling
     *       - Grid Mesh Leveling
     *           Side points:
     *           Level Mesh
     *         Info Screen
     *   - Output UBL Info
     */
2017-05-10 12:14:43 -05:00
..
example_configurations
Disable SCARA feedrate scaling by default
2017-05-08 14:41:03 -05:00
blinkm.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
blinkm.h
…
boards.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
buzzer.h
…
cardreader.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
cardreader.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
circularqueue.h
…
Conditionals_LCD.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Conditionals_post.h
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
Conditionals.h
…
Configuration_adv.h
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
configuration_store.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
configuration_store.h
Convert config code to a static class
2017-04-09 22:06:41 -05:00
Configuration.h
Note 5 extruders in config comments
2017-05-07 21:28:54 -05:00
dac_mcp4728.cpp
…
dac_mcp4728.h
Fix DAC current code
2016-10-17 15:17:57 -05:00
digipot_mcp4018.cpp
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
digipot_mcp4451.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
dogm_bitmaps.h
…
dogm_font_data_6x9_marlin.h
…
dogm_font_data_HD44780_C.h
…
dogm_font_data_HD44780_J.h
…
dogm_font_data_HD44780_W.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_1_PL.h
Polish font
2017-04-21 21:42:41 -05:00
dogm_font_data_ISO10646_1_tr.h
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_5_Cyrillic.h
…
dogm_font_data_ISO10646_CN.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_Greek.h
Change font decent to -1 for tt and gr
2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
…
dogm_font_data_Marlin_symbols.h
…
duration_t.h
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
endstop_interrupts.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
endstops.cpp
Towards supporting Z2 in Endstops::report_state
2017-05-02 15:39:32 -05:00
endstops.h
guaranteed BLTouch detection
2017-02-11 12:01:34 -06:00
enum.h
Fixes for DUAL_NOZZLE_DUPLICATION_MODE
2017-05-01 12:20:25 -05:00
fastio.h
Update fastio.h with special handling for Timer 2
2017-04-24 16:58:22 -05:00
G26_Mesh_Validation_Tool.cpp
misc. UBL fixes (#6631)
2017-05-07 18:23:48 -05:00
hex_print_routines.cpp
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
hex_print_routines.h
Add hex routine to print an address
2017-04-19 13:07:34 -05:00
language_an.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_bg.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_ca.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_cn.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_cz.h
Update language_cz.h for new translations (#6465)
2017-04-28 13:47:43 -05:00
language_da.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_de.h
Update language_de.h
2017-04-28 21:09:10 +02:00
language_el-gr.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_el.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_en.h
UBL Menu System 1.1
2017-05-10 12:14:43 -05:00
language_es.h
Last three Spanish language strings
2017-04-29 11:33:30 +08:00
language_eu.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_fi.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_fr.h
Various fixes for compiler warnings
2017-05-01 02:12:40 -05:00
language_gl.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_hr.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_it.h
Added missing translations (#6458)
2017-04-28 13:49:16 -05:00
language_kana_utf8.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_kana.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_nl.h
Fix mis-named language string define in Dutch
2017-05-02 16:08:09 -05:00
language_pl.h
Polish font
2017-04-21 21:42:41 -05:00
language_pt_utf8.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_pt-br_utf8.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_pt-br.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_pt.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_ru.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_test.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_tr.h
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
language_uk.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_zh_CN.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_zh_TW.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
least_squares_fit.cpp
Adjust spacing in LSF
2017-05-07 19:11:52 -05:00
least_squares_fit.h
Clean up least_squares_fit
2017-04-28 17:33:28 -05:00
M100_Free_Mem_Chk.cpp
Fix compiler complaint related to M100
2017-05-09 21:45:44 -04:00
macros.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Makefile
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Marlin_main.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Marlin.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
Marlin.ino
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
MarlinConfig.h
…
MarlinSerial.cpp
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
MarlinSerial.h
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
mesh_bed_leveling.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
nozzle.cpp
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
nozzle.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
pins_3DRAG.h
…
pins_5DPRINT.h
…
pins_AZTEEG_X1.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_AZTEEG_X3_PRO.h
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
pins_AZTEEG_X3.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_BAM_DICE_DUE.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_BQ_ZUM_MEGA_3D.h
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
pins_BRAINWAVE_PRO.h
…
pins_BRAINWAVE.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_CHEAPTRONIC.h
…
pins_CHEAPTRONICv2.h
Cheaptronic V2
2017-04-09 06:57:43 -05:00
pins_CNCONTROLS_11.h
…
pins_CNCONTROLS_12.h
…
pins_ELEFU_3.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_FELIX2.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_GEN3_MONOLITHIC.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN3_PLUS.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN6_DELUXE.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_GEN6.h
…
pins_GEN7_12.h
…
pins_GEN7_13.h
…
pins_GEN7_14.h
…
pins_GEN7_CUSTOM.h
…
pins_K8200.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_K8400.h
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
pins_LEAPFROG.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MEGACONTROLLER.h
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
pins_MEGATRONICS_2.h
…
pins_MEGATRONICS_3.h
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
pins_MEGATRONICS.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MELZI_MAKR3D.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MELZI.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h
Add RepRapDiscount Full Graphic Smart Controller support to MIGHTYBOARD REVE
2017-04-09 06:44:53 -05:00
pins_MINIRAMBO.h
…
pins_MINITRONICS.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_MKS_13.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_MKS_BASE.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_OMCA_A.h
…
pins_OMCA.h
Rename some (unused) OMCA pins
2017-04-30 22:16:44 -05:00
pins_PRINTRBOARD_REVF.h
…
pins_PRINTRBOARD.h
…
pins_RAMBO.h
Various fixes for compiler warnings
2017-05-01 02:12:40 -05:00
pins_RAMPS_13.h
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
pins_RAMPS_OLD.h
…
pins_RAMPS.h
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
pins_RIGIDBOARD_V2.h
Need to define this for Rigidboard V2
2017-04-30 19:04:27 -05:00
pins_RIGIDBOARD.h
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
2017-03-01 18:26:29 -06:00
pins_RUMBA.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_SAINSMART_2IN1.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_SANGUINOLOLU_11.h
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
pins_SANGUINOLOLU_12.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
pins_SCOOVO_X9H.h
Never define SLED_PIN
2017-04-14 16:36:32 -05:00
pins_SETHI.h
…
pins_STB_11.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_TEENSY2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_TEENSYLU.h
…
pins_ULTIMAIN_2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_ULTIMAKER_OLD.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_ULTIMAKER.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
pinsDebug_list.h
Implement USE_CONTROLLER_FAN as a feature
2017-05-02 20:18:52 -05:00
pinsDebug_Teensyduino.h
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
pinsDebug.h
Cleanup spacing in pinsDebug.h
2017-04-30 22:27:26 -05:00
planner_bezier.cpp
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
planner_bezier.h
…
planner.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
planner.h
Adjust leveling conditionals
2017-05-01 16:46:48 -05:00
point_t.h
…
printcounter.cpp
Cosmetic patches
2017-04-26 06:24:23 -05:00
printcounter.h
Cosmetic patches
2017-04-26 06:24:23 -05:00
qr_solve.cpp
…
qr_solve.h
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
SanityCheck.h
Fixed USE_CONTROLLER_FAN #define usage
2017-05-04 23:38:29 +02:00
Sd2Card.cpp
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
Sd2Card.h
…
SdBaseFile.cpp
…
SdBaseFile.h
…
SdFatConfig.h
repair-software-spi
2016-07-31 15:50:42 +02:00
SdFatStructs.h
…
SdFatUtil.cpp
…
SdFatUtil.h
…
SdFile.cpp
…
SdFile.h
…
SdInfo.h
…
SdVolume.cpp
…
SdVolume.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
serial.cpp
Add a function to output spaces to serial
2017-04-29 15:29:49 +03:00
serial.h
Add a function to output spaces to serial
2017-04-29 15:29:49 +03:00
servo.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
servo.h
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
softspi.h
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
speed_lookuptable.h
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
spi.h
Add software spi support for max6675
2017-04-09 06:44:53 -05:00
stepper_dac.cpp
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
stepper_dac.h
…
stepper_indirection.cpp
Cleanup, extend TMC2130 implementation
2017-04-14 23:00:00 -05:00
stepper_indirection.h
Updates to support 5 extruders
2017-04-09 03:49:16 -05:00
stepper.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
stepper.h
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
stopwatch.cpp
General comment cleanup
2017-04-08 18:58:33 -05:00
stopwatch.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
temperature.cpp
Apply const in BABYSTEPPING
2017-05-09 12:37:23 -05:00
temperature.h
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
thermistornames.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_1.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_2.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_3.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_4.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_5.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_6.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_7.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_8.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_9.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_10.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_11.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_12.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_13.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_20.h
Header and pins changes to support 5 extruders
2017-04-07 10:46:36 -05:00
thermistortable_51.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_52.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_55.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_60.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_66.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_70.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_71.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_75.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_110.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_147.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_998.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_999.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1010.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1047.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortables.h
Additional 5 extruders support (solenoids, microstepping)
2017-04-14 18:18:20 -05:00
twibus.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
twibus.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
types.h
…
ubl_G29.cpp
UBL Menu System 1.1
2017-05-10 12:14:43 -05:00
ubl_motion.cpp
Cleanups following recent commits
2017-05-08 14:23:01 -05:00
ubl.cpp
Adjust spacing of "spaces"
2017-05-07 21:28:54 -05:00
ubl.h
Organize ubl.h defines by the files they serve
2017-05-02 15:47:06 -05:00
ultralcd_impl_DOGM.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
ultralcd_impl_HD44780.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
ultralcd_st7920_u8glib_rrd.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
ultralcd.cpp
UBL Menu System 1.1
2017-05-10 12:14:43 -05:00
ultralcd.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
utf_mapper.h
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
utility.cpp
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
utility.h
Replace ftostr62sign with ftostr62rj
2016-12-12 20:25:20 +01:00
vector_3.cpp
Use 'sq' macro where possible
2017-05-02 22:22:23 -05:00
vector_3.h
Modify debug methods to take PSTR
2017-05-02 17:53:40 -05:00
Version.h
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
watchdog.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
watchdog.h
…