bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin
History
Bob-the-Kuhn 6643d553f6 # This is a combination of 2 commits. 
# This is the 1st commit message:

MCP4728 consistency & fix ultralcd.cpp

The MCP4728 DAC controls the stepper motor current strenth on the
PRINTRBOARD Rev F and RIGIDBOARD V2 boards.

PR #5792 on 9 FEB 2017 implemented default drive percentages but only on
the RIGIDBOARD V2.

This change moves the default settings to Configuration_adv.h.

Also, ultralcd.cpp won't compile because of a type def conflict.
Changed it to match the one in stepper_dac.cpp

===========================================================

reword stepper curent section for clarity

===========================================================

change name & improve comments

===========================================================

changed name from A4JP to SCOOVO_X9H per PR #6139

# This is the commit message #2:

fix typo
2017-04-06 16:16:27 -05:00
..
example_configurations
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
blinkm.cpp
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
blinkm.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
boards.h
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
buzzer.h
fixed warning: ISO C++ forbids compound-literals
2016-10-22 11:23:16 -05:00
cardreader.cpp
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
cardreader.h
Dynamic allocation for SDCARD_SORT_ALPHA
2017-02-14 21:37:25 -06:00
circularqueue.h
Patch up CircularQueue
2016-08-02 18:57:15 -07:00
Conditionals_LCD.h
Configurable delay for BLTouch servo emulation
2017-04-02 11:14:53 -05:00
Conditionals_post.h
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
Conditionals.h
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Configuration_adv.h
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
configuration_store.cpp
Z_DUAL_ENDSTOP - make offset a configuration item
2017-04-06 15:57:10 -05:00
configuration_store.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
Configuration.h
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
dac_mcp4728.cpp
Fix DAC current code
2016-10-17 15:17:57 -05:00
dac_mcp4728.h
Fix DAC current code
2016-10-17 15:17:57 -05:00
digipot_mcp4451.cpp
Unify config in a single include without nested includes
2016-07-25 23:04:19 -07:00
dogm_bitmaps.h
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
dogm_font_data_6x9_marlin.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_HD44780_C.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_HD44780_J.h
Update Kana font
2016-03-31 10:02:47 +09:00
dogm_font_data_HD44780_W.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_1_tr.h
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_5_Cyrillic.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_CN.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_Greek.h
Change font decent to -1 for tt and gr
2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
Update Kana font
2016-03-31 10:02:47 +09:00
dogm_font_data_Marlin_symbols.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
duration_t.h
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
endstop_interrupts.h
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
endstops.cpp
Merge pull request #5678 from Bob-the-Kuhn/G38-optional-double-tap
2017-04-02 10:32:04 -05:00
endstops.h
guaranteed BLTouch detection
2017-02-11 12:01:34 -06:00
enum.h
Implement the "manual" option for ABL
2017-03-31 11:50:18 -05:00
fastio.h
Merge pull request #4894 from thinkyhead/rc_mightyboard_rev_e
2016-10-31 08:01:41 -05:00
G26_Mesh_Validation_Tool.cpp
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
hex_print_routines.cpp
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
hex_print_routines.h
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
language_an.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_bg.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_ca.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_cn.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_cz.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_da.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_de.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_el-gr.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_el.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_en.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_es.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_eu.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_fi.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_fr.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_gl.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_hr.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_it.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_kana_utf8.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_kana.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_nl.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_pl.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_pt_utf8.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_pt-br_utf8.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_pt-br.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_pt.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_ru.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_test.h
Keep SIMULATE_ROMFONT only language.h
2016-08-15 19:11:31 -07:00
language_tr.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_uk.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_zh_CN.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language_zh_TW.h
Audible feedback for settings store/load/reset
2017-03-22 02:15:21 -05:00
language.h
Immediate commands take precedence
2017-03-19 21:50:48 -05:00
M100_Free_Mem_Chk.cpp
Further repairs to UBL, comments, spacing
2017-03-31 02:20:20 -05:00
macros.h
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
Makefile
Merge pull request #5994 from StefanBruens/fix_Makefile_errors
2017-03-29 06:32:08 -05:00
Marlin_main.cpp
add Z servo test and toggle pins to M43
2017-04-06 15:59:38 -05:00
Marlin.h
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Marlin.ino
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
MarlinConfig.h
Merge pull request #4419 from AnHardt/sd2pinmap
2016-07-28 17:38:46 -07:00
MarlinSerial.cpp
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
MarlinSerial.h
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
mesh_bed_leveling.h
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
nozzle.cpp
Apply prior nozzle clean update
2017-03-06 03:14:59 -06:00
nozzle.h
Added circle pattern for nozzle cleaning feature
2017-03-06 03:03:00 -06:00
pins_3DRAG.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_5DPRINT.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_AZTEEG_X1.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_AZTEEG_X3_PRO.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_AZTEEG_X3.h
Follow-up the PR #5087 (Fixed SERVO pins on Azteeg X3), etc
2016-10-27 06:46:03 +09:00
pins_BAM_DICE_DUE.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_BQ_ZUM_MEGA_3D.h
Updated bq Hephestos 2 example configuration
2016-12-13 09:26:07 +00:00
pins_BRAINWAVE_PRO.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_BRAINWAVE.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_CHEAPTRONIC.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_CNCONTROLS_11.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_CNCONTROLS_12.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_ELEFU_3.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_FELIX2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN3_MONOLITHIC.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN3_PLUS.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN6_DELUXE.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_GEN6.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN7_12.h
Label analog pins in a similar way
2016-10-05 06:13:30 -05:00
pins_GEN7_13.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_GEN7_14.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_GEN7_CUSTOM.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_K8200.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_K8400.h
Disable SD Detect for K8400
2016-12-28 23:21:18 +01:00
pins_LEAPFROG.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MEGACONTROLLER.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MEGATRONICS_2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MEGATRONICS_3.h
Remove unnecessary tabs and spaces
2016-12-16 00:21:32 +09:00
pins_MEGATRONICS.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MELZI_MAKR3D.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MELZI.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h
Developer note in pins_MIGHTYBOARD_REVE.h
2016-10-31 08:22:39 -05:00
pins_MINIRAMBO.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MINITRONICS.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MKS_13.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MKS_BASE.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_OMCA_A.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_OMCA.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD_REVF.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_PRINTRBOARD.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_RAMBO.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_RAMPS_13.h
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
pins_RAMPS_OLD.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_RAMPS.h
Add TMC2130 support
2016-11-21 00:17:45 -06:00
pins_RIGIDBOARD_V2.h
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
pins_RIGIDBOARD.h
Remove BEEPER_PIN override in pins_RIGIDBOARD.h
2017-03-01 18:26:29 -06:00
pins_RUMBA.h
Tweak "can not" => "can't" in RUMBA pins
2017-03-29 01:04:50 -05:00
pins_SAINSMART_2IN1.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_SANGUINOLOLU_11.h
Add Support TinyBoy2 OLED/Encoder panel
2017-03-31 04:05:34 -05:00
pins_SANGUINOLOLU_12.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_SCOOVO_X9H.h
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
pins_SETHI.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_STB_11.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_TEENSY2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_TEENSYLU.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_ULTIMAIN_2.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_ULTIMAKER_OLD.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_ULTIMAKER.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins.h
Board A4JP should be SCOOVO_X9H
2017-03-27 22:22:13 -05:00
pinsDebug_list.h
pinsDebug with more features, uses less RAM
2017-04-06 14:46:28 -05:00
pinsDebug_Teensyduino.h
Remove extraneous whitespace
2017-03-18 03:17:39 -05:00
pinsDebug.h
pinsDebug with more features, uses less RAM
2017-04-06 14:46:28 -05:00
planner_bezier.cpp
Improve planner kinematics, fix delta ABL
2016-10-09 13:32:46 -05:00
planner_bezier.h
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
planner.cpp
Syntax cleanup
2017-04-01 21:53:46 -05:00
planner.h
Cleanup to planner.cpp
2017-03-29 06:48:07 -05:00
platformio.ini
Move platformio directories out of source tree
2016-10-08 13:45:26 -04:00
point_t.h
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
printcounter.cpp
Fix single-char echo and pinMode usage
2017-03-18 11:35:20 -05:00
printcounter.h
Adds filamentUsed and longestPrint stats to PrintCounter
2016-07-16 12:12:27 +01:00
qr_solve.cpp
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
qr_solve.h
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
SanityCheck.h
Use same config name for all mesh dimensions
2017-04-06 00:42:52 -05:00
Sd2Card.cpp
Fix SD_CHECK_AND_RETRY condition
2017-02-11 23:55:56 -06:00
Sd2Card.h
repair-software-spi
2016-07-31 15:50:42 +02:00
SdBaseFile.cpp
Clear dir_t size, not pointer size
2016-10-25 22:59:40 -05:00
SdBaseFile.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
SdFatConfig.h
repair-software-spi
2016-07-31 15:50:42 +02:00
SdFatStructs.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
SdFatUtil.cpp
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
SdFatUtil.h
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
SdFile.cpp
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdFile.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
SdInfo.h
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdVolume.cpp
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdVolume.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
serial.cpp
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
serial.h
Relocate serial macros and functions
2017-04-02 01:05:25 -05:00
servo.cpp
Additional cleanup of UBL code
2017-03-22 20:51:10 -05:00
servo.h
SERVO_DEACTIVATION_DELAY => SERVO_DELAY
2016-06-23 14:33:29 -07:00
speed_lookuptable.h
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
stepper_dac.cpp
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
stepper_dac.h
Cleanup of code style
2016-10-07 15:57:24 -05:00
stepper_indirection.cpp
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
stepper_indirection.h
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
stepper.cpp
Various UBL cleanups and bug fixes
2017-03-30 17:09:49 -05:00
stepper.h
First draft of Unified Stepper / E Advance ISR
2016-12-21 01:34:39 -08:00
stopwatch.cpp
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
stopwatch.h
Updates Stopwatch class to use internal state enum
2016-07-19 14:30:44 +01:00
temperature.cpp
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
temperature.h
Fix: Thermal runaway if nonexistent bed's temp is set
2017-04-02 11:48:10 -05:00
thermistornames.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_1.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_2.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_3.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_4.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_5.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_6.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_7.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_8.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_9.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_10.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_11.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_12.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_13.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_20.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_51.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_52.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_55.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_60.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_66.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_70.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_71.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_75.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_110.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_147.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_998.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_999.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1010.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1047.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortables.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
twibus.cpp
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
twibus.h
M155=>M260, M156=>M261
2016-11-08 17:54:54 -06:00
types.h
Adds types.h
2016-07-30 02:55:52 +01:00
ubl_G29.cpp
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
ubl_motion.cpp
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
ubl.cpp
Rename all UBL files with a ubl_ prefix
2017-04-06 05:33:27 -05:00
ubl.h
Adjust indentation in ubl.h
2017-04-06 05:36:16 -05:00
ultralcd_impl_DOGM.h
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
ultralcd_impl_HD44780.h
Apply FIXFLOAT macro
2017-03-31 09:27:48 -05:00
ultralcd_st7920_u8glib_rrd.h
Distribute GLCD screen updates in time
2016-12-05 12:22:54 -06:00
ultralcd.cpp
# This is a combination of 2 commits.
2017-04-06 16:16:27 -05:00
ultralcd.h
status_printf => lcd_status_printf_P
2017-04-02 01:05:25 -05:00
utf_mapper.h
utf8-mapper for Turkish
2016-12-12 15:56:59 +01:00
utility.cpp
Add and apply WITHIN macro
2017-03-31 09:27:48 -05:00
utility.h
Replace ftostr62sign with ftostr62rj
2016-12-12 20:25:20 +01:00
vector_3.cpp
Adjust vector_3 code with const, some optimization
2017-03-23 19:41:42 -05:00
vector_3.h
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
Version.h
Document PROTOCOL_VERSION
2017-03-05 04:43:46 -06:00
watchdog.cpp
Correct comment on watchdog timer
2016-12-19 22:27:28 -08:00
watchdog.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00