Marlin_Firmware/config/examples/Malyan/M150/README.md
2019-03-03 16:50:56 -06:00

56 lines
2.1 KiB
Markdown

# Configuration for Malyan M150 HobbyKing printer
Config without automatic bed level sensor, or in other words, "as stock"
## To install:
1. Install [Arduino](https://www.arduino.cc/en/Main/Software)
1. Install U8glib
* `Sketch` -> `Include Library` -> `Manage Libraries...`
* Search for and install `U8glib` by oliver
1. Install Sanguino
* `File` -> `Preferences`
* Add
`https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json`
to `Additional Boards Manager URLs`
1. Modify Sanguino `boards.txt`
* Close Arduino
* Locate Arduino15 folder
- `C:\Users\<username>\AppData\Local\Arduino15` for Windows
- `~/.arduino15` for Linux
* Locate `boards.txt` in `packages/Sanguino/hardware/avr/1.0.2`
(version number may change)
* Add the following to the end of `boards.txt`
(note that it is the same as sanguino.menu.cpu.atmega1284p but with
a different name and upload speed)
## Malyan M150 W/ ATmega1284P 16MHz
sanguino.menu.cpu.malyan_m150=Malyan M150
sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048
sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384
sanguino.menu.cpu.malyan_m150.upload.speed=57600
sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex
sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p
sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L
1. Configure Marlin
* Copy `_Bootscreen.h`, `Configuration.h`, and `Configuration_adv.h`
from `config/examples/Malyan/M150` to `Marlin`
(overwrite files)
* Read `Configuration.h` and make any necessary changes
1. Flash Marlin
* Turn on printer while pressing scroll wheel button
* Plug printer in to computer with USB cable
* Open `Marlin/Marlin.ino` with Arduino
* Configure Arduino
- `Tools` -> `Board` -> `Sanguino`
- `Tools` -> `Processor` -> `Malyan M150`
- `Tools` -> `Port` -> Select your port
* `Sketch` -> `Upload` or click arrow in top right corner