bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin
History
Dave Johnson 4718c09c48 Remove extraneous USBCON defines for AT90USB boards 
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
..
example_configurations
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
blinkm.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
blinkm.h
…
boards.h
Support for Creality CR-10
2017-07-06 23:08:10 -05:00
buzzer.h
Spacing, const, comments
2017-06-07 16:07:38 -05:00
cardreader.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
cardreader.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
circularqueue.h
…
Conditionals_LCD.h
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
Conditionals_post.h
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
Conditionals.h
…
Configuration_adv.h
Improve FWRETRACT config options and commentary
2017-07-20 22:57:50 -05:00
configuration_store.cpp
Implement the EEPROM_CHITCHAT option
2017-07-01 21:48:18 -05:00
configuration_store.h
Expose DISABLE_M503 option as a test option
2017-07-01 21:31:28 -05:00
Configuration.h
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
dac_mcp4728.cpp
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
dac_mcp4728.h
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp
Fix: set digipot mcp4018 Vrefmax to 1.666V
2017-06-24 12:35:34 -05:00
digipot_mcp4451.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
dogm_bitmaps.h
…
dogm_font_data_6x9_marlin.h
…
dogm_font_data_HD44780_C.h
…
dogm_font_data_HD44780_J.h
Update Kana font
2016-03-31 10:02:47 +09:00
dogm_font_data_HD44780_W.h
…
dogm_font_data_ISO10646_1_PL.h
Polish font
2017-04-21 21:42:41 -05:00
dogm_font_data_ISO10646_1_tr.h
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
…
dogm_font_data_ISO10646_5_Cyrillic.h
…
dogm_font_data_ISO10646_CN.h
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
dogm_font_data_ISO10646_CZ.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
dogm_font_data_ISO10646_Greek.h
…
dogm_font_data_ISO10646_Kana.h
…
dogm_font_data_Marlin_symbols.h
…
duration_t.h
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
endstop_interrupts.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
endstops.cpp
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
endstops.h
guaranteed BLTouch detection
2017-02-11 12:01:34 -06:00
enum.h
CNC workspace planes and 'P' argument for G2/G3
2017-06-23 14:53:03 -05:00
fastio_168.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_644.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1280.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1281.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_AT90USB.h
Tweaks for M43
2017-07-06 21:47:50 -05:00
fastio.h
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
G26_Mesh_Validation_Tool.cpp
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
gcode.cpp
Fix compile issue with G38
2017-07-06 14:21:27 -05:00
gcode.h
Volatile keyword not needed for parser.seen
2017-07-10 15:38:54 -05:00
hex_print_routines.cpp
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
hex_print_routines.h
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
I2CPositionEncoder.cpp
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
I2CPositionEncoder.h
Followup for I2C_POSITION_ENCODERS
2017-06-27 20:46:40 -05:00
language_an.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_bg.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_ca.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_cn.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_cz_utf8.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
language_cz.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
language_da.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_de.h
Followup to German language update
2017-06-10 16:27:39 -05:00
language_el-gr.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_el.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_en.h
Merge pull request #7260 from thinkyhead/bf_G33_update_27
2017-07-10 13:39:36 -05:00
language_es.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_eu.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_fi.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_fr.h
French translation
2017-06-22 12:49:23 -05:00
language_gl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_hr.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_it.h
added missing italian translation
2017-06-21 11:08:39 +02:00
language_kana_utf8.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
language_kana.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_nl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl-DOGM.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl-HD44780.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pt_utf8.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
language_pt-br_utf8.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
language_pt-br.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_pt.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_ru.h
Update Russian translation - Part 1
2017-07-21 19:32:37 -05:00
language_test.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_tr.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_uk.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_zh_CN.h
Fix spelling of "Chinese"
2017-07-03 15:24:49 -05:00
language_zh_TW.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
least_squares_fit.cpp
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
least_squares_fit.h
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
M100_Free_Mem_Chk.cpp
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
macros.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Makefile
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
Marlin_main.cpp
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
Marlin.h
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Marlin.ino
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
MarlinConfig.h
…
MarlinSerial.cpp
Tweak some else clauses
2017-06-10 16:40:10 -05:00
MarlinSerial.h
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
mesh_bed_leveling.h
Formatting and spelling
2017-06-18 23:01:12 -05:00
nozzle.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
nozzle.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
pca9632.cpp
PCA9632 PWM color LED support
2017-06-12 01:09:24 -05:00
pca9632.h
PCA9632 PWM color LED support
2017-06-12 01:09:24 -05:00
pins_3DRAG.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_5DPRINT.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_ANET_10.h
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
pins_AZTEEG_X1.h
…
pins_AZTEEG_X3_PRO.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_AZTEEG_X3.h
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
pins_BAM_DICE_DUE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_BQ_ZUM_MEGA_3D.h
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
pins_BRAINWAVE_PRO.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_BRAINWAVE.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_CHEAPTRONIC.h
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-06 22:47:51 -05:00
pins_CHEAPTRONICv2.h
Easier override of FILWIDTH_PIN
2017-06-02 12:05:46 -05:00
pins_CNCONTROLS_11.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_CNCONTROLS_12.h
…
pins_ELEFU_3.h
…
pins_FELIX2.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN3_MONOLITHIC.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN3_PLUS.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN6_DELUXE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN6.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_GEN7_12.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_13.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_14.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_CUSTOM.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_K8200.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_K8400.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_LEAPFROG.h
…
pins_MEGACONTROLLER.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_MEGATRONICS_2.h
added shift register pins for reprapworld keypad v1.1
2017-06-09 14:17:47 +02:00
pins_MEGATRONICS_3.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_MEGATRONICS.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_MELZI_CREALITY.h
Support for Creality CR-10
2017-07-06 23:08:10 -05:00
pins_MELZI_MAKR3D.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MELZI.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_MINIRAMBO.h
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
pins_MINITRONICS.h
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-06 22:47:51 -05:00
pins_MKS_13.h
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 18:50:05 -05:00
pins_MKS_BASE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_OMCA_A.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_OMCA.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_PRINTRBOARD_REVF.h
Clean up excess whitespace
2017-07-06 21:24:30 -05:00
pins_PRINTRBOARD.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_RAMBO.h
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
pins_RAMPS_13.h
…
pins_RAMPS_OLD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_RAMPS.h
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 18:50:05 -05:00
pins_RIGIDBOARD_V2.h
Need to define this for Rigidboard V2
2017-04-30 19:04:27 -05:00
pins_RIGIDBOARD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_RUMBA.h
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
pins_SAINSMART_2IN1.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_SANGUINOLOLU_11.h
Support for Creality CR-10
2017-07-06 23:08:10 -05:00
pins_SANGUINOLOLU_12.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_SCOOVO_X9H.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_SETHI.h
Formatting adjustments
2017-06-15 15:25:24 -05:00
pins_STB_11.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_TEENSY2.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_TEENSYLU.h
Remove extraneous USBCON defines for AT90USB boards
2017-07-23 16:41:48 -07:00
pins_ULTIMAIN_2.h
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
pins_ULTIMAKER_OLD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_ULTIMAKER.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_ZRIB_V20.h
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
pins.h
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
2017-07-07 03:22:47 -05:00
pinsDebug_list.h
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
pinsDebug_plus_70.h
Reject generous donation of trailing whitespace
2017-06-15 15:25:24 -05:00
pinsDebug_Teensyduino.h
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
pinsDebug.h
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
2017-06-27 08:04:40 +01:00
planner_bezier.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
planner_bezier.h
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
planner.cpp
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
planner.h
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
point_t.h
…
printcounter.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
printcounter.h
Cosmetic patches
2017-04-26 06:24:23 -05:00
SanityCheck.h
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:07:55 -05:00
Sd2Card.cpp
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
Sd2Card.h
Removed check for 2560 family
2017-06-04 22:16:27 -05:00
SdBaseFile.cpp
Reference op with variable name
2017-05-28 11:33:22 -05:00
SdBaseFile.h
Reference op with variable name
2017-05-28 11:33:22 -05:00
SdFatConfig.h
…
SdFatStructs.h
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
SdFatUtil.cpp
Further cleanup of comments, partial Doxygen-style
2016-03-25 00:45:56 -07:00
SdFatUtil.h
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
SdFile.cpp
…
SdFile.h
…
SdInfo.h
…
SdVolume.cpp
…
SdVolume.h
…
serial.cpp
Add proportional font adjustment ratio
2017-05-10 17:19:03 -04:00
serial.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
servo.cpp
Apply const, spacing, etc.
2017-06-27 05:23:49 -05:00
servo.h
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
softspi.h
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
speed_lookuptable.h
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
spi.h
Use new attribute macros in more places
2017-05-22 17:38:58 -05:00
stepper_dac.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_dac.h
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_indirection.cpp
Formatting adjustments
2017-06-15 15:25:24 -05:00
stepper_indirection.h
Add support for Průša MK2 Multiplexer
2017-06-27 04:55:30 -05:00
stepper.cpp
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
stepper.h
Edit digipot currents via LCD, save to EEPROM
2017-06-25 01:02:36 -05:00
stopwatch.cpp
General comment cleanup
2017-04-08 18:58:33 -05:00
stopwatch.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
temperature.cpp
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
temperature.h
Add Skynet/ANET A10 support
2017-06-24 19:07:03 -05:00
thermistornames.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_1.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_2.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_3.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_4.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_5.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_6.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_7.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_8.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_9.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_10.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_11.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_12.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_13.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_20.h
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
thermistortable_51.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_52.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_55.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_60.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_66.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_70.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_71.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_75.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_110.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_147.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_998.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_999.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1010.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1047.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortables.h
Misc. Clean Up (#6822)
2017-05-21 22:09:51 -05:00
twibus.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
twibus.h
Clean up some trailing spaces
2017-07-01 22:32:20 -05:00
types.h
…
ubl_G29.cpp
Corrections (#7231)
2017-07-07 11:05:08 -05:00
ubl_motion.cpp
Clean up some trailing spaces
2017-07-01 22:32:20 -05:00
ubl.cpp
Followup to #7045
2017-06-16 14:18:19 -05:00
ubl.h
Added option 'H' to G29 P4.
2017-06-25 17:14:08 -05:00
ultralcd_impl_DOGM.h
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
ultralcd_impl_HD44780.h
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
ultralcd_st7920_u8glib_rrd.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
ultralcd.cpp
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
ultralcd.h
Add PROBE_MANUALLY support to G33
2017-07-04 18:06:54 -05:00
utf_mapper.h
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
utility.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
utility.h
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
vector_3.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
vector_3.h
Reference op with variable name
2017-05-28 11:33:22 -05:00
Version.h
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
watchdog.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
watchdog.h
…