Support for Creality CR-10
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
This commit is contained in:
essgcee
Scott Lahteine
parent
ce834bb78e
commit
61be28133d
@ -54,9 +54,10 @@
|
||||
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
|
||||
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
|
||||
#define BOARD_MELZI 63 // Melzi
|
||||
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
|
||||
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
|
||||
#define BOARD_STB_11 64 // STB V1.1
|
||||
#define BOARD_AZTEEG_X1 65 // Azteeg X1
|
||||
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
|
||||
#define BOARD_AZTEEG_X3 67 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
|
||||
#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone)
|
||||
|
||||
1642
Marlin/example_configurations/Creality/CR-10/Configuration.h
Normal file
1642
Marlin/example_configurations/Creality/CR-10/Configuration.h
Normal file
File diff suppressed because it is too large
Load Diff
@ -97,12 +97,14 @@
|
||||
#include "pins_SANGUINOLOLU_12.h"
|
||||
#elif MB(MELZI)
|
||||
#include "pins_MELZI.h"
|
||||
#elif MB(MELZI_MAKR3D)
|
||||
#include "pins_MELZI_MAKR3D.h"
|
||||
#elif MB(MELZI_CREALITY)
|
||||
#include "pins_MELZI_CREALITY.h"
|
||||
#elif MB(STB_11)
|
||||
#include "pins_STB_11.h"
|
||||
#elif MB(AZTEEG_X1)
|
||||
#include "pins_AZTEEG_X1.h"
|
||||
#elif MB(MELZI_MAKR3D)
|
||||
#include "pins_MELZI_MAKR3D.h"
|
||||
#elif MB(AZTEEG_X3)
|
||||
#include "pins_AZTEEG_X3.h"
|
||||
#elif MB(AZTEEG_X3_PRO)
|
||||
|
||||
100
Marlin/pins_MELZI_CREALITY.h
Normal file
100
Marlin/pins_MELZI_CREALITY.h
Normal file
@ -0,0 +1,100 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Melzi (Creality) pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "Melzi Creality"
|
||||
|
||||
#ifdef __AVR_ATmega1284P__
|
||||
#define LARGE_FLASH true
|
||||
#endif
|
||||
|
||||
// For the stock CR-10 use the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
// option for the display in Configuration.h
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
||||
#undef LCD_SDSS
|
||||
#undef LED_PIN
|
||||
|
||||
#undef LCD_PINS_RS
|
||||
#undef LCD_PINS_ENABLE
|
||||
|
||||
#define LCD_PINS_RS 28 // st9720 CS
|
||||
#define LCD_PINS_ENABLE 17 // st9720 DAT
|
||||
|
||||
#undef LCD_PINS_D4
|
||||
#undef LCD_PINS_D5
|
||||
#undef LCD_PINS_D6
|
||||
#undef LCD_PINS_D7
|
||||
|
||||
#define LCD_PINS_D4 30 // st9720 CLK
|
||||
|
||||
/**
|
||||
PIN: 0 Port: B0 E0_DIR_PIN protected
|
||||
PIN: 1 Port: B1 E0_STEP_PIN protected
|
||||
PIN: 2 Port: B2 Z_DIR_PIN protected
|
||||
PIN: 3 Port: B3 Z_STEP_PIN protected
|
||||
PIN: 4 Port: B4 AVR_SS_PIN protected
|
||||
. FAN_PIN protected
|
||||
. SS_PIN protected
|
||||
PIN: 5 Port: B5 AVR_MOSI_PIN Output = 1
|
||||
. MOSI_PIN Output = 1
|
||||
PIN: 6 Port: B6 AVR_MISO_PIN Input = 0 TIMER3A PWM: 0 WGM: 1 COM3A: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0
|
||||
. MISO_PIN Input = 0
|
||||
PIN: 7 Port: B7 AVR_SCK_PIN Output = 0 TIMER3B PWM: 0 WGM: 1 COM3B: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0
|
||||
. SCK_PIN Output = 0
|
||||
PIN: 8 Port: D0 RXD Input = 1
|
||||
PIN: 9 Port: D1 TXD Input = 0
|
||||
PIN: 10 Port: D2 BTN_EN2 Input = 1
|
||||
PIN: 11 Port: D3 BTN_EN1 Input = 1
|
||||
PIN: 12 Port: D4 HEATER_BED_PIN protected
|
||||
PIN: 13 Port: D5 HEATER_0_PIN protected
|
||||
PIN: 14 Port: D6 E0_ENABLE_PIN protected
|
||||
. X_ENABLE_PIN protected
|
||||
. Y_ENABLE_PIN protected
|
||||
PIN: 15 Port: D7 X_STEP_PIN protected
|
||||
PIN: 16 Port: C0 BTN_ENC Input = 1
|
||||
. SCL Input = 1
|
||||
PIN: 17 Port: C1 LCD_PINS_ENABLE Output = 0
|
||||
. SDA Output = 0
|
||||
PIN: 18 Port: C2 X_MIN_PIN protected
|
||||
. X_STOP_PIN protected
|
||||
PIN: 19 Port: C3 Y_MIN_PIN protected
|
||||
. Y_STOP_PIN protected
|
||||
PIN: 20 Port: C4 Z_MIN_PIN protected
|
||||
. Z_STOP_PIN protected
|
||||
PIN: 21 Port: C5 X_DIR_PIN protected
|
||||
PIN: 22 Port: C6 Y_STEP_PIN protected
|
||||
PIN: 23 Port: C7 Y_DIR_PIN protected
|
||||
PIN: 24 Port: A7 TEMP_0_PIN protected
|
||||
PIN: 25 Port: A6 TEMP_BED_PIN protected
|
||||
PIN: 26 Port: A5 Z_ENABLE_PIN protected
|
||||
PIN: 27 Port: A4 BEEPER_PIN Output = 0
|
||||
PIN: 28 Port: A3 LCD_PINS_RS Output = 0
|
||||
PIN: 29 Port: A2 <unused/unknown> Input = 0
|
||||
PIN: 30 Port: A1 LCD_PINS_D4 Output = 1
|
||||
PIN: 31 Port: A0 SDSS Output = 1
|
||||
*/
|
||||
@ -59,7 +59,7 @@
|
||||
#define BOARD_NAME "Sanguinololu <1.2"
|
||||
#endif
|
||||
|
||||
#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
|
||||
#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D) || MB(MELZI_CREALITY))
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
|
||||
Loading…
Reference in New Issue
Block a user