bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin
History
Scott Lahteine 37bc0fce62 Make G29 compatible with M206 Z and G92 Z 
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
2017-06-20 00:09:59 -05:00
..
example_configurations
Merge pull request #7060 from bgort/i2cpefix
2017-06-19 01:08:42 -05:00
blinkm.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
blinkm.h
…
boards.h
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
buzzer.h
Spacing, const, comments
2017-06-07 16:07:38 -05:00
cardreader.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
cardreader.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
circularqueue.h
Patch up CircularQueue
2016-08-02 18:57:15 -07:00
Conditionals_LCD.h
Fix missing LCD_STR_REFRESH
2017-06-12 01:28:52 -05:00
Conditionals_post.h
Remove ADVANCED_PAUSE_FEATURE requirement for PROBING_HEATERS_OFF (#7000)
2017-06-12 00:22:31 -05:00
Conditionals.h
Make Conditionals.h a catch-all for old configs
2016-07-30 04:25:30 -07:00
Configuration_adv.h
Merge pull request #7060 from bgort/i2cpefix
2017-06-19 01:08:42 -05:00
configuration_store.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
configuration_store.h
Fix broken EEPROM save/load
2017-05-17 12:41:27 -04:00
Configuration.h
Support for two switching extruders
2017-06-19 17:20:59 -05:00
dac_mcp4728.cpp
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
dac_mcp4728.h
Fix get/setDrvPct declarations
2017-06-09 20:21:28 -07:00
digipot_mcp4018.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
digipot_mcp4451.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
dogm_bitmaps.h
Updates u8glib's bmp2hex converter
2016-07-19 03:16:30 +01:00
dogm_font_data_6x9_marlin.h
…
dogm_font_data_HD44780_C.h
…
dogm_font_data_HD44780_J.h
…
dogm_font_data_HD44780_W.h
…
dogm_font_data_ISO10646_1_PL.h
Polish font
2017-04-21 21:42:41 -05:00
dogm_font_data_ISO10646_1_tr.h
Improve M600 with timeout, wait for heatup.
2017-02-15 05:29:34 -06:00
dogm_font_data_ISO10646_1.h
…
dogm_font_data_ISO10646_5_Cyrillic.h
…
dogm_font_data_ISO10646_CN.h
…
dogm_font_data_ISO10646_Greek.h
Change font decent to -1 for tt and gr
2016-11-26 02:29:23 +01:00
dogm_font_data_ISO10646_Kana.h
…
dogm_font_data_Marlin_symbols.h
…
duration_t.h
Fix formatting of print time hours above one day
2017-03-01 18:55:25 +02:00
endstop_interrupts.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
endstops.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
endstops.h
guaranteed BLTouch detection
2017-02-11 12:01:34 -06:00
enum.h
[New Feature] I2C position encoder support (#6946)
2017-06-09 08:06:23 -04:00
fastio_168.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_644.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1280.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_1281.h
Split up fastio.h, document pin mappings
2017-05-21 10:33:27 -05:00
fastio_AT90USB.h
Unify AVR90USB: fastio changes
2017-06-09 18:21:57 -05:00
fastio.h
Drop fastio timer cruft
2017-06-15 14:43:40 -05:00
G26_Mesh_Validation_Tool.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
gcode.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
gcode.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
hex_print_routines.cpp
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
hex_print_routines.h
New GCode Parser - Implementation
2017-05-23 14:15:10 -05:00
I2CPositionEncoder.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
I2CPositionEncoder.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
language_an.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_bg.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_ca.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_cn.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_cz.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_da.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_de.h
Followup to German language update
2017-06-10 16:27:39 -05:00
language_el-gr.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_el.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_en.h
Followup to #7045
2017-06-16 14:18:19 -05:00
language_es.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_eu.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_fi.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_fr.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_gl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_hr.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_it.h
Fix Italian language mapper
2017-06-19 01:01:40 -05:00
language_kana_utf8.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_kana.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_nl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl-DOGM.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl-HD44780.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pl.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_pt_utf8.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_pt-br_utf8.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_pt-br.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_pt.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_ru.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_test.h
MSG_VOLUMETRIC => MSG_FILAMENT
2017-04-17 16:39:36 -05:00
language_tr.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_uk.h
Case light as a toggle menu item
2017-05-28 14:32:07 -05:00
language_zh_CN.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language_zh_TW.h
Add more options to the Bed Leveling menu
2017-05-28 14:04:28 -05:00
language.h
M421 Mesh Point Offset and misc. UBL clean up (#6685)
2017-05-10 18:54:10 -05:00
least_squares_fit.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
least_squares_fit.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
M100_Free_Mem_Chk.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
macros.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Makefile
fix missing serial.cpp in Makefile
2017-04-17 11:59:03 +02:00
Marlin_main.cpp
Make G29 compatible with M206 Z and G92 Z
2017-06-20 00:09:59 -05:00
Marlin.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
Marlin.ino
TMC2130 Library: @teemuatlut replaces @makertum
2017-03-07 04:22:06 -06:00
MarlinConfig.h
Merge pull request #4419 from AnHardt/sd2pinmap
2016-07-28 17:38:46 -07:00
MarlinSerial.cpp
Tweak some else clauses
2017-06-10 16:40:10 -05:00
MarlinSerial.h
Patch MarlinSerial to match up with 32-bit version
2017-04-02 04:39:18 -05:00
mesh_bed_leveling.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
mesh_bed_leveling.h
Formatting and spelling
2017-06-18 23:01:12 -05:00
nozzle.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
nozzle.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
pca9632.cpp
PCA9632 PWM color LED support
2017-06-12 01:09:24 -05:00
pca9632.h
PCA9632 PWM color LED support
2017-06-12 01:09:24 -05:00
pins_3DRAG.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_5DPRINT.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_AZTEEG_X1.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_AZTEEG_X3_PRO.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_AZTEEG_X3.h
Cleanup of spacing and formatting
2017-06-04 11:31:43 -05:00
pins_BAM_DICE_DUE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_BQ_ZUM_MEGA_3D.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_BRAINWAVE_PRO.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_BRAINWAVE.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_CHEAPTRONIC.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_CHEAPTRONICv2.h
Easier override of FILWIDTH_PIN
2017-06-02 12:05:46 -05:00
pins_CNCONTROLS_11.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_CNCONTROLS_12.h
Predefine auto fan pins in some pins files
2016-10-26 18:38:32 -05:00
pins_ELEFU_3.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_FELIX2.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN3_MONOLITHIC.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN3_PLUS.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN6_DELUXE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN6.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_GEN7_12.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_13.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_14.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_GEN7_CUSTOM.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_K8200.h
Add "About Printer" information menu.
2016-07-02 15:22:26 -07:00
pins_K8400.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_LEAPFROG.h
Follow-up the PR #4955, etc
2016-10-10 14:22:43 +09:00
pins_MEGACONTROLLER.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_MEGATRONICS_2.h
added shift register pins for reprapworld keypad v1.1
2017-06-09 14:17:47 +02:00
pins_MEGATRONICS_3.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_MEGATRONICS.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_MELZI_MAKR3D.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MELZI.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_MIGHTYBOARD_REVE.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_MINIRAMBO.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_MINITRONICS.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_MKS_13.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_MKS_BASE.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_OMCA_A.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_OMCA.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_PRINTRBOARD_REVF.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_PRINTRBOARD.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_RAMBO.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_RAMPS_13.h
pins_RAMPS_14.h => pins_RAMPS.h
2016-07-30 04:17:21 -07:00
pins_RAMPS_OLD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_RAMPS.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_RIGIDBOARD_V2.h
Need to define this for Rigidboard V2
2017-04-30 19:04:27 -05:00
pins_RIGIDBOARD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_RUMBA.h
Pins-related cleanup, formatting
2017-05-21 07:18:03 -05:00
pins_SAINSMART_2IN1.h
Patch pins files hotends/e-steppers sanity check
2017-04-07 10:46:33 -05:00
pins_SANGUINOLOLU_11.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_SANGUINOLOLU_12.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_SAV_MKI.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_SCOOVO_X9H.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_SETHI.h
Formatting adjustments
2017-06-15 15:25:24 -05:00
pins_STB_11.h
#if defined => #ifdef / PIN_EXISTS
2017-03-22 20:51:11 -05:00
pins_TEENSY2.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_TEENSYLU.h
Unify AVR90USB: Pins remap to Arduino
2017-06-09 18:48:12 -05:00
pins_ULTIMAIN_2.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_ULTIMAKER_OLD.h
SPINDLE/LASER pins changes
2017-05-17 04:23:06 -05:00
pins_ULTIMAKER.h
Unify AVR90USB: Pins cleanup
2017-06-09 18:48:12 -05:00
pins_ZRIB_V20.h
Support for ZRIB v2.0 Control Board
2017-06-02 12:05:46 -05:00
pins.h
Support for two switching extruders
2017-06-19 17:20:59 -05:00
pinsDebug_list.h
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-10 22:01:15 -05:00
pinsDebug_plus_70.h
Reject generous donation of trailing whitespace
2017-06-15 15:25:24 -05:00
pinsDebug_Teensyduino.h
Unify AVR90USB: pinsDebug changes
2017-06-09 19:20:16 -05:00
pinsDebug.h
fix pinsDebug.h error, add capability to display more than 70 pins.
2017-06-10 22:01:15 -05:00
planner_bezier.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
planner_bezier.h
Append units to feedrate variables
2016-07-17 13:29:41 -07:00
planner.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
planner.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
point_t.h
Adds missing documentation to the point_t structure
2016-07-22 15:19:20 +01:00
printcounter.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
printcounter.h
Cosmetic patches
2017-04-26 06:24:23 -05:00
qr_solve.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
qr_solve.h
Enable ABL by type, support bilinear on cartesian
2016-09-25 23:35:37 -05:00
SanityCheck.h
Support for two switching extruders
2017-06-19 17:20:59 -05:00
Sd2Card.cpp
Format hex values as uppercase
2017-04-21 21:42:41 -05:00
Sd2Card.h
Removed check for 2560 family
2017-06-04 22:16:27 -05:00
SdBaseFile.cpp
Reference op with variable name
2017-05-28 11:33:22 -05:00
SdBaseFile.h
Reference op with variable name
2017-05-28 11:33:22 -05:00
SdFatConfig.h
repair-software-spi
2016-07-31 15:50:42 +02:00
SdFatStructs.h
…
SdFatUtil.cpp
…
SdFatUtil.h
Cleanup SdFatUtil.h
2016-08-11 12:47:06 -07:00
SdFile.cpp
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdFile.h
…
SdInfo.h
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdVolume.cpp
Converted all files on src to Unix file format
2016-04-26 21:23:39 +01:00
SdVolume.h
…
serial.cpp
Add proportional font adjustment ratio
2017-05-10 17:19:03 -04:00
serial.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
servo.cpp
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
servo.h
Add macros for delays by machine cycle
2017-04-11 09:18:32 -05:00
softspi.h
Clean up excess whitespace, comment formatting
2017-04-28 18:32:38 -05:00
speed_lookuptable.h
Spacing, cleanup in speed_lookuptable.h
2016-12-19 14:52:45 -08:00
spi.h
Use new attribute macros in more places
2017-05-22 17:38:58 -05:00
stepper_dac.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_dac.h
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
stepper_indirection.cpp
Formatting adjustments
2017-06-15 15:25:24 -05:00
stepper_indirection.h
Support for two switching extruders
2017-06-19 17:20:59 -05:00
stepper.cpp
Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0
2017-06-19 14:02:17 -05:00
stepper.h
Patch some serial macros
2017-06-09 17:17:23 -05:00
stopwatch.cpp
General comment cleanup
2017-04-08 18:58:33 -05:00
stopwatch.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
temperature.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
temperature.h
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
thermistornames.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_1.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_2.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_3.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_4.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_5.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_6.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_7.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_8.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_9.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_10.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_11.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_12.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_13.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_20.h
Tweaks to temperature code
2017-06-15 15:25:23 -05:00
thermistortable_51.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_52.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_55.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_60.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_66.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_70.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_71.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_75.h
Add Thermistor 75: MGB18 silicon pad
2017-03-18 11:35:20 -05:00
thermistortable_110.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_147.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_998.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_999.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1010.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortable_1047.h
Split up thermistor tables
2016-12-19 14:47:54 -08:00
thermistortables.h
Misc. Clean Up (#6822)
2017-05-21 22:09:51 -05:00
twibus.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
twibus.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
types.h
Adds types.h
2016-07-30 02:55:52 +01:00
ubl_G29.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
ubl_motion.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
ubl.cpp
Followup to #7045
2017-06-16 14:18:19 -05:00
ubl.h
Patch some serial macros
2017-06-09 17:17:23 -05:00
ultralcd_impl_DOGM.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
ultralcd_impl_HD44780.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
ultralcd_st7920_u8glib_rrd.h
Patch #else / #endif comments
2017-05-09 12:37:23 -05:00
ultralcd.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
ultralcd.h
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
utf_mapper.h
Simplify counting of printable characters
2017-05-31 23:45:41 -05:00
utility.cpp
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
utility.h
convert DAC percent to uint8_t
2017-06-19 17:46:41 -05:00
vector_3.cpp
Apply maths macros and type changes ahead of HAL
2017-06-19 22:57:42 -05:00
vector_3.h
Reference op with variable name
2017-05-28 11:33:22 -05:00
Version.h
bugfix-1.1.x ReadMe, Version, helper scripts
2017-05-04 07:17:10 -05:00
watchdog.cpp
Patch some serial macros
2017-06-09 17:17:23 -05:00
watchdog.h
…