Ian Jackson 0c35facc94 Makefile: support V=1 ...

Often it can be useful to see the actual commands being run by make.
Other projects (eg, the Linux kernel) support this with a "V=1" make
parameter.  Do the same here.

Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>

2012-08-10 19:36:29 +01:00

..

Gen7

Fix cast warning in Gen7

2012-02-23 18:50:05 +01:00

hardware/tools/avr/etc

ATMega1284P support for Arduino IDE

2012-02-17 11:41:47 +01:00

Sanguino

Fixed compiler warning for Sanguino compile

2012-02-26 17:35:01 +01:00

cardreader.cpp

made prepare->autostart independent of current folder.

2012-03-19 20:24:40 +01:00

cardreader.h

__ header file replace

2012-06-02 20:44:17 +02:00

Configuration_adv.h

Support step motor controllers with active low step pins.

2012-06-29 16:27:47 +02:00

Configuration.h

Fixed soft limits when the origin is in the middle.

2012-07-14 22:24:26 +02:00

COPYING

first commit

2011-08-12 22:28:35 +02:00

create_speed_lookuptable.py

Added 20MHz support.

2012-03-11 12:25:04 +01:00

createTemperatureLookup.py

first commit

2011-08-12 22:28:35 +02:00

EEPROMwrite.h

__ header file replace

2012-06-02 20:44:17 +02:00

fastio.h

Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1

2012-02-13 13:07:55 +01:00

language.h

added firmware retract. disabled by default

2012-06-02 20:32:28 +02:00

Makefile

Makefile: support V=1

2012-08-10 19:36:29 +01:00

Marlin.h

__ header file replace

2012-06-02 20:44:17 +02:00

Marlin.pde

Marlin.pde: include comment for emacs mode

2012-08-10 19:36:29 +01:00

MarlinSerial.cpp

Teensylu support.

2012-02-09 19:27:45 +01:00

MarlinSerial.h

Teensylu support.

2012-02-09 19:27:45 +01:00

motion_control.cpp

Fixed typo in arc

2012-04-02 17:19:20 +02:00

motion_control.h

Removed interrupt nesting in the stepper ISR.

2011-11-27 21:12:55 +01:00

pins.h

Fixed soft limits when the origin is in the middle.

2012-07-14 22:24:26 +02:00

planner.cpp

Fixed AD595 define

2012-06-11 17:33:42 +02:00

planner.h

Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer.

2012-05-09 08:05:13 +03:00

Sd2Card.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2Card.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

Sd2PinMap.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdBaseFile.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdBaseFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatConfig.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatStructs.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFatUtil.cpp

Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0.

2012-02-11 16:02:47 +01:00

SdFatUtil.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdFile.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdInfo.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.cpp

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

SdVolume.h

made sd code only compile with SDSUPPORT defined. safes 10k of codespace

2011-12-26 09:28:51 +01:00

speed_lookuptable.h

Added 20MHz support.

2012-03-11 12:25:04 +01:00

stepper.cpp

Fixed typo

2012-07-14 17:25:35 +03:00

stepper.h

merging

2011-12-12 20:35:46 +01:00

temperature.cpp

Limit PID autotune PWM to PID_MAX

2012-05-16 19:32:23 +02:00

temperature.h

Added support for 2nd extruder temperature to UltraLCD

2012-04-27 14:51:32 +02:00

thermistortables.h

Merge pull request #170 from linagee/Marlin_v1

2012-06-02 03:46:56 -07:00

ultralcd.h

__ header file replace

2012-06-02 20:44:17 +02:00

ultralcd.pde

Fixed AD595 define

2012-06-11 17:33:42 +02:00

watchdog.h

__ header file replace

2012-06-02 20:44:17 +02:00

watchdog.pde

simplified the includes, makefile now works with arduino23

2011-12-22 14:55:45 +01:00

wiring.h

add wiring.h, that can be used to overwrite:

2011-12-22 14:57:28 +01:00