02fec89a0d
Turn fans off in zero_fan_speeds
...
Addressing #13231
2019-02-22 21:00:44 -06:00
15aa932aa6
HAL for Linux ( #13146 )
2019-02-22 19:09:10 -06:00
5eb82ca6a8
Change SSD1306_OLED_I2C_CONTROLLER to HAS_SSD1306_OLED_I2C ( #13223 )
2019-02-22 19:08:36 -06:00
109e67169c
Define G21 as NOOP w/o INCH_MODE_SUPPORT ( #13229 )
...
Ticket #13228
If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
2019-02-22 15:35:32 -06:00
31b0be74af
Fix autotemp_factor menu setting ( #13226 )
...
Fix #12643
Only factors above 1 can have a 'positive' effect.
2019-02-22 15:30:17 -06:00
f6ab62bc13
Fix Creality CR-10 S5 filament change ( #13219 )
2019-02-21 05:40:49 -06:00
9f5e4e5ad8
Update LPC1769 Pins Files ( #13183 )
2019-02-21 00:54:05 -06:00
608a6810e7
Fix DOGLCD_A0 pin in pins_Smoothieboard.h ( #13217 )
2019-02-20 18:08:49 -06:00
80359c9937
Add more parameters to M240
...
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com >
2019-02-20 14:51:36 -06:00
a43e892fb5
Use 8-bit i2c address on LPC platform
...
Fix #9799 — hopefully not a unicorn
2019-02-20 06:27:26 -06:00
631d867dc9
HAL cleanups
2019-02-20 06:27:26 -06:00
89bbc30a09
Fix init of power supply pin
...
Fix #13184
2019-02-20 05:29:05 -06:00
44c22e3935
Provide a default MAX6675_SS_PIN for ReARM
...
See #8010
2019-02-20 05:06:06 -06:00
3c9a7926c2
Fix compile error with JUNCTION_DEVIATION
...
See #13000
2019-02-20 04:54:26 -06:00
758c6c9464
Very minor SPI speedup
2019-02-20 04:36:23 -06:00
422dd6666e
Fix Due EEPROM write bug
...
See #13065
2019-02-20 04:36:23 -06:00
03e109c4a3
FLASH_EEPROM => FLASH_EEPROM_EMULATION
2019-02-20 04:36:23 -06:00
50917ccda6
Tweak some u8g interface code
2019-02-20 04:26:34 -06:00
ba39186364
TMC_DEBUG optimization and improvements ( #13135 )
2019-02-20 02:22:42 -06:00
1424b368cf
Tweak M122 comment in configs
2019-02-19 16:20:18 -06:00
3a1b6fe8c1
Coding standards
2019-02-19 14:58:39 -06:00
19af90face
Fix a host action compile error ( #13208 )
2019-02-19 14:47:31 -06:00
992cdc8d14
Fix host action / G-code ordering in event_probe_failure ( #13207 )
...
Observing from the console, it makes the most sense to do `//action:probe_retry` before executing commands.
2019-02-19 14:45:03 -06:00
33a6d52965
Fix a RAPTOR2 pin conflict ( #13205 )
2019-02-19 14:42:02 -06:00
52665f54ad
Fix bad Purge More logic ( #13193 )
2019-02-19 14:37:18 -06:00
18458ec42b
Error in Smoothieboard for unsupported display
2019-02-19 14:17:33 -06:00
d4ed9b3ef1
Babystep also requires homing ( #13191 )
2019-02-17 14:35:45 -06:00
ca7b2f574f
Fix condition on tool change filament swap menu ( #13190 )
2019-02-17 12:33:46 -06:00
208ab8b366
Fix compilation with one service interval ( #13185 )
2019-02-17 12:32:47 -06:00
567d03a269
Update Slovak language ( #13187 )
2019-02-17 12:29:49 -06:00
c041eec699
Update G-code syntax for Sublime
2019-02-16 19:46:46 -06:00
27203c62b8
Enable M240, set photo pins for 3DFabXYZ i3 ( #13174 )
2019-02-15 21:16:39 -06:00
3025ddf179
Support for Creality CR-10 5S ( #13173 )
2019-02-15 21:09:44 -06:00
e00aad84af
Add M240 parameters D I J R S
2019-02-14 20:00:40 -06:00
31c240a8db
Enhancements to G425 ( #13159 )
...
- Turn off bed leveling prior to calibrating.
- This prevents lateral probes from having a Z component that
triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
- Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
- Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
- Not necessary to disable global endstops
2019-02-14 16:45:31 -06:00
84fc400aba
Update BIQU SKR V1.1 pins, add TMC2130 settings ( #13166 )
...
* Remove untested displays add TMC2130 configs.
* Remove references to the ReARM, delete untested displays. Add TMC2130 settings. Cleanup spacing, etc.
2019-02-14 16:43:56 -06:00
ab2816c870
Patch for M240
2019-02-14 15:13:57 -06:00
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
be9a409980
Fix M125 XY parameters, export get_homing_bump_feedrate
2019-02-14 05:25:46 -06:00
ce40c2e87c
Use do_blocking_move_to(ref, fr)
2019-02-14 02:22:08 -06:00
bdc2f10b90
Update Italian language, fix unused var warning ( #13164 )
2019-02-13 21:05:18 -06:00
9f0e1834ec
Followup to #13039 ( #13163 )
...
- Fix compile error when accessing `process_subcommands_now_P`.
- Use `const` var eliminating double-negative (to make code more understandable).
2019-02-13 20:39:38 -06:00
1ace97e946
[2.0.x] Update German language ( #13150 )
2019-02-13 20:31:50 -06:00
7cf9b93f26
Add HAS_FILAMENT_SENSOR ahead of 12962
2019-02-12 20:13:20 -06:00
2c8d12d3ec
Update Italian language ( #13148 )
2019-02-12 18:40:34 -06:00
c2b90c44e4
Prettify some code comments
2019-02-12 17:43:37 -06:00
a0dadc8c62
Smaller I2CPositionEncoder strings
2019-02-12 16:21:56 -06:00
18996d2595
Fix some spelling
2019-02-12 16:21:56 -06:00
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
