6ed02c86be
Fixed wrong code (will not even compile when EXTRUDERS>2)
2012-10-23 18:08:43 +02:00
2a67363e27
Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp
2012-10-22 11:05:17 +04:00
205304ddee
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
2012-10-22 10:59:27 +04:00
58bca87c72
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-21 14:40:06 +02:00
febeb43197
Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
...
This reverts commit cb02c2f9d8
2012-10-21 14:36:31 +02:00
8178dec4c3
Fix num of digits on LCD for E and Z axis.
...
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
2012-10-18 17:45:40 +04:00
70f57a6844
Merge pull request #273 from setar/Marlin_v1
...
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-17 04:10:18 -07:00
ff14199e58
Merge pull request #270 from jothan/Marlin_v1
...
Create an explicit rule for building applet/Marlin.cpp.
2012-10-17 04:09:36 -07:00
695938ba3f
Italian language support
2012-10-17 12:48:26 +02:00
cb02c2f9d8
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-17 10:49:05 +04:00
e4a5e333ef
Generalize.
2012-10-15 21:34:33 -04:00
e10d3136c8
Create an explicit rule for building applet/Marlin.cpp.
...
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.
This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
2012-10-15 21:16:25 -04:00
9f089756b7
Merge pull request #265 from setar/Marlin_v1
...
Added Russian translation
2012-10-14 14:11:58 -07:00
326423719f
Add support for Megatronics
2012-10-14 14:05:57 +03:00
d07b6e93d5
Add support for Megatronics
2012-10-14 14:05:12 +03:00
efcc28d347
Fix check for include LiquidCrystalRus.h
2012-10-13 00:29:34 +04:00
cfc193cdac
Enables support the Cyrillic alphabet for LCD
2012-10-12 19:06:43 +04:00
24bcc9647d
Added Russian translation
2012-10-12 18:33:05 +04:00
bf7e453d02
Unwanted artifacts from unclean merge of bed-pid tree
2012-10-09 14:47:35 -05:00
36a746d7d5
Merge pull request #244 from markfinn/pidbed
...
PID for heated bed
2012-10-08 11:15:16 -07:00
df09e2adce
Spanish updated
2012-09-26 19:14:07 +02:00
ddf6603d81
Spanish language updated. Bug fixes on dialogs.
2012-09-26 19:11:45 +02:00
4bf8b1aeee
fesfas
2012-09-26 19:05:31 +02:00
be1e099f1b
Union whit Erick version
2012-09-25 19:17:15 +02:00
7afd202b89
New dialogs translated to spanish. Bug fixes.
...
Dialogs from M119 translated, and "Set Preheat" dialogs adapted to the
screen size.
2012-09-25 19:16:57 +02:00
ebc4601185
Some new dialogs translated to Spanish
2012-09-25 19:08:44 +02:00
c8ea9b0e58
Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin
2012-09-25 18:51:20 +02:00
ca7ca4572e
primo commit
2012-09-25 18:46:38 +02:00
8016f058bc
fix max endstop pins
2012-09-19 13:15:17 -05:00
d197f8504b
clean up and changes from testing
2012-09-17 19:18:50 -05:00
eb06a886c4
missed
2012-09-17 14:23:49 -05:00
04631d2250
cleanup for pull
2012-09-17 14:17:24 -05:00
0a5ad3ab85
move comment to correct place
2012-09-17 08:42:35 -05:00
8ac5b29e02
Changes to M119 response for easier visual comparison
...
Changed to report on individual lines with "TRIGGERED" or "open" instead of "H" or "L" on one line as H&L could be confused with logic levels High and Low which may be wrong if using inverted logic. Added strings to language.h.
Fixed typo "deu" in English language that was fixed in #134 but got added back in via 9f7f7354f5
2012-09-16 14:51:24 -07:00
c6caa45ae2
Limit Switch locations based on MIN/MAX limits and homing direction
...
fixes #246
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
Relocated code based on feedback.
2012-09-15 15:25:49 -07:00
dc566d654f
fixes #246
...
Added statements to set the limit switch positions to the maximum travel if homing in the positive direction as well as bed center at (0,0) if defined.
2012-09-14 21:48:49 -07:00
ba898faa7d
Merge pull request #249 from gwelchc/patch-2
...
Slight modification for byte savings
2012-09-14 12:13:36 -07:00
0152ee71a5
Merge pull request #248 from gwelchc/patch-1
...
Binary representation for characters in ultraldc.pde
2012-09-14 12:10:28 -07:00
6ccbfeb80c
Update Marlin/Marlin.pde
...
Added function 'setTargetedHotend' that turns into a function an operation repeated 3 times through the M-codes processing.
This modification saves a few bytes that can be used to add support for new commands.
2012-09-14 16:38:54 +03:00
c433142abf
Update Marlin/ultralcd.pde
...
The joris' char drawins are expressed in binary so to show their content's in a more visual fashion.
This is not a code modification as much as a readibility modification.
2012-09-14 16:29:43 +03:00
1d389ad3a8
Fix M81 not working reliably on Gen7
...
Some discussion of the issue is here http://forums.reprap.org/read.php?181,118329,page=1
2012-09-13 19:23:48 +04:00
9698f4ea64
bed pid
...
Conflicts:
Marlin/Configuration.h
2012-09-12 21:18:59 -05:00
e5c39b7c2a
commit
2012-09-10 14:25:49 +02:00
e8c92e0a95
Missing #else in temperature.cpp prevented reading bed temp when TEMP_BED_PIN <7. Thanks to Leland Wallace for helping me track this down via "Sesame Street" coding (what is not like the other)
2012-09-09 16:06:02 -07:00
bf2071871c
Merge branch 'Marlin_v1' of https://github.com/Drakelive/Marlin
2012-09-08 23:08:34 +02:00
fc32e20881
first commit
2012-09-08 22:26:23 +02:00
abf0693e8e
Added KILL_PIN -1 to gen7 boards
2012-09-04 08:20:27 +02:00
47319cf64e
Fixed typo in SF arc fix code.
2012-09-03 21:28:31 +02:00
e358a2d7af
Added fix for SF Arc Point fillet procedure
2012-09-02 01:12:49 +02:00
044a64a1fb
Merge pull request #225 from Justblair/Marlin_v1
...
Added PDF file containing Menu Tree for documentation purposes.
2012-09-01 04:41:49 -07:00
