bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,118 Commits 1 Branch 4 Tags 151 MiB
ee243e4edf
Commit Graph

12118 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Tobias Frost
60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
Scott Lahteine
c7d618b4d9 Fix SERIAL_ECHOLNPAIR 
Fix #13333
 2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
Msq001
fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
Tobias Frost
afbec5ff7e Have ExtUI::getProgress use ui.get_progress (#13328) 2019-03-07 18:00:38 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Chris Pepper
8d95019442
LPC176x NeoPixel Support (#13322) 2019-03-06 23:54:19 +00:00
Scott Lahteine
893ee68b52 Clean up trailing whitespace 2019-03-06 01:02:43 -06:00
Scott Lahteine
39f1222060 One fewer G29 error string 2019-03-05 23:04:52 -06:00
InsanityAutomation
543fc4c117 Mention 2.0.x 8-bit support earlier in README (#13317) 2019-03-05 23:03:00 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items (#13294) 2019-03-05 06:46:06 -06:00
Tobias Frost
56fdcf93d1 Disallow SD_DETECT_INVERTED with FYSETC F6. (#13307) 2019-03-05 06:45:28 -06:00
Tobias Frost
7ce13a6ec1 Fix a print_job_timer compile error (#13304) 2019-03-05 06:39:15 -06:00
Tobias Frost
6df51201ae Include EXTENSIBLE_UI in single LCD sanity check (#13306) 2019-03-05 06:33:36 -06:00
Scott Lahteine
2e5a3b01fd Save Power Loss Recovery only on move commands 2019-03-05 02:43:29 -06:00
Scott Lahteine
15738ea506 Update a motion comment 2019-03-05 00:50:29 -06:00
Scott Lahteine
bc87e97357 Prevent a tool change move out of bounds 2019-03-05 00:50:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 2019-03-04 16:44:54 +00:00
Chris Pepper
38bef9da91 Report auto temp to both serial ports, if available (#13301) 2019-03-03 21:03:48 -06:00
Robert Mendon
367d392880 Init stepper current after stepper pins are set up (#13302) 2019-03-03 20:58:02 -06:00
InsanityAutomation
bf8b38e0f7 Relocate configs above Marlin/src folder (#13299) 2019-03-03 16:50:56 -06:00
Scott Lahteine
d71dc5cf42 Fix for Ender 4 fan/case light pin 
See #12731
 2019-03-03 07:43:27 -06:00
Anthony Rich
7640b328df Support for Tronxy X5S 2e (#13297) 2019-03-03 07:41:05 -06:00
Scott Lahteine
599cdc3f0f Remove dead code from get_pid_output 
See #12981
 2019-03-03 05:45:20 -06:00
Scott Lahteine
35ae5daf2d Split up sdcard G-codes 2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512 Clean up some pre-serial-redirect includes 2019-03-03 01:52:15 -06:00
Scott Lahteine
fa0d909dd3 Add FIL_RUNOUT_PIN for BIGTREE_SKR_V1.3 
See #13267
 2019-03-03 00:27:47 -06:00
Ludy
bd4160dbaf Unused CS_ACTUAL_sb (#13282) 2019-03-02 17:30:30 -06:00
Vasily Evseenko
71773b128d Fix stepper use before init. Add Ultimaker2+ Extended clone config (#13284) 2019-03-02 17:29:02 -06:00
Scott Lahteine
edc4e037c4 Add a note to G10 2019-03-02 17:19:36 -06:00
Tobias Frost
57afd0ab37 Fix range check bug in FileList::seek() (#13286) 
When `count()` returns 0, `pos > (count()-1)` will always yield `true` due to integer underflow.
 2019-03-02 16:43:08 -06:00
kAdonis
05c2f80826 Fix bug in wait-for-heatup (#13290) 2019-03-02 16:29:10 -06:00
Chris Pepper
b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine
2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Scott Lahteine
9a6b90f47d TMC2660.h comment tweaks 2019-03-01 00:25:22 -06:00
Scott Lahteine
a2e3226597 Init XYZ to configured home position 2019-02-28 22:10:26 -06:00
Scott Lahteine
4fbbce9a35 Marlin Dev Mode for DOGM status screen 2019-02-28 22:10:26 -06:00
Scott Lahteine
998ce55be0 Alternative fan bitmap 2019-02-28 22:08:20 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Msq001
5b7ad3a5a0 Fix SKR onboard TF card CS pin (#13272) 2019-02-28 19:41:19 -06:00
Scott Lahteine
7fde3ed915 Skip hysteresis check when temp is already close to target 
To eliminate a long delay during pause, park, and filament change
 2019-02-28 14:35:19 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error 2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00