08356361ac
Fixing a problem with heated beds not working without PID and BED_LIMIT_SWITCHING
2012-12-13 10:25:29 +01:00
047d037f8c
#ifdef fix for #326
2012-12-13 09:04:41 +01:00
0908458381
Use gcc "-fwhole-program" optimization.
...
Use "whole program" and "link time optimization" features of gcc. The
whole-program optimization enables the compiler to evaluate the entire
firmware for optimization instead of just one code file at a time.
This leads to better overall optimizations.
2012-12-12 23:22:35 -05:00
16fbb455ef
Use linker "--relax" option.
...
The "relax" option enables the linker to convert certain "call"
instructions to the smaller "rcall" instruction. This reduces the
size of the resulting binary.
2012-12-12 23:22:31 -05:00
f30b46b2a8
One more fix for #338 , I really should get a heated bed to test with.
2012-12-12 23:06:17 +01:00
65c3f1ffcd
Most likely fixing #338
2012-12-12 21:56:17 +01:00
7577717b59
Fixed #336
2012-12-12 13:08:26 +01:00
1a8f54cea1
The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.
2012-12-12 11:47:03 +01:00
6731c094ee
Fix compiling with just an 16x2 LCD and no buttons.
2012-12-12 11:32:33 +01:00
b99a928a80
Fix the M117 (display message on LCD) when used over USB with checksums.
2012-12-12 09:35:32 +01:00
55ba90ac19
Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.
2012-12-12 09:08:37 +01:00
5ff5cee8ce
Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition)
2012-12-11 14:53:53 +01:00
8b58edc70e
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-11 13:38:34 +01:00
d0319d45af
Merge pull request #335 from jcrocholl/Marlin_v1
...
Fix endstop pins for Printrboard
2012-12-11 02:59:58 -08:00
ca409e5531
Fix X/Y/Z_MIN_PIN for Printrboard.
2012-12-11 01:59:48 -08:00
1f45cb0a51
Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.
2012-12-11 01:54:40 -08:00
931a0052ea
Fix typo in MANUAL_HOME_POSITION (plural S missing) and reduce BLOCK_BUFFER_SIZE because 64 wasn't working for some reason.
2012-12-11 01:22:04 -08:00
46ec4b648c
Added some missing Mxxx comments to M commands. Fixed the unsetting of the timer dividers for the fast PWM fan.
2012-12-11 10:21:44 +01:00
724f5aa36b
Update on makefile for moved Arduino addons.
2012-12-10 12:06:30 +01:00
6d9dfa96c3
Move the Arduino related stuff out of the Marlin tree, as they are not directly related to Marlin functionality but addons for the Arduino IDE. Also split up the addons for pre 1.0.0 Arduino and post 1.0.0 Arduino.
2012-12-10 12:02:29 +01:00
3fb07d9b8d
Add MINTEMP/MAXTEMP error to LCD, and fix temperature bug with more then 1 extruder.
2012-12-10 10:48:46 +01:00
8e2519e88b
Add realtime delta geometry in Marlin_main.cpp.
2012-12-10 01:04:12 -08:00
cec7283b21
Enable QUICK_HOME for deltabot.
2012-12-10 00:43:47 -08:00
2292441f0c
Use X/Y/Z_MAX_PIN instead of X/Y/Z_MIN_PIN for top endstops on deltabot.
2012-12-10 00:43:14 -08:00
c430906d3b
Deltabot settings and configuration adjustments.
2012-12-10 00:10:56 -08:00
82c8724b33
Fix compile with PID_DEBUG
2012-12-09 23:50:12 +01:00
9b160972a1
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:46:42 +01:00
e036750bdf
Use the disable macros on initialization. Which fixes a bug when there is no pin defined for stepper enabled (motherboard 4)
2012-12-09 23:46:25 +01:00
fcd9de72ef
Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1
2012-12-09 23:31:07 +01:00
32d4373e0f
Add printrboard and brainwave to Makefile.
2012-12-09 23:30:55 +01:00
b3ddbcee2a
Merge pull request #329 from jcrocholl/Marlin_v1
...
Add Printrboard and Brainwave to pins.h and fastio.h
2012-12-09 14:29:26 -08:00
29435dfb4b
Proper avr for Sanguino in Makefile.
2012-12-09 23:02:03 +01:00
52158dffcc
Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.
2012-12-09 23:00:06 +01:00
ca7acbe6d9
Allow specification of which arduino hardware subvariant in Makefile.
2012-12-09 19:19:57 +01:00
33247733e0
Teensylu and Printrboard use different analog pins for thermistors.
2012-12-09 02:19:13 -08:00
621c24a10f
AT90USB is only defined after pins.h is included.
2012-12-09 01:40:33 -08:00
6cba11f087
Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.
2012-12-09 01:32:09 -08:00
4d351b4846
Improved formatting and comments for consistency.
2012-12-08 20:15:53 -08:00
a30007caa4
If fastio.h is not messed up then Teensylu and Printrboard are actually using the same pins.
2012-12-08 19:46:42 -08:00
6aa87a7b67
Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.
2012-12-08 15:16:38 -08:00
b1c38d4c82
Avoid compiler warnings (redefined MOTHERBOARD) in Arduino 1.0 and greater.
2012-12-08 11:34:18 -08:00
42e21bb06e
Add support for Printrboard (from https://github.com/lincomatic/Marlin ) and Brainwave (from https://github.com/metrix/Sprinter ).
2012-12-08 10:49:01 -08:00
ce4b5bbeaa
Add AT90USB646 support from Sprinter to fastio.h.
2012-12-08 10:45:58 -08:00
f413aa33b3
Small makefile change, posibility to add defines on the commandline, and fix compiling with watchdog enabled when using the Makefile.
2012-12-08 11:49:53 +01:00
587154c01b
Fix the WATCHPERIOD implementation. It did not work correctly in a multi extruder setup, it did not work after 32 seconds after startup (int16 used as millies timestamp). And it did not work if you gave an M104 or M109 when the target was already around the target setpoint. So on average, it did not work at all. The new implementation should be robust in detecting a failure to heat up.
2012-12-06 10:36:07 +01:00
1f27870d41
Fix compiling the watchdog error message when the manual reset watchdog is used.
2012-12-06 10:27:50 +01:00
c5d4225804
Mistake there, not sure why I did that. My bad.
2012-12-05 20:23:13 +01:00
529748894c
Minor changes in the temperature code for some cleanup.
2012-12-05 19:54:01 +01:00
4e26ecc940
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
2012-12-05 19:32:26 +01:00
c421774422
The Partial release message (which does not really tell you anything) overwrites the final print time on the LCD, which is a real shame. So I removed the message.
2012-12-05 19:32:02 +01:00
