Marlin_Firmware/Marlin
2012-12-12 09:35:32 +01:00
..
cardreader.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
cardreader.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
Configuration_adv.h Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments. 2012-12-11 01:54:40 -08:00
Configuration.h Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. 2012-12-12 09:08:37 +01:00
ConfigurationStore.cpp Fixed #317 2012-11-24 17:32:30 +01:00
ConfigurationStore.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
COPYING first commit 2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py Added 20MHz support. 2012-03-11 12:25:04 +01:00
createTemperatureLookupMarlin.py Added new temperature lookup table creation tool. This one uses stein hart-hart equations. 2012-11-16 23:51:05 +01:00
fastio.h Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7. 2012-12-08 15:16:38 -08:00
language.h Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 2012-12-11 14:53:53 +01:00
LCD Menu Tree.pdf Added PDF file containing Menu Tree for documentation purposes. Source xlsx document included. 2012-08-29 21:08:41 +01:00
LiquidCrystalRus.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
LiquidCrystalRus.h Enables support the Cyrillic alphabet for LCD 2012-10-12 19:06:43 +04:00
Makefile Update on makefile for moved Arduino addons. 2012-12-10 12:06:30 +01:00
Marlin_main.cpp Fix the M117 (display message on LCD) when used over USB with checksums. 2012-12-12 09:35:32 +01:00
Marlin.h AT90USB is only defined after pins.h is included. 2012-12-09 01:40:33 -08:00
Marlin.pde Mistake there, not sure why I did that. My bad. 2012-12-05 20:23:13 +01:00
MarlinSerial.cpp Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
MarlinSerial.h Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well. 2012-12-09 01:32:09 -08:00
Menu Plans.xlsx Tidy up 2012-08-29 22:53:41 +01:00
motion_control.cpp software_endstops: use *_MIN_POS and *_MAX_POS for arcs 2012-08-10 19:36:30 +01:00
motion_control.h Removed interrupt nesting in the stepper ISR. 2011-11-27 21:12:55 +01:00
pins.h Fix the sensitive pin definitions, there where analogue numbers in the digital pin list. Also made M42 without a P function on the LED_PIN (which was otherwise a useless pin definition) 2012-12-11 14:53:53 +01:00
planner.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
planner.h Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 2012-05-09 08:05:13 +03:00
Sd2Card.cpp Fix for a few -Wextra warnings. 2012-11-12 15:35:28 +01:00
Sd2Card.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2PinMap.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdBaseFile.cpp Few simple fixes that save RAM, as static strings are stored in RAM by default. 2012-11-28 10:30:34 +01:00
SdBaseFile.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatConfig.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatStructs.h Added long filename support. 2012-08-22 14:49:57 +02:00
SdFatUtil.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdFatUtil.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.cpp First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
SdFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdInfo.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
speed_lookuptable.h Made the 2nd speed lookup table condition more explicit. 2012-11-11 12:02:48 +01:00
stepper.cpp Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-12-09 23:46:42 +01:00
stepper.h Few simple fixes that save RAM, as static strings are stored in RAM by default. 2012-11-28 10:30:34 +01:00
temperature.cpp Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target. 2012-12-12 09:08:37 +01:00
temperature.h Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 23:00:06 +01:00
thermistortables.h Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same. 2012-12-09 23:00:06 +01:00
ultralcd.cpp Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
ultralcd.h Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup. 2012-12-03 12:52:00 +01:00
watchdog.cpp Fix compiling the watchdog error message when the manual reset watchdog is used. 2012-12-06 10:27:50 +01:00
watchdog.h First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions. 2012-11-06 12:06:41 +01:00
wiring.h add wiring.h, that can be used to overwrite: 2011-12-22 14:57:28 +01:00