bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,576 Commits 1 Branch 4 Tags 151 MiB
e96468566d
Commit Graph

10693 Commits

Author SHA1 Message Date
Andy Shaw
064177154c Update SD card connection / sharing options (#14325) 2019-06-26 03:55:57 -05:00
BigIronGuru
9f136a7c67 Low-priority homing in G34 (#14391) 2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5 Shorthand for home-after-deactivate 2019-06-26 03:47:55 -05:00
J.C. Nelson
30a3db4f22 Fix Malyan M200 config and protocol (#14394) 2019-06-26 03:35:52 -05:00
oechslein
8c55bd5451 Update "StallGuard threshold" heading (#14395) 2019-06-26 03:33:07 -05:00
Scott Lahteine
98f3a3d5c3 Bump distribution date 2019-06-26 03:15:31 -05:00
Msq001
e3846ec7a1 SKR mini can use 128x64 LCD (#14388) 2019-06-26 01:12:41 -05:00
Eric Ptak
8934b32f1b Fysetc AIO II / Cheetah STM32F1 (#14407) 2019-06-26 00:40:29 -05:00
Marcio Teixeira
8e23e9b16c Fix FIX_MOUNTED_PROBE compile error (#14393) 2019-06-25 04:55:29 -05:00
Tanguy Pruvot
07dac315a9 Up-to-date STM32F1 README (#14386) 2019-06-24 03:44:26 -05:00
thisiskeithb
a4aa3621c0 MKS Robin Mini Board Support (#14366) 2019-06-24 03:42:22 -05:00
Scott Lahteine
cf762d2c73 Fix enqueueing bug 2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f Update G34 for non-BLTouch probes (#14380) 2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36 Fix G28 with non-BLTouch probes (#14381) 2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
Scott Lahteine
3d9d72e8db Include order, spacing, etc. 2019-06-23 04:02:52 -05:00
mikeshub
1b1a4677f5 Fix LCD.h compilation error (#14377) 2019-06-22 21:08:30 -05:00
sjasonsmith
07b41a8c3f Include SOLENOID_PROBE in leveling report (#14344) 2019-06-22 17:54:37 -05:00
thisiskeithb
71b2700c3c Anycubic Trigorilla 1.4 Rev. 1.1 (#14357) 2019-06-22 17:53:45 -05:00
BigIronGuru
f5afaaef5b Fix probe.cpp warning (#14367) 2019-06-22 17:27:33 -05:00
BigIronGuru
def4bb987d Reset, stow BLTouch before mode change (#14368) 2019-06-22 17:26:02 -05:00
Scott Lahteine
78557076ff Add planner.synchronize to UBL G29 2019-06-22 17:23:29 -05:00
BigIronGuru
6578aa4e1b Apply minimum timing to BLTouch commands (#14369) 2019-06-22 17:20:19 -05:00
teemuatlut
2247bf1ba5 Add missing dedge init for TMC2209 (#14370) 2019-06-22 17:00:15 -05:00
mikeshub
1db7013e3b Fix and improve PID loops (#14373) 
- Windup guarding was missing. The kludge in place of windup guard is removed. D term filter calculations are simplified to require fewer `float` calculations. Sign change for D term output to make debugging output clearer.
- Use "no overshoot" for bed PID tuning.
 2019-06-22 16:52:56 -05:00
Scott Lahteine
17778d1c2a Fix M916-918 subcommands 2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32 Fix PLR/M43 warnings (#14333) 2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40 Only home Z at the end of G34 (#14353) 2019-06-22 00:43:33 -05:00
InsanityAutomation
5df051fdee Fix Start SD Print bug (#14354) 
Followup to the G-code parser injection update.
 2019-06-22 00:37:21 -05:00
LinFor
0f6f5132c1 Fix variable conflict in ok_to_send (#14351) 2019-06-21 19:04:30 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
BigIronGuru
8f99d45045 Fix BLTOUCH deploy/stow in HS mode (#14352) 2019-06-21 18:55:27 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
bb0bcbaec0 Suppress compiler warning 2019-06-21 02:20:40 -05:00
Tanguy Pruvot
52383633e7 STM32F1: M43 PINS_DEBUGGING (#14072) 2019-06-21 01:20:17 -05:00
Karl Andersson
81d550754a Fix "UNUSED" redefined warning on HAL_STM32 (#14342) 2019-06-21 00:48:10 -05:00
Karl Andersson
4b365552db Fix Marduino SBI/CBI redefine (#14341) 2019-06-21 00:46:23 -05:00
InsanityAutomation
a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Marcio Teixeira
49ea1c635a Fix missing dependencies (#14339) 2019-06-20 16:37:20 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
dd06017f64 Bring configs up to date 2019-06-19 01:03:51 -05:00
Scott Lahteine
9131b11944 Games in Info menu, if enabled 2019-06-19 00:03:32 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
Tanguy Pruvot
75aeb41ab7 SKRmini support for Fysetc Mini Panel (#14319) 2019-06-18 19:34:16 -05:00
InsanityAutomation
bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
Tanguy Pruvot
391250b04f STM32F1: Don't toggle EEPROM SPI SS (#14299) 2019-06-18 06:48:20 -05:00
Giuliano Zaro
27d30c1be8 Update Italian language (#14302) 2019-06-18 06:45:34 -05:00
Scott Lahteine
3f6424076b Update M524 description 2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b Document G-code M290 2019-06-18 04:53:31 -05:00
Scott Lahteine
c12b6ba760 Add Dagoma F5 to Makefile 2019-06-18 04:40:00 -05:00
3DSmitty
5b13abcacb Fix SPI_SD Outside of HAL_STM32F1 (#14306) 2019-06-18 02:38:18 -05:00
Bob Kuhn
089d12df16 Fix duplicate board IDs (#14310) 2019-06-18 02:26:13 -05:00
Ludy
2290b269dc Unused variable (#14301) 2019-06-18 00:15:41 -05:00
Scott Lahteine
6b2d42434c Wrap main menu external declarations 2019-06-17 21:44:56 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Scott Lahteine
651f3eeed0 Clean up trailing whitespace 2019-06-17 20:22:07 -05:00
Ludy
35aabd1834 Fix Spindle/Laser compile error (#14312) 2019-06-17 18:38:43 -05:00
Scott Lahteine
21f377d94a
STM32F1: various small changes (#14313) 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 17:48:50 -05:00
sensei73
ce5f94c8f4 Fix Touch-MI sanity checks (#14316) 2019-06-17 17:46:14 -05:00
Tanguy Pruvot
287df7a61f STM32F1: various small changes 
- init the led pin as output (like other HALs)
- reduce sdio dma priority to normal.. highest is never the best...
- allow fsmc only on compatible STM32F1 (like HAL fsmc)
- fsmc: remove an useless C style cast
 2019-06-17 10:27:30 +02:00
3DSmitty
66d51272af Fix SPI, SD for BIGTREETECH SKR Mini (#14287) 2019-06-15 18:12:05 -05:00
Scott Lahteine
903863dcb6 Suppress some warnings 2019-06-15 17:47:59 -05:00
Scott Lahteine
eb1c9113c2 Try to init SD with no detect pin 2019-06-15 15:36:48 -05:00
Scott Lahteine
9a56a88200 Use OUT_WRITE in SPI pin init 2019-06-15 15:36:43 -05:00
Scott Lahteine
24c23b60fa Use lambda, fix wrap pointer 2019-06-15 15:36:42 -05:00
pinchies
3021097888 Add JGAurora A5S and A1 (STM32F103ZET6) (#14291) 
- Now compiles and works correctly with changes to HAL timers and watchdog.
- Does NOT include awesome work on touch screen function.
- Does have working LCD and SD-based EEPROM.
 2019-06-15 14:28:22 -05:00
Ludy
6fb3db1633 Update German language (#14294) 2019-06-15 14:26:14 -05:00
Scott Lahteine
a17f057daa
Fix word wrapping on select screens 2019-06-15 14:06:23 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101) 
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
 2019-06-14 22:19:48 -05:00
Scott Lahteine
26de051e92 HAL SPI pin init cleanup 2019-06-14 20:17:25 -05:00
Scott Lahteine
50c9b33ed7 !ENABLED => DISABLED 2019-06-14 00:44:49 -05:00
teemuatlut
29afd11cbf Updates for TMC2660 init (#14245) 2019-06-13 23:16:10 -05:00
Scott Lahteine
dfdbd1e75f Use TEST macro where possible 2019-06-13 20:59:12 -05:00
teemuatlut
12a270fd29 Fix TMC5160 and TMC2160 PWMCONF init 2019-06-13 20:57:12 -05:00
Scott Lahteine
fc73a8b004 Add AXIS_HAS_SQUARE_WAVE shorthand 2019-06-13 20:57:12 -05:00
mb300sd
bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Aliaksei Kvitsinski
648a91bce8 Support for Z-Bold board (#14024) 2019-06-13 03:21:18 -05:00
MastS
18904c42f6 Fysetc LCD backlight timeout (#14265) 2019-06-12 21:59:39 -05:00
Scott Lahteine
bc2ff9b41f Fix M605 bugs 
Fixes #14191
 2019-06-12 20:01:08 -05:00
Scott Lahteine
f7792c0192 Group manual move options 2019-06-12 19:49:18 -05:00
Tanguy Pruvot
7d1eafc80a STM32F1: C++14 for static_assert, etc. (#14278) 2019-06-12 18:44:32 -05:00
Msq001
26e7e33698 Fix bug in STM32F1 WRITE macro (#14275) 2019-06-12 06:30:24 -05:00
Scott Lahteine
04715e04ee Minor M100 cleanup 2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc Move crc16 function to libs 2019-06-12 06:14:39 -05:00
Scott Lahteine
2a96d4e23a Move number-to-string functions to libs 2019-06-11 07:51:47 -05:00
Scott Lahteine
1ef95013f0 Update Marlin.cpp includes, defines 2019-06-11 07:30:51 -05:00
Kaushik Vemparala
c88d9ae282 Option to leave heaters set on SD abort (#14251) 2019-06-10 23:57:55 -05:00
Tanguy Pruvot
8cf5504a34 Redundant but faster recovery.enabled test (#14175) 2019-06-10 23:33:35 -05:00
Tanguy Pruvot
c3e5225531 Add SPI EEPROM to STM32F1 (#14239) 2019-06-10 23:30:23 -05:00
felixstorm
9439fab7fd Fix ESP32 servos, platformio.ini, etc. (#14247) 2019-06-10 23:22:19 -05:00
yangwenxiong
b0a4ea79b8 BigTreeTech SKR Mini v1.1 (#14041) 2019-06-10 21:10:51 -05:00
Robby Candra
f30b89953d runout.distance_mm LCD edit item (#14066) 2019-06-10 20:18:06 -05:00
mikeshub
a3f034b95e FFCP updates. Update XY soft endstops on tool_change (#14125) 2019-06-10 18:01:42 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131) 
Plus other BLTouch and menu enhancements.
 2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
thisiskeithb
662e7da8a4 Fix USE_BIG_EDIT_FONT bug (#14252) 2019-06-09 19:37:14 -05:00
teemuatlut
cccc51ee0e TMC Square Wave Stepping mode (#14195) 2019-06-09 05:08:05 -05:00
Scott Lahteine
80ce0d2bdb Whitespace cleanup 2019-06-08 06:40:44 -05:00
Scott Lahteine
455f0de817 Undefine sanity check tests when done 2019-06-08 06:29:28 -05:00
Robby Candra
7e07a3888b Fix PLR Z bug affecting Cartesians (#14230) 2019-06-08 05:27:58 -05:00
Robby Candra
5ca8d51e12 Ability to insert G-code in front of queue (#14229) 2019-06-08 05:23:53 -05:00
BigIronGuru
293018f76c Apply needed BLTouch patch (#14233) 2019-06-07 21:43:20 -05:00
Scott Lahteine
ffb76b75d7
fix TMC2208 boot loop with SW UART (#14135) 
Need stepper .begin() before calling susbequent .push()
 2019-06-07 07:27:10 -05:00
InsanityAutomation
4138b1f9ae Option to disable Case Light brightness control (#14165) 2019-06-07 07:23:42 -05:00
Tanguy Pruvot
764f0d9c1c STM32F1: Servo "soft" PWM via timer interrupt (#14187) 2019-06-07 07:11:48 -05:00
InsanityAutomation
66e22d9f5a ExtUI Heated Chamber support (#14198) 2019-06-07 07:08:41 -05:00
Scott Lahteine
9206c0e869 Use limit switch overrides 2019-06-05 22:27:06 -05:00
Scott Lahteine
34d2801bbe Rename pins file (2) 2019-06-05 21:41:58 -05:00
Scott Lahteine
fa3b5fb059 Uppercase pins filename 2019-06-05 21:41:58 -05:00
Scott Lahteine
858b2fa21a Fix thermistor table 2019-06-05 21:39:39 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
bbcb61e042 Initial Commit - Add board 2019-06-03 23:49:19 -04:00
Tanguy Pruvot
e4260a41cb Fix a DEBUG_LEVELING_FEATURE string copy (#14200) 2019-05-31 18:52:11 -05:00
Ryan
9d9030a39c Fix Archim1 SD card (#14184) 2019-05-30 19:58:38 -05:00
InsanityAutomation
123e58d9c3 Heated Chamber for Graphical LCD (#14190) 2019-05-30 18:31:50 -05:00
Scott Lahteine
93ab16c6e4 Remove old mixing ISR comment 2019-05-30 17:05:16 -05:00
Scott Lahteine
6572848d7f Fix stepper timing bug 2019-05-30 16:58:53 -05:00
Bob Kuhn
688b54d66a DUE USB composite device field corrections (#14185) 2019-05-30 16:26:48 -05:00
InsanityAutomation
f889cc6ea6 ExtUI parity with SPI LCDs (#14172) 2019-05-30 16:24:13 -05:00
Scott Lahteine
07021c85c8 Tweak timer16_Sequence_t 2019-05-30 16:09:37 -05:00
Roman Moravčík
d70929f7c0 Update Slovak language (#14179) 2019-05-30 15:57:14 -05:00
Tanguy Pruvot
e3a468f2cd STM32F1: FSMC only on chips with 100/144 pins (#14180) 2019-05-30 15:51:02 -05:00
Ludy
8e8e48f900 Fix links in templates, gcode.h (#14160) 2019-05-28 21:39:55 -05:00
InsanityAutomation
34ae76025e Clear Pausing message after M600 park (#14171) 2019-05-28 21:36:14 -05:00
Ludy
bd494a6bd6 Update defines for patched temperature macros (#14161) 2019-05-28 17:43:31 -05:00
doggyfan
e09d8811c1 Apply grace period to thermistor failure testing (#14167) 2019-05-28 15:36:03 -05:00
InsanityAutomation
0f04ba016f Adjust tool offset menus (#14153) 2019-05-27 21:29:08 -05:00
teemuatlut
bf4a0db97f TMC LCD followup (#14134) 2019-05-27 21:24:20 -05:00
Minims
32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
Robby Candra
5515f88452 Clarify SD longname string size (#14148) 2019-05-27 19:50:48 -05:00
Tanguy Pruvot
5f42d3a8b4 BLTouch French updates (#14137) 2019-05-27 01:02:35 -05:00
Scott Lahteine
d3bb5b69ba Apply NOLESS/NOMORE 2019-05-26 20:55:00 -05:00
Scott Lahteine
b315157053 Apply const to mcp4728 2019-05-26 20:54:24 -05:00
Scott Lahteine
3c179bbd47 Simpler G28 home axis conditions 2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b Reduce some M43 strings 2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5 Remove extra gcode. prefix 2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de Fix some whitespace 2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090 Always change to Tool 0 on G29 (#14146) 2019-05-26 14:53:21 -05:00
Giuliano Zaro
7b838f31be DUE HAL cleanup (#14126) 2019-05-26 14:51:32 -05:00
Chris
36a0376c36
fix TMC2208 boot loop with SW UART 
Need stepper .begin() before calling susbequent .push()
 2019-05-26 13:07:12 +02:00
Robby Candra
df7733425c Shorten pause message for 4 line LCD (#14097) 2019-05-26 02:33:52 -05:00
Scott Lahteine
605ec0a478 Fix thermistor table warning 2019-05-26 01:30:20 -05:00
doggyfan
90121047d9 Fix thermal protection with user thermistor (#14130) 2019-05-25 23:37:08 -05:00
Scott Lahteine
81cee05476 Update some env in pins.h 2019-05-25 23:17:50 -05:00
Scott Lahteine
47fd74a98d Clean up fast_pwm.cpp 2019-05-25 23:05:01 -05:00
Scott Lahteine
49229d97db Consistent _useTimerX tests 2019-05-25 23:05:01 -05:00
Scott Lahteine
8924389dfc Tweak servo µs macros 2019-05-25 22:33:51 -05:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Scott Lahteine
f8bede6b5e Fix some HAL includes 2019-05-25 19:20:17 -05:00
Bryan
0ef5d667b6 Fixed M43 parameter bug (#14099) 2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b TMC updates, capture LCD changes (#14074) 2019-05-25 18:22:12 -05:00
felixstorm
74f44783ac ESP32 servo support (#14109) 2019-05-25 18:12:24 -05:00
felixstorm
bc5a1fe562 Various fixes for ESP32 (#14102) 2019-05-25 17:06:00 -05:00
Giuliano Zaro
e1bf34bdc9 Ruramps4d typo fix (#14096) 2019-05-25 16:41:08 -05:00
Scott Lahteine
7cce6b8d68 Bring configs up to date (MANUAL_FEEDRATE) 2019-05-25 16:31:13 -05:00
Scott Lahteine
44caf70917 Improve editing, fix some small value editing 2019-05-25 15:29:00 -05:00
Scott Lahteine
612eaa87bd Fix "back" items in some sub-menus 2019-05-25 15:28:52 -05:00
Scott Lahteine
c5dc2e5a71 Update advanced BLTouch menu items 2019-05-25 15:26:25 -05:00
Scott Lahteine
48d1bd29cb Shift m before compare to 0 2019-05-25 15:22:15 -05:00
InsanityAutomation
9f69fbe5ee Move some menu items (#14118) 2019-05-25 15:16:00 -05:00
Scott Lahteine
fc52c43a26 Some documentation updates 2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245 Secure STM32F1 servo code and M280 detach (#14085) 2019-05-22 16:57:19 -05:00
Scott Lahteine
a49919396a LPC1768 MarlinServo => libServo 2019-05-22 16:54:52 -05:00
Scott Lahteine
2b5046659a Tweak Marlin headers, comments 2019-05-22 16:54:52 -05:00
Scott Lahteine
cc862a8213 Replace some functions with lambdas 2019-05-22 16:54:35 -05:00
Ludy
fafd73a3af Update copyright in headers (#14092) 2019-05-22 16:24:13 -05:00
Giuliano Zaro
2298923a9b Update Italian language (#14095) 2019-05-22 16:23:41 -05:00
Ludy
41f61a12b8 Update German language (#14093) 2019-05-22 16:23:16 -05:00
doggyfan
594f6b14be Limit user thermistor to 999, fix thermistor table macro (#14080) 2019-05-21 21:31:05 -05:00
Giuliano Zaro
a74aad3b4a Clean up HALs / FastIO (#14082) 2019-05-21 18:28:12 -05:00
Scott Lahteine
4ef364a073 Sanity check probe offsets must be integers 2019-05-21 17:16:21 -05:00
Scott Lahteine
cfca07852a Backlash linker error workaround 
Fix #14045
 2019-05-20 21:52:56 -05:00
Scott Lahteine
aeec9ef76b Update backlash code 2019-05-20 21:34:08 -05:00
Scott Lahteine
7b4c3bd92a Fix call to synchronize in lcd_pause_job 2019-05-19 15:51:45 -05:00
Scott Lahteine
9bf65eacaa Remove old adv config heading 2019-05-19 15:24:01 -05:00
Pavel4e5
3cd19a8ec0 Improve Zonestar keypad responsiveness (#14056) 2019-05-18 20:52:55 -05:00
Tanguy Pruvot
402f1f7307 STM32F1: STM32_HIGH_DENSITY is auto defined in HAL (#14057) 
- Fix the `fsmc` and `sdio` units which required hard defines for use.
 2019-05-18 20:45:22 -05:00
Tanguy Pruvot
87e7193259 Fix M226 sign warning (for most platforms) (#14049) 2019-05-18 16:15:48 -05:00
Tanguy Pruvot
256f810df2 Add open-drain output mode to STM32F1 FastIO (#14050) 
- This mode is often used/preferred to drive printer boards' MOSFETs.
- Can generally boost the allowed output power (for hotbed,nozzle and fans).
 2019-05-18 16:12:00 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
84ac5b360b Fix ExtUI mesh functions (#14027) 2019-05-17 20:37:23 -05:00
Scott Lahteine
9b5f9dda0e Update analog pins labels 2019-05-17 20:22:25 -05:00
FanDjango
85fb33a060 BLTOUCH tweaks, new v3.1 command (#14015) 2019-05-17 19:10:18 -05:00
GUEST.it
62ef54cb81 UBL: Log and display G29 progress (#14036) 2019-05-17 19:02:21 -05:00
GUEST.it
7907eec04c Fix power loss recovery with SINGLENOZZLE (#14033) 2019-05-17 18:47:15 -05:00
Scott Lahteine
efe651e749 Add THERMISTOR_NAME for 1000 2019-05-17 18:26:53 -05:00
Scott Lahteine
0b056970c6 Fix file.open in STM32 eeprom emu 2019-05-17 18:26:53 -05:00
InsanityAutomation
06f3273531 Fix DELTA pulse wait bug (#14028) 2019-05-17 16:16:56 -05:00
Marcio Teixeira
7ccbcf2eaa Fix TMC EEPROM regression (#14008) 
Partially undo 15357af to ensure TMC code is initialized in the proper order.
 2019-05-16 20:38:03 -05:00
Marcio Teixeira
9558962d59 Fix DUE HAL SW SPI compile error (#14005) 2019-05-16 20:36:19 -05:00
InsanityAutomation
07afe69cee Fix some bad AZTEEG_X5_MINI pins (#14011) 2019-05-16 20:33:00 -05:00
Chris Pepper
451ea996c9
[LPC176x] Fix switch fallthrough 2019-05-15 10:35:26 +01:00
Tanguy Pruvot
d7b0369e39 STM32: Fix SD EEPROM emulation conflict (#14012) 2019-05-15 02:42:10 -05:00
Scott Lahteine
785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Bob Kuhn
48bd8899bd Cohesion 3D Remix: Onboard SD card, Fysetc LCD (#13991) 2019-05-15 00:59:57 -05:00
FanDjango
dcaefc68a5 BLTouch.init should not deploy (#13988) 
Low or unknown probe clearance on init (even at powerup) is a risk and therefore, a deploy should be avoided because dragging the pin is possible: A deploy goes into alarm if it can't extend fully and then the subsequent stow will fail.
 2019-05-14 23:55:11 -05:00