bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
12,923 Commits 1 Branch 4 Tags 151 MiB
d068470e18
Commit Graph

719 Commits

Author SHA1 Message Date
Alexander Amelkin
e40636a7c1 Replace digitalPinHasPWM with HAS_TIMER (#13520) 2019-03-29 12:21:14 -05:00
Chris Pepper
ffc2c2d7c5 Move FAST_PWM_FAN code to HALs (#13491) 2019-03-26 01:03:23 -05:00
Bob Kuhn
6bd0a0be97 Relocate DUE Stepper ISR to TC0,2 (#13481) 2019-03-25 22:39:51 -05:00
pinchies
ef3b93daa1 Fix STM32F1 SD-based EEPROM emulation (#13475) 
If `openFile` is given `true`, then it has read-only access. Because all the writing occurs on the next line, this breaks SD card as EEPROM.
 2019-03-24 20:07:31 -05:00
Scott Lahteine
380c771988 Handle word-padded flash-based eeprom (STM32F1) 
Fix #13445
 2019-03-24 19:14:04 -05:00
Scott Alfter
32332bcd03 Proceed with Teensy 3.5/3.6 HAL (#13450) 2019-03-24 00:08:32 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Karl Andersson
5d3928cb01 PWM is not defined on Arduino Core STM32 (#13405) 2019-03-15 19:14:06 -05:00
Scott Lahteine
67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
6214c997c0 Remove includes of <binary.h> 2019-03-13 05:32:33 -05:00
Scott Lahteine
4555ae448f Fixups for ESP32 2019-03-13 05:32:33 -05:00
Hadrien Jouet
0278ad0a6d Add ESP32 WiFi interface (#11209) 2019-03-13 00:48:08 -05:00
Scott Lahteine
ad91476d26 Fix USEABLE_HARDWARE_PWM 2019-03-13 00:12:46 -05:00
Scott Lahteine
51ff5b68fa Clean up fastIO ahead of PWM patch 2019-03-12 20:39:55 -05:00
jmz52
013bb469ca Fix compilation for STM32F1 with no SDIO (#13366) 2019-03-11 16:40:51 -05:00
Scott Lahteine
aa1d587128 Some LCD code cleanup 2019-03-11 05:07:31 -05:00
Scott Lahteine
1f7e220387 Make HAL ISR macros function-like 2019-03-10 20:44:27 -05:00
Scott Lahteine
77b4176152 Use lib include for bit_constants.h 2019-03-10 19:09:28 -05:00
pinchies
4c43e6c48b Fix "spontaneous heating" issue (WRITE bug) on STM32 (#13356) 
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
 2019-03-10 17:25:54 -05:00
Msq001
fb3302feda Fix STM32F1 Serial and ADC pins (#13331) 2019-03-08 02:21:32 -06:00
Reece Kibble
dbead66988 Allows user to set (almost) any PWM frequency (#12638) 2019-03-08 02:15:42 -06:00
Scott Lahteine
44571775bd Further support for 6 extruders 2019-03-07 01:00:56 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper
b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine
fa236e9718 General cleanup ahead of L64XX 2019-03-01 19:58:07 -06:00
Scott Lahteine
9a6b90f47d TMC2660.h comment tweaks 2019-03-01 00:25:22 -06:00
Bob Kuhn
ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine
4200f9ed62 Hide freeMemory et.al. warnings 2019-02-26 18:03:00 -06:00
Scott Lahteine
dc88747770 Fix Due GET_ARRAY_IS_DIGITAL 
Co-Authored-By: bob-the-kuhn <bob.kuhn@att.net>
 2019-02-26 17:49:14 -06:00
Scott Lahteine
833c2e54a1 Add an empty flushTX to MarlinSerialUSB_Due 2019-02-25 13:48:14 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Karl Andersson
76e9ee33aa Fix include order to make SERIAL_PORT_2 work (#13241) 2019-02-23 16:56:09 -06:00
Scott Lahteine
15aa932aa6
HAL for Linux (#13146) 2019-02-22 19:09:10 -06:00
Scott Lahteine
a43e892fb5 Use 8-bit i2c address on LPC platform 
Fix #9799 — hopefully not a unicorn
 2019-02-20 06:27:26 -06:00
Scott Lahteine
631d867dc9 HAL cleanups 2019-02-20 06:27:26 -06:00
Scott Lahteine
758c6c9464 Very minor SPI speedup 2019-02-20 04:36:23 -06:00
Scott Lahteine
422dd6666e Fix Due EEPROM write bug 
See #13065
 2019-02-20 04:36:23 -06:00
Scott Lahteine
03e109c4a3 FLASH_EEPROM => FLASH_EEPROM_EMULATION 2019-02-20 04:36:23 -06:00
Scott Lahteine
50917ccda6 Tweak some u8g interface code 2019-02-20 04:26:34 -06:00
Scott Lahteine
3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
Scott Lahteine
18996d2595 Fix some spelling 2019-02-12 16:21:56 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Scott Lahteine
d9a3fea022 Comments in HAL_spi_STM32F1.cpp 2019-02-11 18:06:33 -06:00
Simon Jouet
5cd0fa3ce1 Basic GPIO expander using the ESP32 I2S peripheral (#12959) 2019-02-10 05:40:31 -06:00
Scott Lahteine
e1587da228
Clean up HAL_spi_Due.cpp (#13087) 2019-02-06 06:31:31 -06:00
Scott Lahteine
b96cc30cd0 HAL spacing tweak 2019-02-04 21:51:06 -06:00
Scott Lahteine
9e394139e5 Followup to 90911104 2019-02-04 10:46:52 -06:00
Andy Shaw
9091110460 LPC1768 - Don't change CS pin state (#13015) 2019-02-04 07:08:39 -06:00
Scott Lahteine
4fa1c52688 Tweak serial output code 2019-02-03 01:09:14 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Scott Lahteine
8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Scott Lahteine
00cdd41b5f Clean up for recent changes 2019-01-23 20:08:58 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine
48a581ba2e Tweak some HAL Due code 2019-01-23 00:53:20 -06:00
Scott Lahteine
0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
Scott Lahteine
a5911765c3 Tweak some spacing 2019-01-19 20:27:57 -06:00
Scott Lahteine
424aa05cc2 Fix some file endings 2019-01-19 18:19:12 -06:00
Scott Lahteine
ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
Karl Andersson
64a4649290 STM32 - Fix SD write (#12897) 2019-01-15 18:44:22 -06:00
Scott Lahteine
3e867008f0 Fix some HAL_STM32F1 type declarations 2019-01-12 16:21:11 -06:00
Nils Hasenbanck
f9299c4461 Make timer definition in pin files for STM32 possible (#12874) 
RemRam needs to redefine a particular timer to work correctly. The HAL did foresee this possibility and checks if the timer was already defined for either the stepper or temperature timer.

Prior to this commit the header file for the timers couldn't see those definitions in the pin file, but this commit will fix this.

Tested on an actual hardware to verify. (It wouldn't boot without it.)
 2019-01-12 14:40:49 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Chris Pepper
2919f3045d [LPC176x] Update PIO extrascript (#12878) 2019-01-11 19:45:33 -06:00
Scott Lahteine
0d30ccf767 Tweaks to TMC26XStepper 2019-01-11 19:42:34 -06:00
Karl Andersson
8ae6f1e556 Fix errors and some compiler warnings with HAL_STM32 PlatformIO build (#12869) 2019-01-10 19:01:31 -06:00
jmz52
d372e7e477 SDIO support for STM32F1 (#12782) 2019-01-04 13:38:07 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706) 
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
 2019-01-03 10:38:39 -06:00
jmz52
c4237b529f Fix MKS Mini and SD card conflct over SPI mode (#12783) 2019-01-03 10:27:53 -06:00
Phr3d13
01f75591c6 Fix GTM32_PRO_VB Serial and HAL via watchdog (#12753) 
Move `watchdog_reset` from `.h` to `.cpp` to eliminate the need to include `MarlinConfig.h` in a HAL-related file.
 2019-01-03 09:46:49 -06:00
Marcio Teixeira
60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00
Reece Kibble
7557f8d68c Rename all Stm32f1 to STM32F1 (#12639) 2018-12-31 16:36:49 -06:00
jmz52
33abb86b7e Add support for MKS Robin board (#12650) 
Implement initial support for MKS Robin (STM32F103ZET6) board.
Custom build script is used to generate encrypted firmware compatible with original MSK Robin bootloader (i.e. safe firmware update from SD card and possibility to go back to original close-source firmware).
 2018-12-20 17:23:27 -06:00
Scott Lahteine
f6321f878a
Simpler AVR + Trinamic + Soft Serial sanity-check (#12606) 2018-12-08 23:34:26 -06:00
mr-miky
11c7945365 Don't include STM32 Core code when compiling STM32 Generic (#12575) 2018-12-03 06:55:49 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Marcio Teixeira
7109dadd21 Additional pin definitions for Archim 2 (#12500) 
- Added GPIO pins to Archim 2
- Added new 108 pin to `fastio_Due.h`
 2018-11-22 01:07:02 -06:00
Andy Shaw
4975b13b74 Fix problems with LPC1768 EEPROM flash emulation (#12503) 
* Remove duplicate calls to PrepareSector

Some flash memory API calls require that a call to `PrepareSector` is done before use. However this call is already made by the LPC1768 framework so the calls in this code are not required.

* Ensure correct alignment of RAM buffer

The LPC176X flash API requires that the RAM buffer used for write operations must be word-aligned. This change ensures that this is the case.
 2018-11-22 01:03:32 -06:00
Ludy
90a58488b5 Corrected unused var, default switch, Travis tests (#12477) 2018-11-19 23:59:48 -06:00
Scott Lahteine
826d570162
Combine Travis CI option-setting commands (#12474) 2018-11-18 19:58:02 -06:00
Nils Hasenbanck
5a4fd8e0a6 Fix access to the DWT peripheral for STM32 HAL (#12434) 
Access to the DWT peripheral for the `CYCCNT` register needs to happen before `main()`. The code needs to be called after the setup of the system clocks, so the right place is between the `premain()` and `main()` function of the STM32 Arduino core.

This patch moves the DWT access code to a new function, which is then placed between `premain()` and `main()`.
 2018-11-18 01:30:46 -06:00
Ludy
22d7fed60a Fix compile error with SD_FIRMWARE_UPDATE (#12462) 2018-11-17 21:13:36 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Ryan
052d102ded UltiMachine Archim 1 support (#12404) 2018-11-14 00:27:39 -06:00
Scott Lahteine
0ee1a92971
Group status methods, share reset_status with Extensible UI (#12414) 
* Group status methods, share reset_status with Extensible UI
* Move common DOGM code to headers
 2018-11-13 01:47:45 -06:00
Scott Lahteine
4e0c935959 Update HAL and libs formatting 2018-11-10 19:43:23 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Scott Lahteine
c31e1735dd Restore LPC1768_PIN_INTERRUPT_M, apply to Z3 
- In reference to #12166
 2018-11-05 06:28:49 -06:00
Scott Lahteine
0c85869c26 Clean up file endings 2018-11-04 18:30:10 -06:00
Scott Lahteine
e0956bb572 Drop 'register' storage specifier 2018-11-04 16:17:13 -06:00
Scott Lahteine
9c0e05552e Suppress some compile warnings 2018-11-04 15:25:31 -06:00
Karl Andersson
176654791e Use board-specific or platform SPI pins in HAL_STM32 (#12323) 2018-11-04 15:03:45 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Nils Hasenbanck
cafabf2055 Implement DELAY_NS with CYCCNT on Cortex-M7 (#12283) 2018-11-01 16:11:51 -05:00
Karl Andersson
484ca68228 Fix misplaced parentheses (#12284) 2018-10-31 15:34:37 -05:00
Karl Andersson
1946f729fd STM32 FastIO using register access (#12276) 2018-10-30 19:25:44 -05:00
Scott Lahteine
4ed579cafc Americanized English spelling 2018-10-30 18:55:38 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
mholeys
63ce8baa55 Fix Teensy 3.5/3.6 ADC access for ADC1 (#12258) 2018-10-28 15:51:49 -05:00
Scott Lahteine
5580773191
Use FastIO, sanity-check LPC SD options, apply formatting (#12231) 2018-10-26 15:23:02 -05:00
Scott Lahteine
d015f746cc
Fix some compile warnings (#12220) 2018-10-26 03:53:06 -05:00
Scott Lahteine
fbfb48cce0 Indent a block 2018-10-25 10:52:27 -05:00
Scott Lahteine
7a04eb3a8b Fix some comment formatting 2018-10-23 22:35:44 -05:00
Karl Andersson
aa72884a6e Enable use of SERIAL_PORT_2 on HAL_STM32 (#12197) 2018-10-23 15:24:58 -05:00
Scott Lahteine
8d3a92fc4a Followup to millis_t patch 2018-10-20 23:23:58 -05:00
Ludy
44369d536a Use millis_t where needed (#12152) 2018-10-20 23:21:27 -05:00
Scott Lahteine
c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Marcio Teixeira
71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
Marcio Teixeira
5b7dd553d3 Fix sd_mmc_spi_mem capacity; clean up USB code (#12134) 
- Fix an error in the return value of `sd_mmc_spi_read_capacity` which was causing the host OS to read beyond the last sector in the card.
- Clean up the USB flashdrive code and add better debugging.
 2018-10-18 11:34:07 -05:00
Scott Lahteine
df768e7d8f Followup to #12129 2018-10-18 11:29:49 -05:00
Chris Pepper
3c13c9e3e9 [LPC176x] Fix USEABLE_HARDWARE_PWM macro, cleanup multiple LED support (#12129) 2018-10-18 11:26:50 -05:00
Nils Hasenbanck
9deb23aa47 Add missing SerialUSB definition for STM32 HAL (#12124) 2018-10-17 11:14:10 -05:00
Scott Lahteine
bc75eb2c64 Cleanup for HAL_spi_Due.cpp 2018-10-17 10:33:54 -05:00
Scott Lahteine
cce4931342 Clean up recent contribs 2018-10-16 06:45:44 -05:00
Karl Andersson
8b5e51c9aa STM32F4xx modifications for HAL_STM32 (#12080) 2018-10-16 06:42:41 -05:00
Christopher Pepper
e5b4bf22d4 Remove debug output from flash persistent store implementation 2018-10-14 18:43:48 +01:00
Christopher Pepper
254b68fe2c servo update 2018-10-14 18:43:48 +01:00
Andy Shaw
870bfd08f5 usb and sdcard sharing improvements 
* Add traceback after watchdog timeout

Add the cpability to perform a traceback following a watchdog timeout.

* Enhanced hardware SPI

Allow use of either SSP0 or SSP1.
Ensure that no data is left in I/O buffers after calls to enable sharing of SSP hardware.

* Make flash emulation of eeprom the default

Make use of flash for eeprom storage the default. This means that usage of eeprom will not cause USB drive mount/unmount operations.

* Allow sharing of SD card

SD card I/O operations from the USB stack take place in idle loop, rather than at interrupt time. Allowing sharing of the SPI bus.

New configuration options to allow usage of the SD card to be specified.

* Fix problem with hardware SPI pins
 2018-10-14 18:43:48 +01:00
Christopher Pepper
5ddf52d58e [HAL][LPC176x] Pull out framework into separate repository 
Framework and build platform now located at https://github.com/p3p/pio-framework-arduino-lpc176x and https://github.com/p3p/pio-nxplpc-arduino-lpc176x respectively

fix mkssbase leds

move hardware serial

remove hardware/software serial

Hardware Serial extraction

HardwareSerial ISRs

fix disabled serial2 causing Serial object to link

move usb devices out to framework

separate out adc/pwm peripheral function from hal.cpp

fix includes

remove unused pwm init

move adc

HAL header update

templated filtered adc

LPC1769 platform
 2018-10-14 18:43:48 +01:00
Scott Lahteine
0bd54392b7 Use uint8_t in EEPROM code 2018-10-09 19:00:01 -05:00
Marcio Teixeira
ec9aa4f468 [2.0.x] Miscellaneous fixes (#12039) 
* Allow override of soft SPI pins in `pins_*.h`
* Add default case to avoid compiler warning.
* Additional pin definitions for Archim 2.
* Einsy Retro has same timings as Einsy Rambo.
 2018-10-08 18:14:52 -05:00
Nils Hasenbanck
191df5e17d Correct PWM_PIN behavior for STM32 HALs (#12027) 2018-10-07 17:08:01 -05:00
Scott Lahteine
bfcf570d68 Try ISR_ALIASOF for Endstop Interrupts 2018-10-07 17:05:32 -05:00
Scott Lahteine
cb7844c8d4
Save PROGMEM on serial prefixes (#12033) 
With default config and `EEPROM_SETTINGS`, saves over 200 bytes of PROGMEM.
 2018-10-07 15:32:15 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Nils Hasenbanck
fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
AnoNymous
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Eduardo José Tagle
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Scott Lahteine
606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
Scott Lahteine
8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine
7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Marcio Teixeira
ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Sam Lane
d783400330 Updates to STM32F7 HAL, for completeness (#11770) 2018-09-09 03:26:15 -05:00
Alexander Amelkin
f417408df1 [STM32F1] Fix HAL for new PlatformIO (#11749) 2018-09-07 18:15:32 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
6a3207391f Remove obsolete HAL_timer_restrain 2018-08-31 16:17:22 -05:00
Ilya Bukhonin
7ecb8b4af5 [2.0.x] Teensy 3.1 and 3.2 support (#11460) 2018-08-27 21:49:49 -05:00
Scott Lahteine
a317bb4991 Remove stray tab 2018-08-24 17:35:13 -05:00
Scott Lahteine
ba1919c1eb HAL tweaks to LPC1768 main 2018-08-22 17:16:18 -05:00
Scott Lahteine
0987ed2a18 Use American English 2018-08-22 17:16:18 -05:00
jmz52
a77f8c6dd5 Implement servo support for STM32F1 (#11580) 
Implement servo support for STM32F1. Original code was incomplete and depended on Servo library from stm32duino which conflicts with `module/servo.h`.
 2018-08-20 21:13:51 -05:00
Dave Johnson
0456caf0ad Consolidate shared HALs and isolate HAL compile (#11552) 2018-08-20 21:11:12 -05:00
jmz52
dfe18ac633 Fix compilation error for STM32F1 with U8GLIB_SSD1306 or U8GLIB_SH1106 enabled (#11583) 
The `binary.h` file required by `lcd/dogm/dogm_bitmaps.h` is not present in stm32duino environment. Binary macros are defined in `bit_constants.h` in stm32duino framework.
 2018-08-20 20:37:56 -05:00
ghent360
00d24a8219 Don't call __delay_4cycles for 0 cycle delay - takes a really long time. (#11586) 2018-08-18 22:50:11 -05:00
jmz52
0b2d686160 Fix "SD init fail" problem for STM32F1 (#11579) 
Fix "SD init fail" problem for STM32F1 caused by incorrect SS pin state and incorrect SPI mode. Issue #11225
 2018-08-17 23:27:10 -05:00
Nils Hasenbanck
b37bfeffeb [2.0.x] Use the new const functions of the persistentStore api (#11544) 2018-08-14 18:35:36 -05:00
Chris Pepper
5573ef62c6 [2.0.x] PersistentStore update followup (#11549) 2018-08-14 17:54:12 -05:00
Scott Lahteine
834ea7fcea Remove 'const' from PersistentStore::capacity 2018-08-14 04:46:10 -05:00
Dave Johnson
c64199941e Compile only selected PIO environment (#11519) 2018-08-14 03:28:52 -05:00
Andy Shaw
5be2559eda Use flash memory to emulate EEPROM (#11500) 
Use a sector of the LPC flash memory to emulate EEPROM storage, removing the need to have an SD card to store system parameters.
 2018-08-14 01:19:34 -05:00
Scott Lahteine
865ee5985f Followup persistent store with heading, const 2018-08-13 23:55:33 -05:00
Scott Lahteine
6a8b906318 Followup for persistent_store_api.h 2018-08-13 17:43:35 -05:00
Chris Pepper
66d2b48b59 Update PersistentStore api (#11538) 
- Clean up the API to use a `static` class instance to adhere to Marlin convention
- Add `const` position data access for read/write
- Add Storage capacity to the interface
 2018-08-13 17:30:25 -05:00
Scott Lahteine
15d68cb496 Pre-override of ST7920 delays before HAL.h 2018-07-26 23:33:18 -05:00
Scott Lahteine
244b9a8257 Better fastio 1280/2560 pin list 
Co-Authored-By: bleughb <36889022+bleughb@users.noreply.github.com>
 2018-07-26 05:23:51 -05:00
Andy Shaw
624986d423 Ensure ADC conversion is complete before reading (#11336) 
The current Marlin implementation relies on a timer interrupt to start the ADC conversion and read it. However in some circumstances the interrupt can be delayed resulting in insufficient time being available for the ADC conversion. This results in a bad reading and false temperature fluctuations. These changes make sure that the conversion is complete (by checking the ADC hardware via the HAL) before reading a value.

See: https://github.com/MarlinFirmware/Marlin/issues/11323
 2018-07-26 03:59:19 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
64f007580b Fix some header comments 2018-07-17 19:50:24 -05:00
teemuatlut
f38c81cdde LPC176x: Expand HW SPI class 2018-07-14 19:06:27 +03:00
teemuatlut
3b5dec4b13 Add new LPC include folder 2018-07-14 18:58:56 +03:00
Scott Lahteine
d05e832f29 Add STM32F1 support for SD-based EEPROM 2018-07-06 23:45:47 -05:00
etagle
1367df2875 Replace double with float, optimize calculation 2018-07-04 22:28:56 -05:00
etagle
e7e896e7d7 More tweaks to fastio_Due.h 2018-07-04 17:57:47 -05:00
Chris Pepper
55f4744e54 [LPC176x] Endstop Interrupts Feature (#11202) 
Enable the endstop interrupts feature for LPC176x boards. Although Smoothieboard chose to use non-interrupt capable pins for their endstops, and this has been copied by clones, so they can't use it.
 2018-07-04 17:51:45 -05:00
Chris Pepper
5abf5bc8a7 [LPC176x] Fix Interrupt forward declarations (#11200) 2018-07-04 17:43:14 -05:00
Chris Pepper
5616581eb1 [LPC176x] Update fastio _GET_INPUT, _GET_OUTPUT macros (#11168) 2018-07-01 23:02:38 -05:00
Scott Lahteine
8a8eae8d97
Implement more fastio_Due macros (#11165) 2018-07-01 01:24:06 -05:00
Scott Lahteine
fc10101b06 Tweaks to fastio_Due.h 2018-06-30 00:15:50 -05:00
Alexander Amelkin
ffdbc1f42c STM32F1: Fix SD card persistent store API (#11090) 2018-06-26 14:41:23 -04:00
Scott Lahteine
d86f25ab63 Fix Serial ISR priority for LPC1768 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-06-25 12:15:41 -04:00
Scott Lahteine
99591dc20c
Filter endstops state at all times (#11066) 2018-06-21 20:14:16 -05:00
Chris Pepper
0312c42f9d [2.0.x] LPC176x Serial cleanup (#11032) 2018-06-16 20:59:22 -05:00
Scott Lahteine
c1269c2ec1 Tweak AVR critical section defines 2018-06-16 17:42:32 -05:00
Chris Pepper
f88adcbfd5 [2.0.x][LPC176x] Fix binary linking broken by pio update (#11026) 2018-06-15 15:32:51 -05:00
Simon Jouet
e2aeda61ed HAL for Espressif ESP32 Wifi 2018-06-13 19:33:35 -05:00
Scott Lahteine
19d4c7c1cd Tweak HAL header comments 2018-06-13 19:08:42 -05:00
etagle
a215725df6 Fix stepper pulse timing 
Always honor minimum period on stepper pulse generation, and fix timing calculations

Signed-off-by: etagle <ejtagle@hotmail.com>
 2018-06-12 21:34:24 -05:00
Scott Lahteine
a9861a780e Tweak HAL heading 2018-06-12 19:40:17 -05:00
Scott Lahteine
cf53e502a2 No need to set input after attachInterrupt 2018-06-12 18:43:11 -05:00
Karl Andersson
e0276d2f32 Official STMicroelectronics Arduino Core STM32F4 HAL compatibility (#11006) 2018-06-12 18:38:00 -05:00
Scott Lahteine
4dbec774b5 HAL_*_TIMER_RATE => *_TIMER_RATE 2018-06-12 16:39:12 -05:00
Scott Lahteine
9b945c13a1 Fix STM32F1 ISR_ENABLED 2018-06-11 22:09:45 -05:00
Alexey Shvetsov
2ddba201c0 STM32F1 HAL Fixes (#10999) 
- Enable / disable interrupts with `__iSeiRetVal` / `__iCliRetVal`
- Add STM32F1 to Travis CI tests
 2018-06-11 20:00:56 -05:00
Eduardo José Tagle
5590c8ffd0 Fix MarlinSerial (AVR) (#10991) 
An undocumented hw bug makes the UART lose chars when RX ISR is disabled, even for a very small amount of time. This happens when RX_BUFFER > 256, and the result is corrupted received commands. Solved by implementing pseudo-atomic operations on 16bit indices.
 2018-06-10 20:32:20 -05:00
Scott Lahteine
117fd007a9 Followup to pin error change 2018-06-10 19:28:45 -05:00
etagle
99af086cea Add hidden Serial overflow debug options 2018-06-10 04:25:42 -05:00
etagle
d90e8fcad9 Fix XON/XOFF implementation 
Pointed out by @GMagician
 2018-06-10 04:25:42 -05:00
Scott Lahteine
3701869e6c Add HAL_timer_start for AVR, use stepper timer to time pulses 2018-06-09 22:30:13 -05:00
Scott Lahteine
a426986df8
Ensure pins set to INPUT after attachInterrupt (#10928) 2018-06-06 20:59:08 -05:00
Giuliano
c9d1a620d4 [2.0.x] fix indentations (#10934) 2018-06-05 02:03:26 -05:00
Scott Lahteine
c685c7b7dd STM32F4: All pins can do PWM 2018-06-03 04:30:15 -05:00
Eduardo José Tagle
d3c02410a8 [2.0.x] Small assorted collection of fixes and improvements (#10911) 
* Misc fixes and improvements

- Get rid of most critical sections on the Serial port drivers for AVR and DUE. Proper usage of FIFOs should allow interrupts to stay enabled without harm to queuing and dequeuing.
  Also, with 8-bit indices (for AVR) and up to 32-bit indices (for ARM), there is no need to protect reads and writes to those indices.
- Simplify the XON/XOFF logic quite a bit. Much cleaner now (both for AVR and ARM)
- Prevent a race condition (edge case) that could happen when estimating the proper value for the stepper timer (by reading it) and writing the calculated value for the time to the next ISR by disabling interrupts in those critical and small sections of the code - The problem could lead to lost steps.
- Fix dual endstops not properly homing bug (maybe).

* Set position immediately when possible
 2018-06-01 19:02:22 -05:00
Chris Pepper
d87257f63c [2.0.x][LPC176x] Fix PIO build flags (#10909) 
Don't build and link with different flags, the binary may not work.
 2018-05-31 19:08:31 -05:00
Scott Lahteine
cbcb284f4a Allow libServo::attach to work on Teensy 3.5/3.6 2018-05-28 20:56:24 -05:00
Chris Pepper
f89f7c4a82 [2.0.x][LPC176x][Build] Force single precision constants, disable freestanding (#10892) 2018-05-28 19:38:22 -05:00
android444
16da5c62d0 Teensy 3.x fastio pullup (#10890) 2018-05-28 16:25:12 -05:00
Scott Lahteine
9b9b62b218 delay(SERVO_DELAY) => safe_delay(servo_delay[servo_index]) 2018-05-28 03:44:32 -05:00
android444
9c235ef821 [HAL]Add support for ST7920 - Teensy 3.x (#10872) 2018-05-27 03:36:57 -05:00
Bob-the-Kuhn
1c0ad8bbae wrong type of exit method 2018-05-26 08:17:03 -05:00
Eduardo José Tagle
6f330f397e [2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844) 2018-05-25 23:32:37 -05:00
Bob Kuhn
235facd545 install AVRDUDE 5.10, faster disk find for LPC1768 (#10849) 2018-05-25 20:26:48 -05:00
Bob Kuhn
e2db509d58 [2.0.x] Update/Fix LPC1768 extra script upload_extra_script.py (#10843) 
* Use a different method to find the volume info in Windows
 2018-05-25 04:31:18 -05:00
Scott Lahteine
5f8591528e Remove #pragmas that don't help c files 2018-05-23 23:47:16 -05:00
Scott Lahteine
c89649b46e Suppress U8glib build warnings 2018-05-23 02:47:36 -05:00
Scott Lahteine
4118199ddd Tweaks to core headers 2018-05-21 20:32:18 -05:00
Bob Kuhn
6dfbb39f83 [LPC1768] Add error-handling to upload script, update autobuild.py (#10802) 2018-05-20 21:22:04 -05:00
etagle
569df3fc0c Fix interrupt-based endstop detection 
- Also implemented real endstop reading on interrupt.
 2018-05-20 07:10:24 -05:00
etagle
0566badcef Add memory barrier, optimal interrupt on-off 
Disabling an ISR on ARM has 3 instructions of latency. A Memory barrier is REQUIRED to ensure proper and predictable disabling. Memory barriers are expensive, so avoid disabling if already disabled (See https://mcuoneclipse.com/2015/10/16/nvic-disabling-interrupts-on-arm-cortex-m-and-the-need-for-a-memory-barrier-instruction/)
 2018-05-20 02:39:34 -05:00
Scott Lahteine
c2fb2f54a1 Use assembly for AVR ISR vectors 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-20 01:58:51 -05:00
Scott Lahteine
206014a957 Fix LPC176x timer functions 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-20 01:58:51 -05:00
Scott Lahteine
59f7861bcb
Move backtrace to the HAL folder (#10790) 2018-05-20 01:33:21 -05:00
Scott Lahteine
c173a31060 Fix some compile warnings 2018-05-19 16:54:48 -05:00
Chris Pepper
9b64fdbc3a [LPC176x] HAL: Add missing program space definition (#10776) 2018-05-19 15:37:54 -05:00
Scott Lahteine
50270b53a0 Clear up some more compile warnings 2018-05-17 18:40:49 -05:00
etagle
40d7e12827 Removing warnings from compilation 2018-05-17 18:04:22 -05:00
Scott Lahteine
fb608938f8 Prevent compilation of unused u8g-oriented code 2018-05-14 13:31:04 -05:00
Scott Lahteine
37b15fe4cf Reorder HAL timer header items 2018-05-13 16:50:39 -05:00
Scott Lahteine
883b0c9880
Convert custom maths to inlines (#10728) 2018-05-13 08:10:08 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
etagle
9d98a62699 Followup to HAL optimizations and delays 
- Cleanups, fixes for Due HAL code.
- TC_IER is write-only. Use TC_IMR to test ISR state.
 2018-05-13 00:46:23 -05:00
Scott Lahteine
a1062eec5b
Better handling of DELAY_NS and DELAY_US (#10716) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 08:34:04 -05:00
etagle
1b225a2809 DUE: Emergency parser for the USB CDC 2018-05-12 02:12:11 -05:00
Scott Lahteine
0436e16fb2 Apply shorthand Assembler macros 2018-05-08 10:08:54 -05:00
Scott Lahteine
d1b619be52 Standardize some hexadecimals 2018-05-08 09:19:18 -05:00
Scott Lahteine
81b632c255 Additional temp-oriented improvements 2018-05-02 08:43:22 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
3f68203324 Modify FastIO error message 2018-04-28 20:27:36 -05:00
Scott Lahteine
a474a7e675 Correct AVR_ATmega328_FAMILY macro 
…as with #10540

Co-Authored-By: per1234 <per1234@users.noreply.github.com>
 2018-04-27 03:13:46 -05:00
Scott Lahteine
456cf971af HAL FastIO cleanup and fixes 2018-04-26 00:40:16 -05:00
J.C. Nelson
5b5e322356 Set Interrupt Priorities and Grouping for STM32F103. (#10517) 2018-04-26 00:21:16 -05:00
Scott Lahteine
2578996631
[2.0.x] Emergency parser for multiple serial ports (#10524) 2018-04-25 20:58:00 -05:00
Chris Pepper
2242b98248 [LPC176x] Emergency Parser Feature (#10516) 2018-04-25 06:44:26 -05:00
Eduardo José Tagle
c1e5ebbc1e [2.0.x] AVR: Atomic bit set and clear of upper pin ports without critical section (#10502) 
* AVR: Atomic bit set and clear

The critical section can be dropped, saving 3 cycles per access. Also simplified pin toggling for all ports.
 2018-04-24 13:45:43 -05:00
Scott Lahteine
a3ce8a3fcd Add sanity checks for EMERGENCY_PARSER 2018-04-24 09:24:26 -05:00