Commit Graph

8772 Commits

Author SHA1 Message Date
Scott Lahteine
2355d87e11 Merge pull request #6346 from thinkyhead/rc_broken_abl_test
Add support for SOLENOID_PROBE
2017-04-14 18:36:32 -05:00
Scott Lahteine
f4685c28b7 Reorder Conditionals_post.h and add comments 2017-04-14 18:18:21 -05:00
Scott Lahteine
5135be14ea Include Travis CI tests for 5 extruders / e-steppers 2017-04-14 18:18:20 -05:00
Scott Lahteine
0ac2b5c045 Additional 5 extruders support (solenoids, microstepping) 2017-04-14 18:18:20 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
5803ba43a9 Expose EXT_SOLENOID as an advanced option 2017-04-14 17:24:36 -05:00
Scott Lahteine
ea734f910b Use direct pin manipulation whenever possible 2017-04-14 16:55:35 -05:00
Scott Lahteine
19d0c6a0c0 Patch to init W with RGBW_LED 2017-04-14 16:55:23 -05:00
Scott Lahteine
3e079660b0 Never define SLED_PIN 2017-04-14 16:36:32 -05:00
Scott Lahteine
76765a8279 Merge pull request #6337 from thinkyhead/rc_core_endstop_fix
CORExx endstop detection fixes
2017-04-14 14:24:58 -05:00
benlye
1a447d0047 Fix variant conditional for 1284p 2017-04-14 18:46:09 +01:00
benlye
1f9ee42750 Fix lcd_babystep_zoffset()
Resolve 'steps_to_mm was not declared in this scope' compilation error after recent changes to merge babystepping with M851
2017-04-14 18:38:35 +01:00
Bob-the-Kuhn
445d39e95a CORExx endstop detection fixes
1. The CORExx printers were checking more endstop axis than needed.

2. Removed all the CORE_xx_NOT logic.  The motor_direction(xx) routine
always returns the correct data so it is not needed.  It was actually
cause the wrong direction to be checked in some cases.

3. Made the logic/defines for X, Y & Z axis all the same.  The old logic
checked inappropriate configurations for Y and didn't check all the
correct configurations on Z.

4. Added a check for zero steps before the X, Y & Z axis.  Previously
would check the they axis even if there were no movement.
2017-04-13 21:43:37 -05:00
Roxy-3D
28fec61f92 M100 Fixes and Features
All the memory accesses need to be unsigned char in  order to avoid
false errors being detected.   Two new features are available for
developers to call into the M100 functionality to look for data
corruption.
2017-04-13 18:20:53 -05:00
Scott Lahteine
2f2835e622 Merge pull request #6332 from thinkyhead/rc_babystep_zprobe
Make BABYSTEP_ZPROBE_OFFSET an optional feature
2017-04-13 16:50:08 -05:00
Scott Lahteine
52c3ace102 Add BABYSTEP_ZPROBE_OFFSET as an optional feature 2017-04-13 16:29:43 -05:00
Scott Lahteine
cd4e6abec8 Group BABYSTEPPING options together 2017-04-13 16:26:45 -05:00
Scott Lahteine
972c9655e9 Merge pull request #6245 from thinkyhead/rc_babystep_zprobe
BABYSTEPPING updates Z probe offset
2017-04-13 16:06:07 -05:00
Scott Lahteine
60ac41a32c Add code to handle changes to zprobe_zoffset 2017-04-13 15:46:35 -05:00
Scott Lahteine
8fa4209916 Movement/adjustment should be reverse of probe offset change 2017-04-13 15:46:05 -05:00
Thomas Moore
361655828f Use babystepping to adjust bed probe z-offset 2017-04-13 15:46:05 -05:00
Scott Lahteine
36e5c7c389 Merge pull request #6330 from thinkyhead/rc_improvements
Sanity check per-axis options' array sizes
2017-04-13 13:08:44 -05:00
Scott Lahteine
02fca543bb Merge pull request #6272 from thinkyhead/rc_adc_variable_rate
Make ADC sensor reading frequency adjustable
2017-04-13 12:49:31 -05:00
Scott Lahteine
34308368c0 Sanity check per-axis settings for size 2017-04-13 11:35:20 -05:00
Scott Lahteine
ac96ae89f9 Apply const in Stepper::isr 2017-04-13 06:20:36 -05:00
Scott Lahteine
2fa1e882d0 Merge pull request #6325 from thinkyhead/rc_M20_with_size
Simplified M20 with size
2017-04-13 05:06:52 -05:00
Bob-the-Kuhn
1b12fea0fa simplified M20 with size 2017-04-13 04:56:58 -05:00
Scott Lahteine
4022b971db Merge pull request #6315 from thinkyhead/rc_unify_M421
Unify M421
2017-04-12 19:43:28 -05:00
Scott Lahteine
b236562354 Merge pull request #6306 from thinkyhead/cleanup_after_6302
Adjustments to M100
2017-04-12 19:12:27 -05:00
Scott Lahteine
5e4f4d387f Swap MBL z_values dimensions to [X][Y] 2017-04-12 17:24:05 -05:00
Scott Lahteine
f81b518a03 Add Travis tests for optional M100 features 2017-04-12 17:07:22 -05:00
Scott Lahteine
063f641651 Unify M421 2017-04-11 15:46:13 -05:00
Scott Lahteine
6d5400dc31 Merge pull request #6240 from thinkyhead/rebuild_rgb_led
Extend RGB LED with Printer Events
2017-04-11 15:16:57 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
c7063eb55c theTarget => target_temp 2017-04-11 12:15:41 -05:00
Scott Lahteine
36bda2bade Add HAS_RESUME_CONTINUE shorthand macro 2017-04-11 12:15:40 -05:00
Scott Lahteine
53e6c33c37 2 is DXC_DUPLICATION_MODE 2017-04-11 12:15:40 -05:00
Scott Lahteine
a2cb0a3d54 Use multiply for delta probe constraint 2017-04-11 12:15:40 -05:00
Scott Lahteine
6487c96a4a Merge pull request #6313 from Kaibob2/patch-10
Allow 10mm Movements for Z-Axis
2017-04-11 12:04:10 -05:00
Scott Lahteine
944218f7da Merge pull request #6309 from thinkyhead/rc_fix_minimum_pulse
Fix MINIMUM_STEPPER_PULSE calculations
2017-04-11 11:54:26 -05:00
Kai
001bc14255 Allow 10mm Movements for Z-Axis
I use the movement options via LCD quite often. Especially to get the nozzle out of the way. I see no reason, why the 10mm option is disabled for the Z-Axis, this is why i always delete this line when i compile a new version.
If this is unwanted, please just close this PR
2017-04-11 18:39:26 +02:00
Scott Lahteine
6a9b008044 Fix MINIMUM_STEPPER_PULSE maths 2017-04-11 11:11:17 -05:00
Scott Lahteine
68773f4486 Simplify stepper macros by renaming enable/disable macros 2017-04-11 11:10:26 -05:00
Scott Lahteine
e02a5a6371 Add macros for delays by machine cycle 2017-04-11 09:18:32 -05:00
Scott Lahteine
4ea447959e Merge pull request #6311 from thinkyhead/rc_bare_M109_M190
Have M109 / M190 do nothing with no parameters
2017-04-11 06:10:31 -05:00
Scott Lahteine
ecc537015a Have M109 / M190 do nothing with no parameters 2017-04-11 05:06:25 -05:00
Scott Lahteine
03aa9a390e Apply coding standards to M100, break up into functions 2017-04-10 21:09:43 -05:00
Scott Lahteine
48c16fc6ef Merge pull request #6307 from thinkyhead/rc_less_no_reentrance
Only lcd_synchronize needs no_reentry
2017-04-10 20:58:32 -05:00
Scott Lahteine
4fcfe926d6 Only lcd_synchronize needs no_reentry 2017-04-10 20:13:23 -05:00