ca30aee903
Fix "add_homeing" to "add_homing" to match changes
2014-10-07 00:16:27 -04:00
0733825fb1
Merge pull request #1099 from Fourmi/Marlin_v1
...
Update line 627 ,wrong number on thermistortables
2014-10-06 14:36:00 +02:00
af3e4d7510
Update line 627 ,wrong number on thermistortables
...
Wrong number on line 627 > i change number "12" by the correct number "13"
Soory
2014-10-06 14:21:44 +02:00
aaaf8fe8dd
Merge pull request #1068 from darkjavi/Marlin_v1
...
Added profile for RAMPS with 2 extruders and 1 fan, no heated bed
2014-10-06 13:41:38 +02:00
b360306881
Merge pull request #1073 from WingTangWong/wing-fix-float-delta
...
Wing fix float delta
2014-10-06 13:41:01 +02:00
ce85515428
Merge pull request #1082 from Fourmi/Marlin_v1
...
Add thermistor table
2014-10-06 13:39:36 +02:00
764921bdbf
Merge pull request #1091 from Aldert/patch-1
...
Update motion_control.cpp
2014-10-06 13:37:19 +02:00
c40c7b589b
Merge pull request #1095 from thinkyhead/codeclean
...
Simple code cleanup. Rename "homeing" to homing.
2014-10-06 13:36:48 +02:00
0f2e0525df
Merge pull request #1096 from thinkyhead/set-home
...
Proposed feature: Set Home Offsets
2014-10-06 13:36:11 +02:00
5ae02a361b
Merge pull request #1097 from thinkyhead/round-up-xyz
...
Adjust the Z display to hide float rounding errors
2014-10-06 13:35:00 +02:00
fb34265d75
Make hotend optional when compiling with lcd support
...
Signed-off-by: Matthew Schick <matthew.schick@gmail.com >
2014-10-06 00:19:07 -04:00
6e343ef2f0
Adjust the Z display to hide float rounding errors
2014-10-05 18:34:54 -07:00
2f6c57eadc
Proposed feature: Set Home Offsets
...
Add an item to the LCD menu that applies the current axis position to
the “add_homeing” offset.
2014-10-05 13:35:45 -07:00
f989bd5435
Simple code cleanup. Rename "homeing" to homing.
2014-10-05 13:20:53 -07:00
d1e4237e1d
Update motion_control.cpp
...
G03 Full circle did not work (G02 is working correct)
2014-10-04 09:24:09 +02:00
a664763e6f
Update thermistortables.h
...
Add another thermistor table (13),it's a cartridge thermistor up to +300°C,use with Hotend "Simple ONE" & "All In ONE"
Thx
2014-09-27 09:05:10 +02:00
b5dc228a7a
Update configuration.h
...
Add another comment for thermistor 13 ,use with Hotend "Simple ONE & All In ONE"
2014-09-27 09:02:58 +02:00
3cbb2f56c6
Update configuration.h
...
Add another comment on configuration.h for the value of thermistor.
I make a pull request on thermistortables.h with my thermistor (12),but y see there is a comment on configuration with number 12 but it's not present on thermistortables.h ?
Thx
2014-09-26 22:01:06 +02:00
c35736a140
Update thermistortables.h
...
Add another thermistor table,use with hotend "Simple ONE" & "All in ONE"
2014-09-26 21:49:07 +02:00
cb4a6dd2dc
Merge pull request #1065 from oliasmage/Marlin_v1
...
Corrected retract() call for use of auto probe without sled enabled.
2014-09-19 15:12:09 -04:00
01e9b536cb
Fix build for non-sled bed auto levelling
...
This function should only be used with sled, not all bed auto
levelling.
2014-09-19 19:42:32 +01:00
58eabd21fb
Added ifndef
2014-09-16 14:31:58 -07:00
88d12a762a
Added #ifndef DELTA wrapper to float delta
2014-09-16 14:29:44 -07:00
bf0ecedf60
Merge pull request #1051 from fsantini/EZ_fix935
...
Fix issue 935: error in matrix calculation
2014-09-14 21:49:15 -03:00
40ba644bb4
Added profile for RAMPS with 2 extruders and 1 fan.
...
modified: Marlin/Configuration.h
modified: Marlin/pins.h
2014-09-06 02:53:36 +02:00
3b8216bdd1
Corrected #endif and ifdef for Z_PROBE_SLED code.
2014-09-04 16:40:22 -04:00
37799f70ba
Corrected retract() call for use of auto probe without sled enabled.
2014-09-04 14:36:39 -04:00
1e9dc85148
Do not use translations for the serial console messages
...
The serial protocol has to stay machine readable, without having
to cope with a ton of different human language variants. So
just leave it at the original english version.
Should fix ErikZalm/Marlin#1052
2014-08-29 18:02:59 +02:00
cf325ba240
Fix issue 935: error in matrix calculation
2014-08-28 21:10:50 +02:00
018b68a5c4
Merge pull request #976 from cocktailyogi/SCARA_by_Yogi
...
Implemented SCARA-Maths
2014-08-28 16:32:52 +02:00
dde61d8886
Merge pull request #977 from OskarLinde/Marlin_v1
...
Fix lcd itostr3() to handle negative numbers
2014-08-28 16:31:53 +02:00
0fbfb1bf82
Merge pull request #991 from bonm014/patch-1
...
Leapfrog controller board support
2014-08-28 16:27:52 +02:00
8340ca6e05
Merge pull request #992 from Grogyan/patch-1
...
temperature.cpp fixes for SD card and MAX6675
2014-08-28 16:27:14 +02:00
9887555192
Merge pull request #998 from darconeous/pull-requests/fwretract
...
FWRETRACT fixes
2014-08-28 16:24:51 +02:00
105571ec68
Merge pull request #1005 from midopple/Marlin_v1
...
With option DISABLE_INACTIVE_EXTRUDER the extruder is disable to early
2014-08-28 16:24:14 +02:00
68dd5e635e
Merge pull request #1024 from oliasmage/Marlin_v1
...
Adding Z Probe via sled mounted endstop
2014-08-28 16:15:54 +02:00
25069ed4e9
Merge pull request #1031 from Roxy-3DPrintBoard/Z_PROBE_REPEATABILITY-with-correct-Defaults
...
Z probe repeatability with correct defaults
2014-08-28 16:14:10 +02:00
5908fd5cec
Fix reseting CHDK pin to LOW
...
chdkActive was set to false regardless of (millis() - chdkHigh) being bigger than the CHDK_DELAY or not. So if (millis() - chdkHigh) wasn't bigger than the delay the first time, the CHDK would never be set back to LOW.
Also, don't return from the function, as there might be other stuff to do, after the CHDK check.
2014-08-11 14:12:32 +02:00
0adbc79571
Fix Default Configuration so Auto Bed Leveling is off
...
This snapshot has the Auto Bed Leveling turned off because most Marlin
users do not have that feature.
2014-08-10 10:18:54 -05:00
0091865583
Z_PROBE_REPEATABILITY test
...
Z_PROBE_REPEATABILITY test for Auto Bed Leveling.
Implemented as M48 with extra user specified options.
Full support at
http://3dprintboard.com/showthread.php?2802-Auto_Bed_Leveling-Z-Probe-Repeatability-code
2014-08-09 15:37:23 -05:00
e7707aedbc
Commented out new #defines in Configuration.h.
2014-08-04 10:18:25 -04:00
0a8dc0e96b
Added documentation to the README.md for the sled Z probe option. CAB
2014-08-04 10:07:43 -04:00
d2fcb3ee56
CAB: Added code for Z-probe with Z endstop mounted on a sled.
2014-08-01 11:29:59 -04:00
c13a831ea1
Merge pull request #1017 from foosel/fix/checksum_truncation_bug
...
Fix for a wrong checksum truncation for certain commands
2014-07-24 19:41:34 +02:00
2d22902d08
Fix for a wrong checksum truncation for certain commands
...
Positioning of string terminator to truncate checksum from the commands
M23, M28, M30, M32, M928 and M117 was off by one, causing the last
letter of the actual command to be truncated instead of just the
checksum.
In case of the SD commands this caused checksummed commands targeting
existing files to fail since the last letter of the filename was
truncated.
In case of M117 this caused the last given letter not to be displayed.
This patch fixes the off-by-one error and sets the null terminator
on the exact position of the * starting the checksum instead of the
character before that.
2014-07-24 12:04:02 +02:00
ad3b770c1a
updated examples
2014-07-20 13:55:13 +02:00
2f4a20257c
imported last Marlin changes
2014-07-20 13:49:26 +02:00
aacff0d361
Merge pull request #948 from Dim3nsioneer/Marlin_v1
...
Implementation of FW extruder change retract
2014-07-18 16:10:15 +02:00
17aa67e4ea
If the option DISABLE_INACTIVE_EXTRUDER ist active the extruder switch to early to inactive because there are some moves in the buffer. So the planner wait 32 moves to disable the unused extruder.
2014-07-13 21:52:32 +02:00
1fd9a7d476
Fix for FWRETRACT on DELTA printers.
...
Fixes #817
2014-07-09 09:24:26 -07:00
