Scott Lahteine
54a12ee1d6
Tweak eeprom storage type
2020-03-25 21:07:08 -05:00
Scott Lahteine
d6a4c3079d
Tweak ui.finish_status
2020-03-25 21:07:08 -05:00
Giuliano Zaro
8122468a36
Update Italian language ( #17293 )
2020-03-25 21:05:36 -05:00
Acenotass
5c150c0c94
Update Russian language ( #17290 )
2020-03-25 21:04:57 -05:00
Scott Lahteine
5ec1a8bb2b
Fix M0 unused var warning
2020-03-25 20:27:21 -05:00
Scott Lahteine
dd6781217a
motion.cpp: HAS_DIST_MM_ARG
2020-03-25 19:21:48 -05:00
Scott Lahteine
0175189c34
Allow G2_PWM to be slimmer
2020-03-25 19:18:42 -05:00
Scott Lahteine
adb6334ba0
Use "dist" instead of "delta" for clarity
2020-03-25 19:18:42 -05:00
thinkyhead
4dea020050
[cron] Bump distribution date (2020-03-26)
2020-03-26 00:03:54 +00:00
Scott Lahteine
c86ee574ec
Drop old comment
2020-03-25 15:11:12 -05:00
Scott Lahteine
f2ed18d150
M303 followup
...
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off ( #17284 )
...
M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
thinkyhead
0aeee64cca
[cron] Bump distribution date (2020-03-25)
2020-03-25 00:03:18 +00:00
Roxy-3D
075a86b076
Update LCD timing on Formbot T-Rex 2+ machines
...
The code is slightly more optimized than it used to be and this has caused the setup and hold times on the Formbot T-Rex 2+ machines to be insufficient. This change gives sufficient margin and the LCD Display is clean again.
2020-03-24 17:15:03 -05:00
Roxy-3D
5d515c3a2f
Adjust for timing shift on Max7219 displays on AVR's
...
Something has shifted. The previous timing delays on the Max7219 debug displays is too tight without this correction.
I suspect something has been optimized and roughly 50ns of needed setup and hold time has disappeared.
This corrects the issue and the display results are clean again.
2020-03-24 17:08:31 -05:00
Scott Lahteine
68face848a
Sanity check CONTROLLERFAN_SECS
2020-03-24 16:41:21 -05:00
Scott Lahteine
7455bb09b3
Add SoftwareSerialM for MKS Robin ( #17207 )
2020-03-24 16:14:30 -05:00
ellensp
41e944da00
Fix Emergency Parser on DUE ( #17276 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-24 15:14:52 -05:00
MarkMan0
4113481c4e
Fix limits on acceleration editing ( #17280 )
2020-03-24 15:13:37 -05:00
mkpfalz
3260228009
Sanity-check CORE backlash axes ( #17279 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-24 14:08:55 -05:00
rado79
bef9b9b07e
Delay after homing_backoff for CoreXY sensorless homing ( #17273 )
2020-03-23 20:32:36 -05:00
thinkyhead
edd6f6c5f2
[cron] Bump distribution date (2020-03-24)
2020-03-24 00:03:08 +00:00
Scott Lahteine
c87d73045b
Fix extra M114 output line
...
Fixes #17255
2020-03-23 18:31:26 -05:00
George Fu
e3ebbe25e0
DGUS updates ( #17260 )
2020-03-23 18:00:22 -05:00
ellensp
cd4060a99c
Add USB serial support to SERIAL_PORT_2 on DUE ( #17245 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-23 17:55:21 -05:00
Scott Lahteine
adb7a88428
Fix an unused var warning
2020-03-23 17:35:43 -05:00
Scott Lahteine
580d314fbe
Skip impossible PWM sanity-checks
2020-03-23 17:35:43 -05:00
Scott Lahteine
fe154fa5de
Fix CONTROLLER_FAN options compile
2020-03-23 17:35:43 -05:00
RasmusAaen
717c216851
Fix Copymaster Y_MAX pin ( #17267 )
2020-03-23 17:34:38 -05:00
thinkyhead
27c281eec3
[cron] Bump distribution date (2020-03-23)
2020-03-23 00:03:08 +00:00
Scott Lahteine
2460a3dfbb
Fix custom version file include
2020-03-21 23:34:19 -05:00
Scott Lahteine
2c325c2a7d
Format some pins files
2020-03-21 21:18:46 -05:00
Scott Lahteine
e62b52da99
Use pin/port names for CHITU pins
2020-03-21 21:18:46 -05:00
Scott Lahteine
7988e31f5e
whitespace
2020-03-21 21:16:15 -05:00
thinkyhead
29874b21b6
[cron] Bump distribution date (2020-03-22)
2020-03-22 00:03:15 +00:00
Scott Lahteine
04cea864bc
Split up STM32 pins files ( #17212 )
2020-03-20 23:45:00 -05:00
thinkyhead
3151856e98
[cron] Bump distribution date (2020-03-21)
2020-03-21 00:03:28 +00:00
thinkyhead
1738c13bc2
[cron] Bump distribution date (2020-03-20)
2020-03-20 00:03:07 +00:00
George Fu
71db5c1605
Fix FYSETC mini 12864 init / glitches ( #17209 )
2020-03-19 14:11:55 -05:00
thinkyhead
14daf1ee5e
[cron] Bump distribution date (2020-03-19)
2020-03-19 00:03:40 +00:00
InsanityAutomation
84dec5da10
Add M42 M, improve M43 ( #17173 )
2020-03-18 16:12:51 -05:00
Scott Lahteine
de45ac41ad
Implement CONTROLLER_FAN_USE_Z_ONLY
...
Followup to #17149
2020-03-18 14:36:40 -05:00
Erkan Colak
83eec683c9
New Controller Fan options and M710 gcode ( #17149 )
2020-03-18 13:41:12 -05:00
Scott Lahteine
abea6d5787
Tweak some lambdas
2020-03-18 10:33:15 -05:00
thinkyhead
252178fe62
[cron] Bump distribution date (2020-03-18)
2020-03-18 00:04:28 +00:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Joe Prints
1f5824247f
More decimal places for babystep / Z probe offset ( #17195 )
2020-03-17 15:12:52 -05:00
Scott Lahteine
e8205af6fb
Apply HAS_TMC_UART to pins files
2020-03-17 15:06:01 -05:00
Karl Andersson
e5dcab8fd2
ARMED support for TMC UART, probe temp ( #17186 )
2020-03-17 15:05:12 -05:00
ellensp
40922c7da7
Fix MKS SBASE 1.6 E1 heater pin ( #17191 )
2020-03-17 14:51:57 -05:00
thinkyhead
c1672220fd
[cron] Bump distribution date (2020-03-17)
2020-03-17 00:04:33 +00:00
Scott Lahteine
f6e80d576d
Fix Z_MIN_PROBE_PIN on SKR 1.4 ( #17187 )
2020-03-16 17:49:33 -05:00
Scott Lahteine
b14c933171
LPC1768 EEPROM fallback to flash, add overrides ( #17184 )
2020-03-16 15:59:05 -05:00
Pascal de Bruijn
2fc0df1b39
Shorter LCD remaining time to prevent overlap ( #17181 )
2020-03-16 14:11:55 -05:00
thinkyhead
a662079cbc
[cron] Bump distribution date (2020-03-16)
2020-03-16 00:04:45 +00:00
InsanityAutomation
775a4294fc
Configurable SLOWDOWN divisor ( #17171 )
2020-03-15 18:29:18 -05:00
Giuliano Zaro
3b987dfcec
Fix G34 Z lower, extra "BLTOUCH" debug line ( #17175 )
2020-03-15 18:23:24 -05:00
Scott Lahteine
c39873759f
Fix Z after ABL Bilinear G29 with fade
...
Co-Authored-By: Alan T <interstellarmisfit@users.noreply.github.com>
2020-03-15 18:18:38 -05:00
Karl Andersson
85187290a7
Fix incorrect type on ubl_storage_slot ( #17170 )
2020-03-15 18:03:10 -05:00
Scott Lahteine
695e014075
Do later mounting of LCD-based SD
2020-03-14 19:24:35 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
095a1123c1
Add a global machine state
2020-03-14 19:24:35 -05:00
thinkyhead
5c1970a229
[cron] Bump distribution date (2020-03-15)
2020-03-15 00:04:39 +00:00
Roxy-3D
9f85165101
Allow Tool Offset adjustments to have another digit of precision
...
Some of the items in the Tool Offset Adjustment menu (in particular, the Z Offset!!!) were only adjustable with .1mm accuracy.
This is not enough. So the edit menu is switched to float52 to fix the issue.
2020-03-14 18:12:29 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
InsanityAutomation
cee07f3f6b
Quad Z leveling, G34 (R)ecalculate ( #17122 )
2020-03-13 23:22:04 -05:00
Scott Lahteine
118bd2f8b2
Apply loop shorthand macros ( #17159 )
2020-03-13 23:18:16 -05:00
Scott Lahteine
a96be32fae
Fix G26 corrupted position
2020-03-13 19:27:02 -05:00
thinkyhead
983a8cee45
[cron] Bump distribution date (2020-03-14)
2020-03-14 00:04:00 +00:00
Scott Lahteine
6bead0c1b0
Shorter paths to HAL, ExtUI ( #17156 )
2020-03-13 16:29:29 -05:00
Scott Lahteine
ad980a72f7
M0 Q preserve status
2020-03-13 14:42:42 -05:00
Scott Lahteine
7ec45f4382
Fix end of short (auto0.g) prints
2020-03-13 13:59:17 -05:00
Scott Lahteine
81b0548518
Fix Emergency Parser stuck state
2020-03-13 13:59:17 -05:00
Erkan Colak
aa32c47fb5
Shorten German BLTouch menu item names ( #17151 )
2020-03-13 12:34:03 -05:00
nick-diel
7070ea0b49
Add OnPidTuning event to Malyan LCD ( #17143 )
...
All ExtUI LCDs need to keep up with ExtUI API changes.
2020-03-12 19:48:33 -05:00
Scott Lahteine
59cb1466b7
Fix DUGS / DGUS typo
2020-03-12 19:30:18 -05:00
Jason Smith
9c759e5f74
Fix BAUD_RATE_GCODE, etc. ( #17135 )
2020-03-12 19:26:09 -05:00
thinkyhead
8c11ecaf73
[cron] Bump distribution date (2020-03-13)
2020-03-13 00:04:16 +00:00
thinkyhead
1f55986ed2
[cron] Bump distribution date (2020-03-12)
2020-03-12 00:04:11 +00:00
Scott Lahteine
318a16637b
Fix M810 macro multiple use
...
Fixes #17125
2020-03-11 17:15:39 -05:00
BigTreeTech
8bad6e11e2
Fix STM32 _WRITE macro parameter ( #17121 )
2020-03-11 16:42:28 -05:00
Scott Lahteine
112245ee48
More explicit EEPROM types ( #17127 )
2020-03-11 16:41:18 -05:00
Scott Lahteine
924fa6045c
Non-const REMEMBER needed for RESTORE
2020-03-11 15:25:16 -05:00
Daniel Kreuzhofer (@danieldotnet)
f29d6f802f
Revert Anet 1.x envs change ( #17120 )
2020-03-11 15:08:47 -05:00
George Fu
201c991cfa
Fix and update DGUS displays ( #17072 )
2020-03-11 03:40:30 -05:00
Jamie
23c5701178
Apply soft limits to joystick jogging ( #17114 )
2020-03-10 22:59:49 -05:00
Scott Lahteine
eb6c992bfb
Announce SD file open
...
Requested in #17110
2020-03-10 22:54:19 -05:00
Gurmeet Athwal
bd44f041e8
M220 print FR percentage ( #17101 )
2020-03-10 20:13:59 -05:00
Daniel Kreuzhofer (@danieldotnet)
d78fbce827
Fix pio environments for Anet 1.x ( #17109 )
2020-03-10 20:04:44 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
e7004550c4
Tweaks to finishSDPrinting ( #17082 )
2020-03-10 19:42:57 -05:00
thinkyhead
a31b7339cd
[cron] Bump distribution date (2020-03-11)
2020-03-11 00:04:19 +00:00
Scott Lahteine
4e3a793f1e
Fix broken enqueue_P
2020-03-10 18:28:49 -05:00
Scott Lahteine
9bff67bc74
Always look for PLR file, but more quickly
2020-03-10 17:07:14 -05:00
Vert
8bbcbc528c
Fix Z4 stepper indirection macros ( #17107 )
2020-03-10 15:57:10 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
thinkyhead
8799f8bfdb
[cron] Bump distribution date (2020-03-10)
2020-03-10 00:04:08 +00:00
Scott Lahteine
972d1bf5b4
Ensure welcome message
2020-03-09 18:19:37 -05:00
Scott Lahteine
b5530775c9
Add debug logging for setup()
2020-03-09 17:46:49 -05:00
Scott Lahteine
13118dbd8d
Additional numtostr functions
2020-03-09 17:46:49 -05:00
Scott Lahteine
0f39386d9b
Make BOOTSCREEN_TIMEOUT generally available
2020-03-09 17:46:49 -05:00
Scott Lahteine
b579f5dc99
Move 'last_pause_state' closer to usage
2020-03-09 17:46:49 -05:00
thinkyhead
7f490c08da
[cron] Bump distribution date (2020-03-09)
2020-03-09 00:04:03 +00:00
Scott Lahteine
982197b162
Fixes for Z4 axis, CS pins ( #17097 )
2020-03-08 16:31:37 -05:00
MangaValk
57f488738b
[ToolChanger] Lock the current tool at power-up ( #17093 )
2020-03-08 16:13:41 -05:00
Scott Lahteine
b21edce943
More general SD_DETECT_INVERTED override
2020-03-08 14:47:16 -05:00
Scott Lahteine
2a71e4f336
Revert that wack backoff
2020-03-07 23:10:56 -06:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
thinkyhead
5eb6fb1c2f
[cron] Bump distribution date (2020-03-08)
2020-03-08 00:04:21 +00:00
Scott Lahteine
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
Scott Lahteine
3db784f3c7
More pins debugging cleanup
2020-03-07 02:15:05 -06:00
Scott Lahteine
7b9eb233cb
Emergency Parser dumb terminal compatibility
2020-03-07 02:15:05 -06:00
Scott Lahteine
c99773bae0
Max7219 suspend/resume
2020-03-07 01:18:26 -06:00
Scott Lahteine
8ff25a9566
Max7219 init last
2020-03-07 00:16:44 -06:00
Scott Lahteine
e9f451bffe
Pins debug followup
2020-03-06 21:59:20 -06:00
thinkyhead
3b14158979
[cron] Bump distribution date (2020-03-07)
2020-03-07 00:04:33 +00:00
Scott Lahteine
913de024a9
Change PID dummy value to NAN
...
Fixes #17078
2020-03-06 13:55:27 -06:00
Scott Lahteine
1da49d0ac5
Non-blocking Max7219 test pattern
2020-03-06 13:19:38 -06:00
Scott Lahteine
ca4423ed2a
Clean up pins debugging
2020-03-06 13:14:22 -06:00
Scott Lahteine
6cd99e6a77
Add pins to the pins debug list
2020-03-06 13:14:22 -06:00
Scott Lahteine
6d18f715e4
Fix M0/M1 message string
2020-03-06 13:14:22 -06:00
thinkyhead
459a0dae29
[cron] Bump distribution date (2020-03-06)
2020-03-06 00:04:16 +00:00
Scott Lahteine
3a72b0fd41
Update Chinese (TW) language ( #17071 )
2020-03-05 15:39:49 -06:00
Scott Lahteine
f0248c9ed9
Update Turkish language ( #17070 )
2020-03-05 15:37:02 -06:00
Scott Lahteine
c0801e900d
Define Z_MIN_PROBE_PIN for Cohesion 3D Remix
2020-03-05 15:10:46 -06:00
Scott Lahteine
e3da86fb45
Fix SKR test for ONBOARD SD
2020-03-05 13:37:09 -06:00
thinkyhead
7e58739a1f
[cron] Bump distribution date (2020-03-05)
2020-03-05 00:04:13 +00:00
Scott Lahteine
631addbbb4
SAMD51 SoftwareSerial ( #17041 )
2020-03-04 13:15:32 -06:00
Scott Lahteine
d4ac78535c
Allow Z_STOP_PIN override on SKR 1.4 ( #17063 )
2020-03-04 13:12:48 -06:00
Scott Lahteine
70863fbd55
Avoid name conflict with 'UART'
2020-03-04 12:50:58 -06:00
Scott Lahteine
7709261ea9
Move shared code to wait_for_bed_heating
2020-03-04 12:50:57 -06:00
thinkyhead
ab1863ac48
[cron] Bump distribution date (2020-03-04)
2020-03-04 00:04:06 +00:00
Scott Lahteine
72b63e9520
Fix TEMP_PROBE_PIN for SKR 1.4
...
Co-Authored-By: Anthrix <anthrix@users.noreply.github.com>
2020-03-03 14:53:22 -06:00
George Fu
a698bfdc2a
Update FYSETC S6 pins/variants ( #17056 )
2020-03-03 14:30:09 -06:00
Scott Lahteine
83a60f15ff
Fix EEPROM compile errors
2020-03-03 14:21:07 -06:00
Scott Lahteine
c083728e4c
General code cleanup
2020-03-03 14:20:37 -06:00
Scott Lahteine
5e28b0f471
Minor EEPROM cleanup
2020-03-02 21:56:21 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
Scott Lahteine
5171e9da93
No more direct G28 calls
2020-03-02 21:01:58 -06:00
thinkyhead
12d05e4835
[cron] Bump distribution date (2020-03-03)
2020-03-03 00:04:10 +00:00
Scott Lahteine
07e22d1d65
Neopixel on LPC uses GPIO toggling
2020-03-02 17:20:01 -06:00
Scott Lahteine
646599d0d9
Finish M900 updates
2020-03-02 17:10:51 -06:00
Scott Lahteine
eb4d5120bf
Keep name around for old configs
2020-03-02 16:23:17 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery ( #17051 )
2020-03-02 16:07:53 -06:00
jufimu12
ad4a9eb73a
Fix G34 probing range/error bug ( #17052 )
2020-03-02 13:35:02 -06:00
Scott Lahteine
5aa528781f
Fix ambiguous type
...
Co-Authored-By: Andrew Kroll <xxxajk@gmail.com>
2020-03-02 13:23:07 -06:00
ellensp
af23c0480e
Don't define 'valptr' if unused ( #17048 )
2020-03-02 13:17:52 -06:00
ellensp
624ab24a5c
Suppress thisItemNr warning ( #17049 )
2020-03-02 13:14:08 -06:00
Jason Smith
66334820ca
Add TMC micro-steps sanity check ( #17044 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-02 13:13:04 -06:00
Scott Lahteine
2c4e054e9a
Fix fastio pin comment
2020-03-02 13:11:30 -06:00
Scott Lahteine
49c5f614c6
Minor motion style changes
2020-03-02 12:54:18 -06:00
Scott Lahteine
6b5347ee39
Improved M900
2020-03-02 12:05:00 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
736521a3f1
Balance mega tests, shorten some env names
2020-03-01 21:20:22 -06:00
Scott Lahteine
870a1f753a
Fix undefined STATUS_CHAMBER_WIDTH
2020-03-01 21:19:50 -06:00
Jason Smith
cc822bf70f
Fix some 8 extruders issues, GTR build ( #17043 )
2020-03-01 21:19:02 -06:00
Jason Smith
5da6819277
Fix build issues with REPRAPWORLD_KEYPAD ( #17038 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-03-01 19:54:22 -06:00
Scott Lahteine
362c9ae79a
Clean up use of extra_xyjerk
2020-03-01 19:23:48 -06:00
thinkyhead
ac93df43cd
[cron] Bump distribution date (2020-03-02)
2020-03-02 00:04:18 +00:00
ellensp
4b256a6fa8
Revert FYSETC Mini encoder change ( #17040 )
...
Reverting #17010
2020-03-01 17:59:00 -06:00
Jason Smith
4a3fcd0bf9
Fix three extruder with auto-fan build ( #17035 )
2020-03-01 17:37:16 -06:00
Scott Lahteine
edd1b76a9a
Fix set_current_from_steppers_for_axis(E_AXIS) bug
2020-03-01 14:36:21 -06:00
Scott Lahteine
c4db8e49a7
XYZ_CHAR macro
2020-03-01 14:36:06 -06:00
Scott Lahteine
3473b21710
Move millis_t includes
2020-03-01 09:50:53 -06:00
Scott Lahteine
5e9a10dbae
Use PSTR for common labels
2020-03-01 08:39:47 -06:00
thinkyhead
1d609d2bbd
[cron] Bump distribution date (2020-03-01)
2020-03-01 00:04:02 +00:00
Vert
6c9ca1bec2
Clarify GT2560 common pins ( #17021 )
2020-02-29 04:35:10 -06:00
Scott Lahteine
730804289c
Catch more LPC1768 pin conflicts ( #17019 )
2020-02-29 04:14:40 -06:00
ManuelMcLure
39c34e4992
Use ADC resolution in AD595/8495 calculation ( #17018 )
...
Fixes thermocouple reading on LP1768 (which uses 12-bit resolution).
2020-02-28 23:28:17 -06:00
thinkyhead
b946530ef6
[cron] Bump distribution date (2020-02-29)
2020-02-29 00:03:54 +00:00
ellensp
9b145c7c73
Reverse encoder for FYSETC Mini 12864 2.1 + SKR 1.3 ( #17010 )
2020-02-28 12:26:54 -06:00
jufimu12
ac755fce82
Fix G34 "Decreasing accuracy" bug ( #17013 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-02-28 11:42:51 -06:00
Scott Lahteine
97e87d8262
Fix G76 reachable test ( #17005 )
2020-02-27 22:47:44 -06:00
Anders Sahlman
c669420134
Pass along sanity_check for (G33) probing ( #17006 )
2020-02-27 19:58:35 -06:00
thinkyhead
f8497b8171
[cron] Bump distribution date (2020-02-28)
2020-02-28 00:03:53 +00:00
Scott Lahteine
bfbd976c09
General G76 cleanup
2020-02-27 07:53:24 -06:00
Scott Lahteine
a75a25cd7c
Replace direct call to G28(true)
2020-02-27 07:48:34 -06:00
Scott Lahteine
4f55723527
RUMBA has 3 E plugs
2020-02-27 07:48:02 -06:00
Scott Lahteine
77b82d300a
Add idle_no_sleep
2020-02-27 06:45:33 -06:00
Scott Lahteine
e5d39063a2
Cleanups for PTC
2020-02-27 06:45:23 -06:00
Scott Lahteine
be62ab2d02
Move reachable test to Probe class
2020-02-27 06:16:33 -06:00
Roman Moravčík
9f8ee31144
Update Slovak language ( #17002 )
2020-02-27 03:38:46 -06:00
Makoto Schoppert
8164cac797
Fix planner.cpp compile ( #16996 )
2020-02-27 03:29:44 -06:00
thinkyhead
a80eda41bc
[cron] Bump distribution date (2020-02-27)
2020-02-27 00:03:42 +00:00
Scott Lahteine
bafe8d920a
Handle print completed LED event in M0
2020-02-26 12:02:54 -06:00
Scott Lahteine
633b716a3a
Define DIAG pins for MKS SGen-L
2020-02-26 11:35:07 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option ( #16932 )
2020-02-26 09:23:55 -06:00
Scott Lahteine
18b875dc9f
Allow print recovery after parking
2020-02-26 08:16:46 -06:00
Scott Lahteine
6fd7f4fe1b
Fix unified status bed temp display
2020-02-26 08:09:57 -06:00
Scott Lahteine
263a7beeb5
More extra travel jerk changes
...
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 07:24:36 -06:00
Scott Lahteine
6913a4dfa8
Prevent park_point compile error
2020-02-26 07:10:35 -06:00
Scott Lahteine
025c50cc6d
Quick-homing sensorless back-off ( #16872 )
2020-02-26 06:50:13 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
0a7e7a6fa5
Allow servo features in combination ( #16960 )
2020-02-26 06:26:54 -06:00
Scott Lahteine
daa32013b1
Sanity check for LPC serial pin conflict ( #16981 )
2020-02-26 06:26:30 -06:00
Scott Lahteine
ec1b86d9cb
Serial strings in macros
2020-02-26 05:38:33 -06:00
Scott Lahteine
cf597e2bb1
Allow weird probe values in G33
2020-02-26 05:33:57 -06:00
ellensp
e76f2ed4cb
Fix Trinamic pulse rate auto-assignment ( #16966 )
2020-02-26 04:34:21 -06:00
Scott Lahteine
b5c2190b38
String optimize followup
2020-02-26 04:32:40 -06:00
InsanityAutomation
28008aced0
Correct SKR expansion port pins ( #16974 )
2020-02-26 04:18:34 -06:00
ellensp
70af080813
Add LPC1768 Serial ports for pinsDebug ( #16980 )
2020-02-26 04:12:53 -06:00
Scott Lahteine
5ebba4b19f
More serial strings
2020-02-26 04:11:12 -06:00
InsanityAutomation
cdcd45d651
Set LCD status for EEPROM errors ( #16977 )
2020-02-26 03:04:02 -06:00
Scott Lahteine
e78f607ef3
Use a STR_ prefix for non-translated strings
2020-02-26 03:02:03 -06:00
Scott Lahteine
6b9a17be16
Language: "failsafe" => "Defaults"
2020-02-26 02:03:47 -06:00
InsanityAutomation
4250a98908
Toolchange improvements ( #16979 )
2020-02-26 00:12:14 -06:00
Scott Lahteine
5b438fb20d
HAS_SDCARD_CONNECTION is more obsolete
2020-02-25 22:30:30 -06:00
Scott Lahteine
5071fe82ab
Ensure proper SD print completion ( #16967 )
2020-02-25 22:18:14 -06:00
thinkyhead
91cff02596
[cron] Bump distribution date (2020-02-26)
2020-02-26 00:03:52 +00:00
Scott Lahteine
454cbcce51
Fix the wait loop in M0 / M1
2020-02-25 12:20:54 -06:00
InsanityAutomation
6bfae5de6f
Fix SKR 1.4 Turbo SD_DETECT_PIN ( #16955 )
2020-02-25 03:17:08 -06:00
InsanityAutomation
3e685777a8
Fix LCD cutter/bed icons overlapping ( #16956 )
2020-02-25 03:07:36 -06:00
Giuliano Zaro
d13b153230
Update Italian language ( #16947 )
2020-02-25 03:05:58 -06:00
thinkyhead
ca305b03b7
[cron] Bump distribution date (2020-02-25)
2020-02-25 00:04:00 +00:00
Scott Lahteine
9040394e8e
Fix card_eof error
2020-02-24 11:00:01 -06:00
Marcio T
92278a45ed
Allow Z_SAFE_HOMING_POINT outside bed ( #16945 )
2020-02-24 10:40:12 -06:00
Scott Lahteine
a254354e68
BS_TOTAL_AXIS => BS_TOTAL_IND
2020-02-24 06:11:43 -06:00
Scott Lahteine
5e197df89a
Fix Babystepping loop (again)
2020-02-24 05:48:42 -06:00
Scott Lahteine
8ba5ef8cae
"Init. Media" => "Attach Media"
2020-02-24 05:33:23 -06:00
Scott Lahteine
9a51f29efa
Simplified E_AXIS_HAS macro
2020-02-23 23:55:56 -06:00
Jason Smith
ebd2bcc177
Fix AXIS_HAS_SW_SERIAL
2020-02-23 21:59:31 -06:00
thinkyhead
9717b3044f
[cron] Bump distribution date (2020-02-24)
2020-02-24 00:03:56 +00:00
Jason Smith
2bcc2ec7d1
Reduce default TMC baudrate to 57600 with Software Serial ( #16930 )
2020-02-23 07:48:56 -06:00
Giuliano Zaro
529d57bddf
Sync Italian language ( #16935 )
2020-02-23 07:47:30 -06:00
Scott Lahteine
0ba18848af
Allow USE_GCODE_SUBCODES for debugging
2020-02-22 22:50:03 -06:00
Scott Lahteine
b2328d089a
Allow LCD_PIXEL_WIDTH/HEIGHT override
2020-02-22 21:36:21 -06:00
Scott Lahteine
29ec868c4b
Commit last SD line before fileHasFinished
2020-02-22 20:46:52 -06:00
Scott Lahteine
1d431fe8d2
Suppress "packed member" warning
2020-02-22 19:28:24 -06:00
ZMiguel Alves
2471a8bb91
Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 ( #16928 )
2020-02-22 18:45:10 -06:00
ellensp
7bf3581b02
Fix M0/M1 broken wait loop ( #16921 )
2020-02-22 18:37:39 -06:00
Scott Lahteine
b9b29bf4c0
Followup to babystep hotfix
2020-02-22 18:34:49 -06:00
thisiskeithb
20df64814e
Finish Custom User Menu sanity-check ( #16917 )
2020-02-22 18:33:34 -06:00
thinkyhead
34c92bbc17
[cron] Bump distribution date (2020-02-23)
2020-02-23 00:03:55 +00:00
vivian-ng
eeec4c27e7
[ESP32] Allow user to define pins for hardware Serial1 and Serial2 ( #16918 )
2020-02-22 04:00:10 -06:00
Scott Lahteine
484e1a624c
CoreXY Babystepping hotfix
2020-02-22 02:52:59 -06:00
Scott Lahteine
ac3e27c026
Hotfix for Babystepping
2020-02-22 02:52:21 -06:00
Scott Lahteine
1ab6f910b6
Use moves_free in ok_to_send
2020-02-22 02:30:59 -06:00
thinkyhead
cfd49740eb
[cron] Bump distribution date (2020-02-22)
2020-02-22 00:03:47 +00:00
Scott Lahteine
5d16497bed
Tweak pins spacing, comments
2020-02-21 08:33:11 -06:00
ellensp
9f53bbd791
Add PICA shields support ( #16891 )
2020-02-21 08:27:32 -06:00
Jamie
e1d367e05a
Fix EEPROM errors with EXTRUDERS == 0 ( #16898 )
2020-02-21 07:42:13 -06:00
Karl Andersson
f30897500d
Disable spreadcycle in tmc_enable_stallguard<2209> ( #16890 )
2020-02-21 07:40:55 -06:00
Tanguy Pruvot
68de12acbf
Followup to autoreport patch ( #16914 )
...
See a1f026f57a
2020-02-21 07:36:59 -06:00
Scott Lahteine
6320f9795c
More EEPROM cleanup
2020-02-20 20:56:13 -06:00
Scott Lahteine
22b974691e
Tweak process_line_done for speed
2020-02-20 20:36:51 -06:00
Scott Lahteine
4ef627d79f
Add a note on EEPROM todo
2020-02-20 20:36:50 -06:00
Scott Lahteine
19991e269b
Show end prompt with Print Event LEDs
2020-02-20 20:36:50 -06:00
Scott Lahteine
b8b225c8b5
Function for CONFIG_ECHO_HEADING
2020-02-20 20:36:50 -06:00
Scott Lahteine
a1f026f57a
Inline manage_inactivity, tweak autoreport_paused
2020-02-20 20:36:50 -06:00
Scott Lahteine
2b788e9aa6
Single envs for specific boards
2020-02-20 20:20:15 -06:00
thinkyhead
140e4ac507
[cron] Bump distribution date (2020-02-21)
2020-02-21 00:03:41 +00:00
Robby Candra
1c52d76668
Serial redirect for Move Command when stopping ( #16906 )
2020-02-20 02:22:07 -06:00
thinkyhead
178735b958
[cron] Bump distribution date (2020-02-20)
2020-02-20 00:03:52 +00:00
thinkyhead
4c179ba3f7
[cron] Bump distribution date (2020-02-19)
2020-02-19 00:03:54 +00:00
thinkyhead
05f51e9355
[cron] Bump distribution date (2020-02-18)
2020-02-18 00:03:31 +00:00
thinkyhead
75e3aa12c5
[cron] Bump distribution date (2020-02-17)
2020-02-17 00:03:58 +00:00
Scott Lahteine
99a5074372
Fix babystep include, typos in stepper.cpp
...
Fix #16881
2020-02-16 17:49:21 -06:00
vivian-ng
4c6f695bea
Put ESP32 I2S stepper task and Marlin on the same core ( #16874 )
2020-02-16 16:44:36 -06:00
Tanguy Pruvot
8bc3e63871
Update French language ( #16877 )
2020-02-16 16:39:17 -06:00
Giuliano Zaro
42208bc031
Fix unknown command on empty lines ( #16867 )
2020-02-16 01:10:20 -06:00
Giuliano Zaro
199a1ba0e5
Move SAMD51 Temperature timer to RTC ( #16868 )
2020-02-15 22:45:52 -06:00
Scott Lahteine
4360142bd1
Defer updated ADC
2020-02-15 22:37:16 -06:00
Scott Lahteine
ddce1c6ef2
Show '*' for zero 'stst' flag
2020-02-15 22:35:28 -06:00
Scott Lahteine
72fae2faa5
Require TMCStepper 0.6.2
2020-02-15 22:35:28 -06:00
Scott Lahteine
64a81f887a
EXPERIMENTAL integrated BABYSTEPPING ( #16829 )
2020-02-15 21:42:28 -06:00
Scott Lahteine
64b96f3908
Double ADC read frequency ( #16864 )
2020-02-15 19:10:46 -06:00
thinkyhead
52a1268089
[cron] Bump distribution date (2020-02-16)
2020-02-16 00:04:09 +00:00
Scott Lahteine
5584da388c
Conceal float rounding errors on display
...
Fix #16866
2020-02-15 02:55:41 -06:00
Scott Lahteine
efdaf940a5
Fix byte-to-percent display
...
Fixes #16866
2020-02-15 02:37:13 -06:00
Scott Lahteine
1087e318e5
Fix a BORG compile warning
2020-02-15 01:47:15 -06:00
thinkyhead
150237f712
[cron] Bump distribution date (2020-02-15)
2020-02-15 00:03:59 +00:00
George Fu
63dd0f249d
Fysetc S6 pins / LCD updates ( #16830 )
2020-02-14 07:18:57 -06:00
Scott Lahteine
0b984519c3
Clean up stepper and babystep ( #16857 )
2020-02-14 05:14:37 -06:00
Scott Lahteine
073e4443e8
Optimize "Dismiss" string
2020-02-14 00:05:06 -06:00
Scott Lahteine
00ba053c90
Clean up host actions code ( #16856 )
2020-02-13 23:39:27 -06:00
Giuliano Zaro
ff0c931e47
Add RAMPS 1.4.4 to AGCM4 ( #16606 )
2020-02-13 23:28:18 -06:00
Scott Lahteine
49a66bc4cc
Fix ESP32 warning, specify supported version
2020-02-13 19:22:13 -06:00
Scott Lahteine
f3f692adf7
Don't assert safe homing for delta/scara
2020-02-13 19:22:13 -06:00
Robby Candra
af84e362cc
Remove unused queue.stopped_N ( #16850 )
2020-02-13 18:59:32 -06:00
Gaston Dombiak
082117c4bb
Ping the job timer in M140 ( #16849 )
2020-02-13 18:43:47 -06:00
Giuliano Zaro
0e17d10bf3
Fix G-code line parsing ( #16840 )
2020-02-13 18:30:47 -06:00
thinkyhead
68077149e2
[cron] Bump distribution date (2020-02-14)
2020-02-14 00:04:13 +00:00
thinkyhead
62d7d49719
[cron] Bump distribution date (2020-02-13)
2020-02-13 00:03:34 +00:00
Scott Lahteine
1d8d91afc6
No limit needed on this raise
...
Remove an extraneous limit from #16811 .
2020-02-12 14:57:11 -06:00
Robby Candra
a83ad2d9d4
Define MarlinSerial instances for DGUS ( #16841 )
2020-02-11 20:30:20 -06:00
thinkyhead
0306c1bb0c
[cron] Bump distribution date (2020-02-12)
2020-02-12 00:03:54 +00:00
Giuliano Zaro
4a733796bd
Prevent pin glitches on out commutation ( #16835 )
...
Better for switching from pulled input to output and also set real output (with no input enabled).
2020-02-11 10:43:28 -06:00
Scott Lahteine
0fd0554b5f
Simplify old safe homing sanity check
2020-02-11 10:07:45 -06:00
Scott Lahteine
fa6e7cb733
Function-style critical section macros
2020-02-11 09:37:04 -06:00
Scott Lahteine
7b02a62da8
Fix up tests
2020-02-11 09:37:04 -06:00
Scott Lahteine
189c101793
Use prior babystep delay method ( #16833 )
2020-02-11 08:52:11 -06:00
Scott Lahteine
1c556cd90d
Recommend Z Safe Homing
...
Co-Authored-By: Vertabreaker <opyrus@hotmail.com>
2020-02-11 07:40:37 -06:00
Scott Lahteine
e442663e2a
No Z sensorless req'd if homing with probe
...
Fixes #16674
2020-02-11 04:15:25 -06:00
Scott Lahteine
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
Giuliano Zaro
d5790e09a5
Update SAMD51 EEPROM repo link ( #16832 )
2020-02-11 02:05:58 -06:00
thinkyhead
b26f7fca3f
[cron] Bump distribution date (2020-02-11)
2020-02-11 00:04:03 +00:00
Scott Lahteine
2836834d7e
Unify step pulse timing of ISR / babystep ( #16813 )
2020-02-10 16:58:21 -06:00
proferabg
3f87f912c5
Enable hotend / bed PID separately in ExtUI ( #16827 )
2020-02-10 16:48:22 -06:00
Scott Lahteine
fa4a6cdb5c
Fix out-of-order M0 after SD printing
...
Fixes #14774
Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>
2020-02-10 16:33:40 -06:00
Scott Lahteine
3bef7a4450
Add g-code quoted strings, improve stream code ( #16818 )
2020-02-10 14:52:15 -06:00
Daniel Mazurkiewicz
e561f744fa
Update MKS BASE and v1.6 pins ( #16806 )
2020-02-10 14:12:11 -06:00
Scott Lahteine
0b45493557
Add a caution to drivers.h
2020-02-09 21:58:12 -06:00
Scott Lahteine
18a7276909
Revert "Coolstep for TMC2130, 2209, 5130, 5160"
...
Reverting #16790 as not ready for primetime.
2020-02-09 21:22:26 -06:00
Scott Lahteine
28b48fc9bb
Revert change to AXIS_DRIVER_TYPE_X2
...
- Revisit this to figure out why it breaks
2020-02-09 20:49:55 -06:00
Scott Lahteine
a33d08928a
Tweak LPC1768 upload py script
2020-02-09 20:48:20 -06:00
thinkyhead
15e6ee6c7c
[cron] Bump distribution date (2020-02-10)
2020-02-10 00:03:46 +00:00
InsanityAutomation
a9549f7a08
Add PID, probe offsets to ExtUI ( #16792 )
2020-02-09 12:22:53 -06:00
InsanityAutomation
cc1ff27256
Bump config version to 020004 ( #16816 )
2020-02-09 12:15:02 -06:00
Scott Lahteine
0ce83dee95
Show print time with PRINTER_EVENT_LEDS
2020-02-09 11:37:43 -06:00
Scott Lahteine
38873596ec
Tweak parser warning
2020-02-09 11:37:43 -06:00
Scott Lahteine
ffcbba4447
Move MSG_MARLIN
2020-02-09 11:37:43 -06:00
Scott Lahteine
b9b07387d7
Minor HAL cleanup
2020-02-09 11:12:38 -06:00
Giuliano Zaro
90e2c42031
Adafruit Grand Central M4 fixes ( #16812 )
2020-02-09 09:57:22 -06:00
InsanityAutomation
84b6e11bd5
Better probe fail handling ( #16811 )
2020-02-09 07:46:38 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
thinkyhead
f0cbc85a07
[cron] Bump distribution date (2020-02-09)
2020-02-09 00:03:30 +00:00
Scott Lahteine
130e36d766
Tweak ABL logging, document probing
2020-02-08 17:47:54 -06:00
thinkyhead
38bf5523e1
[cron] Bump distribution date (2020-02-08)
2020-02-08 00:02:22 +00:00
thinkyhead
12b3807a7f
[cron] Bump distribution date (2020-02-07)
2020-02-07 00:02:48 +00:00
Robert Stein
3a3429b1ef
Fix probe with multi-endstops ( #16793 )
2020-02-06 15:28:46 -06:00
Robby Candra
86812432f3
Remove extraneous Serial init ( #16794 )
2020-02-06 14:11:49 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test ( #16511 )
2020-02-05 20:33:39 -06:00
Bob Kuhn
78fea4a9ca
Split up MKS_RUMBA32 into two variants ( #16781 )
2020-02-05 20:28:28 -06:00
thinkyhead
bb68eaa69e
[cron] Bump distribution date (2020-02-06)
2020-02-06 00:02:49 +00:00
thisiskeithb
9b4192cdd0
Add MKS Base 1.6 board ( #16783 )
2020-02-04 23:21:05 -06:00
thinkyhead
0ebd2f44d4
[cron] Bump distribution date (2020-02-05)
2020-02-05 00:02:59 +00:00
Scott Lahteine
f312ddfa4f
More updates for 8 extruders, REPEAT
2020-02-04 12:37:20 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
Scott Lahteine
081ef46e76
Fix Arduino IDE compile for DUE
...
Fixes #16767
2020-02-04 08:32:20 -06:00
Scott Lahteine
15b6ad41bc
Fix E stepper stays on bug
...
Fixes #16753
2020-02-04 02:39:37 -06:00
Bob Kuhn
0268c1d02c
STM32duino - Use SDIO for onboard SD ( #16756 )
2020-02-04 01:24:11 -06:00
InsanityAutomation
62d9e3f50e
Force T0 in UBL G29 on all multi-hotend setups ( #16774 )
2020-02-03 20:58:44 -06:00
Scott Lahteine
3ded99b894
[cron] Bump distribution date
2020-02-03 19:53:30 -06:00
felixstorm
f1dbfaf706
Fix warning for ESP32 ( #16771 )
2020-02-03 18:36:51 -06:00
ellensp
7d4fa9d504
Fix LCD Z Move character LCD display line ( #16772 )
2020-02-03 18:35:06 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Scott Lahteine
ee6003be87
Revert breaking change to _FAN_PWM macro
2020-02-01 23:07:20 -06:00
Scott Lahteine
4716dac874
Apply REPEAT, RREPEAT, and loop macros ( #16757 )
2020-02-01 21:00:53 -06:00
Scott Lahteine
0e72c315a0
Minor string storage optimization
2020-02-01 20:29:31 -06:00
Scott Lahteine
4937519d51
Fix LPC build with USE_WATCHDOG off
2020-02-01 20:29:31 -06:00
Scott Lahteine
63469ed8f7
Add EXP labels to SKR pins
2020-02-01 19:06:32 -06:00
Scott Lahteine
22556a7bbf
More 8-extruder fixups
2020-02-01 15:19:58 -06:00
Scott Lahteine
c4cbc54484
Suppress a compile warning
2020-02-01 10:38:07 -06:00
Scott Lahteine
7a4758a6a2
Fix RGB / Neopixel white color bug
...
See #16752
2020-02-01 10:11:36 -06:00
Scott Lahteine
995a9238b3
Probe singleton patch
...
Followup to #16751
2020-02-01 07:57:10 -06:00
Scott Lahteine
5296af94d2
Drop obsolete SD special char handling
...
See #14035
2020-02-01 06:49:56 -06:00
Scott Lahteine
0d342bac51
Fix CURRENT_STEP_DOWN compile error
2020-02-01 06:27:17 -06:00
Acenotass
832d33ce9d
Update Russian language ( #16750 )
2020-02-01 04:53:18 -06:00
Jason Smith
c3cab37d7e
Fix Temperature::over_autostart_threshold ( #16749 )
2020-02-01 04:51:57 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
90b6324563
Encapsulate probe as singleton class ( #16751 )
2020-02-01 04:21:36 -06:00
Scott Lahteine
43d3463d5d
Misc cleanup, whitespace
2020-02-01 03:50:42 -06:00
Scott Lahteine
e64b7a3ab2
Clean up i2c encoder, sanitize serial
2020-02-01 00:57:14 -06:00
Jason Smith
9a8de23858
Consistent M112 with Emergency Parser ( #16747 )
2020-01-31 23:08:37 -06:00
Jason Smith
5b3d968634
Option for Trigorilla 1.4 with add-on endstops board ( #16737 )
2020-01-31 21:51:59 -06:00
rebel1
300b81bfcb
Fix BTT SKR 1.4 extra endstop pins ( #16738 )
2020-01-31 21:46:02 -06:00
Acenotass
0a6ae664bd
Update Russian language ( #16745 )
2020-01-31 21:43:44 -06:00
Scott Lahteine
c4df5cf9a6
Include macros for delta ABC
2020-01-31 04:40:33 -06:00
Scott Lahteine
02f61832c0
Add sanity-check for new Advanced Pause option
...
Followup to #16372
2020-01-30 23:24:40 -06:00
thinkyhead
dabf393920
[cron] Bump distribution date (2020-01-31)
2020-01-31 00:06:46 +00:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Scott Lahteine
62f52ebb3a
Fix up, improve endstop pin auto-assignment
...
Followup for #16723
2020-01-30 14:09:33 -06:00
Scott Lahteine
e8e25b80d1
Extend RX/TX pins for up to 8 extruders
2020-01-30 13:29:19 -06:00
Robert Stein
2822c0890a
Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo ( #16727 )
2020-01-30 13:17:15 -06:00
Alexander Gavrilenko
c45d6b2017
Simultaneous use of rotary encoder and touch buttons ( #16729 )
2020-01-30 12:29:30 -06:00
felixstorm
8d4dd88bf9
Fix compile error in SdVolume on ESP32 ( #16728 )
2020-01-30 12:22:42 -06:00
Scott Lahteine
3c9464eea4
Tweak G60/G61 slots
2020-01-30 03:25:40 -06:00
Scott Lahteine
5b12627e14
Auto assign DIAG pins for multi-endstop ( #16723 )
2020-01-30 03:24:57 -06:00
Scott Lahteine
9caf5c05e7
Refactor heater watch, job timer auto-start ( #16725 )
2020-01-30 03:24:43 -06:00
Scott Lahteine
50889c0f94
Move L64XX index_to_axis to progmem ( #16697 )
2020-01-30 03:24:23 -06:00
chgi
99b6a132bc
Fix G60/G61 slots > 8 and compile error ( #16715 )
2020-01-30 03:18:45 -06:00
Radek Pietruszewski
e6a675e6ec
Fix missing string for M48 build ( #16708 )
2020-01-30 03:13:31 -06:00
Mauro
1bc6509d02
Support for E4d@BOX mainboard ( #16716 )
2020-01-30 03:06:17 -06:00
Neskik
1db9d9f76f
Fix probe temp calibration ( #16718 )
2020-01-30 03:00:38 -06:00
0r31
8737c35ded
Fix HAS_FAN macro ( #16717 )
2020-01-29 22:48:26 -06:00
Scott Lahteine
e8ed4329ea
Cleanup of old includes, add comments
2020-01-29 22:41:18 -06:00
thinkyhead
a5f72330fb
[cron] Bump distribution date (2020-01-30)
2020-01-30 00:06:48 +00:00
InsanityAutomation
9bb8176d34
Fix Toolchange (!no_move) return to status ( #16699 )
2020-01-29 00:06:06 -06:00
thinkyhead
9b45f342ee
[cron] Bump distribution date (2020-01-29)
2020-01-29 00:07:02 +00:00
felixstorm
e4eaf32b4d
Prevent SD access from resetting ESP32 ( #16690 )
2020-01-27 18:16:43 -06:00
thinkyhead
0c3cae59d9
[cron] Bump distribution date (2020-01-28)
2020-01-28 00:06:59 +00:00
Jason Smith
131acf304b
Fix Manual Bed Leveling with multiple extruders ( #16688 )
2020-01-27 15:57:21 -06:00
Scott Lahteine
8bd6b60a01
Remove extraneous G60/G61 lines
2020-01-27 15:40:25 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Robby Candra
a0a93e35ae
Fix serial port redirection (index ≠ port num) ( #16687 )
2020-01-26 22:46:26 -06:00
Scott Lahteine
2325bede8a
Fix Trigorilla 1.4 limit switches
...
See #16612
2020-01-26 21:08:55 -06:00
Scott Lahteine
56cd747c8b
Rename some temperature members
2020-01-26 21:08:55 -06:00
Robby Candra
48098b1675
Preserve CWD for write/remove file ( #16667 )
2020-01-26 18:34:17 -06:00
thinkyhead
f6a6704b66
[cron] Bump distribution date (2020-01-27)
2020-01-27 00:06:35 +00:00
Scott Lahteine
5e3e8fcdb9
Fix PID F menu label
2020-01-26 17:07:18 -06:00
ellensp
0949c0f326
SKR 1.3 sensorless endstops hack ( #16659 )
2020-01-26 03:49:11 -06:00
Giuliano Zaro
81f31efaee
Fix Spanish (swapped BLTouch strings) ( #16637 )
2020-01-26 03:34:58 -06:00
ellensp
c49e987b1e
Fix M43 timer report on AVR ( #16645 )
2020-01-26 03:33:35 -06:00
Roman Moravčík
3572fa22a0
Update Slovak language ( #16646 )
2020-01-26 03:27:08 -06:00
Scott Lahteine
1d1dc8e339
More 8 extruder defines
2020-01-26 03:24:54 -06:00
Scott Lahteine
bbfbcb8a5d
Clean up PID language defines
2020-01-26 03:24:54 -06:00
Jason Smith
44d400db83
Fix HOMING_BACKOFF_MM for DELTA ( #16657 )
2020-01-26 03:16:03 -06:00
ellensp
4a71285c34
Fix Serial defines for M43 on AVR ( #16649 )
2020-01-26 03:05:34 -06:00
Luc
6357619ab2
Add ESP3DLib idletask entry point ( #16658 )
2020-01-26 01:11:30 -06:00
0r31
e3611ad209
Fix MKS Base + Digipot compile error ( #16636 )
2020-01-26 01:08:40 -06:00
Jason Smith
95d5a0c480
Fix DELTA_CALIBRATION_MENU recursive call ( #16656 )
2020-01-26 00:02:06 -06:00
thinkyhead
838a420e27
[cron] Bump distribution date (2020-01-26)
2020-01-26 00:06:19 +00:00
yangwenxiong
248b7dfa59
BigTreeTech GTR V1.0 / Support 8 extruders, heaters, temp sensors, fans ( #16595 )
2020-01-25 02:13:39 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0
Bring configs and drivers.h up to date
2020-01-24 23:17:52 -06:00
Scott Lahteine
b7a67f6f74
Extra debugging for leveling on/off
2020-01-24 23:17:49 -06:00
Scott Lahteine
1c042bbaea
Convert chars only for enabled languages
2020-01-24 15:12:04 -06:00
thinkyhead
899db41a5c
[cron] Bump distribution date (2020-01-24)
2020-01-24 00:07:21 +00:00
thinkyhead
342f65eb8e
[cron] Bump distribution date (2020-01-23)
2020-01-23 00:07:18 +00:00
thinkyhead
fd346c6cd1
[cron] Bump distribution date (2020-01-22)
2020-01-22 00:07:17 +00:00
Ryan
b7f86bffd5
Arc segment radius scaling ( #16551 )
2020-01-21 02:53:26 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
Tanguy Pruvot
c8ac908db2
Release UI on G26 priming timeout ( #16449 )
2020-01-21 01:05:55 -06:00
0r31
b57ef4b261
Override for LPC1768 u8g/digipot I2C master ID ( #16622 )
2020-01-20 20:09:16 -06:00
Bob Kuhn
1a5cbc9052
Fix STM401/4xx/STM32F7xx timers, STEVAL_3DP001V1 warning ( #16621 )
2020-01-20 18:33:36 -06:00
thinkyhead
f36225c3e0
[cron] Bump distribution date (2020-01-21)
2020-01-21 00:07:07 +00:00
InsanityAutomation
97b5a5f469
Provide methods for M420 + MBL ( #16602 )
2020-01-20 01:44:36 -06:00
Bob Kuhn
a1f5245e27
L64xx M906 Fix status variable, formatting ( #16597 )
2020-01-20 01:15:00 -06:00
Giuliano Zaro
ef8f829513
Fix CHAMBER_MAXTEMP security margin ( #16600 )
2020-01-20 00:44:51 -06:00
InsanityAutomation
d9cdb4ae19
Move steps/mm out of slim menus ( #16603 )
2020-01-20 00:43:19 -06:00
0r31
451062553e
LPC1768: Allow I2C master channel override ( #16584 )
2020-01-19 23:59:06 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
0r31
f36f084465
Fix Greek language string ( #16601 )
2020-01-19 23:03:19 -06:00
Jason Smith
439e73d79c
AVR sanity check for MONITOR_DRIVER_STATUS with SW Serial ( #16421 )
2020-01-19 22:25:38 -06:00
ellensp
0547d9d651
Reset shutdown timer on M85 ( #16587 )
2020-01-19 22:24:12 -06:00
thisiskeithb
3b34fbd4c4
Update BTT002 pins ( #16591 )
2020-01-19 22:21:32 -06:00
Giuliano Zaro
aec211fc80
SAMD51: ADC for probe temperature compensation ( #16596 )
2020-01-19 22:17:08 -06:00
Bob Kuhn
1084068a3e
Simplify a drivers.h macro ( #16589 )
2020-01-19 20:59:47 -06:00
Scott Lahteine
e9ae585647
Patch for _STEP_INIT
2020-01-19 20:50:33 -06:00
Scott Lahteine
dda76e50a9
Use bool in pin compare
2020-01-19 20:05:53 -06:00
Scott Lahteine
37849969ad
Function-like macros
2020-01-19 20:01:22 -06:00
Scott Lahteine
707349d492
Updates for L64XX
2020-01-19 19:53:12 -06:00
Scott Lahteine
f6a6839a82
Simplify TMC monitor code
2020-01-19 19:29:30 -06:00
Scott Lahteine
79c2f05e7d
Fix M112 with Emergency Parser
2020-01-19 19:00:24 -06:00
thinkyhead
4dca6d50c0
[cron] Bump distribution date (2020-01-20)
2020-01-20 00:06:48 +00:00
thinkyhead
23fc81f1af
[cron] Bump distribution date (2020-01-19)
2020-01-19 00:07:06 +00:00
Scott Lahteine
d035bfb1a9
Allow RRW Keypad with any LCD
2020-01-18 14:48:24 -06:00
thinkyhead
80400ab3f8
[cron] Bump distribution date (2020-01-18)
2020-01-18 00:04:25 +00:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
vivian-ng
e94f782f51
Shared SPI sanity check ( #16581 )
2020-01-17 02:54:22 -06:00
Scott Lahteine
a578749622
Clean up HAL ADC, old test scripts
2020-01-17 02:44:01 -06:00
Bob-the-Kuhn
0d0dfba203
STM32 soft SPI. STEVAL_3DP001V1 SD read. M906 tweaks. ( #16579 )
2020-01-17 02:44:01 -06:00
thinkyhead
91a399ae7f
[cron] Bump distribution date (2020-01-17)
2020-01-17 00:06:39 +00:00
felixstorm
2b9eb4437b
ESP32 HAL: Fix random pauses during prints ( #16548 )
2020-01-16 05:57:14 -06:00
ellensp
5bd66241df
Fix TOUCH_UI_FTDI_EVE bugs ( #16540 )
2020-01-16 05:50:00 -06:00
Scott Lahteine
1bb1ce7475
Move macros to stepper/indirection
2020-01-16 05:25:16 -06:00
