0dd1c4458d
Put more code between pulse start and stop ( #9959 )
2018-03-05 23:06:57 -06:00
07ae23fe14
No pulse delay on last e_steps in advance isr
2018-03-04 15:06:31 -06:00
ed758de80d
tweak comment in stepper.cpp
2018-03-04 04:03:23 -06:00
6d7f4f84e2
Add board MKS_BASE_HEROIC ( #9926 )
...
Followup to #9008
- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:52 -06:00
cb4cb86d80
Useless line removed ( #9814 )
...
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
2018-02-25 21:20:37 -06:00
813f9f3082
[bugfix_2.0.x] - LIN_ADVANCE V1.5 stepper.cpp ( #9797 )
...
Removal of obsolete (i) from port of LIN_ADVANCE from V1.1.x to V2..0.x.
2018-02-24 16:37:23 -06:00
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
3d1692d1fd
Fix X2 enable with X_DUAL_STEPPER_DRIVERS
...
From #9286
2018-02-18 22:50:47 -06:00
03d790451f
[2.0.x] HAL timer set/get count => set/get compare ( #9581 )
...
To reduce confusion over the current timer count vs. the compare (aka "top") value. Caution: this re-uses the function name, changing its meaning.
2018-02-10 20:42:00 -06:00
d168ee9bed
Drop leveling include from steppers.cpp
2018-02-08 01:32:19 -06:00
887664aa61
Restore broken Dual X Carriage
2018-01-20 15:08:50 -06:00
50366b00d5
Tweak cleaning buffer / SD finished command
2017-12-24 20:35:05 -06:00
8df5955da4
Revert "Reset timer count before first block step"
...
This reverts commit 5cf6a062e3
.
2017-12-17 02:37:35 -06:00
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
cf2193c07f
Comment, fix filament width sensor
2017-12-13 02:32:34 -06:00
73e32925e4
References are better for array args
2017-12-11 00:27:06 -06:00
5cf6a062e3
Reset timer count before first block step
2017-12-10 18:38:53 -06:00
82ef6b5242
Add an option to specify "pulse" timer
2017-12-10 18:38:53 -06:00
4fa65a5c25
TCNT0 => HAL_timer_get_current_count
...
Fix #8710
2017-12-08 22:35:28 -06:00
85c6ffbe0d
Discard all "continued" blocks on interrupted move
2017-12-08 02:32:58 -06:00
9898b96992
No lcd_map_control flag in quick_stop
2017-12-06 22:23:34 -06:00
840289e7cc
Use block cleaning instead of split flag
2017-12-06 22:22:58 -06:00
2fde60da12
Changes for parity with 1.1.x
2017-12-06 21:50:54 -06:00
6040d4080e
Cleanup stepper ISR. Allow cleaning for endstops.
2017-12-06 21:23:37 -06:00
000b3b3117
Comment/cleanup of motion code
2017-12-02 01:09:55 -06:00
1d4571b88d
Dependency adjustments
2017-11-19 15:43:38 -06:00
2246316605
Fix name collision. timer_t => hal_timer_t
2017-11-05 19:31:07 -06:00
723f2a77f6
Implement support for Dual X and Y endstops
2017-10-29 18:56:04 -05:00
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
2017-10-16 16:29:37 -05:00
03f4891fb9
Remove legacy ADVANCE feature
2017-10-09 04:25:18 -05:00
46b2773e13
General fixes for LPC1768 ( #7834 )
...
* fixed some include paths
* LPC1768: Fix Serial API
Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API
* LPC1768: add filters to ADC
This is to try and compensate for hardware issue and oversensitivity to noise
* LPC1768: remove the polling section of delayMicroseconds
* LPC1768: lock usb mass storage device while device accesses it.
Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.
* Add timeout to make sure if Serial never connects that Marlin still boots
* Remove unneeded ifdef CPU_32_BIT
In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform
* LPC1768: relocate RE-ARM debug_extra_script.py
2017-10-04 15:40:54 -05:00
965b0ab53e
Spacing adjustments
2017-10-01 21:58:50 -05:00
ac41eb5871
Merge pull request #7722 from tcm0116/2.0.x-warnings
...
Cleanup 2.0.x compiler warnings
2017-10-01 21:56:54 -05:00
0cb00f52d9
Cleanup warnings
2017-09-30 16:47:17 -05:00
1beaef0452
fix 3S hang & enable SPLIT
2017-09-30 10:27:41 -05:00
f58ba3a64e
Improve AVR arch detection
...
Replace ARDUINO_ARCH_AVR with __AVR__ to better detect architecture for non-Arduino dev environments. Resolves compile failure in PIO for 8-bit Teensduino targets
More info:
https://forum.pjrc.com/threads/33234-Using-Teensyduino-Selecting-Teensy-3-2-3-1-board-has-incorrect-platform-define
http://www.atmel.com/webdoc/avrlibcreferencemanual/using_tools_1using_avr_gcc_mach_opt.html
2017-09-23 21:36:40 -07:00
551752eac7
Consolidate "bedlevel" code
2017-09-21 16:26:47 -05:00
722786966a
Add gcode.cpp, motion.*, queue.* - Apply to some G-codes.
2017-09-21 16:26:45 -05:00
3d8a0ab4b2
Module updates
2017-09-21 16:26:42 -05:00
0c9231fd04
Move 'module' files
2017-09-12 14:51:05 -05:00