dd301be52d
Added suport for multiline G-code commands in the LCD menus
2015-01-26 18:50:29 +01:00
aa48056c03
Made centering of bootlogo work and removed contraproductiv setScale2x2() in dogm_lcd_implementation.h
2015-01-26 17:26:22 +01:00
0d219b3e14
Make centering of STRING_SPLASH work
2015-01-26 16:00:10 +01:00
59315330dd
Remove definition of VERSION_STRING and replace where usend with STRING_VERSION
2015-01-26 15:52:01 +01:00
8c792c7b22
Make STRING_VERSION and VERSION_STRING the same
2015-01-26 15:40:44 +01:00
865ca0ef04
Merge pull request #1405 from MagoKimbra/4th-extruders
...
All the additions look proper. I can't think of any other extruder-count-related items that you might have missed. So, with some optimism, I will merge this for testing.
2015-01-25 19:30:51 -08:00
3021f7f743
Fix PID_dT
...
Add PID_dT in temeprature.cpp
2015-01-25 17:56:14 +01:00
a7b02975b7
No TEMP1 or TEMP2 pins for TEENSYLU || PRINTRBOARD
...
Pins 2 and 3 are probably general-use pins, since the filament sensor
uses pin 2.
2015-01-24 05:10:48 -08:00
6723388f7f
Proposed fix to #1379 . Printrboard I2C LCD support
2015-01-24 05:01:02 -08:00
03c9cb60e8
Rename lastnr to autostart_index and...
...
Replace instances of the number 13 with FILENAME_LENGTH where
appropriate.
2015-01-24 04:57:44 -08:00
ef5959a705
Fix Temperature
...
Githun insert this line when i merge with actual Branch development...
2015-01-24 13:49:29 +01:00
3d4ee6c868
Merge branch '4th-extruders' of https://github.com/MagoKimbra/Marlin into 4th-extruders
...
Conflicts:
Marlin/temperature.cpp
2015-01-24 13:41:15 +01:00
986e723eeb
Add 4th extruder
2015-01-24 13:37:58 +01:00
f16bdd2ff2
Borrow from Ultimaker to fix MAX6675 SPI conflict
...
Changes to temperature.cpp from Ultimaker fork, intended to address
#1226 and #1227
2015-01-24 03:49:15 -08:00
06c3b37933
Formatting cleanup of quiet sources
...
Formatting for code-folding plus minor style changes to less active
code.
2015-01-23 22:26:52 -08:00
23fcd1ecb2
Merge pull request #1407 from thinkyhead/cleanup_marlinserial
...
Formatting cleanup of quiet sources
2015-01-23 21:33:43 -08:00
fd78902194
Formatting cleanup of quiet sources
2015-01-23 21:11:50 -08:00
5c1814383a
Merge pull request #1390 from floyd871/Development
...
Show Custom M_Code for Z-Probe Offset when entering M503
2015-01-23 20:08:23 -08:00
0ebf896070
Add 4th extruder
2015-01-23 23:13:06 +01:00
a9d7ab9530
Update ConfigurationStore.cpp
...
Done
2015-01-23 21:05:27 +01:00
3a9a3e5ed8
Fix Issue #1356 – remove EXTRUDER1_Z_OFFSET
...
This define is not used.
2015-01-23 10:51:06 -08:00
54d5b52a2e
Merge pull request #1399 from beanz/use-bed-defines-not-extruder-ones
...
Code wont compile with extruder but without bed runaway protection defined.
2015-01-23 08:36:25 -08:00
0ce252ba7a
This ifdef is for bed code so should use bed constants for testing.
...
Without this fix, the code wont compile with extruder but without bed
runaway protection defined.
2015-01-23 16:30:13 +00:00
9040446780
Merge pull request #1395 from AnHardt/iss1394
...
removed function step_wait() from stepper.cpp
2015-01-23 06:58:10 -08:00
25f79c5010
Merge pull request #1391 from CONSULitAS/Development-newBoard_K8200
...
Add: Board for Vellemann K8200 (derived from 3Drag)
2015-01-23 06:08:38 -08:00
9ce75ab7de
Merge pull request #1386 from roglio/Development
...
Fixing a build error for melzi and gfx display
2015-01-23 06:00:24 -08:00
15a00a5a7c
Add 1µs delay in other appropriate spots
2015-01-23 03:24:45 -08:00
23cb899c5a
removed function step_wait() from stepper.cpp
...
removed function step_wait() from stepper.cpp because its used nowhere.
2015-01-21 16:30:45 +01:00
d9d4a78e0f
Add proper delay in stepper.cpp
...
Issue #1385 describes a delay that the compiler is optimizing out and
this solution.
2015-01-21 01:51:29 -08:00
d1322dafc9
Add: Example Configuration for Vellemann K8200 - based on new BOARD_K8200 #1391
...
# Add: Example Configuration for Vellemann K8200 - based on new
BOARD_K8200 #1391
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag http://reprap.org/wiki/3drag , too. Please
report)
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2"
based on the recent development branch
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows (SD library added to IDE manually) - everything works well
2015-01-20 23:13:44 +01:00
3b50a5e2e6
Add: Board for Vellemann K8200 (derived from 3Drag)
...
## Add: Board for Vellemann K8200 (derived from 3Drag)
* Boards.h: updated comment for board 3Drag - K8200 removed
* Boards.h: added `BOARD_K8200` with ID 78
* language.h.: machine name and firmware URL for new board
* pins.h: added `K8200` to any `#if` with `3Drag` and corresponding
comments
2015-01-20 20:46:20 +01:00
2d454da3af
Update ConfigurationStore.cpp
...
Show Custom M Code when entering M503
2015-01-20 16:21:44 +01:00
4f35de991a
Merge pull request #1383 from CONSULitAS/Development
...
Update Boards.h for Vellemann K8200 - comment only
2015-01-19 15:59:38 -08:00
22571ca13d
Revert "Configuration for Aurora Z605"
...
This reverts commit 935ee968a7
2015-01-19 15:02:11 +01:00
935ee968a7
Configuration for Aurora Z605
...
Still not fine tuned but working.
2015-01-19 11:18:52 +01:00
ccdbeda526
Fixing a build error for melzi and gfx display
...
When a melzi board and a full gfx are both selected, the build fails
blaming for some missing defines.
This is a fix for the issue: now my configuration works.
2015-01-19 10:43:26 +01:00
e13f159343
Update Boards.h for Vellemann K8200 - comment only
...
## Update Boards.h for Vellemann K8200 - comment only
* Boards.h: updated comment for board 3Drag - K8200 uses same board
2015-01-19 00:53:17 +01:00
51c7f2fd5a
Revert "## Add: Example Configuration for Vellemann K8200"
...
This reverts commit 5333590ac2
2015-01-19 00:37:57 +01:00
5333590ac2
## Add: Example Configuration for Vellemann K8200
...
* K8200: new folder in example_configurations for Vellemann K8200 (3Drag
clone - should work with 3Drag too, please report)
* K8200/language.h: updated machine name and URL for K8200
* K8200/Configuration.h/Configuration_adv.h: updated manually with
parameters
form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the
recent development branch
* K8200/files by Vellemann: added folder with original files from
Vellemann homepage, since there is no GitHub fork you could link to by
them
I tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for
Windows - everything works well
2015-01-19 00:28:55 +01:00
ba3ac40b9d
Remove hardcoded programmer option (-cwiring). Use variable AVRDUDE_PROGRAMMER.
...
Change default value of AVRDUDE_PROGRAMMER to 'wiring'.
2015-01-18 20:18:43 +03:00
53f971095d
Revert "Reduce PROGMEM warnings"
2015-01-16 16:48:22 +01:00
67b597ad46
Update printrboard pin assignments
...
Backported from Printrbot branch, allows the fan to work correctly.
2015-01-15 19:48:40 -08:00
d4880a9e60
Revert "Move Sd library out into library"
2015-01-15 18:52:10 -05:00
ccdb086fc8
Merge pull request #1363 from PxT/patch-1
...
Fixes #1361
2015-01-15 10:57:44 +01:00
5151db5c2f
Merge pull request #1349 from msutas/patch-2
...
Improvement - G29 Option for Not Retracting Servo
2015-01-15 10:56:31 +01:00
1746b2582b
Merge pull request #1332 from Sniffle/Development
...
Rambo FAN_PIN documentation and servo support
2015-01-15 10:56:17 +01:00
4b51b5a46d
Merge pull request #1357 from odewdney/SDlib
...
Move Sd library out into library
2015-01-15 10:56:07 +01:00
f2cb4a3655
Merge pull request #1353 from thawkins/Development
...
fix avrdude upload in makefile
2015-01-15 10:55:33 +01:00
9fd4292923
Fixes #1361
2015-01-13 10:59:50 -08:00
f84ff4ba7d
Move SD Fat library out of main src
2015-01-13 13:31:55 +00:00
